Scribd
Upload
44 views2 pages

SGC - Commodities & HS Codes - AJCEPT VJEPA 2015 From April 2015

This document provides import tax rates for mother coils from various countries under different HS codes based on material type, thickness, width, and carbon content. It lists HS codes, duty percentages under most favored nation (MFN) rates as well as under various trade agreements with countries like VJ and AJ, and specifies reference specifications for different material types including HR, CR, EG, GI, GA, TP and others. The duty rates range from 0% to 20% and vary according to trade agreements and years from 2015 to 2019.

Uploaded by

Nguyen Thanh Phuong
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
44 views2 pages

SGC - Commodities & HS Codes - AJCEPT VJEPA 2015 From April 2015

This document provides import tax rates for mother coils from various countries under different HS codes based on material type, thickness, width, and carbon content. It lists HS codes, duty percentages under most favored nation (MFN) rates as well as under various trade agreements with countries like VJ and AJ, and specifies reference specifications for different material types including HR, CR, EG, GI, GA, TP and others. The duty rates range from 0% to 20% and vary according to trade agreements and years from 2015 to 2019.

Uploaded by

Nguyen Thanh Phuong
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 2

Import Mother Coils - Currently Used HS Codes - 2015

Updated 4/1/2015

VJEPA Import Tax Cir 25 (C/O VJ) dated AJEPA Import Tax Cir 24 (C/O AJ) dated
Mother coil HS Code Duty % MFN
14/2/2015 14/2/2015
Cabon
Material content From From From From From From From From
(%) Size (S), Width (W), 1/4/15 to 1/4/16 to 1/4/17 to 1/4/18 to 1/4/15 to 1/4/16 to 1/4/17 to 1/4/18 to
1/1/2015 1/1/2015
Thickness (T) 31/3/16 31/3/17 31/3/18 31/3/19 31/3/16 31/3/17 31/3/18 31/3/19
(%) (%) (%) (%) (%) (%) (%) (%)
T ≥ 4.75mm - Pickling Oil (PO) 72082500 0 x x x x x x x x
3mm ≤ T < 4.75mm (PO) 72082600 0 x x x x x x x x
2mm ≤ T < 3mm (PO) 72082790 0 x x x x x x x x
HR T < 2mm (PO) 72082710 0 x x x x x x x x
4.75mm ≤ T ≤ 8mm-Non oiled 72083700 0 x x x x x x x x
3mm ≤ T < 4.75mm 72083800 0 x x x x x x x x
T < 3mm 72083900 0 x x x x x x x x
REF. SPEC: SPHC, SPHT, SAPH440 …
T ≥ 3mm 72091500 7 x x x x x x x x
1mm < T < 3mm 72091600 7 x x x x x x x x
< 0.6% 0.5mm ≤ T ≤ 1mm 72091700 7 x x x x x x x x
CR T ≤ 0.17mm 72091891 7 x x x x x x x x
0.17mm to < T < 0.5mm 72091899 7 x x x x x x x x
400mm < W < 600mm 72112990 7 x x x x x x x x
<0.25%
W ≤ 400mm 72112920 7 x x x x x x x x
W ≤ 400mm 72119090 7 x x x x x x x x
REF. SPEC: SPCC, SPCEN, SPCF, SAE, SUYP
T ≤ 1.2mm 72103011 10 4 3 2 1 3 2 1 0
< 0.6% 1.2mm < T ≤ 1.5mm 72103012 5 5 5 5 5 x x x x
EG T > 1.5mm 72103019 5 5 5 5 5 x x x x
T ≤ 1.2mm 72103091 10 4 3 2 1 3 2 1 0
≥ 0.6%
T > 1.2mm 72103099 5 5 5 5 5 x x x x
REF. SPEC: SECD-TN, SECC-JD, SECC-JN, SECE-JN, JFE-CC-EZ-JN, SECC-GXK2, ECO-TE90
T ≤ 1.2mm 72104912 20 5 5 5 5 x x x x
GI < 0.6% 1.2mm < T ≤1.5mm 72104913 10 4 3 2 1 3 2 1 0
T > 1.5mm 72104919 10 4 3 2 1 3 2 1 0
NI-TOP T ≤ 1.2mm 72109090 5 0 0 0 0 0 0 0 0
REF. SPEC: SGCC, SGCD1, SGCD2, MSB-CC-ZC….NI-TOP.
Zinc-Fe galvanized by surface-
< 0.04% alloyed method, carbon content 72104911 0 0 0 0 0 0 0 0 0
< 0.04% of weight, T ≤ 1.2mm
GA
T ≤ 1.2mm 72104912 20 5 5 5 5 x x x x
≥0.04% 1.2mm < T ≤ 1.5mm 72104913 10 4 3 2 1 3 2 1 0
T > 1.5mm 72104919 10 4 3 2 1 3 2 1 0
REF. SPEC: SCGA270C, SCGA270D…..
T < 0.5mm 72101290 5 x x x x x x x x
<0.6%
T ≥ 0.5mm 72101190 5 1 0 0 0 3 2 1 0
TP
T < 0.5mm 72101210 5 x x x x x x x x
≥ 0.6%
T ≥ 0.5mm 72101110 5 1 0 0 0 3 2 1 0
REF. SPEC: SPTE
Others coated T ≤ 1.5mm & carbon < 0.6% 72109010 5 0 0 0 0 0 0 0 0
material T > 1.5mm or carbon > 0.6% 72109090 5 0 0 0 0 0 0 0 0

