PACKAGING SPECIFICATION DATA SHEET (FORM 150NA)

PART INFORMATION (Digital Photo or Sketch) INTERIOR DESIGN DIGITAL PHOTO (or Sketch) PROGRAM: REVISION NO.
S197 8.8 Condor
PLANT(s): DIMENSIONS
Ford Axel Plants (INCH) TARE
QTY CNTR NAME MATERIALS L W H WT
66 48ZC2327 Tray Plastic
22.5 16 1.38 1.72
1 SP16 Skid Plastic
48.5 45.75 5 63
1 SL5 Top Plastic
48 45 3 18

DIMENSIONS (IN) WEIGHT PER

L W H PIECE (LB)
3.98 3.3 2.72
CONTAINER PHOTO (or Sketch)

RUST PREVENTATIVE. METHOD FORD CNTR PCS / WEIGHT/CONTAINER

(IF APPLIED) CNTR I.D. WEIGHT CNTR PART GROSS
✘ Oiling PRIMARY
Silica-Gel (Desiccant) CONTAINER 1.72 9 2.72 25.4
VCI UNIT
Others LOAD 1320 594 1758.2 2005.0
FORD PART NUMBERS: FORD PART NUMBERS: UNIT LOAD HEIGHT:
# Prefix Base Suffix # Prefix Base Suffix CONTAINER LABEL PHOTO (or Sketch):
1.) 6L3W- 4236 BA 6.) Same as 8C3W-4236-BA and BB Locker gear, and 8C3W4236-AA Side
2.) 7.) gear approved 4/06/09
3.) 8.)
CONTAINER TYPE 4.) 9.)
✘ FORD STANDARD Returnable Container 5.) 10.)
✘ UNIQUE Returnable Container PART NAME: FORD USE ONLY
EXPENDABLE Container 9x13 (8.8 Condor) Locker CONCEPT PKG APPROVAL FINAL PKG APPROVAL
SUPPLIER NAME: MATERIAL FLOW ENGINEERING PLANT
Musashi South Carolina APPROVED / NOT APPROVED WITH THE FOLLOWING
FORD SUPPLIER CODE: Approved as is ✘ Approved as is REQUESTED CHANGES & COMMENTS:
CB7FA
SUPPLIER ADDRESS: Approved with changes Approved with changes
Musashi South carolina
One Musashi Drive Not Approved Not Approved
Bennettsville, SC 29512
PHONE: 843-479-9953, Ext. 174
MOBILE
FAX: 843-479-9954 SIGNATURE: SIGNATURE:
CONTACT: Sheila McRae
TITLE: Production Control Planner Jeff Nielson
CONTAINERS PER PALLET EMAIL: [email protected] DATE: DATE:
MIN: 11 MAX: 11 DATE: 3/27/2009 4/6/2009
REMARK 1: REMEMBER, THE RESPONSIBILITY FOR ENSURING COMPONENT QUALITY FROM YOUR PLANT TO THE POINT OF USE REMAINS WITH YOU - THE SUPPLIER OF THE PRODUCT.
REMARK 2: ALL NEW CONTAINERS MUST BE LABELED ACCORDING TO CURRENT FORD PACKAGING GUIDELINES!
REMARK 3: Latest level Form 150 NA is found at covisint.com

Note: 2005 changes are in Italics Page 1 of 17 Date Issued: April 2001.
Date Revised: April 1, 2005.
 PACKAGING SPECIFICATION DATA SHEET (FORM 150NA)

PART INFORMATION (Digital Photo or Sketch) INTERIOR DESIGN DIGITAL PHOTO (or Sketch) PROGRAM: REVISION NO.
10.5
PLANT(s): DIMENSIONS
Ford Axel Plants (INCH) TARE
QTY CNTR NAME MATERIALS L W H WT
66 48ZC2327 Tray Plastic
22.5 16 1.38 1.72
1 SP16 Skid Plastic
48.5 45.75 5 63
1 SL5 Top Plastic
48 45 3 18

DIMENSIONS (IN) WEIGHT PER

L W H PIECE (LB)
3.98 3.3 2.72
CONTAINER PHOTO (or Sketch)

RUST PREVENTATIVE. METHOD FORD CNTR PCS / WEIGHT/CONTAINER

(IF APPLIED) CNTR I.D. WEIGHT CNTR PART GROSS
✘ Oiling PRIMARY
Silica-Gel (Desiccant) CONTAINER 1.72 9 2.72 25.4
VCI UNIT EXCEEDS WEIGHT LIMIT
Others LOAD 1983 594 1758.2 4071.8
FORD PART NUMBERS: FORD PART NUMBERS: UNIT LOAD HEIGHT:
# Prefix Base Suffix # Prefix Base Suffix CONTAINER LABEL PHOTO (or Sketch):
1.) 8C3W- 4236 DA 6.) Same as 8C3W-4236-BA and BB Locker gear, and 8C3W4236-AA Side
2.) 8C3W- 4236 CA 7.) gear approved 8/17/06
3.) 8.)
CONTAINER TYPE 4.) 9.)
✘ FORD STANDARD Returnable Container 5.) 10.)
✘ UNIQUE Returnable Container PART NAME: FORD USE ONLY
EXPENDABLE Container 10.5 Locker & Side Gear CONCEPT PKG APPROVAL FINAL PKG APPROVAL
SUPPLIER NAME: MATERIAL FLOW ENGINEERING PLANT
Musashi South Carolina APPROVED / NOT APPROVED WITH THE FOLLOWING
FORD SUPPLIER CODE: Approved as is ✘ Approved as is REQUESTED CHANGES & COMMENTS:
CB7FA
SUPPLIER ADDRESS: Approved with changes Approved with changes
Musashi South carolina
One Musashi Drive Not Approved Not Approved
Bennettsville, SC 29512
PHONE: 843-479-9953, Ext. 174
MOBILE
FAX: 843-479-9954 SIGNATURE: SIGNATURE:
CONTACT: Sheila McRae
TITLE: Production Control Planner Jeff Nielson
CONTAINERS PER PALLET EMAIL: [email protected] DATE: DATE:
MIN: 11 MAX: 11 DATE: 3/27/2009 4/6/2009
REMARK 1: REMEMBER, THE RESPONSIBILITY FOR ENSURING COMPONENT QUALITY FROM YOUR PLANT TO THE POINT OF USE REMAINS WITH YOU - THE SUPPLIER OF THE PRODUCT.
REMARK 2: ALL NEW CONTAINERS MUST BE LABELED ACCORDING TO CURRENT FORD PACKAGING GUIDELINES!
REMARK 3: Latest level Form 150 NA is found at covisint.com

Note: 2005 changes are in Italics Page 2 of 17 Date Issued: April 2001.
Date Revised: April 1, 2005.
 PACKAGING SPECIFICATION DATA SHEET (FORM 150NA)

PART INFORMATION (Digital Photo or Sketch) INTERIOR DESIGN DIGITAL PHOTO (or Sketch) PROGRAM: REVISION NO.
10.5
PLANT(s): DIMENSIONS
Ford Axel Plants (INCH) TARE
QTY CNTR NAME MATERIALS L W H WT
90 48ZC2327 Tray Plastic
22.5 16 1.38 1.72
1 SP16 Skid Plastic
48 45 5 67
1 SL5 Top Plastic
48 45 3 18

DIMENSIONS (IN) WEIGHT PER

L W H PIECE (LB)
2.99 1.09 0.95
CONTAINER PHOTO (or Sketch)

RUST PREVENTATIVE. METHOD FORD CNTR PCS / WEIGHT/CONTAINER

(IF APPLIED) CNTR I.D. WEIGHT CNTR PART GROSS
✘ Oiling PRIMARY
Silica-Gel (Desiccant) CONTAINER 1.72 20 0.95 19.8
VCI UNIT EXCEEDS WEIGHT LIMIT
Others LOAD 2020 1800 1710.0 4066.6
FORD PART NUMBERS: FORD PART NUMBERS: UNIT LOAD HEIGHT:
# Prefix Base Suffix # Prefix Base Suffix CONTAINER LABEL PHOTO (or Sketch):
1.) 8C3W- 4215 FA 6.) Same as 8C3W-4215-AA Pinion gear approved 8/17/06
2.) 7.)
3.) 8.)
CONTAINER TYPE 4.) 9.)
✘ FORD STANDARD Returnable Container 5.) 10.)
✘ UNIQUE Returnable Container PART NAME: FORD USE ONLY
EXPENDABLE Container 10.5 Pinion Gear CONCEPT PKG APPROVAL FINAL PKG APPROVAL
SUPPLIER NAME: MATERIAL FLOW ENGINEERING PLANT
Musashi South Carolina APPROVED / NOT APPROVED WITH THE FOLLOWING
FORD SUPPLIER CODE: Approved as is ✘ Approved as is REQUESTED CHANGES & COMMENTS:
CB7FA
SUPPLIER ADDRESS: Approved with changes Approved with changes
Musashi South carolina
One Musashi Drive Not Approved Not Approved
Bennettsville, SC 29512
PHONE: 843-479-9953, Ext. 174
MOBILE
FAX: 843-479-9954 SIGNATURE: SIGNATURE:
CONTACT: Sheila McRae Jeff Nielson
TITLE: Production Control Planner
CONTAINERS PER PALLET EMAIL: [email protected] DATE: DATE:
MIN: 15 MAX: 15 DATE: 3/27/2009 4/6/2009
REMARK 1: REMEMBER, THE RESPONSIBILITY FOR ENSURING COMPONENT QUALITY FROM YOUR PLANT TO THE POINT OF USE REMAINS WITH YOU - THE SUPPLIER OF THE PRODUCT.
REMARK 2: ALL NEW CONTAINERS MUST BE LABELED ACCORDING TO CURRENT FORD PACKAGING GUIDELINES!
REMARK 3: Latest level Form 150 NA is found at covisint.com

Note: 2005 changes are in Italics Page 3 of 17 Date Issued: April 2001.
Date Revised: April 1, 2005.
 HOW TO FILL OUT FORD FORM 150NA
OVERVIEW : FORM150NA
The FORM150NA is required for all parts that will be shipped to Ford Motor company plants.
FORM150NA takes the place of the Ford NA1121E.
Completed form must include ALL of the requested (part info, photos, bill of material, supplier info, etc)
See FORM150NA, 'EXAMPLE' tab included in this file
Look for Notes in FORM150NA EXAMPLE (Small red box in top right hand corner) attached to certain cells
Fill in all fields that are shaded Green, (Form will automatically fill in dim/tare for Ford standard containers)
Use on FORD NON STANDARD CONTAINERS requires pre-approval from Ford Material Flow Engineering.

