Electrical Sum (T-2)

BILL OF QUANTITIES FOR ELECTRICAL WORKS FOR NDRF AT BIHTA, PATNA

TYPE II QTRS.
SUMMARY OF ELECTRICAL WORKS
S. No. Description Amount

1.0 ELECTRICAL DSR ITEM 13,577,011.00

2.0 ELECTRICAL NON DSR ITEN 4,845,985.00

3.0 ELECTRICAL LED LIGHT FIXTURES 964,356.00

GRAND TOTAL EXCLUDING GST 19,387,352.00

Page 1 of 23
 Elec DSR (T-2)
BILL OF QUANTITIES FOR ELECTRICAL WORKS FOR NDRF AT BIHTA, PATNA, BIHAR
(DSR ITEM)

S. No. DSR - 2014 DESCRIPTION OF ITEM UNIT Revised Qty RATE AMOUNT (DSR)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5
sq.mm FRLS PVC insulated copper conductor single core cable in surface /
recessed medium class PVC conduit, with modular switch, modular plate,
1.0 1.10 suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated
copper conductor single core cable etc as required.

1.10.1 Group A Point 3690 642.00 2,368,980.00

1.10.2 Group B Point -
1.10.3 Group C Point -
- -
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated
copper conductor single core cable in surface / recessed medium class
PVC conduit, 2 way modular switch, modular plate, suitable GI box and
2.0 1.11 earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor Point 70 930.00 65,100.00
single core cable etc as required.

- -
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper
conductor single core cable in surface/ recessed medium class PVC
3.0 1.12 conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor Metre 12000 212.00 2,544,000.00
single core cable for loop earthing as required.

- -
Wiring for circuit/ submain wiring alongwith earth wire with the following
4.0 1.14 sizes of FRLS PVC insulated copper conductor, single core cable in surface/ - -
recessed medium class PVC conduit as required
CIRCUIT / SUBMAIN WIRING - -
a 1.14.2 2x2.5 sq mm + 1x2.5 sq mm earth wire Metre 15000 176.00 2,640,000.00
b 1.14.4 2x6 sq mm + 1x6 sq mm earth wire. Metre 100 275.00 27,500.00
c 1.14.5 2x10 sq mm + 1x10 sq mm earth wire. Metre 2780 410.00 1,139,800.00
d 1.14.9 4x6 sq mm + 2x6 sq mm earth wire. Metre -
e 1.14.10 4x10 sq mm + 2x10 sq mm earth wire. Metre -
f 1.14.11 4x16 sq mm + 2x16 sq mm earth wire. Metre -
- -

Page 1 of 23
 Elec DSR (T-2)
Supplying and drawing 2 pair 0.5 mm dia FRLS PVC
5.0 1.18 insulated annealed copper conductor, unarmored telephone cable in the - -
existing surface/ recessed steel/ PVC conduit as required.
a 1.18.2 2 Pair Metre 4400 20.00 88,000.00
- -
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper
conductor PE insulated, shielded with fine tinned copper braid and
6.0 1.19 protected with PVC sheath in the existing surface/ recessed steel/ PVC Metre 4300 30.00 129,000.00
conduit as required.

- -
Supplying and fixing of following sizes of PVC conduit along with the
accessories in surface/recess including painting in case of surface conduit,
7.0 1.21 or cutting the wall and making good the same in case of recessed conduit - -
as required.

a 1.21.1 20mm dia Metre 4400 63.00 277,200.00

b 1.21.2 25mm dia Metre 4300 76.00 326,800.00
- -
Supplying and fixing following modular switch/ socket on the existing
8.0 1.24 modular plate & switch box including connections but excluding modular - -
plate etc. as required.
a 1.24.6 Telephone Socket Outlet Each 280 112.00 31,360.00
b 1.24.7 TV anteena Socket Outlet Each 280 112.00 31,360.00
c 1.24.1 5/6 amps switch Each 1260 95.00 119,700.00
d 1.24.3 15/16 amp switch Each 1162 131.00 152,222.00
e 1.24.4 3 pin 5/6 amp socket outlet Each 1260 94.00 118,440.00
f 1.24.5 6 pin 15/16 amp socket outlet Each 1162 181.50 210,903.00
- -
Supplying and fixing following size/ modules, GI box alongwith modular
9.0 1.27 base & cover plate for modular switches in recess etc as required. - -

a 1.27.2 3 Module (100mmX75mm) - For Socket outlet. Each 2562 203.00 520,086.00
b 1.27.4 6 Module (100mmX75mm) - For Socket outlet. Each -
- -
Supplying and fixing following size/ modules, GI box alongwith modular
10.0 1.27 base & cover plate for modular switches in recess etc as required. - -

a 1.27.1 1 Module (75mmX75mm) - For Telephone & TV outlet. Each 560 199.00 111,440.00
- -

Page 2 of 23
 Elec DSR (T-2)
Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/
11.0 1.33 wooden block including connection etc as required. Each 2 50.00 100.00
- -
Supplying and fixing brass batten/ angle holder including
12.0 1.34 connection etc. as required. Each 2 85.00 170.00
-
Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts,
13.0 1.38 complete as required. Each 140 78.00 10,920.00
- -
Supplying and fixing modular blanking plate on the existing modular plate
14.0 1.26 & switch box excluding modular plate as required. Each 200 23.00 4,600.00
- -
Supplying and fixing stepped type electronic fan regulator on the existing
15.0 1.25 modular plate switch box including connections but excluding modular Each 400 345.00 138,000.00
plate etc. as required.
- -
Installation, testing and commissioning of ceiling fan, including wiring the
down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC
insulated, copper conductor, single core cable, including providing and
16.0 1.45 fixing phenolic laminated sheet cover on the fan box etc. as required. Each 400 145.00 58,000.00

