8" SP - MSP VESSEL ORDER FORM
Customer: _______________ PO#: _____________ Line Item #:___________ Quantity: 2
Please note that all options will increase the vessel price - NOTE: Missing order information will delay your order
MODEL: PRO 8 - 300 - SP CUSTOMER #: _________________________
LOCKING TYPE (Choose one): ✘ PRO (Retaining Ring w/ finger pull) BPV (locking segments, 1000/1200 PSI only)
CODE: MODEL PRO/BPV 8-A-( SP - MSP )-B (Choose SP or MSP based on maximum desired side port size)
A (Pressure) 300 600
✘ 450 1000 1200
B (Length) -1 -1.5 -2 -3 ✘ -4 -5 -6 -7 -7.5 -8
Notes: B (Length) : 40" Membrane: -1, -2, -3, -4, -5, -6, -7, -8
60" Membrane: -1.5, -3, -6, -7.5
FEED/CONCENTRATE PORT CONFIGURATIONS: (see drawing for details)
SP: ✘ Standard - P1 port to port span Option - P2 port to port span Option - P3 port to port span
MSP:
Standard - P3 port to port span Option - P1 port to port span (for 300 and 450 PSI ONLY)
Fill out the feed/concentrate port requirements in the space below. List the port location first, followed by the port size code for each port.
Serial Number end 1 K 5 K
Opposite end 3 K 7 K
Port location (see diagram)
Port Size Code
Port Size Code: SP MSP
D = 1-1/2" IPS Grooved end P = 1-1/2" IPS Grooved end
E = 2" IPS Grooved end H = 2" IPS Grooved end
NOTE: 3" and 4"
¹
F = 2-1/2" IPS Grooved end J = 2-1/2" IPS Grooved end
ports are not
allowed 90° from
U = 1-1/2" Sanitary K = 3"¹ IPS Grooved end
another port S = 2" Sanitary L = 4"¹ IPS Grooved end
Z = 1-1/2" Sanitary
EXTERIOR FINISH: Y = 2" Sanitary
✘ Standard - White high gloss polyurethane coating over a smooth surface
Option - Other color available for orders over 50 vessels. Call for pricing details
CERTIFICATION:
✘ Standard - Certified by Protec Arisawa America, not code stamped
Option - ASME Code Section X, RP stamped certified by an ASME Authorized Inspector. Call for pricing details
Option - ASME Code Section X, RP stamped per above and registered with the National Board. Call for pricing details
Option - Other __________________________________________________________________________
SEAL PLATE: ✘ Noryl (standard) PET 316L Stainless Steel
PERMEATE PORT: (* Noryl is NOT available)
Feed End - Check one Material - Check one Concentrate (Opposite) End - Check one Material - Check one
1-1/4" NPT male threads (standard) Noryl (standard)
✘ ✘ 1-1/4" NPT male threads (standard) ✘ Noryl (standard)
1-1/2" NPT male threads PVC 1-1/2" NPT male threads PVC
1-1/2" IPS Grooved end PET 1-1/2" IPS Grooved end PET
1-1/4" IPS Grooved end * SST 1-1/4" IPS Grooved end * SST
1" NPT female threads 1" NPT female threads
✘ 1/2" NPT female threads * 1/2" NPT female threads *
1/4" NPT female threads 1/4" NPT female threads
1-1/2" Type 3A sanitary connection * 1-1/2" Type 3A sanitary connection *
RC1" (1" PT or 1" BSP) female threads * RC1" (1" PT or 1" BSP) female threads *
R1-1/4" (1-1/4" PT or 1-1/4" BSP) male threads * R1-1/4" (1-1/4" PT or 1-1/4" BSP) male threads *
1/4" Sampling valve (Standard Noryl Port + PVC Valve) 1/4" Sampling valve (Standard Noryl Port + PVC Valve)
Blind permeate port Blind permeate port
Autoshim (Brackish) * Others
Others
MEMBRANE INFORMATION:
Brand: HYDRANAUTICS Model: ESPA MAX 2
ADAPTER: (* Noryl is NOT available)
Feed End - Check one ✘ Thru Solid * Material - Check one ✘ Noryl PVC PET SST
Concentrate End - Check one ✘ Thru Solid * Material - Check one ✘ Noryl PVC PET SST
THRUST CONE:
Material - Check one ✘ PVC (standard) Noryl
CUSTOM VESSEL OPTIONS:
Check here for no lube on any parts
Check here for High temperature continuous operation up to 176 F, max 185 F for 30 minutes at 25 PSI. No PVC parts.