SUBMITTING FORM150NA
E-mailing files with digital photos is the preferred means of receiving FORM150NA's in order to preserve legibility
E-mail files to [your Ford Packaging contact]
If E-mail is not available, standard mail is preferred [insert your Ford Packaging Contact]
Faxing is not recommended due to loss of legibility
Submitted forms to be approved by Ford

DIGITAL PHOTOS OR SKETCHES

MUST be included for PART, EXTERIOR DESIGN, SHIPPING UNIT, and INTERIOR UNIT
Digital photos as seen in the enclosed example are preferred.
If digital photo technology is not available, a drawing or sketch must be included on the form

PART INFORMATION
LENGTH (L), WIDTH (W), and HEIGHT (H) must be stated in Inches (in) [1KG = 2.2LB 25.4MM = 1IN]
WEIGHT PER PIECE must be stated in pounds (lbs) [1LB = 0.454KG 1MM = 0.039IN]

CONTAINER TYPE
Check the box that applies.
(If a Ford standard returnable container is NOT selected, pre-approval from Ford MFE is required)

SHIPPING UNIT INFORMATION

Containers Per Pallet - Identify minimum layer quantity and maximum layer quantity of containers.

BILL OF MATERIAL
Details all components used to package a given part
QTY: Number of each component per Pack
CNTR: Ford Container ID
NAME: Container type, Dunnage Description
MATERIALS: Packaging Material
DIMENSIONS: Container or packaging dimensions in inches (filled in automatically for Ford standard Containers)
TARE: Weight of Container or Packaging Component in lbs. (filled in automatically for Ford standard Containers)
RUST PREVENTION: check the box that applies if applicable

PART NUMBER, SUPPLIER INFORMATION

Be sure to include the complete Ford part number
Complete all sections of Supplier Information

PACKAGING APPROVALS
Packaging Concept Approval by Ford MFE will be provided to supplier for initial part shipment for plant review.
Upon receiving FORM 150NA Concept Approval, the supplier is required to ship initial part requirements in approved pack.
Send notice to Ford MFE and plant with specifics on shipment (date, carrier, etc)
Plant will review part/pack, approve as is, approve with changes or Reject pack (with recommendations for new pack).
Upon Plant Approval of pack, FORM 150NA will be sent to supplier as confirmation of approved packaging.
The Formal approval to purchase and/or ship will also be sent to supplier (with agreed upon container fleet size).
Failure to implement the approved packaging will prevent PSW / APQP certification.
 New Model Data Collection Process Flowchart
A new tooled
part is sourced to
a supplier.

Supplier obtains
Form 150 from
FSN.

Supplier chooses
pack type based
on Packaging
Guidelines on
FSN.

Supplier
Is Export completes and
Packaging submits Form
Required? YES 150 to Ford MFE
contact.

NO

Supplier
completes and
submits Form
150-NA to Ford
MFE contact.

Ford MFE
approved Select
pack NO alternate
concept? container.

YES

Ford MFE
sends concept
approval to
supplier.

Supplier uses
approved pack
to ship all
remaining pre-
build
requirements.

Ford
MFE/Plant
review pack
proposal

Ford MFE sends request

plant(s) to select alternate
approved NO
pack?
container.

YES

Ford MFE
issues
procurement
authorization
letter to
supplier.

Supplier
procures
approved
containers.

Supplier
implements
approved
containers.

\583697011.xls\Flowchart Page 5 of 17 Date Issued: April 2001.

Date Revised: June 10, 2002.
 NEW MODEL PACKAGING DATA COLLECTION PROCESS
TIMELINE

SC PA CP CC 1PP J1

MBJ1 36 30 14.5 8 4-6 0

MFE Request Form 150NA's Continue as parts are added to program

Receive/Review Form 150NA's Revise as required

MFE Approves Form 150NA Approve revisions as req

Review

Supplier ships approved

pkg for pre-build requirements

Plant Packaging Review

Authorize Suppliers to Procure Cntrs

Implement

Feed and Update PFEP

Date Issued: April 2001.

\583697011.xls\Timeline Page 6 of 17
Date Revised: June 10, 2002.
 FORD
APPROVED STANDARD RETURNABLE CONTAINERS
Pallet Lid
Ford Exterior Dim. Tare Containers Pallet Exterior Dim. Tare Tare
Container (in) Wgt per I.D. (in) Wgt I.D. Dim (in) Wgt
Number L W H (lb) Layer L W H (lb) H (lb)
STANDARD TOTE PACKAGING
TOTES PALLET LID
Powertrain Operations
ST3 12 7.5 5 1.3 24 SP14 / SP16 45 48 5 67 SL5 / SL10 3 18
ST21 12 15 5 2.1 12 SP14 / SP16 45 48 5 67 SL5 / SL10 3 18
ST28 12 15 9.5 3.3 12 SP14 / SP16 45 48 5 67 SL5 / SL10 3 18

Vehicle Operations
ST26 12 15 7.5 2.8 6 SP14 / SP16 45 48 5 67 SL5 / SL10 3 18
ST39 24 15 7.5 4.8 6 SP14 / SP16 45 48 5 67 SL5 / SL10 3 18
ST40 24 15 10.9 5.8 6 SP14 / SP16 45 48 5 67 SL5 / SL10 3 18
ST41 24 15 14.5 8.1 3 SP14 / SP16 45 48 5 67 SL5 / SL10 3 18
ST78 48 15 7.5 8.1 3 SP14 / SP16 45 48 5 67 SL5 / SL10 3 18
ST80 48 15 10.9 9.9 3 SP14 / SP16 45 48 5 67 SL5 / SL10 3 18
ST87 24 22 7.5 5.7 4 SP14 / SP16 45 48 5 67 SL5 / SL10 3 18
ST95 24 22 10.9 6.4 4 SP14 / SP16 45 48 5 67 SL5 / SL10 3 18
ST96 24 22 14.5 7.3 4 SP14 / SP16 45 48 5 67 SL5 / SL10 3 18
STANDARD PALLET BOXES
SB1 32 30 25 71.0 (Only approved pallet box for Powertrain Operations)
SB31 48 45 25 96.0
SB43 48 45 34 12.0
SB89 64 48 25 190.0
SB91 64 48 34 230.0
AIAG Fastener Packaging System
AIAG0003 14 7.8 6.7 2.0 8 AIAG011 32 30 6.8 34.5 AIAG012 5 12
Note: Pallets equipped with a minimum of (2) seatbelts
Contico style containers only. Buckhorn line of pallet boxes are not acceptable.
 PACKAGING SPECIFICATION DATA SHEET (FORM 150NA)
EXAMPLE
PART INFORMATION (Digital Photo or Sketch) INTERIOR DESIGN DIGITAL PHOTO (or Sketch) PROGRAM: REVISION NO.
2003 FN145
PLANT(s):
Wixom, ST. Thomas DIMENSIONS TARE
QTY CNTR NAME MATERIALS L W H WT
1 ST58 TOTE PLASTIC 24 15 14.5 7.3
NON STANDARD CONTAINER
1 PARTITION PAPER BOARD
CELL DIVIDER ASSY
1 SP14 PALLET STRUCTURAL FOAM 48 45 5 67

1 SL9 LID VACUUM FORMED 48 45 2 18

NON STANDARD CONTAINER
DIMENSIONS (IN) WEIGHT PER
L W H PIECE (LB)
11 4.5 3 1.2
CONTAINER PHOTO (or Sketch)

GROSS WEIGHT / INDIVIDUAL CONT

MUST NOT EXCEED 15kg (35lb)

RUST PREVENTATIVE METHOD FORD CNTR PCS / WEIGHT / CONTAINER

IF A FORD STANDARD RETURNABLE CONTAINER IS NOT SELECTED, (IF APPLIED) CNTR I.D. WEIGHT CNTR PART GROSS
PRE-APPROVAL MUST BE RECEIVED FROM FORD MFE Oiling PRIMARY EXCEEDS WEIGHT LIMIT
Silica-Gel (Desiccant) CONTAINER 7.3 24 1.2 36.1
VCI UNIT
Others LOAD 172.6 288 345.6 605.8
FORD PART NUMBERS: FORD PART NUMBERS: UNIT LOAD HEIGHT:
# Prefix Base Suffix # Prefix Base Suffix CONTAINER LABEL PHOTO (or Sketch):
1.) 6.)
CONTAINER TYPE 2.) 7.)
FORD STANDARD Returnable Container 3.) 8.)
UNIQUE Returnable Container 4.) 9.)
EXPENDABLE Container 5.) 10.)
SHIPPING UNIT PHOTO (or Sketch) PART NAME: FORD USE ONLY
Shroud Lower CONCEPT PKG APPROV FINAL PKG APPROVAL
SUPPLIER NAME: MATERIAL FLOW ENGINE PLANT
XYZ Company APPROVED / NOT APPROVED WITH THE FOLLOWING
FORD SUPPLIER CODE: Approved as is Approved as is REQUESTED CHANGES & COMMENTS:
X123A
SUPPLIER ADDRESS: Approved with changes Approved with changes
17101 ROTUNDA DRIVE
DEARBORN, MI 48121 Not Approved Not Approved

PHONE: (313) 555-1212

FAX: (313) 555-1213 SIGNATURE: SIGNATURE:

CONTACT: JOHN DOE
TITLE: Packaging Engineer
CONTAINERS PER PALLET EMAIL: [email protected] DATE: DATE:
MIN: 4 MAX: 12 DATE: 1/25/2002
REMARK 1: REMEMBER, THE RESPONSIBILITY FOR ENSURING COMPONENT QUALITY FROM YOUR PLANT TO THE POINT OF USE REMAINS WITH YOU - THE SUPPLIER OF THE PRODUCT.
REMARK 2: ALL NEW CONTAINERS MUST BE LABELED ACCORDING TO CURRENT FORD PACKAGING GUIDELINES!
 MATERIAL HANDLING & PACKAGING ENGINEERING
CONTAINER IDENTIFICATION MASTER LIST
Dimensions TARE MAX
CONTAINER WEIGHT WEIGHT Standard / Non
CODE DESCRIPTION L W H (lbs) (lbs) Standard Container
AIAG0003 Tote 14.00 7.80 6.7 2.0 35
AIAG011 Pallet 32.00 30.00 6.8 34.5 2000
AIAG012 Lid 32.00 30.00 5 12.0 na
CS120705 PTO Standard Container (Orbis) 12.00 7.50 5 1.3 35
CS121505 PTO Standard Container (Orbis) 12.00 15.00 5 2.1 35
CS121509 PTO Standard Container (Orbis) 12.00 15.00 9.5 3.3 35
CS123009 PTO Standard Container (Orbis) 12.00 30.00 9.5 6.3 35 NON STANDARD CONTAINER
EN1218250 METAL FRAME W/ PLASTIC SIDES-CTI 48.00 45.00 27.00 556.0 1074 NON STANDARD CONTAINER
EN1284 VAC FORM TRAY(V-TECH PLASTICS LTD 22.00 22.00 1.00 2.0 100 NON STANDARD CONTAINER
EN1300 VAC FORM TRAY 47.00 22.00 7.00 12.0 92 NON STANDARD CONTAINER
EN14503 VAC FORM FULL TRAY 48.00 45.00 6.50 30.0 55 NON STANDARD CONTAINER
EN1556 MOLDED TRAY 22.50 12.00 5.00 10.0 32 NON STANDARD CONTAINER
EN1676 PLASTIC TRAY - RED OR YELLOW 43.00 24.00 8.00 20.0 36 NON STANDARD CONTAINER
EN1685 STEEL PALLET 51.00 49.00 8.00 255.0 4000 NON STANDARD CONTAINER
EN1685 STEEL PALLET 51.00 49.00 8.00 255.0 4000 NON STANDARD CONTAINER
EN1691 PLASTIC TRAY - GREEN/BLUE 43.00 24.00 8.00 19.0 36 NON STANDARD CONTAINER
EN1692 VAC FORM TRAY 47.50 44.50 5.25 22.8 313 NON STANDARD CONTAINER
EN1694 ENGINE VALVE KIT TRAY 16.00 9.00 3.00 2.5 6 NON STANDARD CONTAINER
EN1696 VAC FORM TRAY 48.00 45.00 6.00 23.0 192 NON STANDARD CONTAINER
EN1700 VAC FORM TRAY 47.00 44.50 3.50 16.0 84 NON STANDARD CONTAINER
EN1713 INJECTION MOLDED MAGAZINE 9.00 3.00 18.00 2.3 15 NON STANDARD CONTAINER
EN1717 PALLETAINER 45.00 48.00 28.00 721.0 4000 NON STANDARD CONTAINER
EN1721 1/2 SIZE VAC FORM TRAY 48.00 24.00 11.00 41.0 341 NON STANDARD CONTAINER
EN1722 VAC FORM 1/2 TRAY 44.00 23.50 5.50 12.0 60 NON STANDARD CONTAINER
EN1752 VAC FORM TRAY 39.00 45.00 4.00 15.4 78 NON STANDARD CONTAINER
EN1758 VAC FORM TRAY 22.00 47.00 1.00 7.0 25 NON STANDARD CONTAINER
EN1768 VAC FORM TRAY 22.00 16.00 2.00 2.0 100 NON STANDARD CONTAINER
EN1769 VAC FORM TRAY 22.00 16.00 3.00 2.0 100 NON STANDARD CONTAINER
EN1878 THERMOFORMED FULL TRAY 47.00 44.00 5.00 24.0 1500 NON STANDARD CONTAINER
EN1890 SF FULL TRAY(ROBINSON) 47.00 56.00 5.00 36.0 100 NON STANDARD CONTAINER
EN1891 1/12 SF KIT(ROBINSON) 24.00 7.00 4.00 4.0 35 NON STANDARD CONTAINER
EN1892 1/6 INJ MOLDED BLACK TRAY 24.00 13.00 3.00 15.0 35 NON STANDARD CONTAINER
EN1893 1/8 INJ MOLDED GRAY TRAY 12.00 22.00 2.00 4.0 35 NON STANDARD CONTAINER
EN1894 1/6 VAC FORM BLACK TRAY 15.00 22.00 2.00 2.0 35 NON STANDARD CONTAINER
EN1895 1/6 STRUC FOAM BLACK TRAY 16.00 22.00 3.00 4.0 35 NON STANDARD CONTAINER
EN1896 1/6 STRUC FOAM BLACK TRAY 16.00 22.00 2.00 4.0 35 NON STANDARD CONTAINER
EN1897 VAC FORM BLACK TRAY 48.00 45.00 1.00 15.0 100 NON STANDARD CONTAINER
EN1900 1/2 VAC FORM TRAY (TRIENDA) 54.00 22.00 7.00 10.0 100 NON STANDARD CONTAINER
EN1901 1/9 INJ MOLDED TRAY(CTI) 16.00 15.00 3.00 28.0 100 NON STANDARD CONTAINER
EN1902 VAC FORM TWIN TRAY 48.00 45.00 2.00 27.0 100 NON STANDARD CONTAINER
EN1903 1/6 INJ MOLDED GRAY TRAY 16.00 22.00 2.00 3.0 35 NON STANDARD CONTAINER
EN1905 RET PALLETBOX-ORANGE-ROBINSON 48.00 45.00 25.00 133.0 1000 NON STANDARD CONTAINER
EN1906 1/2 STRUC FOAM BLUE TRAY 24.00 44.00 6.00 20.0 100 NON STANDARD CONTAINER
EN1908L VAC FORM LID(TRIENDA) 54.00 44.00 4.00 25.0 na NON STANDARD CONTAINER
EN1908L VAC FORM LID(TRIENDA) 54.00 44.00 4.00 25.0 na NON STANDARD CONTAINER
EN1908P VAC FORM PALLET(TRIENDA) 54.00 44.00 7.00 45.0 4000 NON STANDARD CONTAINER
EN1908P VAC FORM PALLET(TRIENDA) 54.00 44.00 7.00 45.0 4000 NON STANDARD CONTAINER
EN1908PL VAC FORM PALLET & LID SET(TRIENDA 54.00 44.00 11.00 70.0 4000 NON STANDARD CONTAINER
EN1908PL VAC FORM PALLET & LID SET(TRIENDA 54.00 44.00 11.00 70.0 4000 NON STANDARD CONTAINER
EN1910 1/2 STRUC FOAM TRAY(ROBINSON) 22.00 47.00 5.00 23.0 100 NON STANDARD CONTAINER
EN1912 1/6 INJ MOLDED BLACK TRAY 12.00 22.00 3.00 6.0 35 NON STANDARD CONTAINER