- -
Installation of exhaust fan in the existing opening, including making good
17.0 the damage, connection, testing, commissioning etc. as required. - -

a 1.50.1 Upto 450 mm sweep Each 400 235.00 94,000.00

- -
Extra for fixing the louvers/ shutters complete with frame for a exhaust
18.0 1.51 fan of all sizes. Each 400 110.00 44,000.00
- -
Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet,
with 2 pole and earth, metal enclosed plug top alongwith 20 amps “C”
curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with
19.0 2.18 chained metal cover for the socket out let and complete with connections, Each 400 1,175.00 470,000.00
testing and commissioning
etc. as required.

- -

Page 3 of 23
 Elec DSR (T-2)
Supplying and fixing of following sizes of STEEL conduit alonwith the
accessories in surface/recess including painting in case of surface conduit,
20.0 1.20 or cutting the wall and making good the same in case of recessed conduit - -
as required.

a 1.20.1 20mm dia Meter 400 147.00 58,800.00

b 1.20.2 25mm dia Meter 400 170.00 68,000.00
- -
Wiring with the following sizes of FRLS insulated copper conductor single
21.0 core cables in existing surface/recessed M.S. conduit etc. as complete as - -
required
a 1.17.2 2 x 1.5 sq.mm Meter 800 44.00 35,200.00
b 1.17.12 3 x 2.5 sq.mm (For Lift Shaft) Meter 110 92.00 10,120.00
c 1.17.21 3 x 4.0 sq.mm (For Lift Shaft) Meter 110 135.00 14,850.00
- -
Supplying and fixing following way, single pole and neutral, sheet steel,
MCB distribution board, 240 volts, on surface/ recess, complete with
tinned copper bus bar, neutral bus bar, earth bar, din bar,
22.0 2.3 interconnections, powder painted including earthing etc. as required. (But - -
without MCB/RCCB/Isolator)

a 2.3.8 12 Way (2+12), Double Door Each 10 1,650.00 16,500.00

b 2.3.7 8 Way (2+8), Double Door Each 200 1,375.00 275,000.00
- -
Supplying and fixing following way, horizontal type three pole and neutral,
sheet steel, MCB distribution board, 415 volts, on surface/recess,
complete with tinned copper bus bar, neutral bus bar, earth bar, din bar,
23.0 2.4 interconnections, powder painted including earthing etc. as required. (But - -
without MCB/RCCB/Isolator)

a 2.4.6 4 Way (4+24), Double Door Each -

b 2.4.6 6 Way (4+24), Double Door Each -
c 2.4.6 8 Way (4+24), Double Door Each -
- -
Supplying and fixing of following rating 240 volts, C series MCB suitable for
inductive loads of following poles in the existing MCB DB complete with
24.0 2.10 connections, testing and commissioning etc.,as required. - -

a 2.10.1 5 to 32 A SP MCB Each 1400 203.00 284,200.00

b 2.10.3 25 A DP MCB Each -
- -

Page 4 of 23
 Elec DSR (T-2)
Supplying and fixing following rating, double pole, 240 volts, isolator in the
25.0 2.12 existing MCB DB complete with connections, testing and commissioning - -
etc. as required.
a 2.12.1 40 Amp Each 2 265.00 530.00
b 2.12.2 63 Amp Each 140 305.00 42,700.00
- -
Supplying and fixing following rating, four pole, 415 volts, isolator in the
26.0 2.13 existing MCB DB complete with connections, testing and commissioning - -
etc. as required.
a 2.13.1 40 Amp Each -
b 2.13.2 63 Amp Each -
- -
Supplying and fixing of following rating double pole 240 volts, resudual
current circuit breaker (RCCB), having a sensivity current up to 300
27.0 2.14 miliampere in the existing MCB DB complete with connections, testing & - -
commissioning etc. as required.

a 2.14.1 25 Amps Each 2 2,050.00 4,100.00

b 2.14.2 40 Amps Each 2 2,090.00 4,180.00
c 2.14.3 63 Amps Each 140 2,670.00 373,800.00
- -
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick
including accessories, and providing masonry enclosure with cover plate
28.0 5.6 having locking arrangement and watering pipe of 2.7 metre long etc. with Nos -
charcoal/ coke and salt as required.

- -
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including
accessories, and providing masonry enclosure with cover plate having
29.0 5.4 locking arrangement and watering pipe of 2.7 metre long etc. with Nos 20 5,590.00 111,800.00
charcoal/ coke and salt as required.

- -
Providing, Fixing, Testing & Commissioning of following copper strip wire
30.0 on surface of wall/ trench including insulator with heat shrinkable sleeves - -
etc. as required.
Providing and fixing earth bus of 50 mm x 5 mm copper strip on surface
a 5.20 for connections etc. as required. Metre -
Providing and fixing 25 mm x 5 mm copper strip on surface or in recess for
b 5.14 connections etc. as required. Metre -
- -

Page 5 of 23
 Elec DSR (T-2)
Providing, Fixing, Testing & Commissioning of following G.I. Strip/ G.I.
31.0 wire on surface of wall/ trench etc. as required. - -
Providing and fixing 50 mm X 5 mm G.I. strip on surface or in recess for
a 2 x 5.15 connections etc. as required Metre 220 345.00 75,900.00
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for
b 5.15 connections etc. as required Metre 560 170.00 95,200.00
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop
c 5.18 earthing along with existing surface/ recessed conduit/ submain wiring/ Metre 120 28.00 3,360.00
cable as required.
- -
Providing and fixing of lightning conductor finial, made of 25 mm dia 300
mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick
32.0 6.2 G.I. base plate including holes etc. complete as required. Each 4 440.00 1,760.00

