Scribd
Upload
471 views1 page

Inspection Certificate To BS EN10204-3.1

Tachia Yung Ho Machine Industry Co. Ltd. has issued an inspection certificate for 50 pieces of 2-inch SCH 10S A403 WP316 tee fittings delivered to Q.J. Co. The certificate confirms the material composition, mechanical properties, and tests performed meet the customer's requirements and EN10204 3.1 standard. The heat treated steel fittings passed visual and non-destructive exams for size, surface quality, flattening, and intergranular corrosion with no issues found.

Uploaded by

Mohamed Raafat
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
471 views1 page

Inspection Certificate To BS EN10204-3.1

Tachia Yung Ho Machine Industry Co. Ltd. has issued an inspection certificate for 50 pieces of 2-inch SCH 10S A403 WP316 tee fittings delivered to Q.J. Co. The certificate confirms the material composition, mechanical properties, and tests performed meet the customer's requirements and EN10204 3.1 standard. The heat treated steel fittings passed visual and non-destructive exams for size, surface quality, flattening, and intergranular corrosion with no issues found.

Uploaded by

Mohamed Raafat
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

TACHIA YUNG HO No.

69, Yu-Shih Road, Dajia District,


MACHINE INDUSTRY CO., LTD. Taichung City 437, Taiwan
TEL: +886-4-26815496
FAX: +886-4-26815456　
Inspection Certificate to BS EN10204-3.1
MILL TEST CERTIFICATE

* Purchaser : Q. J . CO Purchase Order Number: ZWJ188 Certificate Number：ZZ18053


ITEM PRODUCT SPECIFITCAION MATERIAL UNIT QTY DELIVERY STATE STANDARD

JJ986677 TEE 2" SCH 10 S A403 WP316 PCS 50 Solution (1040°C) ASME B16.9

CHEMICAL COMPOSITION ( % ) MECHANICAL PROPERTIES

Heat No. C Si Mn S P Cr Ni Ti Mo V W Cu T.S (Mpa) Y.S (Mpa) E.L HARDNESS

S8587 0.03 0.4 1.2 0.010 0.023 17.2 13.1 / 2.5 / / / 591S 364 36 283

Flaring Hydrotest Flattening Intergranular Corrosion N.D.E Size （Measure) Surface (Visual)

/ / OK OK OK OK OK

We hereby certify that the material described has been manufacturered,sampled,tested and examinated in accordance with customer's
Remark
requirements and EN10204 3.1

CHIEF INSPECTOR: ZHENG XIAO JIAN


STAMP OF QUALITY DEPARTMENT
DATE : 23rd FEB 2021

You might also like