9 of 17
 MATERIAL HANDLING & PACKAGING ENGINEERING
CONTAINER IDENTIFICATION MASTER LIST
Dimensions TARE MAX
CONTAINER WEIGHT WEIGHT Standard / Non
CODE DESCRIPTION L W H (lbs) (lbs) Standard Container
EN1913 EXTRUDED TUBES 22.00 1.00 1.00 1.0 2 NON STANDARD CONTAINER
EN1914 VAC FORM BLACK TRAY 44.00 23.00 4.00 11.0 35 NON STANDARD CONTAINER
EN1919 TUBES, PLASTIC MACHINED ORANGE 3.00 3.00 17.00 3.0 35 NON STANDARD CONTAINER
EN1920 TUBES, PLASTIC MACHINED ORANGE 3.00 3.00 17.00 3.0 35 NON STANDARD CONTAINER
EN1921 TUBES, STEEL ORANGE 3.00 3.00 17.00 3.0 35 NON STANDARD CONTAINER
EN1928 1/2 SF PURPLE TRAY 48.00 22.00 9.00 27.0 100 NON STANDARD CONTAINER
EN1930 STRUC FOAM BLACK TRAY 47.00 56.00 13.00 30.0 100 NON STANDARD CONTAINER
EN1933 1/2 VF TRAY(ROBINSON) 47.00 22.00 3.00 8.0 35 NON STANDARD CONTAINER
EN1936 1/2 VF TRAY(ROBINSON) 47.00 22.00 4.00 9.0 100 NON STANDARD CONTAINER
EN1937 VAC FORM TWIN TRAY 48.00 45.00 2.00 27.0 100 NON STANDARD CONTAINER
EN1956 TUBES, PLASTIC MACHINED BLUE 3.00 3.00 17.00 3.0 35 NON STANDARD CONTAINER
EN1957 TUBES, PLASTIC MACHINED BLUE 3.00 3.00 17.00 3.0 35 NON STANDARD CONTAINER
EN1958 TUBES, STEEL BLUE 3.00 3.00 17.00 3.0 35 NON STANDARD CONTAINER
EN1959 PALLETAINER, STEEL/PLASTIC 48.00 45.00 29.00 500.0 4000 NON STANDARD CONTAINER
EN1979 1/8 INJ MOLDED TRAY(CTI) 12.00 22.00 3.00 8.0 45 NON STANDARD CONTAINER
EN1980 1/2 STRUC FOAM BLACK TRAY 24.00 44.00 6.00 20.0 35 NON STANDARD CONTAINER
EN1998 THERMOFORMED HALF TRAY 47.30 23.00 9.00 12.0 1500 NON STANDARD CONTAINER
EN2019 VAC FORM TRAY 44.00 23.00 2.00 7.0 23 NON STANDARD CONTAINER
EN2275 1/4 VAC FORM TRAY(PENINSULA) 23.00 22.00 5.00 5.0 35 NON STANDARD CONTAINER
EN2276 1/2 VAC FORM TRAY(ROBINSON) 47.00 22.00 4.00 10.0 100 NON STANDARD CONTAINER
EN2308 MOLDED PLAS TRAY(ROBINSON/TRIEN 48.00 57.00 3.00 20.0 350 NON STANDARD CONTAINER
EN2315 VAC FORM FULL TRAY 56.00 44.00 6.00 35.0 100 NON STANDARD CONTAINER
EN2316 VF FULL TRAY(TRIENDA) 47.00 44.00 7.00 16.0 100 NON STANDARD CONTAINER
EN2318 RET PALLETBOX-BLUE(ROBINSON) 48.00 45.00 25.00 133.0 1000 NON STANDARD CONTAINER
EN2342 1/2 VAC FORM TRAY(ROBINSON) 23.00 44.00 6.00 9.0 100 NON STANDARD CONTAINER
EN2343 1/2 VAC FORM TRAY(ROBINSON) 23.00 44.00 6.00 13.0 100 NON STANDARD CONTAINER
EN2374 1/6 SHORT HT STRAIGHTWALL W/ POS 22.00 15.80 4.00 4.4 35 NON STANDARD CONTAINER
EN2386 PALLETAINER 45.00 48.00 28.00 721.0 4000 NON STANDARD CONTAINER
EN2400 VAC FORM TRAY 22.00 16.00 2.00 2.0 100 NON STANDARD CONTAINER
EN2401 VAC FORM TRAY 22.00 16.00 2.00 2.0 100 NON STANDARD CONTAINER
EN2402 VAC FORM TRAY 22.00 16.00 2.00 2.0 100 NON STANDARD CONTAINER
EN2470 INJ MOLDED POLYPROPELENE TRAY 24.00 18.00 3.00 18.0 35 NON STANDARD CONTAINER
EN2473 STACKABLE TRAY 22.00 15.40 1.00 4.0 100 NON STANDARD CONTAINER
EN2474 PLASTIC TRAY 22.20 15.80 2.80 4.3 100 NON STANDARD CONTAINER
EN2475 STRUC FOAM UNIOUE TRAY 12.00 11.00 5.00 4.0 35 NON STANDARD CONTAINER
EN2476 TWIN SHEET VAC FORM UNIQUE TRAY 48.00 45.00 7.00 30.0 35 NON STANDARD CONTAINER
EN2478 STRUC FOAM TRAY 42.00 28.00 6.00 20.0 40 NON STANDARD CONTAINER
EN2480 TWIN SHEET VAC FORM LID 57.00 48.00 3.00 20.0 na NON STANDARD CONTAINER
EN2480 TWIN SHEET VAC FORM LID 57.00 48.00 3.00 20.0 na NON STANDARD CONTAINER
EN2481 TWIN SHEET VAC FORM PALLET 57.00 48.00 3.00 80.0 4000 NON STANDARD CONTAINER
EN2481 TWIN SHEET VAC FORM PALLET 57.00 48.00 3.00 80.0 4000 NON STANDARD CONTAINER
EN24812480 TWIN SHEET VAC FORM PAL/LID SET 57.00 48.00 5.00 100.0 4000 NON STANDARD CONTAINER
EN2482 STEEL CONT W/ UNIQUE PERMANENT 60.00 48.00 50.00 680.0 1147 NON STANDARD CONTAINER
EN2484 STRUC FOAM INSERT IN ST37 TOTE 14.00 15.00 4.00 6.0 32 NON STANDARD CONTAINER
EN2491 MOLDED TRAY 22.00 16.00 3.00 3.0 100 NON STANDARD CONTAINER
EN2492 VAC FORM TRAY 15.00 21.00 2.00 1.0 35 NON STANDARD CONTAINER
EN2502 VAC FORM TRAY 47.00 22.00 3.00 15.0 100 NON STANDARD CONTAINER
EN2505 INJECTION MOLDED TRAY(TAN) 22.00 12.00 5.00 8.0 45 NON STANDARD CONTAINER
EN2506 VAC FORM HDPE TRAY-GREEN 44.00 47.00 6.00 32.0 908 NON STANDARD CONTAINER
EN2510 VAC FORM TRAY 20.00 9.00 3.00 1.0 35 NON STANDARD CONTAINER
EN2514 STEEL CONT W/ UNIQUE PERMANENT 60.00 48.00 50.00 680.0 1150 NON STANDARD CONTAINER

10 of 17
 MATERIAL HANDLING & PACKAGING ENGINEERING
CONTAINER IDENTIFICATION MASTER LIST
Dimensions TARE MAX
CONTAINER WEIGHT WEIGHT Standard / Non
CODE DESCRIPTION L W H (lbs) (lbs) Standard Container
EN2516 VAC FORM HDPE TRAY 43.00 44.00 5.00 18.0 253 NON STANDARD CONTAINER
EN2525 INJ MOLDED TRAY 24.00 22.00 2.00 5.0 40 NON STANDARD CONTAINER
EN2538 VAC FORM TRAY 44.00 24.00 5.00 9.2 100 NON STANDARD CONTAINER
EN2549 STRUC FOAM UNIQUE TRAY 26.00 8.00 9.00 3.0 35 NON STANDARD CONTAINER
EN2552 MOLDED PLASTIC TRAY 47.00 22.00 5.00 15.0 100 NON STANDARD CONTAINER
EN2557 MOLDED PLASTIC TRAY 47.00 22.00 6.00 38.0 100 NON STANDARD CONTAINER
EN2558 MOLDED PLASTIC TRAY 47.00 22.00 6.00 22.0 100 NON STANDARD CONTAINER
EN2606 MOLDED PLASTIC TRAY 43.00 22.00 5.00 15.0 100 NON STANDARD CONTAINER
EN2629 STEEL CONT W/ UNIQUE PERMANENT 60.00 48.00 50.00 680.0 1161 NON STANDARD CONTAINER
EN2693 INJECTION MOLDED TRAY(GREEN) 22.00 12.00 3.00 8.0 45 NON STANDARD CONTAINER
EN2694 INJECTION MOLDED TRAY(DARK BLUE) 22.00 12.00 2.00 8.0 45 NON STANDARD CONTAINER
EN2739 STRUC FOAM 1/2 TRAY 45.00 23.50 10.00 32.0 180 NON STANDARD CONTAINER
EN27401 VAC FORM BOTTOM TRAY 60.00 24.00 6.00 12.0 222 NON STANDARD CONTAINER
EN27402 VAC FORM TRAY 60.00 24.00 18.00 40.0 250 NON STANDARD CONTAINER
EN27403 VAC FORM TRAY 60.00 24.00 12.00 30.0 30 NON STANDARD CONTAINER
EN2750 STRUC FOAM 1/2 TRAY 57.40 23.80 10.50 28.0 85 NON STANDARD CONTAINER
EN2811 VAC FORM TRAY 44.40 33.40 5.00 17.0 117 NON STANDARD CONTAINER
EN3054 STACKABLE TOTE 43.00 22.00 14.00 18.0 72 NON STANDARD CONTAINER
EN3167 1/2 VF TRAY(ROBINSON) 47.00 22.00 3.00 10.0 100 NON STANDARD CONTAINER
EN3168 1/9 INJ MOLDED TRAY(CTI) 15.00 14.00 3.00 5.0 35 NON STANDARD CONTAINER
EN3169 1/6 INJ MOLDED TRAY(CTI) 23.00 14.00 5.00 10.0 35 NON STANDARD CONTAINER
EN3170 1/2 SF PURPLE TRAY 48.00 22.00 4.00 10.0 100 NON STANDARD CONTAINER
EN3171 TUBE W/ 2 CAPS(VISIPAK) 13.00 1.00 0.00 1.0 35 NON STANDARD CONTAINER
EN3173 1/12 SF KIT(CTI) 24.00 7.00 5.00 4.0 35 NON STANDARD CONTAINER
EN3180 1/2 SF TRAY(CTI) 24.00 44.00 9.00 54.0 100 NON STANDARD CONTAINER
EN3181 1/2 VAC FORM TRAY(TRIENDA) 24.00 22.00 7.00 18.0 100 NON STANDARD CONTAINER
EN3182 VAC FORM LID(TRIENDA) 48.00 45.00 3.00 20.0 na NON STANDARD CONTAINER
EN3182 VAC FORM LID (TRIENDA) 48.00 45.00 3.00 20.0 na NON STANDARD CONTAINER
EN3184 RET PALLETBOX-PURPLE/BROWN(ROBI 48.00 45.00 25.00 133.0 1000 NON STANDARD CONTAINER
EN3185 VAC FORM BLACK TRAY,WHITE STRIPE 48.00 45.00 1.00 18.0 100 NON STANDARD CONTAINER
EN3186 1/2 VF TRAY(TRIENDA) 47.00 26.00 6.00 17.0 100 NON STANDARD CONTAINER
EN3187 VAC FORM LID(TRIENDA) 48.00 54.00 3.00 25.0 na NON STANDARD CONTAINER
EN3187 VAC FORM LID(TRIENDA) 48.00 54.00 3.00 25.0 na NON STANDARD CONTAINER
EN3192 1/2 SF TRAY(CTI) 24.00 44.00 9.00 54.0 100 NON STANDARD CONTAINER
EN3194 1/2 SF TRAY(ROBINSON) 23.00 43.00 8.00 32.0 100 NON STANDARD CONTAINER
EN3195 1/10 INJ MOLDED TOTE 24.00 9.00 5.00 4.0 35 NON STANDARD CONTAINER
EN3204 1/2 SF BLACK TRAY 22.00 47.00 6.00 20.0 35 NON STANDARD CONTAINER
EN33172 INJ MOLDED TRAY 15.00 14.00 1.00 2.0 35 NON STANDARD CONTAINER
EN3318 1/2 SF TRAY(ROBINSON) 48.00 57.00 9.00 27.0 100 NON STANDARD CONTAINER
EN3327 MOLDED TRAY 22.00 16.00 2.00 2.0 100 NON STANDARD CONTAINER
EN3337 1/6 INJ MOLDED TRAY(CTI) 16.00 22.00 2.00 3.0 35 NON STANDARD CONTAINER
EN339020A RACK ASSY W/ GRAY CANVAS 48.00 57.00 50.00 752.0 1060 NON STANDARD CONTAINER
EN339020B RACK ASSY W/ GREEN CANVAS 48.00 57.00 50.00 752.0 1032 NON STANDARD CONTAINER
EN3391 VAC FORM TRAY 45.00 48.00 6.00 20.0 50 NON STANDARD CONTAINER
EN3392 VAC FORM TRAY 45.00 48.00 6.00 20.0 50 NON STANDARD CONTAINER
EN3572 1/2 VAC FORM TRAY(ROBINSON) 47.00 22.00 5.00 25.0 100 NON STANDARD CONTAINER
EN3899 TUBES, PLASTIC MACHINED PINK 3.00 3.00 17.00 3.0 35 NON STANDARD CONTAINER
EN3900 STEEL CONT W/ UNIQUE PERMANENT 60.00 48.00 50.00 680.0 1033 NON STANDARD CONTAINER
EN3901 STEEL CONT W/ UNIQUE PERMANENT 60.00 48.00 50.00 680.0 997 NON STANDARD CONTAINER
EN3950 INJECTION MOLDED TRAY(PURPLE) 22.00 12.00 2.00 6.0 45 NON STANDARD CONTAINER
EN3967 1/2 METRIC VF BLACK TRAY 39.00 23.00 4.00 7.0 100 NON STANDARD CONTAINER