- -
Jointing copper / G.I. tape (with another copper/ G I tape, base of the
33.0 6.4 finial or any other metallic object) by riveting / nut bolting/sweating and Each 180 85.00 15,300.00
soldering etc as required.
- -
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of
34.0 6.7 wall for lightning conductor complete as required. (For horizontal run) Metre 560 82.00 45,920.00

- -
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of
35.0 6.8 wall for lightning conductor complete as required. (For Vertical run) Metre 380 115.00 43,700.00

- -
Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip,
36.0 6.12 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers Each 16 85.00 1,360.00
etc. complete as required.
- -
Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly
37.0 6.14 in ground as required. Metre 120 162.00 19,440.00
- -
Providing and fixing testing joint, made of 20 mm X 3 mm thick copper
38.0 6.11 strip, 125 mm long, with 4 nos. of tinned brass bolts, nuts, chuck nuts and Each 16 235.00 3,760.00
spring washers etc. complete as required.
- -

Page 6 of 23
 Elec DSR (T-2)
Supply and making end termination with brass single compression glands
and aluminium lugs following sizes of XLPE insulated and PVC sheathed/
39.0 9.1 XLPE aluminium conductor cable of 1.1 KV grade of the following sizes as - -
required.

39.1 9.1.30 3½ X 300 sq. mm (70mm) Each -

39.2 9.1.29 3½ X 240 sq. mm (62mm) Each -
39.3 9.1.27 3½ X 185 sq. mm (57mm) Each -
39.4 9.1.25 3½ X 120 sq. mm (45mm) Each -
39.5 9.1.24 3½ X 95 sq. mm (45mm) Each -
39.6 9.1.23 3½ X 70 sq. mm (38mm) Each -
39.7 9.1.22 3½ X 50 sq. mm (35mm) Each -
39.8 9.1.21 3½ X 35 sq. mm (32mm) Each -
39.9 9.1.20 4 X 25 sq. mm (28mm) Each -
39.10 9.1.33 4 X 16 sq. mm (28mm) Set 8 290.00 2,320.00
39.11 9.1.32 4 X 10 sq. mm (25mm) Set 4 235.00 940.00
39.12 9.1.1 2 X 10 sq. mm (19mm) Each -
39.13 9.1.2 2 X 6 sq.mm (19 mm) Each -
- -
Supplying and installing following size of perforated pre-painted M.S.
cable trays with perforation not more than 17.5%, in convenient sections,
joined with connectors, suspended from the ceiling with M.S. suspenders
40.0 4.1 including bolts & nuts, painting suspenders etc as required. - -

a 4.1.2 150 mm x 50 mm x 1.6 mm. Meter 70 630.00 44,100.00

b 4.1.4 300 mm x 50 mm x 1.6 mm. Meter 50 960.00 48,000.00
- -
Supplying and installing following size of perforated pre-painted M.S.
cable trays bends with perforation not more than 17.5%, joined with
connectors, suspended from the ceiling with M.S. suspenders including
41.0 4.2 bolts & nuts, painting suspenders etc as required. - -

a 4.2.2 150 mm x 50 mm x 1.6 mm. Set 8 1,175.00 9,400.00

b 4.2.4 300 mm x 50 mm x 1.6 mm. Set 4 1,775.00 7,100.00
- -
Supplying and installing following size of perforated pre-painted M.S.
cable trays reducers with perforation not more than 17.5%, joined with
connectors, suspended from the ceiling with M.S. suspenders including
42.0 4.3 bolts & nuts, painting suspenders etc as required. - -

Page 7 of 23
 Elec DSR (T-2)
a 4.3.2 150 mm x 50 mm x 1.6 mm. Set 4 1,645.00 6,580.00
b 4.3.4 300 mm x 50 mm x 1.6 mm. Set 4 2,540.00 10,160.00
- -
Supplying and installing following size of perforated pre-painted M.S.
cable trays Tee’s with perforation not more than 17.5%, joined with
43.0 4.4 connectors, suspended from the ceiling with M.S. suspenders including - -
bolts & nuts, painting suspenders etc as required.

a 4.4.2 150 mm x 50 mm x 1.6 mm. Set 2 2,050.00 4,100.00

b 4.4.4 300 mm x 50 mm x 1.6 mm. Set 2 3,290.00 6,580.00
- -
44.0 MV CABLE LAYING- - -
- -
Laying of one number PVC insulated and PVC sheathed / XLPE power cable
of 1.1 KV grade of following size direct in ground including excavation,
44.1 7.1 sand cushioning, protective covering and refilling the trench etc as - -
required.

a 7.1.1 Upto 35 sq. mm Meter -

b 7.1.2 Above 35 sq. mm and upto 95 sq. mm Meter -
c 7.1.2 Above 95 sq. mm and upto 185 sq. mm Meter -
d 7.1.2 Above 185 sq. mm and upto 400 sq. mm Meter -
- -
Laying of one number additional PVC insulated and PVC sheathed / XLPE
power cable of 1.1 KV grade of following size direct in ground in the same
trench in one tier horizontal formation including excavation, sand
44.2 7.2 cushioning, protective covering and refilling the trench etc as required. - -

a 7.2.1 Upto 35 sq. mm Meter -

b 7.2.2 Above 35 sq. mm and upto 95 sq. mm Meter -
c 7.2.2 Above 95 sq. mm and upto 185 sq. mm Meter -
d 7.2.2 Above 185 sq. mm and upto 400 sq. mm Meter -
- -
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE
44.3 7.8 power cable of 1.1 KV grade of following size on cable tray as required. - -

a 7.8.1 Upto 35 sq. mm (clamped with 1mm thick saddle) Meter 310 23.00 7,130.00
- -

