11/11/2017 Pre-Packaged Brazing Filler Metals & Alloys | Lucas-Milhaupt

Brazing & Soldering Products

Lucas-Milhaupt offers the most comprehensive inventory of alloys and forms in the industry and our expertise in brazing and soldering
ensures that we can find the best-matched products for your needs.

Distribution Pre-packaged Filler Metals & Fluxes

Lucas Milhaupt carries pre-packaged brazing filler metals, fluxes, and solders, including SIL-FOS®. SIL-FOS®, the original
copper/phosphorous brazing alloy, was developed and patented by Handy & Harman in 1931.

Available either in bulk or pre-packaged lots are filler metals for brazing copper-based alloys (SIL-FOS®), steels, stainless, etc.
(SILVALOY® and EASY-FLO® Alloys), as well as low temperature, lead-bearing (SOLDERITE™) and no-lead solders
(SILVABRITE®).

Download a PDF version listing of catalog pre-packaged parts

Product Solidus Liquidus Nominal Composition, % AWS & Technical SDS Safety
International Documents* Documents
°F °C °F °C Ag Cu P Sn Zn Other Standards

50/50 (SOLDERITE™ 50/50) 361 183 414 212 50 50 Pb 35 kb 148 kb

Standard general purpose Tin/Lead
solder for moderate joint
clearances. Available as Solid, Acid
or Rosin core.

95/5 452 233 464 240 95 5 Sb 43 kb 146 kb

(Formally CLEAN 'N BRITE™
95/5) General purpose
Tim/Antimony solder.

AL 802 - Flux cored HANDY 710 377 725 385 98 2 Al 73 kb 118 kb

ONE®
Solder for joining aluminum and
aluminum alloy. Alloy is cored
with a non-corrosive flux.

AL 822 - Flux cored HANDY 800 426 900 482 78 22 Al 47 kb 118 kb

ONE®
https://www.lucasmilhaupt.com/en-US/products/prepackaged/7/ 1/6
11/11/2017 Pre-Packaged Brazing Filler Metals & Alloys | Lucas-Milhaupt
High strength, low temperature
braze for joining aluminum to
aluminum and aluminum to copper.
Easy to use, contains a non-
corrosive flux.

EASY-FLO® 45 1125 605 1145 620 45 15 16 24 Cd BAg-1 59 kb 127 kb

(Formally SILVALOY® 45)
Versatile alloy, used for most
ferrous and non-ferrous metals.
Contains Cadmium, therfore
exercise extreme caution as
Cadmium fumes are toxic.

FOS-FLO® 1310 710 1460 793 92.8 7.2 BCuP-2 38 kb 40 kb

(1350) (730)
(Formally FOS-FLO® 7 /
SILVALOY® 0) An economical,
very fluid medium temperature
filler metal for use with copper,
brass and bronze. Withstands
moderate vibration. Fast Flow.

HANDY FLO® (formally SIL- 1190 645 1460 795 6 88 6 181 kb 107 kb
FOS® 6M) (1300) (705)
Recommended for use where a
close fit-up cannot be maintained.
Has the ability to fill gaps and form
fillets without affecting joint
strength. Slow Flow.

SIL-FOS® 15 1190 643 1475 802 15 80 5 BCuP-5 78 kb 107 kb

(1300) (705)
(Formally SILVALOY® 15) Best
alloy for general copper-copper
brazing in the SIL-FOS® family.
For copper-to-copper joints the
phosphorus in the SIL-FOS®
product serves as the fluxing agent
and no separate flux is necessary.
For brass applications however,
flux is recommended. For use
where close fit-ups cannot be
maintained SIL-FOS® 15 works
well to bridge gaps. Highest joint
ductility of the entire SIL-FOS®
family to best withstand the
stresses inherent in refrigeration.
Slow Flow.

SIL-FOS® 2 1190 645 1450 788 2 91 7 BCuP-6 38 kb 107 kb

(1325) (718)
(Formally SILVALOY® 2) A filler
metal with comparable

https://www.lucasmilhaupt.com/en-US/products/prepackaged/7/ 2/6
11/11/2017 Pre-Packaged Brazing Filler Metals & Alloys | Lucas-Milhaupt
characteristics to FOS-FLO® .
Medium Flow.

SIL-FOS® 5 1190 645 1495 815 5 89 6 BCuP-3 78 kb 107 kb

(1325) (720)
(Formally SILVALOY® 5)
Designed primarily for those
applications where close fit-ups
cannot be maintained. It has the
ability to fill gaps and form fillets
without adversely affecting joint
strength. Slow Flow.

SIL-FOS® 6 1190 645 1325 720 6 86.8 7.2 BCuP-4 39 kb 107 kb

(1275) (690)
(Formally SILVALOY® 6F) A
very fluid filler metal for close fit-
up work. Low melting range makes
it ideal where temperature is a
factor. Fast Flow.