11 of 17
 MATERIAL HANDLING & PACKAGING ENGINEERING
CONTAINER IDENTIFICATION MASTER LIST
Dimensions TARE MAX
CONTAINER WEIGHT WEIGHT Standard / Non
CODE DESCRIPTION L W H (lbs) (lbs) Standard Container
EN3968 48 X 40 VF LID(TRIENDA) 48.00 40.00 2.00 18.0 na NON STANDARD CONTAINER
EN3968 48 X 40 VF LID(TRIENDA) 48.00 40.00 2.00 18.0 na NON STANDARD CONTAINER
EN3975 TUBES, PLASTIC MACHINED PINK 3.00 3.00 17.00 3.0 35 NON STANDARD CONTAINER
EN4094 VAC FORM TRAY 39.00 45.00 4.00 14.3 80 NON STANDARD CONTAINER
EN4980 1/2 SF TRAY(ROBINSON) 48.00 22.00 7.00 18.0 100 NON STANDARD CONTAINER
EN5038 1/2 SF TRAY(ROBINSON) 23.00 43.00 8.00 32.0 100 NON STANDARD CONTAINER
EN5049 STRUC FOAM TRAY 23.50 44.00 6.00 23.0 52 NON STANDARD CONTAINER
EN5052 1/2 SF TRAY(ROBINSON) 47.00 22.00 9.00 18.0 100 NON STANDARD CONTAINER
EN5376819 PLASTIC GRAY TRAY(BURLINGTON) 47.50 44.50 5.00 25.0 41 NON STANDARD CONTAINER
EN562D163 MOLDED TRAY 47.00 22.00 4.00 24.0 88 NON STANDARD CONTAINER
EN578001 PLASTIC MOLDED TRAY-BLACK 22.00 15.75 4.50 5.6 100 NON STANDARD CONTAINER
EN581 METAL DUNNAGE W/ RACKS (BLUE) 51.50 43.50 5.00 725.0 998 NON STANDARD CONTAINER
EN678001 PLASTIC MOLDED TRAY-GRAY 22.00 15.75 4.50 5.6 100 NON STANDARD CONTAINER
EN7715 1/2 SF TRAY(CTI) 48.00 23.00 7.00 23.0 100 NON STANDARD CONTAINER
EN7971 VAC FORM HDPE TRAY 44.00 47.00 5.00 18.0 233 NON STANDARD CONTAINER
EN8350 STEEL BIN-POLY MOLDED SIDES 48.00 45.00 32.00 1200.0 4000 NON STANDARD CONTAINER
EN85903 METAL RACK 55.50 40.00 40.00 160.0 665 NON STANDARD CONTAINER
EN9524 PLASTIC MOLDED TRAY 57.00 24.00 12.00 14.0 73 NON STANDARD CONTAINER
ENSK1019 VAC FORM TRAY 23.50 22.00 1.00 2.0 100 NON STANDARD CONTAINER
SB1 KD PALLETBOX-BUCK/CONT/ROPAK/XY 30.00 32.00 25.00 69.0 1500
SB100 70 X 48 X 34 2-WINGED WALL P-BOX 70.00 48.00 34.00 159.0 750 NON STANDARD CONTAINER
SB101 70 X 48 X 34 1-WINGED WALL P-BOX 70.00 48.00 34.00 173.0 750 NON STANDARD CONTAINER
SB102 70 X 48 X 34 SOLID WALL PALLETBOX 70.00 48.00 34.00 190.0 750 NON STANDARD CONTAINER
SB104 70 X 48 X 50 2-WINGED WALL P-BOX 70.00 48.00 50.00 242.0 750 NON STANDARD CONTAINER
SB105 70 X 48 X 50 1-WINGED WALL P-BOX 70.00 48.00 50.00 172.0 750 NON STANDARD CONTAINER
SB106 70 X 48 X 50 SOLID WALL PALLETBOX 70.00 48.00 50.00 210.0 750 NON STANDARD CONTAINER
SB107 80 X 48 X 34 SOLID WALL PALLETBOX 80.00 48.00 34.00 270.0 750 NON STANDARD CONTAINER
SB12 KD PALLETBOX-BUCK/CONTICO/ROPAK 48.00 40.00 25.00 118.3 1800 NON STANDARD CONTAINER
SB17 KD PALLETBOX-ROPAK 48.00 40.00 29.00 126.0 1800 NON STANDARD CONTAINER
SB18 KD PALLETBOX-BUCKHORN 48.00 40.00 30.00 140.0 1800 NON STANDARD CONTAINER
SB22 KD PALLETBOX-BUCK/CONT/ROPAK/XY 48.00 40.00 34.00 132.3 1800 NON STANDARD CONTAINER
SB23 KD PALLETBOX (ROPAK/XYTEC) 48.00 40.00 39.00 130.0 1800 NON STANDARD CONTAINER
SB27 RIGID-WALL PALLETBOX (ROPAK/CONT 48.00 45.00 17.00 93.0 1800 NON STANDARD CONTAINER
SB31 KD PALLETBOX (BUCK/CONT/ROP/XYTE 48.00 45.00 25.00 107.0 1500
SB34 KD PALLETBOX (BUCKHORN) 48.00 45.00 30.00 140.0 1800 NON STANDARD CONTAINER
SB37 KD PALLETBOX (XYTEC) 48.00 45.00 32.00 128.0 1800 NON STANDARD CONTAINER
SB38 48 X 45 X 33 KNOCKDOWN PALLETBOX 48.00 45.00 33.00 138.0 1800 NON STANDARD CONTAINER
SB39 KD PBX 1 DROP DOOR / 1 REMOVABLE 48.00 45.00 34.00 141.0 1800 NON STANDARD CONTAINER
SB40 KD PBX FULL SIDE ACCESS W/FRAME 48.00 45.00 34.00 139.0 1800 NON STANDARD CONTAINER
SB41 KD PBX/DOOR ON 45" SIDE (XYTEC) 48.00 45.00 34.00 125.0 1800 NON STANDARD CONTAINER
SB42 WING WALL KD PALLETBOX(ROPAK/BU 48.00 45.00 34.00 139.0 1800 NON STANDARD CONTAINER
SB43 48 X 45 X 34 KNOCKDOWN PALLETBOX 48.00 45.00 34.00 132.0 1500
SB44 48 X 45 X 35 KNOCKDOWN PALLETBOX 48.00 45.00 35.00 134.0 1800 NON STANDARD CONTAINER
SB47 48 X 45 X 38 KNOCKDOWN PALLETBOX 48.00 45.00 38.50 145.0 1800 NON STANDARD CONTAINER
SB51 48 X 45 X 40 KNOCKDOWN PALLETBOX 48.00 45.00 40.50 155.5 1800 NON STANDARD CONTAINER
SB52 48 X 45 X 41.5 KNOCKDOWN PALLETBO 48.00 45.00 41.50 153.0 1800 NON STANDARD CONTAINER
SB53 48 X 45 X 42 KNOCKDOWN PALLETBOX 48.00 45.00 42.00 178.0 1200 NON STANDARD CONTAINER
SB54 48X45X42 WING-WALL KNOCKDOWN P- 48.00 45.00 42.00 168.0 1200 NON STANDARD CONTAINER
SB55 48X45X42 KD PBX W/ 1 STD & 1 RMVBL 48.00 45.00 42.00 169.0 1800 NON STANDARD CONTAINER
SB56 48 X 56 X 50 KNOCKDOWN PALLETBOX 48.00 56.00 50.00 169.0 1200 NON STANDARD CONTAINER
SB59 48 X 45 X 44 KNOCKDOWN PALLETBOX 48.00 45.00 44.00 167.0 1800 NON STANDARD CONTAINER