Page 8 of 23
 Elec DSR (T-2)
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4
coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse
sand : 4 graded stone aggregate 20 mm nominal size), foundation
concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded
stone aggregate 40 mm nominal size), inside plastering 12 mm thick with
cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat
45.0 19.7 of neat cement and making channels in cement concrete 1:2:4 (1 cement : - -
2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished
with a floating coat of neat cement complete as per standard design :

Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light
duty) 455x610 mm internal dimensions, total weight of cover and frame
45.1 19.7.1 to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 - -
kg) :

With common burnt clay F.P.S. (non modular) bricks of class designation
45.1.1 19.7.1.1 7.5 Each 8 9,750.00 78,000.00
- -
Providing, laying & fixing following dia RCC pipe NP2 class (light duty) in
ground complete with RCC collers, jointing with cement mortor 1:2 (1
46.0 14.14 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc. as - -
required.

a 14.14.2 150 mm dia. R.C.C. pipe Meter 30 470.00 14,100.00

b 14.14.3 250 mm dia. R.C.C. pipe Meter 20 550.00 11,000.00
- -
Providing and fixing MV danger notice plate of 200 mm x 150 mm made
47.0 DSR-2014- of mild steel at least 2mm thick & vitreous enamelled white on both Nos. 2 170.00 340.00
2.21 sides and with inscription in signal red colour on front side as required.

- -
48.0 SOLAR PHOTO VOLTAIC POWER GENERATION SYSTEM - -
Supplying installation testing and commissioning of Grid interactive roof
DSR - PAR - top solar photo voltaic power generation system i/c space frame. KW -
2014 -9.0

- -
49.0 11 KV END TERMINATION: - -
- -

Page 9 of 23
 Elec DSR (T-2)
Supply & making of INDOOR cable end termination with heat shrinkable
DSR-2014- jointing kit complete with all accessories including lugs suitable for
49.1 10.4 following size of 3 core XLPE aluminium conductor cable of 11 KV grade as - -
required.

49.1.1 10.4.3 3C x 185 Sqmm, 11KV XLPE Set -

- -
Supply & making of OUTDOOR cable end termination with heat shrinkable
DSR-2014- jointing kit complete with all accessories including lugs suitable for
49.2 10.5 following size of 3 core XLPE aluminium conductor cable of 11 KV grade as - -
required.

49.2.1 10.5.3 3C x 185 Sqmm, 11KV XLPE Set -

- -
50.0 HT CABLE LAYING: - -
DSR-2014- Laying of one number XLPE power cable of 11 KV grade of following size in
50.1 8.8 the existing masonry open duct as required. - -
50.1.1 8.8.2 Above 120 sq. mm and upto 400 sq. mm Meter -
- -
Laying of one number PVC insulated and PVC sheathed / XLPE power cable
50.2 DSR-2014- of 11 KV grade of following size direct in ground including excavation, - -
8.1 sand coshioning, protective covering and refilling the trench etc. as
required.

50.2.1 8.1.2 Above 120 sq. mm and upto 400 sq. mm Meter -

TOTAL OF DSR ITEM EXCLUDING GST 13,577,011.00

Page 10 of 23
 Elec NSR (T-2)
BILL OF QUANTITIES FOR ELECTRICAL WORKS FOR NDRF AT BIHTA, PATNA, BIHAR
(NON DSR ITEM)
S. No. DESCRIPTION OF ITEM UNIT Revised BOQ Qty RATE AMOUNT (NSR) Remarks

S.H.-I DISTRIBUTION PANEL & DISTRIBUTION BOARDS-

Design, Manufacturing, Supply, Receiving, Unloading, Shifting, installation,

testing & commissioning of cubicle type totally enclosed free standing type
moisture, dust and vermin proof Floor Distribution Panel made out of 2.0 mm
thick & front cover 1.6 mm thick CRCA sheet complete with following
equipments, including digital ammeter with inbuilt ammeter selector switch,
digital voltmeter with inbuilt voltmeter selector switch, indicating lamps, CT's,
internal wiring with suitable size wires / cable, interconnection, painting
complete as per specification & drawing. All the incomming and outgoing MCCB
1.0 shall have 35 KA Ics. All the MCCB up to 250 Amp shall have thermal release with
adustable overload and short circuit protection and above shall have
microprocessor release with adjustable overload, short circuit & earthfault
protection.

1.1 METER BOARD -1 (TYPICAL-TYPE-II)

INCOMING
1 No. 100 Amp FP Moulded Case Circuit Breaker.
1 No.0 to 500 Volt digital voltmeter with selector switch.
1 No.0 to 100 Amp digital Ammeter with selector switch and CT's.
1Set of phase indicating lamps with HRC fuses.
1Set of ON/OFF indicating lamps with HRC fuses.
1 No. Digital KWH Meter.

BUSBAR

150Amp TPN aluminium busbar with coloured heat shrinkable sleeve.