T ≤ 1.2mm 72106911 20 5 5 5 5 x x x x
Alluminized sheet <0.6% 1.2mm < T ≤ 1.5mm 72106912 10 10 10 10 10 x x x x
T > 1.5mm 72106919 10 10 10 10 10 x x x x
REF. SPEC: SA1D, MSA-B-DZCO, AL-COAT
T ≥ 4.75mm 72193100 0 4 3 2 1 10 10 10 10
3mm ≤ T < 4.75mm 72193200 0 4 3 2 1 10 10 10 10
SUS-Cold Rolled 1mm < T < 3mm 72193300 10 4 3 2 1 10 10 10 10
0.5mm ≤ T ≤ 1mm 72193400 10 4 3 2 1 10 10 10 10
T <0.5mm 72193500 10 4 3 2 1 10 10 10 10
REF. SPEC: SUS304, SUS430, SUS409L, …
T >10mm 72191100 0 4 3 2 1 10 10 10 10
4.75mm ≤ T ≤ 10mm 72191200 0 4 3 2 1 10 10 10 10
SUS-Hot Rolled
3mm ≤ T < 4.75mm 72191300 0 4 3 2 1 10 10 10 10
T <3mm 72191400 0 4 3 2 1 10 10 10 10
REF. SPEC: NSSC410DA

SI Silic (Si from 0.6% to <6%), if 72251900 0 4 3 2 1 10 10 10 10


Si not satisfied => CR = 7%
REF. SPEC: 50JN470, 50JN1000, 50SX470, 50SX1000, 50A800, 50A1000, 50SWH
EG (JFE-CC-EZ, SECC, ETC.) 72259190 0 2.5 2 1 1 10 10 10 10
Bo≥ 0.0008 GI, GA 72259290 0 2.5 2 1 1 10 10 10 10
Alloyed steel or HR 72253090 0 2.5 2 1 1 10 10 10 10
Titan ≥ 0.05 CR 72255090 0 2.5 2 1 1 10 10 10 10
ZAM (Super dyma - Alloyed) 72259990 0 2.5 2 1 1 10 10 10 10
Bo>= 0.0008 With BO>=0.0008% HS CODE: 98110000
Non-alloyed(A1100-H24,22,14) 76069100 0 1 1 0.5 0 3 3 3 0
AL
Alloyed (A5052-H32) 76069200 3 1 1 0.5 0 3 3 3 0
Purified Copper(refined) 74091100 3 0 0 0 0 0 0 0 0
Brass trip/
Alloy Copper- Zinc (brass) 74092100 0 0 0 0 0 0 0 0 0
Copper
Alloy Copper-Tin (bronze) 74093100 0 0 0 0 0 0 0 0 0
<0.6% Width ≥ 600mm & T ≤ 1.5mm 72107010 5 0 0 0 0 0 0 0 0
Width ≤ 400mm 72124010 0 2.5 0 5 5 5 4 2 0
Pre-Painted (PP)
<0.6% Carbon <0.6% & T ≤ 1.5mm 72124020 7 2.5 0 5 5 5 4 2 0
Width > 400mm & <600mm 72124090 7 2.5 0 5 5 5 4 2 0
REF. SPEC: PCM
AZ Thickness ≤1.2mm 72106111 20 x x x x x x x x
Al 55%- Zn <0.6% Thickness >1.2mm & ≤1.5mm 72106112 10 4 3 2 1 3 2 1 0
coated Thickness >1.5mm 72106119 10 4 3 2 1 3 2 1 0
REF. SPEC: AZ150, AZ90, AZ70
Import Mother Coils - Currently Used HS Codes - 2014
Updated 12/18/2013