12 of 17
 MATERIAL HANDLING & PACKAGING ENGINEERING
CONTAINER IDENTIFICATION MASTER LIST
Dimensions TARE MAX
CONTAINER WEIGHT WEIGHT Standard / Non
CODE DESCRIPTION L W H (lbs) (lbs) Standard Container
SB6 KD PALLETBOX-BUCKHORN/CONTICO 30.00 32.00 30.00 79.0 1800 NON STANDARD CONTAINER
SB63 48 X 45 X 48 KNOCKDOWN PALLETBOX 48.00 45.00 48.00 167.0 1000 NON STANDARD CONTAINER
SB64 48X45X48 WING-WALL KNOCKDOWN P- 48.00 45.00 48.00 186.0 1000 NON STANDARD CONTAINER
SB67 48 X 45 X 50 KNOCKDOWN PALLETBOX 48.00 56.00 50.00 188.0 1200 NON STANDARD CONTAINER
SB69 48 X 45 X 50 FULL ACCESS CONTAINER 48.00 56.00 50.00 190.0 1200 NON STANDARD CONTAINER
SB71 48 X 45 X 55 KNOCKDOWN PALLETBOX 48.00 45.00 55.00 175.0 1800 NON STANDARD CONTAINER
SB75 48 X 45 X 57 KNOCKDOWN PALLETBOX 48.00 56.00 50.00 177.0 1200 NON STANDARD CONTAINER
SB79 48 X 45 X 64 KNOCKDOWN PALLETBOX 48.00 45.00 64.00 200.0 1800 NON STANDARD CONTAINER
SB83 48 X 45 X 66 KNOCKDOWN PALLETBOX 48.00 45.00 66.00 202.0 1800 NON STANDARD CONTAINER
SB84 54 X 48 X 34 KNOCKDOWN PALLETBOX 54.00 48.00 34.00 200.0 1000 NON STANDARD CONTAINER
SB85 59 X 45 X 45 KNOCKDOWN PALLETBOX 59.00 45.00 45.00 240.0 1800 NON STANDARD CONTAINER
SB88 64 X 48 X 19 SOLID-WALL PALLETBOX 64.00 48.00 19.00 124.0 750 NON STANDARD CONTAINER
SB89 64 X 48 X 25 TWO DOOR KNOCKDOWN 64.00 48.00 25.00 149.0 750
SB9 KD PALLETBOX-BUCKHORN/ROPAK/XY 30.00 32.00 34.00 84.3 1500 NON STANDARD CONTAINER
SB90 64 X 48 X 34 TWO-WINGED WALL PBX 64.50 48.00 34.00 160.0 750 NON STANDARD CONTAINER
SB91 64 X 48 X 34 SOLID-WALL PALLETBOX 64.00 48.00 34.00 178.0 750
SB92 64 X 48 X 34 ONE-WINGED WALL PBX 64.50 48.00 34.00 167.5 750 NON STANDARD CONTAINER
SB93 64 X 48 X 50 SOLID-WALL PBX 64.50 48.00 50.00 0.0 750 NON STANDARD CONTAINER
SB94 64 X 48 X 50 WINGED WALL PBX 64.00 48.00 50.00 213.0 750 NON STANDARD CONTAINER
SB95 64 X 48 X 41 PALLETBOX 64.50 48.00 41.00 210.0 750 NON STANDARD CONTAINER
SL1 36x32 Vac Form Lid (Robinson) 36.00 32.00 3 na NON STANDARD CONTAINER
SL10 48x45 Vac Form Lid (Robinson) 48.00 45.00 3 18.0 na
SL11 STRUC FOAM LID(BUCKHORN) 48.00 45.00 2.00 19.7 na NON STANDARD CONTAINER
SL14 48x45 Vac Form Lid 48.00 45.00 3 18.0 na
SL16 Contico Vac Form Lid na NON STANDARD CONTAINER
SL17 48"x45" ID Vac Form Lid with 4" Lip (Robin 48.00 45.00 4 na NON STANDARD CONTAINER
SL18 Cookson. 30.00 32.00 2 23.0 na NON STANDARD CONTAINER
SL2 48x45 Contico Romeo II Structural Foam Li 49.00 46.00 2.16 23.0 na NON STANDARD CONTAINER
SL20 48x40 Structural Foam Lid na NON STANDARD CONTAINER
SL21 48x40 Vac Form Lid (Robinson) na NON STANDARD CONTAINER
SL3 36x32 Rotocast Lid 36.00 32.00 2 na NON STANDARD CONTAINER
SL36 45x45 Vac Form Twin Sheet Lid (Robinson 45.00 45.00 4 na NON STANDARD CONTAINER
SL4 Open na NON STANDARD CONTAINER
SL5 48 x 45 Vacuum formed Lid (Buckhorn) 48.00 45.00 3 18.0 na
SL50 54" x 48" OD Structural Foam Lid (Robinso 54.00 48.00 2 35.0 na NON STANDARD CONTAINER
SL6 CAPS 48x45 Lid (Mfg. T.B.D.) na NON STANDARD CONTAINER
SL7 48x45 OD Structural Foam Lid (Robinson) 30.0 na NON STANDARD CONTAINER
SL8 48x45 ID Structural Foam Lid (Robinson) 30.0 na NON STANDARD CONTAINER
SL9 48x45 Vac Form "Bedford" Lid (Robinson) 48.00 45.00 2 18.0 na NON STANDARD CONTAINER
SMF1 SMF steel container 32.00 32.00 18 186.0 2000
SMF2 SMF steel container 32.00 32.00 26 226.0 2000
SMF3 SMF steel container 48.00 45.00 18 288.0 3000
SMF4 SMF steel container 48.00 45.00 26 346.0 3000
SMF5 SMF steel container 53.00 48.00 18 316.0 4000
SMF6 SMF steel container 53.00 48.00 26 382.0 4000
SMF7 SMF steel container 78.00 48.00 18 426.0 4000
SMF8 SMF steel container 78.00 48.00 26 515.0 4000
SMF9 SMF steel container 108.00 48.00 26 688.0 4000
SP1 36x32 Roto Cast Pallet (CTI) 36.00 32.00 7 29.0 NON STANDARD CONTAINER
SP10 Contico 45 X 48 Ohio Pallet (Injection Mold 48.50 45.50 5.5 NON STANDARD CONTAINER
SP11 STRUC FOAM PALLET (BUCKHORN) 48.00 45.00 7.00 48.5 4000 NON STANDARD CONTAINER

13 of 17
 MATERIAL HANDLING & PACKAGING ENGINEERING
CONTAINER IDENTIFICATION MASTER LIST
Dimensions TARE MAX
CONTAINER WEIGHT WEIGHT Standard / Non
CODE DESCRIPTION L W H (lbs) (lbs) Standard Container
SP12 Contico Lightweight 45 X 48 Pallet (Injectio 48.00 45.00 6.5 31.0 NON STANDARD CONTAINER
SP13 EPC 45 X 48 Pallet (Structural Foam) 48.00 45.00 6.25 NON STANDARD CONTAINER
SP14 Robinson 45 X 48 Pallet (Structual Foam) 48.00 45.00 5 67.0
SP14SL11 STRUC FOAM PALLET LID SET 48.00 45.00 8.00 81.7 8000 NON STANDARD CONTAINER
SP14SL7 STRUC FOAM PALLET LID SET-ROBINS 48.00 45.00 9.00 94.0 8000 NON STANDARD CONTAINER
SP15 Robinson Twin Sheet Pallet 32.00 36.00 5 30.0 NON STANDARD CONTAINER
SP15SL15 VF PALLET & LID SET-PENDA 48.00 47.00 6.00 70.0 2000 NON STANDARD CONTAINER
SP16 48x45 Contico Romeo II (Structural Foam) 48.50 45.75 5 63.0
SP16SL2 CONTICO ID PALLET/LID SET-ROMEO 1 48.50 45.80 8.00 85.0 4000 NON STANDARD CONTAINER
SP17 Robinson Twin Sheet Pallet 48.00 45.00 6 90.0 NON STANDARD CONTAINER
SP18 Cookson. 32.00 38.00 5 35.0 2000 NON STANDARD CONTAINER
SP1SL3 ARMIN 32X36 ROTO CAST PALLET/LID 32.00 36.00 10.00 44.0 1500 NON STANDARD CONTAINER
SP2 36x32 Twin Sheet Pallet (Robinson) 37.25 33.25 7.25 NON STANDARD CONTAINER
SP20 48 X 40 Structural Foam Pallet (Lewis/Buc 48.00 40.00 6 40.0 NON STANDARD CONTAINER
SP20SL21 ROBINSON 48X40 SF PALLET/VF LID 48.00 40.00 8.00 57.0 4000 NON STANDARD CONTAINER
SP21 48 X 40 Structural Foam or Inj. Molded Pall 48.00 40.00 6.6 40.0 NON STANDARD CONTAINER
SP22 HDPE 48X40 INTEGRAL PALLET/LID 48.00 40.00 6.00 51.0 4000 NON STANDARD CONTAINER
SP23 48 X 40 Structural Foam Pallet (Buckhorn S 47.70 39.70 6.8 42.4 NON STANDARD CONTAINER
SP24SL22 VAC FORM EURO PALLET/LID SET 48.00 40.00 8.00 63.0 4000 NON STANDARD CONTAINER
SP25SL4 SFOAM PALLET-ORBIS &LID-0RBls SET 32.00 45.00 8.00 63.0 4000 NON STANDARD CONTAINER
SP2SL1 ROBINSON 32X36 TWIN SHEET VF P/LID 37.20 33.30 10.00 42.0 1500 NON STANDARD CONTAINER
SP3 Open NON STANDARD CONTAINER
SP31 30 X 32 Vacuum Form Pallet (Robinson) 30.00 32.00 5 NON STANDARD CONTAINER
SP32 30 X 32 Structural Foam Pallet (Robinson) 30.00 32.00 4.5 NON STANDARD CONTAINER
SP38 45x45 Twin Sheet Vac Form Pallet 45.00 45.00 8 NON STANDARD CONTAINER
SP39SL39 48X52 PALLET/LID SET(ROBINSON) 48.00 52.00 8.00 94.0 1000 NON STANDARD CONTAINER
SP4 Open NON STANDARD CONTAINER
SP40 Robinson 48 X 54 Pallet (Structual Foam) 47.88 53.88 6 NON STANDARD CONTAINER
SP403187 SF PALLET W/ UNIQUE VF TRAY 48.00 54.00 8.00 100.0 8000 NON STANDARD CONTAINER
SP41 Robinson 48 X 54 Structual Foam Pallet 47.80 56.80 6.1 NON STANDARD CONTAINER
SP42 Kadon 48" X 54" Structural Foam Pallet 45.00 45.00 6 NON STANDARD CONTAINER
SP44 CAPS 48" X 45" Pallet Base (dimensions & weight T.B.D.) NON STANDARD CONTAINER
SP49 Robinson 48 X 57 Structural Foam Pallet 48.00 57.00 6.5 NON STANDARD CONTAINER
SP49SL49 SF PALLET & LID SET (ROBINSON) 48.00 57.00 8.00 103.0 4000 NON STANDARD CONTAINER
SP5 Lewis Convoy I Pallet (Structural Foam) 48.00 45.00 6.75 45.0 NON STANDARD CONTAINER
SP50 Robinson 48 X 57 Pallet (Structual Foam) 47.88 56.88 6.125 NON STANDARD CONTAINER
SP50SL50 48X60 PALLET/LID SET 48.00 60.00 8.00 77.0 4000 NON STANDARD CONTAINER
SP56 Robinson 48 X 60 Structural Foam Pallet 47.25 59.25 5 NON STANDARD CONTAINER
SP57 Robinson 48 X 60 Pallet (Structual Foam) 47.88 59.88 6 NON STANDARD CONTAINER
SP6 Lewis Convoy II Pallet (Structural Foam) 48.00 45.00 7.5 62.0 NON STANDARD CONTAINER
SP66 32 X 48 Orbis Metric Size Pallet 32.00 48.00 6 NON STANDARD CONTAINER
SP6SL6 STRUC FOAM PALLET & LID SET 48.00 45.00 9.00 86.0 4000 NON STANDARD CONTAINER
SP7 OD STRUC FOAM PALLET (ROBINSON) 48.00 45.00 2.00 62.0 2000 NON STANDARD CONTAINER
SP7SL10 ROBINSON 45X48 OD PALLET/LID SET 48.00 45.00 7.00 81.0 4000 NON STANDARD CONTAINER
SP7SL7 ROBINSON 45X48 OD PALLET/LID SET 48.00 45.00 7.00 94.0 4000 NON STANDARD CONTAINER
SP7SL9 ROBINSON 45X48 OD PALLET/LID SET 48.00 45.00 7.00 81.0 4000 NON STANDARD CONTAINER
SP8 Robinson 45 X 48 ID (BLUE) Inserted Pallet 48.50 45.50 5 60.0 4000 NON STANDARD CONTAINER
SP8SL10 ROBINSON 45X48 ID (BLUE) PALL/LID 48.50 45.50 7.00 92.0 4000 NON STANDARD CONTAINER
SP8SL8 ROBINSON 45X48 ID PALL/LID (BLUE) 48.50 45.50 7.00 92.0 4000 NON STANDARD CONTAINER
SP8SL9 ROBINSON 45X48 ID (BLUE) PALL/LID 48.50 45.50 7.00 92.0 4000 NON STANDARD CONTAINER
SP9 VAC FORM PALLET & LID(ROBINSON) 48.00 45.00 5.00 20.0 4000 NON STANDARD CONTAINER