OUTGOING
8 Nos. 63 Amp DP Miniature Circuit Breaker with Electronic Single Phase Energy
Meter. All the meter shall have maximum recorder facility.
Panel described as above Set 18 60,800.00 1,094,400.00
- -
- -
1.3 LIFT PANEL -TYPICAL (TYPE-II&III) - -
- -
Page 1 of 23
 Elec NSR (T-2)
INCOMING - -
1 No. 100 Amp FP Moulded Case Circuit Breaker. - -
1 No.0 to 500 Volt digital voltmeter with selector switch. - -
1 No.0 to 100 Amp digital Ammeter with selector switch and CT's. - -
1Set of phase indicating lamps with HRC fuses. - -
1Set of ON/OFF indicating lamps with HRC fuses. - -
- -
BUSBAR - -
- -
150Amp TPN aluminium busbar with coloured heat shrinkable sleeve. - -
OUTGOING - -
All the outgoing feeder shall have electronic energy meter with maximum
demand recorder facility. - -
03 Nos. 63 Amp FP RCBO - -
02 Nos. 63 Amp TPN Miniature Circuit Breaker. - -
02 Nos. 40 Amp TPN Miniature Circuit Breaker. - -
02 Nos. 40 Amp DP Miniature Circuit Breaker. - -
01 Nos. 25 Amp DP Miniature Circuit Breaker. - -
Panel described as above Set 2 115,200.00 230,400.00
- -
- -
2.0 RISING MAIN - -
Design, Manufacturing, Supply, Receiving, Unloading, Shifting, Installation,
testing and commissioning of following capacity Rising Mains consisting of total
metal enclosure, TPN high electrolytic conductivity aluminium conductor bus
bars fully covered with heat shrinkable PVC coloured sleeves, suitable for
operation on 415 V / 650 V 3 phase, 4 wire 50 cycles AC supply system. The
construction should be such that it will be dust and vermin proof to IP 42 in
2mm thickness and front cover in 1.6mm thickness CRCA powder coated sheet
construction. The Rising Mains should be built in convenient sections complete
with fire proof barriers, thrust pads, expansion joints at intervals and straps for - -
fixing on wall or floor mounted arrangement duly marked with the current
carrying capacity. The entire length should be fitted with a double run of
aluminium earth strip of suitable size. Rising Main shall be comply fully with
specification. (25KA / 35KA)

2.1 315 Amp RM 30 10,670.00 320,100.00

2.2 630 Amp RM 30 13,765.00 412,950.00
- -
3.0 END FEED UNIT - -
- -
Page 2 of 23
 Elec NSR (T-2)
Design, Manufacturing, Supply, Receiving, Unloading, Shifting, Installation,
Testing & Commissioning of following End Feed Unit housing fabricated out of
14G CRCA powder coated (as approved) sheet steel for the Rising Mains fitted
with following MCCB. The End Feed Unit should complete with solid aluminium
links of rated capacity of MCCB to Rising Mains. The End Feed Unit should be
complete with suitable size of glands plate for incoming cables. All MCCB shall - -
have Ics value of 50 KA. Each end feed unit shall have a set of 3 nos. phase LED
Type indicating lights with control fuses.

3.1 630 Amp, 4 Pole MCCB No. 2 34,950.00 69,900.00

3.2 315 Amp, 4 Pole MCCB No. - -
- -
4.0 TAP OFF UNIT - -
- -
Design, Manufacturing, Supply, Receiving, Unloading, Shifting, Installation,
Testing & Commissioning of cubical type tap off unit box fabricated out of 2.0
mm thick CRCA sheet, dust and vermin proof, with hinged detachable doors and
painted front, comprising LED type indication lamps with toggle switches and 4
pole MCCB terminated directly with tap off box with Bus Bar links on the
incoming side and suitable for cable connection on the outgoing side including
making connections, interconnections, earthing complete as required. All MCCB - -
shall have Ics value of 36 KA and Thermal Magnetc release for over current &
short circuit.

4.1 Tap Off Box with 100 Amp FP MCCB. No. 18 8,350.00 150,300.00
- -
S.H.-II MAIN & SUB MAIN CABLES - -
Supply of following sizes of 1.1KV grade multicore aluminium conductor XLPE
insulated and PVC sheathed armoured cable conforming to relevant IS. (Cable
1.0 shall be purchased only after approval of cable schedule by architect / - -
consultant)

1.1 3.5 core, 300 sq.mm. Meter - -

1.2 3.5 core, 240 sq.mm. Meter - -
1.3 3.5 core, 185 sq.mm. Meter - -
1.4 3.5 core, 120 sq.mm. Meter - -
1.5 3.5 core, 95 sq.mm. Meter - -
1.6 3.5 core, 70 sq.mm. Meter - -
1.7 3.5 core, 50 sq.mm. Meter - -
1.8 3.5 core, 35 sq.mm. Meter - -
1.9 4.0 core, 25 sq.mm. Meter - -
1.10 4.0 core, 16 sq.mm. Meter 120 170.00 20,400.00
Page 3 of 23
 Elec NSR (T-2)
1.11 4.0 core, 10 sq.mm. Meter 70 145.00 10,150.00
1.12 4.0 core, 6 sq.mm. Meter 25 125.00 3,125.00
1.13 2.0 core, 10 sq.mm. Meter - -
1.14 2.0 core, 6 sq.mm. Meter - -
- -
S.H.-III SUPPLY & FIXING OF LIGHT FIXTURES & FANS INTERNAL LIGHTING - -
- -
Supply, Installation, Testing & Commissioning of 1x28 watt T5 light fixture with
1.0 electronic ballast surface mounted complete as required. (Philips Make, Cat No- Each 0 - This item is replaced by LED
Mirolta Slim T5 TMS540 HF or equivalent.)
-
Supply, Installation, Testing & Commissioning of 1x28 watt CFL light fixture for
Kitchen surface mounted including electronic ballast etc complete as required.
2.0 (Philips Make, Cat No - V2 VECTOR 28 W TCH 207 or equivalent.) Nos 0 - This item is replaced by LED

