Scribd
Upload
96 views2 pages

Throttle Body With Integrated Stepper Motor: Technical Data Sheet

This document provides technical specifications for a throttle body with an integrated stepper motor. It includes details on variations, dimensions, connections, weight, mechanical data, environmental conditions, and stepper motor characteristics. The throttle body comes in different diameter options from 48mm to 68mm and includes standard or high temperature versions. Connections include a 10-pole military connector for the stepper motor. Weights range from 2.5kg to 2.7kg depending on the specific model. The stepper motor provides a resolution of 0.05625 degrees and can open the throttle from 10% to 90% in 40ms.

Uploaded by

Jorge Resendez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
96 views2 pages

Throttle Body With Integrated Stepper Motor: Technical Data Sheet

This document provides technical specifications for a throttle body with an integrated stepper motor. It includes details on variations, dimensions, connections, weight, mechanical data, environmental conditions, and stepper motor characteristics. The throttle body comes in different diameter options from 48mm to 68mm and includes standard or high temperature versions. Connections include a 10-pole military connector for the stepper motor. Weights range from 2.5kg to 2.7kg depending on the specific model. The stepper motor provides a resolution of 0.05625 degrees and can open the throttle from 10% to 90% in 40ms.

Uploaded by

Jorge Resendez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Technical Data Sheet

Throttle Body with Integrated Stepper Motor


P/N 30.43.100-D, P/N 30.43.100-D-HT, P/N 30.43.105-D, P/N 30.43.105-D-HT

Variations
∙ Standard diameters D of the throttle (see drawing) 60 mm (2.36"), 68 mm (2.68")
∙ Possible diameters of the throttle 48 mm (1.89") to 68 mm (2.68")

Dimensions
∙ Length/width of mounting flange 111.7 mm(4.40")
∙ Hole spacing on the mounting flange 75 mm (2.95”)
∙ Height of mounting flange 61 mm (2.40")
∙ Length including stepper motor 257.9 mm (10.15") (standard version)
272.9 mm (10.74") (HT version)
∙ Width of stepper motor 56.4 mm (2.22")

Connections
∙ Stepper motor 10-pole military connector

Weight
∙ P/N 30.43.100-60, P/N 30.43.105-60 2.5 kg (5.51 lbs)
∙ P/N 30.43.100-68, P/N 30.43.105-68 2.6 kg (5.73 lbs)
∙ P/N 30.43.100-60-HT, P/N 30.43.105-60-HT 2.6 kg (5.73 lbs)
∙ P/N 30.43.100-68-HT, P/N 30.43.105-68-HT 2.7 kg (5.95 lbs)

Mechanical Data
∙ Maximum rotation angle of the throttle 80°
∙ Chemical resistance Water, oil, gaseous fuels
∙ Absolute pressure 4.5 bar (65 psi)
∙ Maximum temperature of media flowing through +125 °C (+257 °F) (standard version)
+200 °C (+392 °F) (HT version)

Climatic Environmental Conditions


∙ Permissible temperature range –20 °C to +85 °C (–4 °F to +185 °F)
∙ Maximum relative humidity 95%

Characteristics of Stepper Motor


∙ Resolution 0,05625°
(in 1/16 microstep operation mode)
∙ Speed (when opening from 10% to 90%) 40 ms (VariStep3)
∙ Holding torque 1.7 Nm (1.25 lb-ft) (VariStep3)

P/N 01.33.009-100-EN | Rev. 04/2020


Overview Drawings
P/N 30.43.105-D and P/N 30.43.105-D-HT also correspond to the following drawings, but without the seal (O-ring, 82.14 mm x 3.53 mm [3.23" x 0.14"])
and the groove required for it.
P/N 30.43.100-D

P/N 30.43.100-D-HT

MOTORTECH GmbH | Hogrevestr. 21-23 | 29223 Celle | Germany | Phone: +49 5141 93 99 0 | Fax: +49 5141 93 99 99 | www.motortech.de
MOTORTECH Americas, LLC | 1400 Dealers Avenue, Suite A | New Orleans | USA | LA 70123 | Phone: +1 504 355 4212 | Fax: +1 504 355 4217 | www.motortechamericas.com P/N 01.33.009-100-EN | Rev. 04/2020

You might also like