14 of 17
 MATERIAL HANDLING & PACKAGING ENGINEERING
CONTAINER IDENTIFICATION MASTER LIST
Dimensions TARE MAX
CONTAINER WEIGHT WEIGHT Standard / Non
CODE DESCRIPTION L W H (lbs) (lbs) Standard Container
SP9SL21 VAC FORM PALLET LID SET(ROBINSON) 48.00 45.00 7.00 37.0 4000 NON STANDARD CONTAINER
ST1 1/24 Cross stack tote 12.00 7.50 4 1.6 35 NON STANDARD CONTAINER
ST100 STRAIGHT WALL TOTE - ORBIS METRIC 11.80 7.90 4.70 1.2 35 NON STANDARD CONTAINER
ST101 STRAIGHT WALL TOTE - ORBIS METRIC 11.80 7.90 8.70 1.5 35 NON STANDARD CONTAINER
ST102 STRAIGHTWALL TOTE-ORBIS/METRIC 15.80 11.80 4.70 4.0 35 NON STANDARD CONTAINER
ST103 STRAIGHTWALL TOTE(ORBIS/METRIC) 15.80 11.80 6.70 4.0 35 NON STANDARD CONTAINER
ST104 STRAIGHT WALL TOTE - ORBIS METRIC 15.80 11.80 8.70 3.2 35 NON STANDARD CONTAINER
ST105 STRAIGHT WALL TOTE - ORBIS METRIC 15.80 11.80 10.60 3.4 35 NON STANDARD CONTAINER
ST106 STRAIGHT WALL TOTE - ORBIS METRIC 15.80 11.80 12.80 3.7 35 NON STANDARD CONTAINER
ST107 STRAIGHT WALL TOTE - ORBIS METRIC 23.60 15.80 3.00 2.6 35 NON STANDARD CONTAINER
ST108 STRAIGHT WALL TOTE - ORBIS METRIC 23.60 15.80 4.70 5.0 35 NON STANDARD CONTAINER
ST109 STRAIGHT WALL TOTE - ORBIS METRIC 23.60 15.80 6.70 4.6 35 NON STANDARD CONTAINER
ST110 STRAIGHT WALL TOTE - ORBIS METRIC 23.60 15.80 8.70 6.0 35 NON STANDARD CONTAINER
ST111 STRAIGHT WALL TOTE - ORBIS METRIC 23.60 15.80 12.80 8.4 35 NON STANDARD CONTAINER
ST112 STRAIGHT WALL TOTE - ORBIS METRIC 23.60 15.80 16.70 9.5 35 NON STANDARD CONTAINER
ST114 STRAIGHTWALL TOTE-SCHAEFER METR 11.70 15.60 8.50 4.6 35 NON STANDARD CONTAINER
ST115 STRAIGHTWALL TOTE-SCHAEFER METR 11.70 15.60 11.10 5.7 35 NON STANDARD CONTAINER
ST116 STRAIGHTWALL TOTE-SCHAEFER METR 15.60 23.40 5.90 6.2 35 NON STANDARD CONTAINER
ST117 STRAIGHTWALL TOTE-SCHAEFER METR 15.60 23.40 6.90 6.6 35 NON STANDARD CONTAINER
ST118 STRAIGHTWALL TOTE-SCHAEFER METR 15.60 23.40 8.50 8.1 35 NON STANDARD CONTAINER
ST119 STRAIGHTWALL TOTE-SCHAEFER METR 15.60 23.40 11.10 9.7 35 NON STANDARD CONTAINER
ST14 1/15 SIZE SF MOD TOTE-ROBINSON 15.70 8.80 5.20 3.0 35 NON STANDARD CONTAINER
ST17 1/16 SHORT HT ROBINSON 11.80 11.20 4.00 4.0 35 NON STANDARD CONTAINER
ST18 1/11 UNIQUE TOTE 15.00 12.00 5.00 3.0 35 NON STANDARD CONTAINER
ST19 1/12 VERY SHORT HGHT STRAIGHTWAL 12.00 15.00 3.90 1.3 35 NON STANDARD CONTAINER
ST21 1/12 SHORT HT STRAIGHTWALL TOTE 12.00 15.00 5.00 1.6 35 NON STANDARD CONTAINER
ST22 1/12 SHORT HT STRAIGHTWALL TOTE 12.00 15.00 5.50 2.4 35 NON STANDARD CONTAINER
ST23 1/12 SHORT HT STACK & NEST TOTE 12.00 15.00 7.50 2.8 35 NON STANDARD CONTAINER
ST24 1/12 SHORT HT STACK & NEST TOTE 12.00 15.00 5.50 2.4 35 NON STANDARD CONTAINER
ST25 1/12 MED HT STRAIGHTWALL TOTE 12.00 15.00 7.50 2.9 35 NON STANDARD CONTAINER
ST26 Cross-stack 12.00 15.00 7.5 2.8 35
ST28 1/12 TALL HT STRAIGHTWALL TOTE 12.00 15.00 9.50 4.4 35 NON STANDARD CONTAINER
ST29 1/12 TALL HT STRTWALL COLLAP TOTE 11.00 15.00 13.00 6.0 35 NON STANDARD CONTAINER
ST3 1/24 SHORT HT STRAIGHTWALL TOTE 12.00 7.50 5.00 1.3 35 NON STANDARD CONTAINER
ST32 1/8 SHORT HT NEST TOTE(BUCKHORN) 23.50 10.90 9.00 6.1 35 NON STANDARD CONTAINER
ST33 1/8 MED HEIGHT NESTABLE TOTE 19.70 11.80 7.30 3.2 35 NON STANDARD CONTAINER
ST34 1/8 TALL STRAIGHTWALL TOTE 24.00 11.20 9.50 4.3 35 NON STANDARD CONTAINER
ST35 1/8 TALL NESTABLE TOTE(BUCKHORN) 23.50 10.90 14.00 7.6 35 NON STANDARD CONTAINER
ST36 1/8 VERY TALL STRAIGHTWALL TOTE 21.90 12.70 13.40 5.9 35 NON STANDARD CONTAINER
ST37 1/9 SIZE-S.F. MOD TOTE-ROBINSON 15.70 14.70 5.20 6.0 35 NON STANDARD CONTAINER
ST39 Cross-stack 24.00 15.00 7.5 4.8 35
ST40 Cross-stack 24.00 15.00 11.5 5.8 35
ST41 Cross-stack 24.00 15.00 14.5 8.1 35
ST42 1/6 SIZE VERY SHORT HGHT SF MOD T 22.20 15.60 5.30 7.5 35 NON STANDARD CONTAINER
ST43 1/6 SHORT HEIGHT NESTABLE TOTE 21.80 15.10 5.50 4.7 35 NON STANDARD CONTAINER
ST44 1/6 SHORT HEIGHT STACK & NEST 24.00 11.20 9.50 4.7 35 NON STANDARD CONTAINER
ST45 1/6 SHORT HEIGHT STRAIGHTWALL 24.00 15.00 5.00 3.6 35 NON STANDARD CONTAINER
ST46 1/6 SHORT HEIGHT STRAIGHTWALL 24.00 15.00 5.50 3.7 35 NON STANDARD CONTAINER
ST47 1/6 MED HEIGHT STRAIGHTWALL TOTE 24.00 15.00 7.50 4.7 35 NON STANDARD CONTAINER
ST48 1/6 MED HT NESTABLE TOTE(BUCKHOR 15.00 8.00 8.00 3.0 35 NON STANDARD CONTAINER
ST49 1/6 VERY SHORT-S.F.TOTE-ROBINSON 22.10 15.70 5.30 8.0 35 NON STANDARD CONTAINER

