Scribd
Upload
135 views

Saudi Aramco Test Report

This document is a calibration test report for a pressure test relief valve. It provides details of the valve such as the manufacturer, serial number, size and type. It documents the calibration tests performed, including bellow leak test and seat leak test pressures. Notes provide cautions for handling and inspecting the valve. The report records the general condition assessment and acceptance of the valve. It lists reference documents for pressure testing standards and procedures. Sign-offs are included to verify the work.

Uploaded by

Jagdish
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
135 views

Saudi Aramco Test Report

This document is a calibration test report for a pressure test relief valve. It provides details of the valve such as the manufacturer, serial number, size and type. It documents the calibration tests performed, including bellow leak test and seat leak test pressures. Notes provide cautions for handling and inspecting the valve. The report records the general condition assessment and acceptance of the valve. It lists reference documents for pressure testing standards and procedures. Sign-offs are included to verify the work.

Uploaded by

Jagdish
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 8

SAUDI ARAMCO ID/PIEU-30-Oct-2017- REV. 2017.06.00 (Standards Cutoff -June 30, 2017) Rev. 2017.06.

00 30-Jun-17
SATR NUMBER DATE APPROVED DISCIPLINE
SAUDI ARAMCO TEST REPORT
Calibration Test Report - Pressure Test Relief Valve SATR-A-2006 30-Oct-17 Mechanical
PROJECT TITLE WBS/BI/JO NUMBER CONTRACTOR/SUBCONTRACTOR

EQUIPMENT ID NUMBER EQUIPMENT DESCRIPTION EQPT CODE SYSTEM P.O. NUMBER

LAYOUT DRAWING NUMBER REV. NO. S/U SYSTEM FACILITY

TASK COMPLETED DATE RFI No. REQUESTED INSPECTION


DATE

Calibration of "TEST" Relief Valve (See Notes & Cautions Below)


Certificate No. Date of Calibration:

Valve Manufacture: Valve Size:

Valve Serial Number: Valve Type:

Test Medium: RV No. / Tag No.:

Bonnet Leak Test:

Bellow Leak Test: Seat Leak Test Pressure:


Note 1: Tested RVs have tags legibly stamped "TEST", with set pressure, & cal / cal due dates.
Note 2: M&TE logs for control of measurement & test equipment (reports/results) are maintained
for project duration.

Details of Pressure Gauge Used for Calibration (Shop Test Bench or Test Rig as applicable)
1 Serial No / Certificate No:

2 Make (Model):

3 Date Calibrated/Recalibration due date:

4 Other Details:

Caution 1:Exercise CARE IN HANDLING RV's at all times appropriate for such a delicate mechanism. Do not drop or jar, avoid stressing the RV
body and parts, protect flanges and nozzles. Store/transport RVs in a vertical position, & thoroughly secure during transport. Cover flanges,
threads & nozzles with tape or special plastic plugs to protect the RVs from dirt and mechanical damage during storage and transport . Forward
handling (safety) concerns to Project Quality Control Mgr. for action.
Caution 2:General condition of TEST relief valves is closely monitored due to frequent handling & testing/adjustment. Wear and
corrosion of parts shall require service attention by qualified trained technicians. To assure safety for test crews & personnel on projects, give
special attention during visual examination to inlet/outlet nozzle conditions (corrosion, damage), caps, stems, adjusting screws and bolting. Reject
any relief valve found to be visually unacceptable and require repair/replacement as needed.

General Condition of Test Relief Valve (Complete this Section): Accept/Reject (Use remarks section as needed)
1. Handling Practices During Testing & Calibration (Caution # 1): ACCEPT REJECT

2. Visual Examination for Corrosion/Wear/Missing Parts (Caution # 2): ACCEPT REJECT


Remarks:

REFERENCE DOCUMENTS:
1. SA General Instruction Manual, GI-002.102, Pressure Testing Safely, (28 October 2008)
2. SAES-A-004 - General Requirements of Pressure Testing (28 August 2016)
3. SAEP-319, Pressure Relief Valves - Routine Test, Inspection, Quality Assurance & Regulation (2 February 2008)

Contractor / Third-Party Saudi Aramco


Construction Representative* PMT Representative
Work is Complete and Ready for Inspection: Name, Initials and T&I Witnessed QC Record Reviewed Work Verified
Name, Initials and Date:
Date:

QC Inspector PID Representative


Performed Inspection Work / Rework May Proceed T&I Witnessed QC Record Reviewed Work Verified
Name, Initials and
Name, Initials and Date:
Date:

QC Supervisor Proponent and Others


Quality Record Approved: T&I Witnessed QC Record Reviewed Work Verified
Name, Organization,
Name, Sign and Date:
Initials and Date:

Saudi Aramco: Company General Use


SATR NUMBER DATE APPROVED DISCIPLINE
SAUDI ARAMCO TEST REPORT
Calibration Test Report - Pressure Test Relief Valve SATR-A-2006 30-Oct-17 Mechanical
PROJECT TITLE WBS/BI/JO NUMBER CONTRACTOR/SUBCONTRACTOR

EQUIPMENT ID NUMBER EQUIPMENT DESCRIPTION EQPT CODE SYSTEM P.O. NUMBER

LAYOUT DRAWING NUMBER REV. NO. S/U SYSTEM FACILITY

TASK COMPLETED DATE RFI No. REQUESTED INSPECTION


DATE

Calibration of "TEST"
Quality Record Approved: Relief Valve (See Notes & Cautions Below)
Name, Organization,
Name, Sign and Date:
Initials and Date:

*Person Responsible for Completion of Quality Work / Test Y = YES N = NO F = FAILED

Saudi Aramco: Company General Use


SAUDI ARAMCO ID/PIEU-30-Oct-2017- REV. 2017.06.00 (Standards Cutoff -June 30, 2017)

Saudi Aramco: Company General Use


Rev. 2017.06.00

30-Oct-17

Saudi Aramco: Company General Use


30-Jun-17

Saudi Aramco: Company General Use


SAUDI ARAMCO ID/PIEU-30-Oct-2017- REV. 2017.06.00 (Standards Cutoff -June 30, 2017)

Saudi Aramco: Company General Use


Rev. 2017.06.00

30-Oct-17

Saudi Aramco: Company General Use


30-Jun-17

Saudi Aramco: Company General Use

You might also like