SIL-FOS® 6i 1190 643 1425 775 6 87.5 6.5 38 kb 107 kb

(1300) (705)
(Formally SILVALOY® 6) A fluid
filler metal that offers intermediate
flow characteristics. An acceptable
alternative to SIL-FOS® 15 where
vibration and thermal cycling
stresses are not severe.

SILVABRITE 100® 440 225 660 350 0.4 4 95.6 43 kb 34 kb

(Formally CLEAN 'N BRITE™ -
No Lead) Silver-bearing solder
with good strength used in potable
water system applications requiring
no lead.

SILVABRITE® 430 221 430 221 4 96 38 kb 105 kb

(Formally CLEAN 'N BRITE™)
Lead-free, silver-bearing high-
strength solder used for
applications requiring close joint
clearnces.

SILVABRITE® 973 440 225 572 300 3 97 241 kb 32 kb

A safe and effective lead free
solder for drinking water systems
and other applications where an
environmentally friendly product is
preferred.

https://www.lucasmilhaupt.com/en-US/products/prepackaged/7/ 3/6
11/11/2017 Pre-Packaged Brazing Filler Metals & Alloys | Lucas-Milhaupt

SILVABRITE® S 430 221 473 245 5 95 38 kb 111 kb

SILVABRITE S which contains 5%
Ag as compared with 4% in
SILVABRITE is ideally suited to
applications where the added silver
produces a plastic range during
melting.

SILVALOY® 380 1200 648 1330 720 38 32 2 28 BAg-34 38 kb 96 kb

(Formally BRAZE™ 380 /
SILVALOY® A38T) Economical
general purpose brazing alloy for
joining both ferrous and nonferrous
base metals. Free flowing.

SILVALOY® 401 1245 675 1340 725 40 30 30 37 kb 87 kb

(Formally BRAZE™ 401 /
SILVALOY® A40) A more
economical filler metal with a
fairly narrow melt range, this alloy
has application for both steel and
copper-based applications.

SILVALOY® 450 1225 665 1370 745 45 30 25 BAg-5 36 kb 87 kb

(Formally BRAZE™ 450 /
SILVALOY® A45) General
purpose filler metal for joining
ferrous, non-ferrous and dissimiliar
metals with large joint clearances.

SILVALOY® 452 1195 646 1251 677 45 27 3 25 BAg-36 433 kb 85 kb

(Formally BRAZE™ 452 /
SILVALOY® A45T) Low
temperature, general-purpose alloy
with better flow properties than
SILVALOY® 450.

SILVALOY® 505 1220 660 1305 705 50 20 28 2 Ni BAg-24 41 kb 125 kb

(Formally BRAZE™ 505 /
SILVALOY® A50N) Best general
purpose filler metal available.
Recommended for stainless steel as
it retards interface corrosion.
Nickel content provides superior
adhesion to base metal surfaces.

SILVALOY® 560 1145 620 1205 650 56 22 5 17 BAg-7 37 kb 96 kb

https://www.lucasmilhaupt.com/en-US/products/prepackaged/7/ 4/6
11/11/2017 Pre-Packaged Brazing Filler Metals & Alloys | Lucas-Milhaupt
(Formally BRAZE™ 560 /
SILVALOY® A56T) Lowest
temperature, Cadmium-free filler
metal, very fluid alloy flow.

Login Failed, Please Try Again

Login Successful
Email:
Password: Forgot Your Password?

Recover Your Password

Email not found, please try again.
Success, check your email.
Email:

Registration Failed.
Success, you are now logged in.
Fields marked with (*) are required.
First Name: *

Last Name: *

Email: *

Password: *

Repeat Password: *

Company Name: *

Title: *

Address: *

City: *

Country: United States of America *

https://www.lucasmilhaupt.com/en-US/products/prepackaged/7/ 5/6
11/11/2017 Pre-Packaged Brazing Filler Metals & Alloys | Lucas-Milhaupt

State/Province: None *

Postal/ZIP Code: *

Telephone: *

Please send me information about Lucas-Milhaupt products and services

Please type the letters below: *

Note: The SIL-FOS® and FOS-FLO® filler metals are for use with copper and copper alloy base metals. Do not use these materials to
join ferrous materials as brittle phosphide compounds will be formed at the interface. The SIL-FOS® and FOS-FLO® filler metals
have a unique characteristic called the "Flow Point" (listed in parentheses). The "Flow Point" is defined as the temperature at which
the filler metal is fluid enough to capillary through a joint even though not completely liquid (i.e. above the liquidus temperature).

https://www.lucasmilhaupt.com/en-US/products/prepackaged/7/ 6/6