DATA S H E E T
BENEFITS OF THE INFINERA
7090-15 CEM Packet 7090-15 CEM
Transport Platform ■■ Grow revenue by providing cost-
effective feature-rich Carrier Ethernet
services
Carrier Ethernet Services and Packet Transport
Simplified ■■ Improve network efficiency with
packet-based transport
MEF CE 2.0 CERTIFIED COMPACT 10G PACKET SOLUTION ■■ Upgrade existing networks to more
The Infinera 7090 CE Packet Transport Solutions offer a complete end-to-end cost-effective 10G packet solutions
portfolio for aggregation and switching. The 7090 CE Series provides Carrier Ethernet
■■ Increase network visibility with
technology supporting different types of products including the Infinera 7090-01 CE certified Carrier Ethernet OAM features
SFP-NID, Infinera 7090-05 CE Packet Transport Platform, Infinera 7090-07 CE Packet
Transport Platform, Infinera 7090-07 PoE CE Packet Transport Platform, and Infinera ■■ Future proof using 1G/10G and
100M/1G transceivers without forklift
7090-15 CE Packet Transport Platform.
upgrades
The Infinera 7090-15 CEM Packet Transport Platform is a Metro Ethernet Forum (MEF) ■■ Accelerate service activation with
Carrier Ethernet (CE) 2.0 certified interface device that provides demarcation and Zero Touch Provisioning
flexible aggregation options allowing customers to start with 1G services and grow
into 10G services. The 7090-15 CEM offers standards-based Service Operations,
Administration, and Maintenance (SOAM) features for the subscriber and the service
provider to measure Key Performance Metrics (KPIs) per the Service Level Agreement
(SLA).
The 7090-15 CEM is an integral component of the Infinera comprehensive end-to-end
transport portfolio and works seamlessly with the Infinera 7100 Packet Optical Transport
Solutions, the Infinera mTera Universal Transport Platform, the Infinera hiT 7300 Multi-
Haul Transport Platform, and the Infinera 8600/8800 Smart Router Series. All of these
platforms can be managed by the Infinera Transport Network Management System
(TNMS) and the Infinera 8000 Intelligent Network Manager (INM). The 7090-15 CEM
provides flexible and reliable transport solutions that meet a wide variety of service
needs from the access to metro/regional networks.
COST EFFECTIVELY ENABLE NEW CE SERVICES AND
EXTEND PACKET TRANSPORT NETWORKS
As a service demarcation device, the 7090-15 CEM provides service mapping and
traffic policing and shaping functions. Because it is MEF-certified, the 7090-15 CEM
supports best-in-class User-to-Network Interface (UNI) functions, including Class of
Service (CoS) prioritization and granular rate-limiting with 802.1ad Provider Bridge VLAN
stacking (Q-in-Q) for service multiplexing of multiple E-Line, E-LAN, E-Tree, and E-Access
services.
When functioning as a transport device, the 7090-15 CEM acts as a remotely managed
demarcation and aggregation device with carrier-class OAM capabilities. The solution
supports both passing data transparently without performing traffic management as
well as a robust set of traffic management and prioritization features. Thus, traffic
management functions can be performed by carrier equipment at the edge of the
service provider network.
The 7090-15 CEM conforms to the latest carrier-class Ethernet OAM standards: 802.1ah Link OAM and 802.1ag Service OAM. These OAM
features provide proactive detection of performance deterioration and rapid isolation of potential service problems to help ensure that
SLAs are met while keeping operational expenditures at a minimum for service providers.
Service providers are embracing a packet-based future. CE is the preferred transport technology to support business services and mobile
backhaul services and to replace legacy SONET/SDH technology. The 7090-15 CEM is an intelligent CE access and aggregation solution
that integrates seamlessly into any CE OAM landscape.