VJEPA Import Tax Cir 21 AJEPA Import Tax Cir 20


Mother coil HS Code Duty % MFN
Cabon (COVJ) dated 15/2/2012 (COAJ) dated 15/2/2012
Material content From From From From From From
(%) Size (S), Width (W),
1/1/2014 1/1/2014 1/4/12 to 1/4/13 to 1/4/14 to 1/4/12 to 1/4/13 to 1/4/14 to
Thickness (T)
31/3/13 31/3/14 31/3/15 31/3/13 31/3/14 31/3/15
T ≥ 4.75mm - Pickling Oil (PO) 72082500 0 x x x x x x
3mm ≤ T < 4.75mm (PO) 72082600 0 x x x x x x
2mm ≤ T < 3mm (PO) 72082790 0 x x x x x x
HR T < 2mm (PO) 72082710 0 x x x x x x
4.75mm ≤ T ≤ 8mm-Non oiled 72083700 0 x x x x x x
3mm ≤ T < 4.75mm 72083800 0 x x x x x x
T < 3mm 72083900 0 x x x x x x
REF. SPEC: SPHC, SPHT, SAPH440 …
T ≥ 3mm 72091500 7 x x x x x x
1mm < T < 3mm 72091600 7 x x x x x x
< 0.6% 0.5mm ≤ T ≤ 1mm 72091700 7 x x x x x x
CR T ≤ 0.17mm 72091891 7 x x x x x x
0.17mm to < T < 0.5mm 72091899 7 x x x x x x
400mm < W < 600mm 72112990 7 x x x x x x
<0.25%
W ≤ 400mm 72112920 7 x x x x x x
REF. SPEC: SPCC, SPCEN, SPCF, SAE, SUYP
T ≤ 1.2mm 72103011 10 5 5 4.5 5 5 4
< 0.6% 1.2mm < T ≤ 1.5mm 72103012 5 5 5 4.5 5 5 4
EG T > 1.5mm 72103019 5 5 5 4.5 5 5 4
T ≤ 1.2mm 72103091 10 5 5 4.5 5 5 4
≥ 0.6%
T > 1.2mm 72103099 5 5 5 4.5 5 5 4
REF. SPEC: SECD-TN, SECC-JD, SECC-JN, SECE-JN, JFE-CC-EZ-JN, SECC-GXK2, ECO-TE90
T ≤ 1.2mm 72104912 20 0 0 0 0 0 0
GI < 0.6% 1.2mm < T ≤1.5mm 72104913 10 6 5.5 4.5 5 5 4
T > 1.5mm 72104919 10 6 5.5 4.5 5 5 4
NI-TOP T ≤ 1.2mm 72109090 5 0 0 0 0 0 0
REF. SPEC: SGCC, SGCD1, SGCD2, MSB-CC-ZC….NI-TOP.
Zinc-Fe galvanized by surface-
< 0.04% alloyed method, carbon content 72104911 0 0 0 0 0 0 0
< 0.04% of weight, T ≤ 1.2mm
GA
T ≤ 1.2mm 72104912 20 0 0 0 0 0 0
≥0.04% 1.2mm < T ≤ 1.5mm 72104913 10 6 5.5 4.5 5 5 4
T > 1.5mm 72104919 10 6 5.5 4.5 5 5 4
REF. SPEC: SCGA270C, SCGA270D…..
T < 0.5mm 72101290 5 x x x x x x
<0.6%
T ≥ 0.5mm 72101190 5 x x x x x x
TP
T < 0.5mm 72101210 5 5 4 2.5 5 5 4
≥ 0.6%
T ≥ 0.5mm 72101110 5 5 4 2.5 5 5 4
REF. SPEC: SPTE
Others coated T ≤ 1.5mm & carbon < 0.6% 72109010 5 0 0 0 0 0 0
material T > 1.5mm or carbon > 0.6% 72109090 5 0 0 0 0 0 0
REF. SPEC: ZAM
T ≤ 1.2mm 72106911 20 10 10 10 x x x
Alluminized sheet <0.6% 1.2mm < T ≤ 1.5mm 72106912 10 10 10 10 x x x
T > 1.5mm 72106919 10 10 10 10 5 5 4
REF. SPEC: SA1D, MSA-B-DZCO
T ≥ 4.75mm 72193100 0 6 5.5 4.5 10 10 10
3mm ≤ T < 4.75mm 72193200 0 6 5.5 4.5 10 10 10
SUS-Cold Rolled 1mm < T < 3mm 72193300 10 6 5.5 4.5 10 10 10
0.5mm ≤ T ≤ 1mm 72193400 10 6 5.5 4.5 10 10 10
T <0.5mm 72193500 10 6 5.5 4.5 10 10 10
REF. SPEC: SUS304, SUS430, SUS409L, …
T >10mm 72191100 0 6 5.5 4.5 10 10 10
4.75mm ≤ T ≤ 10mm 72191200 0 6 5.5 4.5 10 10 10
SUS-Hot Rolled
3mm ≤ T < 4.75mm 72191300 0 6 5.5 4.5 10 10 10
T <3mm 72191400 0 6 5.5 4.5 10 10 10
REF. SPEC: NSSC410DA

