Honeywell
R4126 and R4127lR7255B
R4140IR7249A
R4150IR7259A
R4795lR7290
-Flame Safeguard Primary Controls/
C7027A, C7035A, C7044A Amplifiers
R4075C,D,E/R7249A
MINIPEEPER ULTRAVIOLET R4136C,D/R7249A
dA690G Protectorelay Primary Control
FLAME DETECTOR -R7023C Flame Detector Relay.
l The C7044A is also used with the following 50’ Hz Flame
Safeguard Controls/ Amplifiers:
R434l /R7323
R4343lR7323
R4344IR7323
l The C7027A mounts on a 1 I2 in. sighting pipe by means of an
integral collar.
l The C7035A mounts on a 1 in. sighting pipe by means of an
integral collar. A shield protects the sensing tube.
l The C7035A meets outdoor raintight requirements of Under-
writers Laboratories Inc., NEMA 3, and NEMA 4.
l The C7044A mounts with a simple, l-screw bracket. Sensing
tube enclosed in stainless steel housing.
l The C7044A is suitable for side or end viewing.
THE C7027A, C7035A, AND C7044A DETECT ULTRAVIOLET l Compact size makes the C7027A and C7044A particularly
RADIATION EMITTED FROM ALL FLAMES. THEY ARE USED useful for blast tube mounting.
WITH FLAME SAFEGUARD CONTROLS TO PROVIDE SUPER-
l Properly installed, the C7027A and C7035A are sealed
VISION FOR GAS, OIL, OR COMBINATION GAS-OIL
against pressures as high as 5 psi 134.5 kPa].
BURNERS.
l The C7035A ultraviolet sensing tube is field replaceable. The
q C7027A 0 C7035A 0 C7044A
C7027A and C7044A sensing tubes are not field replaceable-
l The C7027A, C7035A, and C7044A are used with the use on an economical, throwaway basis.
following:
-Flame Safeguard Programmers/ l Two Minipeeper detectors can be wired in parallel for difficult
Amplifiers sighting applications.
I SPEClFlCATlOhiS I
STANDARD MODELS C7035A MINIPEEPER ULTRAVIOLET FLAME DETECTOR
DETECTION: Detects ultraviolet radiation only.
C7027A MINIPEEPER ULTRAVIOLET FLAME DETECTOR AMBIENT OPERATING TEMPERATURE RATINGS: 0 F to 250 F
DETECTION: Detects ultraviolet radiation only. [-18 C to +121 C], or -40 F to +250 F [-40 C to +121 Cl, depending
AMBIENT OPERATING TEMPERATURE RATINGS: 0 F to +215 F on the model.
[-18 C to +102 C], or -40 F to +215 F r-40 C to +102 C], depending
MAXIMUM PRESSURE RATING: 5 psi [34.5 kPa].
on the model.
MOUNTING: Collarwith standard 1 in. internal threadsfor mounting
MAXIMUM PRESSURE RATING: 5 psi [34.5 kPa].
on a 1 in. sighting pipe. (The DIN approved C7035A1064 has l-1 1
MOUNTING: Collar with standard l/2 in. internal threads for
BSRPl threads.)
mounting on a l/2 in. sighting pipe.
WIRING CONNECTIONS: Two, 6 ftt1.83 m], color-coded, NEC Class
WIRING CONNECTIONS: Two, 6 ft [1.83 m], color-coded, NEC Class
1 leadwires. (One model is available with leadwires rated for
1 leadwires. (One model is available with 24 ft [7.32 m] leadwires.)
400 F [204.4 C], and one model is available with 12 ft
Rear of detector has a clamp type connector for l/2 in. flexible
[3.66 m] leadwires.) Rear of detector has 112-14 NPSM internal
metallic conduit. (Models are available with l/2 in. internally
threads for connecting to a conduit. (The DIN approved
threaded spud connector instead of the clamp.)
C7035A1064 has l/2-14 BSP-F threads.)
DIMENSIONS: See Fig. 1.
DIMENSIONS: See Fig. 2.
REPLACEMENT PART: 129685 Flange Gasket NOTE: The UV
WEIGHT: 6 oz [0.17 kg].
sensing tube is not field replaceable.
REPLACEMENT PARTS:
129808 Flange Gasket.
129464M Ultraviolet Sensing Tube, 0 F to250 F I-18 C to+121 C].
129464N Ultraviolet Sensing Tube, -40 F to +250 F [-40 C to
+121 C].
C7027A AND C7035A
APPROVALS:
UNDERWRITERS LABORATORIES INC. LISTED: File No.
MP268; Guide No. MCCZ.
CANADIAN STANDARDS ASSOCIATION CERTIFIED: File No.
LR1620; Guide No. 140-A-2.
FACTORY MUTUAL APPROVED.
FIG. I- INSTALLATION DIMENSIONS OF THE C7027A, IN in. [mm DIN APPROVED MODELS: C7027A1056, C7035A1049, and
IN BRACKETS]. C7035A1064.
D.A. Form Number 65-0062
12-66e cHoneywell Inc. 1986
AMBIENT OPERATING TEMPERATURE RATINGS: 0 F to 215 F [-I8
c to +102 C].
MOUNTING: Bracket (included in 4074 BVK Bag Assembly), se-
cured by two 8-32 RHIS (European M-4) screws (not included).
WIRING CONNECTIONS: Two, 6 ft [1.83 ml, color-coded, NEC Class
1 leadwires. Rear of detector has a clamp type connector for l/2
inch flexible metallic conduit.
DIMENSIONS: See Fig. 3.
WEIGHT: 10 oz to.28 kg].
TABLE I-FLAME SIGNAL
I PLUG-IN I I MINIMUM I
FLAME ACCEPTABLE MAXIMUM
SIGNAL FLAME STEADY CURRENT
FLAME AMPLIFIER SAFEGUARD CURRENT EXPECTED
DETECTOR Ipsrplsl CONTROL(S) lmicroampl (microamp)
C7027A R7249A R4075C,D,E; 3-112 7-l 12
C7035A, or R4139C,D;
FIG. 2- INSTALLATTON DIMENSIONS OFTHEC7035A, IN in. [mm C7944A R4149
IN BRACKETS].
R7255B IT4128 R4127 4 a
1 R7259A i R4150 1 4 I a
C7044A MINIPEEPER ULTRAVIOLET FLAME DETECTOR 1 R7299A 1 R4795A.D 1 l-112 I 2-114
DETECTION: Detects ultraviolet radiation only. Housing has 2
openings to permit viewing from either its end or its side. Side None RA999G, l-1/2 2-l/4
viewing is 1 / 8 as sensitive as end viewing. R7023C
6 FOOT 11.83 METREJ
LEADWIRES (21
FIG. 3-INSTALLATION DIMENSIONS OF THE C7044A, IN in. [mm IN BRACKETS].
PRINTED IN U.S.A.