Key target applications include:
■■ High-density aggregation Ethernet services from access devices such as DSLAMs, GPON/EPON, and OLTs at the network edge
■■ Ethernet business services
■■ Wholesale access services
■■ Mobile backhaul services for small cell and 3G/4G
■■ Edge aggregation and switching applications in metro networks
TECHNICAL SPECIFICATIONS
Ethernet • Remote Defect Indication (RDI) Protection
• Interfaces • Link Trace • ITU-T G.8031 Ethernet Linear Protection
• 3 x 10 Gigabit Ports: 10GBASE-R SFP+; • Diagnostic loopback (Layer 2 ping) Switching
ports can be configured as 1 Gigabit • Y.1731 Alarm Indication Signal (AIS) • ITU-T G.8032v2 Ethernet Ring
with GE SFP • Sub 50 ms failover protection switching Protection Switching
• Up to 4 x 1 Gigabit Ports: 1000BASE- • IEEE 802.1AX/802.3ad LAG with LACP • Sub 50 ms failover for G.8031 and
X/100BASE-FX fiber SFP or G.8032v2
Traffic Management
10/100/1000BASE-T RJ45 copper • Active/Standby LACP LAG
• Service mapping to enable multiple
• All ports configurable as UNI or NNI • Static LAG without LACP
services per UNI
• SFP and SFP+ transceivers for standard • LACP A/A LAG
• IEEE 802.1Q VLAN tagging
CWDM, DWDM, and bidirectional • 802.1w - Rapid Spanning Tree
• 802.1ad Provider Bridge VLAN
wavelengths
stacking (Q-in-Q) Node Management and Security
• Port Mirroring
• Service multiplexing of up to 1024 • Flexible management tools:
• Supports 10,240 byte jumbo frames
Ethernet Virtual Connections • Command Line Interface (CLI)
Fault Management (EVCs) for E-line, E-LAN, E-Tree, and • Craft station GUI (Infinera 7191 Craft
• Supports a variety of link fault detection E-Access Services Station interface)
and fault propagation features • Layer 2 Control Protocol policy (L2CP) • Infinera Transport Network
• Link fault notifications management Management System (TNMS)
• Link/VLAN RDI (T-RDI and 802.1ag • Layer 2 Protocol Tunneling (L2PT) • Infinera 8000 Intelligent Network
RDI) • Traffic policing and shaping Manager (INM)
• Link fault propagation over port level • Granular rate limiting • Secure Shell (SSH)
service via automatic laser shut off • CIR/EIR and CS/EBS • Remote management
• 802.3ah Link OAM • Hierarchical Rate Limiting with two • In-band VLAN
• Link loopback level color aware policing • SNMP V1/V2c/V3
• Unidirectional link fault detection • Ingress and egress traffic management • Telnet
• Threshold-based monitoring and • CIR/EIR Color Aware “two rates, three • IP-less 802.3ah OAM extensions
notification colors” bandwidth profiles for ingress • Local management via serial console
• Dying gasp rate limiting with hierarchical policing port
• 802.1ag and Y.1731 end-to-end Service • CoS based on 802.1p QoS prioritization • Public (non-proprietary) 802.1ag CFM
OAM and CFM • CoS L1, L2, L3, L4 filtering SNMP MIBs
• Supports eight levels of Maintenance • L2CP CoS subtypes • Easy third-party SNMP management
domains and Maintenance End Points • IGMP Snooping per RFC 4541 software integration
(MEPs) • IPv4 or IPv6 for management access • Zero Touch Provisioning (DHCP/TFTP)
• 256 Maintenance Associations • Advanced Flow and CoS classification • DHCP Relay with Option 82
• 256 Maintenance Intermediate Points per Port, VLAN ID, PCP, IPv4/IPv6 (TOS/ • 802.1x, ACL, RADIUS, TACACS+
(MIPs) DiffServe) Priority, L2CP, MAC address, • Syslog
• Connectivity Check Messages (CCMs) IP address, or TCP Port • Link Layer Discovery Protocol (LLDP)
2 7090-15 CEM Packet Transport Platform
TECHNICAL SPECIFICATIONS
Performance Testing and Monitoring Synchronization Power Specifications
• Y.1731 Performance Monitoring • ITU-T G.8262 Synchronous Ethernet • 2.5 mm barrel connector: 12V DC
• Frame delay (one way and two way) • IEEE 1588v2 Boundary Clock, • 3-Pin terminal: +/-20 to 60V DC
• Frame loss Transparent Clock, Slave Clock • 100-240V AC (50 - 60Hz) with adapter
• Synthetic loss • Network Time Protocol (NTP) (included)
• Service availability • Dual power inputs
Physical and Environmental
• IETF RFC 2544 with built-in Test-head
• Dimensions: 41.4 x 185.17 x 232.41 mm / Regulatory and Standards Compliance
(Initiator/Responder)
1.63 x 7.29 x 9.15 in (H x W X D) • FCC Part 15, Class A
• ITU-T Y.1564 service activation tests
• Weight: 3.24 lb (1.47 kg) • UL 60950 1st Edition
(Initiator/Responder)
• Temperature and Humidity: • IEC 60950
• Third-party remote tester loopback
• Available for normal and extended • CSA C22.2 60950
support
operating temperature range • NEBS Level 3 Compliant
• TWAMP
environments • RoHS2
• Per-port and per-flow loopback with
• 0°C to 50°C • WEEE
MAC swap
• -40°C to 75°C • REACH
• Built-in UTP cable tester for
• Storage Temperature: -40°C to 80°C • MEF Carrier Ethernet 2.0 Certified
troubleshooting through to the
• Humidity: 5% to 95% (non-condensing) (E-LAN, E-Line, E-Access, and E-Tree)
customer equipment
© 2019 Infinera Corporation. All Rights Reserved. Infinera and logos that contain Infinera are trademarks or registered trademarks
of Infinera Corporation in the United States and other countries. All other trademarks are the property of their respective owners.
Statements herein may contain projections regarding future products, features, or technology and resulting commercial or technical
benefits, which are subject to risk and may or may not occur. This publication is subject to change without notice and does not
constitute legal obligation to deliver any material, code, or functionality and is not intended to modify or supplement any product
specifications or warranties. 0056-DS-RevA-0519
