Scribd
Upload
74 views2 pages

Crayglue 22-10 Adhesive for HVAC

Crayglue 22-10 is a one-component, rubber-based adhesive formulated for bonding foams and metal substrates in pre-insulated duct systems. It has a yellowish color, viscosity of 600-900 cps, and 40-46% solid content. The adhesive dries with a green strength within 20 minutes, cures fully within 24 hours, and is resistant to temperatures from -20°C to +180°C. It features excellent adhesion properties and resistance to aging and chemicals. Crayglue 22-10 provides strong bonds for HVAC applications without using harmful solvents like methylene chloride.

Uploaded by

YASHICA VAITTIANATHAN
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
74 views2 pages

Crayglue 22-10 Adhesive for HVAC

Crayglue 22-10 is a one-component, rubber-based adhesive formulated for bonding foams and metal substrates in pre-insulated duct systems. It has a yellowish color, viscosity of 600-900 cps, and 40-46% solid content. The adhesive dries with a green strength within 20 minutes, cures fully within 24 hours, and is resistant to temperatures from -20°C to +180°C. It features excellent adhesion properties and resistance to aging and chemicals. Crayglue 22-10 provides strong bonds for HVAC applications without using harmful solvents like methylene chloride.

Uploaded by

YASHICA VAITTIANATHAN
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Crayglue Product Data Sheet

22-10

PRODUCT DESCRIPTION TECHNICAL SPECIFICATION


Crayglue 22-10 - is one component Rubber based
adhesive formulated with high green strength for bonding Base Synthetic Rubber
wide varieties of Foams and metal substrates in Pre-
Insulated Duct System. Color Yellowish
Viscosity, Cps @25ºC,
600 - 900
APPLICATION S 3, rpm 20
Solid Content, % 40 – 46
• Recommended for HVAC Application @110°C, 2 hr
• It can be use in wide varieties of foams and metal Density, kg/L 0.83 – 0.89
substrate.
Coverage, m2/L
• It doesn’t contain harmful solvents such as methylene 15
(0.1-0.2 mm wet film
chloride or urea formaldehyde. thickness)
• It can be applied easily by brush, roller and airless spray Flash Point, °C < 10
(please contact your equipment supplier followed by
product viscosity mention in data.) -20 to +180
Service Temp, °C
-20 to +95 (at high stress)
ADVANTAGES
Open Time, mins <20
• Excellent adhesion properties
• Good resistance to ageing Application Temp, °C >+15
• Resistance to high temp. up to 180oC
• High initial tack / green strength Complete Curing, Hr 24
• Chemical Resistant
• Bonds under high stress Flammability Flammable (wet product)
• No need to prime aluminum or galvanized metal

HEALTH & SAFETY


DIRECTIONS FOR USE As with all chemicals, caution should always be exercised.
Protective clothing such as gloves and goggles should be
The surface should be clean, dry, and free from oil, grease, worn.
and loose particle. Apply adhesive evenly with any suitable
equipment to a uniform coat on both surfaces. Allow to INHALATION: Inhalation of vapor or mist should be
evaporate the solvent completely and then assemble the avoided. If inhaled symptoms include coughing,
surface by applying normal hand pressure to give strong wheezing, laryngitis, and shortness of breath, headache,
bond. Keep container closed when not in use to prevent nausea, and vomiting. Immediately shift victim to fresh air,
solvent evaporation. and, if needed immediately start artificial respiration. Give
oxygen if breathing is labored. Get emergency medical
help.
STORAGE EYE CONTACT: Flush eyes with water for 15 minutes and
call for medical help.
• Store at temperatures between 15.6 to 35°C at well INGESTION: Causes nausea, vomiting, and loss of
ventilated area, Protect from direct sunlight. Avoid consciousness. If accidentally swallowed do not induce
storing container directly on the floor or against the vomiting rather call for medical help immediately.
wall. SKIN CONTACT: Flush with water or soap and water until
• Shelf life is up to 12 months in unopened container all traces have been removed. Seek medical attention if
when stored as directed. required.
WARRANTY
The information given is based on our knowledge and
performance of the material. Every precaution is taken in
the manufacture of the product and responsibility is limited
to the quality of supplies with no guarantee of results in the
field, as manufacturer has no control over site conditions or
execution of work.

You might also like