- -
Supply, Installation, Testing & Commissioning of 1x18 watt CFL light fixture
3.0 surface mounted including electronic ballast etc complete as required. (Philips Nos -
Make, Cat No - FCG 300 or equivalent.)
- -
Supply, Installation, Testing & Commissioning of 1x18 watt CFL light fixture
surface mounted including electronic ballast etc complete as required. (Philips
4.0 Make, Cat No - FCS100 1XPL-C/2P13W I 240 or equivalent.) Nos 0 - This item is replaced by LED

-
Supply, Installation, Testing & Commissioning of 1x9 CFL lamp suitable for batten
5.0 holder. (Philips Make or equivalent.) Nos 0 - This item is replaced by LED
-
Light Fixture surface mounted Wipro make cat no- WKP14109 or equivalent.
6.0 Each 0 - This item is replaced by LED
- -
Supply, Installation, Testing & commissioning of 1x 9 W, mirror light. (Wipro
7.0 make cat. no. WRF 21118 or equivalent.) Each -
- -
Supply, Installation, Testing & commissioning of 1x23 watt bracket light. ((Philips
8.0 Make, Cat No- QWG 311 or equivalent.) Each -
- -
Supply of following sizes of heavy duty exhaust fan for single phase 230 volt,
50HZ AC supply complete with motor, blades, frame, bracket, louver/ shutter
9.0 etc as required. (HavellS Make, Cat No - Ventil Air-DX or equivalent.) - -

Page 4 of 23
 Elec NSR (T-2)
9.1 250 mm Exhaust Fan (1500 RPM). Nos 424 1,375.00 583,000.00
- -
Supply of following sizes of ceiling fan complete with double ball bearing,
motor, blades, downrod, canopy, capacitor etc. suitable for operation on 230
10.0 volt, 50 Hz, A.C. supply complete as required. (Havells Make, Cat No-ES-50 - -
Premium 5 or equivalent.)

10.1 1200 mm. Nos 560 2,050.00 1,148,000.00

- -
Supply, Installation, Testing & Commissioning of 4x14 watt CFL light fixture
recess mounted including Electronic High efficiency ballast etc complete as
11.0 required. (Philips Make, Cat No - TBS088 4XTL5-14W EBP M2 or equivalent.) Nos -

- -
Supply, Installation, Testing & Commissioning of 2x18 watt CFL light fixture
recess mounted including Electronic High efficiency ballast etc complete as
12.0 required. (Philips Make, Cat No - FBS075 2XPL-C/2P18W I 240V or equivalent.) Nos -

- -
Supply, Installation, Testing & Commissioning of 1x18 watt CFL light fixture
recess mounted including Electronic High efficiency ballast etc complete as
13.0 required. (Philips Make, Cat No - FBS075 1XPL-C/2P18W I 240V or equivalent.) Nos -

- -
S.H.-IV TELEPHONE - -
- -
Supply and fixing of telephone distribution board (tag blocks) in hinged type MS
box duly powder coated complete with bakelite sheet with termination of
1.0 incoming and outgoing telephone wire etc. complete as required. - -

1.1 10 pair telephone distribution board. Nos 0 - -

1.2 20 pair telephone distribution board. Nos 16 2,375.00 38,000.00
1.3 100 pair telephone distribution board. Nos 2 - -
1.4 200 pair telephone distribution board. Nos 0 - -
1.5 500 pair telephone distribution board. Nos 0 - -
- -
Supply and wiring of telephone unarmoured cable with 0.61mm dia annealed
tinned copper conductor PVC insulated and PVC sheathed unarmoured
2.0 telephone cable in existing conduit in concealed/ surface system / existing cable - -
tray complete as required.

2.1 05 pair telephone unarmoured cable. Meter 70 86.00 6,020.00

2.2 10 pair telephone unarmoured cable. Meter 320 102.00 32,640.00
Page 5 of 23
 Elec NSR (T-2)
2.3 20 pair telephone unarmoured cable. Meter 0 - -
2.4 50 pair telephone unarmoured cable. Meter 0 - -
2.5 100 pair telephone unarmoured cable. Meter 0 - -
- -
Supply, erection, testing and commissioning of following sizes of splitter of
3.0 aluminium die cast body in suitable size of G.I. Box. - -
3.1 2 way No. - -
3.2 6 way No. - -
3.2 10 way No. 18 1,650.00 29,700.00
- -
V FIRE ALARM SYSTEM- - -
Supply, Installation,Testing & Commisioning of Microprocessor based X loop fire
alarm control panel expandable upto 2 loops fully networkable with each loop
capable of taking 125 devices, 8 line x 40 character alpha-numeric liquid crystal
display .The panel shall be soft addressable type . The panel shall be able to give
pin point location of all fire/fault conditions. Further, the panel must be able to
automatically switch off respective control switches when ever any alarm is
triggered. The panel shall have in built rectifier, Loop cards,provision for externel
& internal printer(if required), L C D unit to indicate Fire/Fault Signal with
address and analog output, built in printer to log all fire or fault events complete
1.0 in all respects, integral SMF lead acid batteries with sealed cells of 24 V capable - -
of running for a minimum of 8 hours with integral battery charger complete as
required and as per specification. The fire alarm panel shall be suitable for
software integration with BMS & PA system.

