USER’S MANUAL

USER’S
MANUAL

Industrial Monitor Converter

(CGA/EGA/RGB to VGA)

Model: GBS-8219

GONBES Technology Co.,Ltd

Apr 2010

User’s Manual -0-

 USER’S MANUAL

Copyright Notice and Disclaimer

All rights reserved. No parts of this manual may be reproduced in any form without the express
written permission of GONBES Technology Co., Ltd(GONBES) makes no representations or
warranties with respect to the contents hereof. In addition, information contained herein are subject
to change without notice. Every precaution has been taken in the preparation of this manual.
Nevertheless,GONBES assumes no responsibility for errors or omissions or any damages resulting
from the use of the information contained in this publication.

Gonbes is a trademark of GONBES Technology Co., Ltd.

All other trademarks belong to their respective owners.

1. Important Info

Before start this product, please read the User’s Manual carefully, it contains all product-related warnings and
important issues.

Do not try the followings:

- unauthorized repairs or parts replacement or other operations
- inappropriate placement including but not limited to lightning, fire, exposure to rain, water, gas

- switch to the power not in the voltage allowable range

- remove the modified label or the warranty label

Cautions:

WARNING

WIZARD GAME
DO NOT UNCOVER

To avoid electric shock, do not uncover the metal case,

unauthorized repairs or parts replacement or other
operations are prohibited. Please return to factory for
repair.

User’s Manual -1-

 USER’S MANUAL
2. Features
GONBES Technology Co. , Ltd (GONBES) in the industrial equipment under long-term maintenance
and reconstruction of the monitors& display systems on the lessons learned to gather requirements and
feedback of many customers, after many years of development and testing, based on the strength in GBS
8218 launch of innovative industrial monitor converter - GBS 8219, it achieved Industrial video
signal(RGB/CGA/VGA to VGA) conversion fully automated operation, will give you the maintenance and
replacement of industrial display to bring about affordable price and convenient.

- Feature specifications

Signals MDA、CGA、EGA、RGB、RGB Sog、RGBS、RGBHV、YPbPr

Input
Interface 9pin、3pin、6pin、14pin、20pin、25pin

Horizontal 12kHz to 40kHz

Frequency automatically recognized
Rate(H)
Supports 15pin VGA，Resolution:800*600/60HZ
Output or custom-resolution

Interface D-Sub 15 PIN standard VGA port

Power DC 12V 1.0A

Note:
1.YPbPr = YUV
2.Input Horizontal Frequency Rate 12kHz to 40kHz automatically recognized.
3.Support RGB and YPbPr
4.Support Interlaced Scanning and Line by Line Scanning.
5.Support Vertical Resolution from line200 to line 600 automatically recognized.
6.Support variable Horizontal Resolution automatically recognized。
7.Support RGBHV (separate sync) ,RGBS (composite sync), automatically recognized
8.Output resolution: 800*600/60Hz standard VGA or custom-resolution.

User’s Manual -2-

 USER’S MANUAL
3. Interface Specification

Item Spec. Remarks

①V To connect V interface of the input device

② H/CS To connect H(CS) interface of the input device

③ R/Pr Red signal input/ Pr signal input Input Channel Ⅰ

④ G/Y Green signal input/ YPBPR -Y signal input

⑤ B/Pb Blue Signal input/YPBPR -Pb signal input

⑥ RUN Running Status Indicator

⑦ VIDEO in To connect 9-pin interface of the input device Input Channel Ⅱ

⑧ VGA out Standard sub-15p VGA female interface VGA Output

⑨ MENU Use to adjust screen /programming

⑩ DC12 Power input DC12V, 1A

Note: Input Channel Ⅰ, Input Channel , you can choose one of them

4. Definition for I/O interface

Table 4.1 Definition for Input Channel :

PIN Input Signal

p1(GND) Connect to the ground

p2(GND) Connect to the ground

P3(R) connect R(ed) interface of the input device

P4(G) connect G(reen) interface of the input device

P5(B) connect B(lue) interface of the input device

P6 Undefined(null)

P7 Undefined(null)

P8(H) connect H(CS) interface of the input device Figure 4.1 Definition for Input Channel

P9(V) connect V interface of the input device

User’s Manual -3-

 USER’S MANUAL
Table 4.2 Definition for Input Channel Ⅰ

BNC Input Signal Connection image

Pb、Y、Pr YPbPr input signal (right image)
Interface: three BNC slot, connected
to the corresponding Pb, Y, Pr
interface, then Y monochrome port.

Figure 4.2 Analog 3BNC (YPBPR) Input.

R、G、B RGB Sog input signal (right image)

Interface: three BNC slot, connected
to the corresponding R, G, B slot,
then G monochrome port.

Figure 4.3 Analog 3BNC (RGB Sog) Input.

R、G、B、S RGBS CS Composite Sync (right

image)
Interfaces: 4 BNC slot, connected to
the corresponding R, G, B, S I,
monochrome then G, S I

Figure 4.4 Analog 4BNC (RGBS CS) Input.

R、G、B、H、V RGBHV separate sync (right image)

Interface: 5 BNC port, connected to
the corresponding R, G, B, H, V I,
monochrome then G, H, V I

Figure 4.5 Analog 5BNC (RGBHV) Input.

5. Operation Menu

Item Spec.
①MENU -press it to enter into OSD menu
-click it once to select and click
again to exit the current line

② “+” -click it to move the cursor up

-click it to add the value

③ “-“ -click it to move the cursor down

-click it to deduct the value

User’s Manual -4-

 USER’S MANUAL
6. Accessories& Details
Table 6.1 Accessories list

Item QTY Remarks

User’s Manual 1 English

Power Adaptor 1 DC12V,1A

half 9pin cable 1

9pin M-F cable 2 1 Male + 1 Female

Table 6.2 Details of half 9Pin cable

Name Wire color Signal

A Silver web Shield

B Black wire Ground(GND)

C White wire Vertical Frequency Rate(V)

D Orange wire Horizontal Frequency Rate(H)

E Blue wire Blue(B)

F Green wire Green(G)

G Red wire Red(R)

Figure 6.2 Half 9pin cable
H Brown wire Undefined(null)

7. Assembly and debugging

Step 1: access signals, if not display or display color is not correct, adjust the video source type items, adjusted to
the input video signal with the same type, color, only the normal display. (Available options are: YUV color, RGB
(D) digital TTL signals, RGB (A) mode may signal)

Step 2:The system can automatically identify the signal. If you adjust the first step, the image color display is no
need to manually adjust the normal; if there distortions in the image, you need to manually adjust the
synchronization signal and the signal source to adjust to the same types of synchronization, you can normally
display.

Step 3: If the screen shows elongated, and the overflow to the bottom of the screen, put the adjusted scanning:
Progressive Scan (Progressive); if the adjustment of the vertical position to a maximum, the image display is still
only half of the display, put the adjust the scanning mode: interlaced scan (Interlaced).

Step 4: Adjust the horizontal position, horizontal size, vertical position, vertical size of the items, adjusted to the
satisfaction of the location.

Step 5: input impedance, select the input source impedance than with select 750 in Europe, relatively light, if you
choose all 750 European white side, you should choose for the 75 euro.

Step 6: the phase adjustment, if the image appears small waves up and down type jitter, can adjust the
consistency with the input signal phase.

Step 7: Save and Exit: Save all the parameters and exit the menu.

User’s Manual -5-