15 of 17
 MATERIAL HANDLING & PACKAGING ENGINEERING
CONTAINER IDENTIFICATION MASTER LIST
Dimensions TARE MAX
CONTAINER WEIGHT WEIGHT Standard / Non
CODE DESCRIPTION L W H (lbs) (lbs) Standard Container
ST50 1/6 MED HEIGHT STACK & NEST TOTE 12.00 15.00 7.50 4.7 35 NON STANDARD CONTAINER
ST52 1/6 MED HEIGHT NESTABLE TOTE 20.70 13.50 6.50 5.2 35 NON STANDARD CONTAINER
ST53 1/6 TALL HEIGHT NESTABLE TOTE 21.80 15.20 9.80 5.3 35 NON STANDARD CONTAINER
ST54 1/6 TALL HEIGHT NESTABLE TOTE 21.80 16.00 9.30 5.5 35 NON STANDARD CONTAINER
ST55 1/6 TALL HEIGHT STRAIGHTWALL TOTE 24.00 15.00 9.50 5.3 35 NON STANDARD CONTAINER
ST56 1/6 TALL HEIGHT STACK & NEST TOTE 24.00 15.00 9.50 5.2 35 NON STANDARD CONTAINER
ST57 1/6 TALL HEIGHT NESTABLE TOTE 21.90 15.50 10.50 5.4 35 NON STANDARD CONTAINER
ST58 1/6 VERY TALL HGHT STRAIGHTWALL 24.00 15.00 14.50 7.3 35 NON STANDARD CONTAINER
ST59 1/6 VERY TALL HGHT STRAIGHTWALL 24.00 15.00 9.50 8.9 35 NON STANDARD CONTAINER
ST6 1/16 SIZE 6" TOTE-ROBINSON 11.80 11.20 7.30 4.0 35 NON STANDARD CONTAINER
ST60 1/6 VERY TALL HGHT NESTABLE TOTE 20.60 13.20 11.60 5.9 35 NON STANDARD CONTAINER
ST61 1/6 VERY TALL HGHT NESTABLE TOTE 21.80 15.10 12.90 6.2 35 NON STANDARD CONTAINER
ST62 1/6 VERY TALL HGHT NESTABLE TOTE 23.50 15.70 13.00 6.7 35 NON STANDARD CONTAINER
ST64 1/4 LONG LGTH SHORT HGHT STRAIG 32.00 15.00 7.50 5.8 35 NON STANDARD CONTAINER
ST65 1/4 SIZE TOTE (BUCKHORN) 27.00 16.90 12.50 9.0 35 NON STANDARD CONTAINER
ST67 1/4 SIZE VERY SHORT HT SF MOD TOT 22.00 23.80 5.30 12.0 35 NON STANDARD CONTAINER
ST68 1/4 SIZE BUCKHORN TOTE 23.50 18.90 14.00 10.9 35 NON STANDARD CONTAINER
ST69 1/4 MEDIUM HEIGHT STRAIGHTWALL 24.00 22.50 7.30 5.5 35 NON STANDARD CONTAINER
ST7 1/16 SHORT HT SF TOTE(ROBINSON) 11.80 11.10 7.50 3.0 35 NON STANDARD CONTAINER
ST70 1/4 TALL HT SQUARE NEST TOTE(BUCK 11.80 18.90 14.00 10.9 35 NON STANDARD CONTAINER
ST71 1/4 TALL HEIGHT STRAIGHTWALL 24.00 22.50 8.70 6.2 35 NON STANDARD CONTAINER
ST72 1/4 TALL HEIGHT STRAIGHTWALL 24.00 22.50 14.50 8.1 35 NON STANDARD CONTAINER
ST73 1/4 VERY TALL HEIGHT STRAIGHTWALL 24.00 22.50 10.90 7.1 35 NON STANDARD CONTAINER
ST74 1/4 LONG LENGTH TALL HT NEST TOTE 47.80 11.00 14.00 13.8 35 NON STANDARD CONTAINER
ST75 1/3 LONG LENGTH MED TALL STRGHTW 48.00 15.00 7.50 7.5 35 NON STANDARD CONTAINER
ST76 1/3 LONG LENGTH MED TALL STRGHTW 48.00 15.00 10.80 9.3 35 NON STANDARD CONTAINER
ST77 1/2 PLASTIC CORRUGATED TOTE 46.50 19.50 7.00 15.0 35 NON STANDARD CONTAINER
ST78 Cross-stack 48.00 15.00 7.5 8.1 35
ST79 1/2 SIZE VERY SHORT HT SF MOD TOT 22.00 47.40 5.20 22.0 35 NON STANDARD CONTAINER
ST8 1/16 SHORT HT NEST TOTE-BUCKHORN 11.80 10.90 7.50 3.0 35 NON STANDARD CONTAINER
ST80 Cross-stack 3.00 15.00 10.8 9.9 35
ST82 1/2 SIZE SHORT HGHT SF MODULAR TO 22.00 47.30 6.30 17.5 35 NON STANDARD CONTAINER
ST83 1/2 SIZE MED HGHT SF MODULAR TOTE 22.00 47.30 8.30 22.0 35 NON STANDARD CONTAINER
ST84 1/2 SIZE TALL HGHT SF MODULAR TOT 22.00 47.30 9.30 23.3 35 NON STANDARD CONTAINER
ST85 1/2 TALL HT NEST TOTE 15.20 10.90 9.70 2.7 35 NON STANDARD CONTAINER
ST86 1/2 TALL HT NEST TOTE W/ COVER 48.40 22.00 14.00 33.0 35 NON STANDARD CONTAINER
ST87 Cross-stack 24.00 22.50 7.5 5.7 35
ST89 STACK & NEST TOTES 24.00 20.00 13.00 6.1 35 NON STANDARD CONTAINER
ST9 1/16 SHORT HT NEST TOTE 11.80 9.80 7.70 1.8 35 NON STANDARD CONTAINER
ST90 STACK & NEST TOTES 26.10 18.70 10.50 5.4 35 NON STANDARD CONTAINER
ST91 1/4 SIZE TALL HGHT STACK & NEST 23.60 19.70 11.20 4.9 35 NON STANDARD CONTAINER
ST92 STRAIGHTWALL ORBIS TOTE 32.00 15.00 7.50 5.8 35 NON STANDARD CONTAINER
ST93 1/3 MED LENGTH MED TALL STRGHTWA 48.00 15.00 7.50 7.5 35 NON STANDARD CONTAINER
ST94 1/3 MED LENGTH MED TALL STRGHTWA 48.00 15.00 9.50 11.3 35 NON STANDARD CONTAINER
ST95 Cross-stack 24.00 22.50 10.9 6.4 35
ST96 Cross-stack 24.00 22.50 14.5 7.3 35
ST97 32.00 15.00 7.50 35 NON STANDARD CONTAINER
ST98 STRAIGHTWALL TOTE(SCHAEFER/METR 7.80 11.70 5.90 2.0 35 NON STANDARD CONTAINER
ST99 STRAIGHTWALL TOTE(SCHAEFER/METR 11.70 15.60 5.90 4.0 35 NON STANDARD CONTAINER
TA12 PURPLE 1/4 SIZE SF TRAY - 7G391 21.30 23.30 6.30 10.5 75 NON STANDARD CONTAINER
TA22 WIRE INSERT FOR ST21-SIDE GEAR 9.40 13.10 4.40 1.6 35 NON STANDARD CONTAINER

16 of 17
 MATERIAL HANDLING & PACKAGING ENGINEERING
CONTAINER IDENTIFICATION MASTER LIST
Dimensions TARE MAX
CONTAINER WEIGHT WEIGHT Standard / Non
CODE DESCRIPTION L W H (lbs) (lbs) Standard Container
TA23 WIRE INSERT FOR ST21 - SIDE GEAR 9.40 13.10 4.40 2.6 35 NON STANDARD CONTAINER
TA27 PLAST CORR INS FOR ST55 - 7F293 21.50 13.10 4.20 3.5 16 NON STANDARD CONTAINER
ZE1 COC ZE1 BIN 48.00 33.00 28.00 360.0 7000 NON STANDARD CONTAINER
ZE11 COC ZE11 BIN 84.50 54.00 49.50 625.0 4000 NON STANDARD CONTAINER
ZE12 COC ZE12 BIN 48.00 40.00 31.00 200.0 5000 NON STANDARD CONTAINER
ZE13 COC ZE13 BIN 53.00 48.00 38.00 365.0 6000 NON STANDARD CONTAINER
ZE21 COC ZE21 BIN 54.00 44.00 49.50 470.0 5000 NON STANDARD CONTAINER
ZE22 COC ZE22 BIN 84.50 54.00 49.50 490.0 3000 NON STANDARD CONTAINER
ZE34130 COC ZE34/130 RACK BIN ASSY 80.00 39.00 34.00 465.0 6000 NON STANDARD CONTAINER
ZE35131 COC ZE35/131 RACK BIN ASSY 80.00 48.00 34.00 480.0 6000 NON STANDARD CONTAINER
ZE4 COC ZE4 BIN 33.00 24.00 16.00 162.0 7000 NON STANDARD CONTAINER
ZE54 COC ZE54 BIN 80.00 39.00 34.00 475.0 6000 NON STANDARD CONTAINER
ZE54139 COC ZE54/139 RACK BIN ASSY 80.00 39.00 34.00 475.0 6000 NON STANDARD CONTAINER
ZE67 COC ZE67 BIN 67.00 54.00 49.50 390.0 3000 NON STANDARD CONTAINER

17 of 17