1.1 1 Loops Set 2 220,350.00 440,700.00

1.2 1 Loops Set - -
- -
Supply, Installation,Testing & Commisioning of Analog Addressable Intelligent
multisensor detector with two inbuilt optical smoke sensors with light angles as
well as additional heat detector sensor with decentralise intelligence, soft
2.0 addressable Photothermal type with inbuilt fault isolator as per NFPA style 7 Nos. 2 16,950.00 33,900.00
wiring complete with base as required.

- -
Supply Installation, Testing & Commissioning of Intelligent addressable Manual
3.0 Call Point / Pull station complete as per specification. Nos. 18 4,450.00 80,100.00
- -
Supply, installation, testing and commissioning of addressable control module
4.0 complete as per specification. Nos. 4 4,275.00 17,100.00

Page 6 of 23
 Elec NSR (T-2)
- -
Supply, installation, testing and commissioning of addressable monitor module
5.0 complete as per specification. Nos. - -
- -
Supply Installation, Testing & Commissioning of wall mounting loop powered
6.0 addressable type hooter with all accessories. Nos. 18 6,950.00 125,100.00

Page 7 of 23
 Elec NSR (T-2)
- -
Supply Installation, Testing & Commissioning of Response Indicator single LED /
7.0 2 LED. Nos. - -
- -
VI LIFT SYSTEM- -
- -
1.0 PASSENGER LIFT- - -
Design, manufacturing, testing at works, supply and delivery, receiving,
unloading, storing, inspection, handling, assembling, installing in correct
assigned position, effecting proper connections, testing and commissioning of
following capacity passenger-lifts, having speed of 1.5 MPS 9 stops and 9
openings and total travel of 27.00 meters approx. with VVVF drive, full
collective duplex control on 415 V, 50 cycles, 3 phase power complete in - -
accordance with specifications and drawings as required with Car, Car Door &
Hoistway Door in stainless steel hairline finish, inclusive of built in ARD and as
per specification.

1.1 8 Passenger Lift Set 2 - -

- -
2.0 PASSENGER LIFT- - -
Design, manufacturing, testing at works, supply and delivery, receiving,
unloading, storing, inspection, handling, assembling, installing in correct
assigned position, effecting proper connections, testing and commissioning of
following capacity passenger-lifts, having speed of 1.5 MPS 8 stops and 8
openings and total travel of 24.00 meters approx. with VVVF drive, full
collective duplex control on 415 V, 50 cycles, 3 phase power complete in - -
accordance with specifications and drawings as required with Car, Car Door &
Hoistway Door in stainless steel hairline finish, inclusive of built in ARD and as
per specification.

2.1 8 Passenger Lift Set 0 - -

- -
3.0 GOODS LIFT- - -

Page 8 of 23
 Elec NSR (T-2)
Design, manufacturing, testing at works, supply and delivery, receiving,
unloading, storing, inspection, handling, assembling, installing in correct
assigned position, effecting proper connections, testing and commissioning of
following capacity passenger-lifts, having speed of 1.0 MPS 9 stops and 9
openings and total travel of 27.00 meters approx. with VVVF drive, full
collective duplex control on 415 V, 50 cycles, 3 phase power complete in - -
accordance with specifications and drawings as required with Car, Car Door &
Hoistway Door in stainless steel hairline finish, inclusive of built in ARD and as
per specification.

3.1 2000 Kg. Set 2 - -

- -
4.0 GOODS LIFT- - -
Design, manufacturing, testing at works, supply and delivery, receiving,
unloading, storing, inspection, handling, assembling, installing in correct
assigned position, effecting proper connections, testing and commissioning of
following capacity passenger-lifts, having speed of 1.0 MPS 8 stops and 8
openings and total travel of 24.00 meters approx. with VVVF drive, full
collective duplex control on 415 V, 50 cycles, 3 phase power complete in - -
accordance with specifications and drawings as required with Car, Car Door &
Hoistway Door in stainless steel hairline finish, inclusive of built in ARD and as
per specification.

4.1 2000 Kg. Set 0 - -

TOTAL NSR EXCLUDING GST 4,845,985.00

Page 9 of 23
 SUBSTITUTED ITEM
Electrical works (NSR)
Sl Item No Description in CFL Unit Quantity Descripton in LED Rate Amount Remarks
S.H.-III SUPPLY & FIXING OF LIGHT FIXTURES & FANS INTERNAL LIGHTING

