MATERIAL SAFETY DATA SHEET
CRAYGLUE 81-10
Date Prepared: Date Prepared: 26-September 2021 I Issue Date: Page 1 of 4
1. Identification of the Substance or Preparation and the Company:
Product Name: CRAY GLUE 81-10
Product Description / Use: one component Synthetic Rubber based Adhesive:
Company Identification:
FOCUS AIR CONDITIONING LLC
AL QUOZ,DUBAI
United Arab Emirates
Tel : 0434035516 / Fax 043405540
Emergency Telephone Number:
2. Composition / Data on Ingredients:
COMPONENTS CAS No. EINECS PERCENT PHRASES
R11-38-48/20-63-65-67
Toluene 108-88-3 203-625-9 40-60
S2-36/37-62
Synthetic Rubber 9003-55-8 20-30 S3-9-20
Petroleum Resin 64742-16-1 10-30 S3-15-16
R22-38-41-45
Dichloromethane 75-09-2 200-838-9 20-30
S1-3-7-9-15-16-23-24/25
R10-20/21-38
Xylene 108-38-3 203-576-3 2-10
S2-25
3. Hazards Identification:
Information pertaining to particular dangers for man and environment:
Extremely Flammable.
Can cause eye irritation.
Can cause skin irritation.
Moderate Respiratory tract irritant.
Harmful if swallowed.
Inhalation of vapors may cause loss of feeling and weakness in the hands and feet and loss of manual
dexterity. Inhalation of high concentrations may results in central nervous system effects such as dizziness,
weakness, fatigue, nausea, headache, and lack of coordination.
4. First Aid Measures:
Inhalation:
Move to fresh air. Restore breathing, if necessary. Call a physician if symptoms persist.
Skin contact:
Wash with soap and water. Remove contaminated clothing and launder. Get medical attention if irritation
develops or persists.
MATERIAL SAFETY DATA SHEET
CRAYGLUE 81-10
Date Prepared: Date Prepared: 26-September 2021 I Issue Date: Page 2 of 4
Eye contact:
Immediately flush eyes with plenty of water for at least 20 minutes retracting eyelids often. Tilt the head to
prevent chemical from transferring to the uncontaminated eye. Get immediate medical attention and monitor
the eye daily as advised by your physician.
Swallowing:
Do not induce vomiting and seek medical attention immediately. Drink two glasses of water or milk to dilute.
Do not give anything by mouth to an unconscious person. Induce vomiting as a last measure. Induced
vomiting may lead to aspiration of the material into the lungs potentially causing chemical pneumonitis that
may be fatal.
5. Fire Fighting Measures:
Media suitable for extinguishing:
Use water spray, foam, dry chemical or carbon dioxide.
Special exposure hazards arising from the substance or preparation itself, its combustion product,
or released gases:
In the event of fire the following can be released: Carbon Monoxide (CO) and Carbon Dioxide (CO 2).
Special protective equipment for firefighters:
Wear self-contained breathing apparatus and protective suit.
Further information:
In the event of fire, vapor are heavier that air and can travel to a source of ignition and flash back. Vapor
may form explosive mixture with air.
6. Accidental Release Measures:
Personal precautions:
Wear personal protective equipment; Ensure adequate ventilation.
Environment precautions:
Do not discharge into drains / surface water / groundwater.
Methods for cleaning up:
Soak up with inert absorbent material (e.g. sand, sawdust). Collect spilled materials in suitable containers
and dispose of according to Section 13.
7. Handling and Storage:
Handling:
Mildly irritating material. Avoid unnecessary exposure. Keep away from heat, sparks and flame. Wash
thoroughly after handling. Keep container closed.
Emptied container retains vapor and product residue. Observe precautions until container is cleaned.
Drum of this material should be grounded when pouring.
Do not cut or weld on or near this container.
Safe handling advise:
Avoid contact with skin and eyes.
MATERIAL SAFETY DATA SHEET
CRAYGLUE 81-10
Date Prepared: Date Prepared: 26-September 2021 I Issue Date: Page 3 of 4
Storage:
Store in a cool, dry, ventilated location. Keep away from heat, sparks, flame and other sources of ignition.
Keep container closed.
8. Controls / Personal Protection:
Occupational exposure controls:
Avoid contact with skin and eyes. Do not breathe vapors. Avoid repeated exposure. Wear suitable protective
equipment. Hold eye wash fountain available. Hold emergency shower available. Remove soiled or soaked
clothing immediately. Clean skin thoroughly after work.
At work do not eat, drink, smoke or take drugs. Keep away from food, drink and animal feeding stuffs. Keep
and wash working clothes separately.
Hand protection: Latex gloves.
Eye protection: Safety goggles.
Skin and body protection: Clothing as usual in the chemical industry.
9. Physical and Chemical Properties:
General Information:
Appearance : liquid
Color : Green/Yellowish/Amber Red
Odor : solvent
Important health safety and environmental information:
Flash Point : <10°C
Auto Ignition Temperature : not establish
Vapor Pressure : not establish
Vapor Density : not establish
Specific Gravity : 0.88 – 0.94
Viscosity : 3000 - 4500 Cps (Brookfield RVT-DVII: Spindle 3/20 rpm/25C)
Solid (%) : 24-28
Boiling Point (C) : not establish
Freezing/Melting Point (C) : not establish
Evaporation Rate : not establish
10. Stability and Reactivity:
Condition to avoid : stable under normal condition
Material to avoid : keep away from heat sources
Hazardous decomposition products: upon combustion Carbon Monoxide and Carbon Dioxide are
formed
11. Toxicological Information:
CHEMICAL NAME LD50/LC50
Toluene, (rat) Acute oral toxicity (LD50) : 5000 mg/kg
MATERIAL SAFETY DATA SHEET
CRAYGLUE 81-10
Date Prepared: Date Prepared: 26-September 2021 I Issue Date: Page 4 of 4
Acute toxicity of the gas (LC50) : 5320 mg/li (4hr)
Dichloromethane, (rat) LD50 : 1600 mg/kg
LC50 : 52000 mg/li (1hr)
Xylene, (rat) LD50 : 5000 mg/kg
12. Ecological Information:
Eco-toxicity: No data available.
Mobility: No data available
Persistence / Degradability: No data available.
Bio-accumulative potential: No data available.
Other adverse effects: No data available.
13. Disposal Considerations:
Product (Recommendation):
This product meets the definition of hazardous waste. It is ignitable waste class D001.
Disposal via incineration is recommended. Dispose of in manner consistent with federal and local
regulations.
Land Disposal restrictions : Toluene
Used packaging (Recommendation):
Wash empty packaging. They can be reuse after thorough and proper cleaning.
Cleaning agent (Recommendation):
Solvent
14. Transport Information:
Dangerous Goods Class : 3
Proper Shipping Name : Adhesive, containing flammable liquid
Packing Group : III
Hazchem Code : 3 [Y]
EPG No : 3C1
UN No. : 1133
15. Other Information:
Disclaimer of expressed and implied warranties:
The information in this MSDS is believed to be correct as of the date issued. Star Adhesives makes No
warranties, expressed or implied, including, but not limited to, any implied warranty of merchantability of
fitness for a particular purpose or course of performance or usage of trade. User is responsible for
determining whether the Star Adhesive product is fit for a particular purpose and suitable for user’s method
of use or application.