SI Silic (Si from 0.6% to <6%), if 72251900 0 6 5.5 4.5 10 10 10


Si not satisfied => CR = 7%
REF. SPEC: 50JN470, 50JN1000, 50SX470, 50SX1000, 50A800, 50A1000
EG (JFE-CC-EZ-JN, SECC-JN, 72259190 0 4.5 4 3 10 10 10
Bo≥ 0.0008 GI, GA 72259290 0 4.5 4 3 10 10 10
Alloyed steel
or HR 72253090 0 4.5 4 3 10 10 10
Titan ≥ 0.05 CR 72255090 0 4.5 4 3 10 10 10
(+ Circular. No. ZAM (Super dyma - Alloyed) 72259990 0 4.5 4 3 10 10 10
164/TT-BTC) Bo>= 0.0008 With BO>=0.0008% HS CODE: 98110000
Non-alloyed(A1100-H24,22,14) 76069100 0 2 2 1 3 3 3
AL
Alloyed (A5052-H32) 76069200 3 2 2 1 3 3 3
Purified Copper(refined) 74091100 3 0 0 0 0 0 0
Brass trip/
Alloy Copper- Zinc (brass) 74092100 0 0 0 0 0 0 0
Copper
Alloy Copper-Tin (bronze) 74093100 0 0 0 0 0 0 0
<0.6% Width ≥ 600mm & T ≤ 1.5mm 72107010 5 0 0 0 0 0 0
Width ≤ 400mm 72124010 7 0 0 0 0 0 0
Pre-Painted (PP)
<0.6% Carbon <0.6% & T ≤ 1.5mm 72124020 7 0 0 0 0 0 0
Width > 400mm & <600mm 72124090 7 0 0 0 0 0 0
REF. SPEC: PCM
AZ Thickness ≤1.2mm 72106111 20 6 5.5 4.5 5 5 4
Al 55%- Zn <0.6% Thickness >1.2mm & ≤1.5mm 72106112 10 6 5.5 4.5 5 5 4
coated Thickness >1.5mm 72106119 10 6 5.5 4.5 5 5 4
REF. SPEC: AZ150, AZ90, AZ70

You might also like