Supply, Installation, Testing & Commissioning of 1x28 watt T5 light fixture with
NSR 1.0 electronic ballast surface mounted complete as required. (Philips Make, Cat No- Mirolta Each 584 Smart Bright BN 021C LED 20S CDL (Make - Philips) 433.00 252,872.00
Slim T5 TMS540 HF or equivalent.)
- -
Supply, Installation, Testing & Commissioning of 1x28 watt CFL light fixture for Kitchen
NSR 2.0 surface mounted including electronic ballast etc complete as required. (Philips Make, Nos 700 Smart Bright BN 021C LED 20S CDL (Make - Philips) 433.00 303,100.00
Cat No - V2 VECTOR 28 W TCH 207 or equivalent.)
- -
Supply, Installation, Testing & Commissioning of 1x18 watt CFL light fixture surface
NSR 3.0 mounted including electronic ballast etc complete as required. (Philips Make, Cat No - Nos 20 Sleek Surface SM 251C LED 12S 6500 PSU WH (Make - Philips) 1,095.00 21,900.00
FCG 300 or equivalent.)
- -
Supply, Installation, Testing & Commissioning of 1x18 watt CFL light fixture surface
NSR 4.0 mounted including electronic ballast etc complete as required. (Philips Make, Cat No - Nos 264 Sleek Surface SM 251C LED 7S 6500 PSU WH (Make - Philips) 963.00 254,232.00
FCS100 1XPL-C/2P13W I 240 or equivalent.)
- -
Supply, Installation, Testing & Commissioning of 1x9 CFL lamp suitable for batten
NSR 5.0 holder. (Philips Make or equivalent.) Nos 284 LED BULB 9watt Suitable For Battern Holder (Make - Philips) 103.00 29,252.00
As per central Government instruction
- - and National LED Programme, in all gov.
NSR 6.0 Light Fixture surface mounted Wipro make cat no- WKP14109 or equivalent. Each 44 Bulk Head WT 140 LED 7S 6500 (Make - Philips) 925.00 40,700.00 building LED Light to be installed
- - instead of CFL.
Supply, Installation, Testing & commissioning of 1x 9 W, mirror light. (Wipro make cat.
NSR 7.0 no. WRF 21118 or equivalent.) Each 140 Smart Bright BN 021C LED 12S CDL (Make - Philips) 445.00 62,300.00
- -
Supply, Installation, Testing & commissioning of 1x23 watt bracket light. ((Philips Make,
NSR 8.0 Cat No- QWG 311 or equivalent.) Each EWP 300 Wall Bracket (Make - Philips) 2,485.00 -
- -
Supply, Installation, Testing & Commissioning of 4x14 watt CFL light fixture recess
NSR 11.0 mounted including Electronic High efficiency ballast etc complete as required. (Philips each Full Glow RC 380B G4 LED 36S 6500 PSU OD (Make - Philips) 3,168.00 -
Make, Cat No - TBS088 4XTL5-14W EBP M2 or equivalent.)
- -
Supply, Installation, Testing & Commissioning of 2x18 watt CFL light fixture recess
NSR 12.0 mounted including Electronic High efficiency ballast etc complete as required. (Philips each Dura Slim (Ultra) 15watt Round (Make - Philips) 1,169.00 -
Make, Cat No - FBS075 2XPL-C/2P18W I 240V or equivalent.)
- -
Supply, Installation, Testing & Commissioning of 1x18 watt CFL light fixture recess
NSR 13.0 mounted including Electronic High efficiency ballast etc complete as required. (Philips each Dura Slim (Ultra) 12watt Round (Make - Philips) 1,038.00 -
Make, Cat No - FBS075 1XPL-C/2P18W I 240V or equivalent.)

TOTAL OF LIGHT FIXTURES & FANS EXCLUDING GST 964,356.00

 Terms & Conditions :
1 GST and other tax/levied will be extra.
2 All the materials are as per Standards and Specifications.
A] Wire & Cable : Polycab/KEI
B] Moduler Accessories: Anchor Roma
C] Distribution : Havells
D] Conduit: Polycab/AKG
3 We will mobilize the site on receipt of your technically and commercially clear order
4 Mobilization period required 15 days from the date of receipt of your firm order
5 One Store cum Office is to be provided by you on free of cost
6 Required Electricity and Water is to be provided by you on free of cost
We will execute the job as per the specfication and drawing. Drawings are to be provided alongwith
7 the Order for our study
Any additional or extra work, if attended to be noted immediately for settelement of
8 rates and all

We will not be responsible for any kind of Local Strike, Local Issues any Infiltration of Outsiders,
natural calamities or act of God, which is beyond our control and the said period will not be
9 calculated in completion period of work
10 Labour hutment to be provided by you on free of cost
Payment :
A] Payment : Supply Part
a) 5% advance along with the order
b) 70% on receipt of the delivery at site
c) 20% against installation of the same
d) 05% against final hand over of the site

B] Payment : Installation Part

a) 5% advance along with the order
b) 80% against R.A. Bill
c) 10% against handing over of the site
d) 05% after defect liability period of 6 months

C] Payment : Panel Part

a) 30% advance along with the order
b) Balance after Inspection and before dispatch
c) Panel Transportation cost will be extra
d) Transit insurance will be in your account
e) You have to provide the e way bill for transportation of materilas from Kolkata to site.
Conditions :
other tax/levied will be extra.
aterials are as per Standards and Specifications.
able : Polycab/KEI
Accessories: Anchor Roma
on : Havells
Polycab/AKG
obilize the site on receipt of your technically and commercially clear order
on period required 15 days from the date of receipt of your firm order
cum Office is to be provided by you on free of cost
Electricity and Water is to be provided by you on free of cost
xecute the job as per the specfication and drawing. Drawings are to be provided alongwith
for our study
tional or extra work, if attended to be noted immediately for settelement of
all

ot be responsible for any kind of Local Strike, Local Issues any Infiltration of Outsiders,
lamities or act of God, which is beyond our control and the said period will not be
d in completion period of work
utment to be provided by you on free of cost

: Supply Part
vance along with the order
n receipt of the delivery at site
ainst installation of the same
gainst final hand over of the site

: Installation Part
vance along with the order
gainst R.A. Bill
ainst handing over of the site
fter defect liability period of 6 months

: Panel Part
vance along with the order
e after Inspection and before dispatch
ransportation cost will be extra
insurance will be in your account
ve to provide the e way bill for transportation of materilas from Kolkata to site.