For Ultrapure operation, choose SST, PET, or Noryl Parts only, and 316L SST Permeate ports with type 3A sanitary connections.
For Sanitary operation, choose SST, PET, or Noryl Parts only, 316L SST Permeate and feed/concentrate ports with type 3A sanitary connections.
Other special requirements (instruction): _________________________________________________________________________
____________________________________________________________________________________________________________
Vessel configuration approved by __________________ Date __________________
05/31/2022 594555696.xls
8" SP - MSP VESSEL ORDER FORM
Customer: _______________ PO#: _____________ Line Item #:___________ Quantity: 4
Please note that all options will increase the vessel price - NOTE: Missing order information will delay your order
MODEL: PRO 8 - 300 - SP CUSTOMER #: _________________________
LOCKING TYPE (Choose one): ✘ PRO (Retaining Ring w/ finger pull) BPV (locking segments, 1000/1200 PSI only)
CODE: MODEL PRO/BPV 8-A-( SP - MSP )-B (Choose SP or MSP based on maximum desired side port size)
A (Pressure) 300 600
✘ 450 1000 1200
B (Length) -1 -1.5 -2 -3 ✘ -4 -5 -6 -7 -7.5 -8
Notes: B (Length) : 40" Membrane: -1, -2, -3, -4, -5, -6, -7, -8
60" Membrane: -1.5, -3, -6, -7.5
FEED/CONCENTRATE PORT CONFIGURATIONS: (see drawing for details)
SP: ✘ Standard - P1 port to port span Option - P2 port to port span Option - P3 port to port span
MSP:
Standard - P3 port to port span Option - P1 port to port span (for 300 and 450 PSI ONLY)
Fill out the feed/concentrate port requirements in the space below. List the port location first, followed by the port size code for each port.
Serial Number end 1 K 5 K
Opposite end 3 K
Port location (see diagram)
Port Size Code
Port Size Code: SP MSP
D = 1-1/2" IPS Grooved end P = 1-1/2" IPS Grooved end
E = 2" IPS Grooved end H = 2" IPS Grooved end
NOTE: 3" and 4"
¹
F = 2-1/2" IPS Grooved end J = 2-1/2" IPS Grooved end
ports are not
allowed 90° from
U = 1-1/2" Sanitary K = 3"¹ IPS Grooved end
another port S = 2" Sanitary L = 4"¹ IPS Grooved end
Z = 1-1/2" Sanitary
EXTERIOR FINISH: Y = 2" Sanitary
✘ Standard - White high gloss polyurethane coating over a smooth surface
Option - Other color available for orders over 50 vessels. Call for pricing details
CERTIFICATION:
✘ Standard - Certified by Protec Arisawa America, not code stamped
Option - ASME Code Section X, RP stamped certified by an ASME Authorized Inspector. Call for pricing details
Option - ASME Code Section X, RP stamped per above and registered with the National Board. Call for pricing details
Option - Other __________________________________________________________________________
SEAL PLATE: ✘ Noryl (standard) PET 316L Stainless Steel
PERMEATE PORT: (* Noryl is NOT available)
Feed End - Check one Material - Check one Concentrate (Opposite) End - Check one Material - Check one
1-1/4" NPT male threads (standard) Noryl (standard)
✘ ✘ 1-1/4" NPT male threads (standard) ✘ Noryl (standard)
1-1/2" NPT male threads PVC 1-1/2" NPT male threads PVC
1-1/2" IPS Grooved end PET 1-1/2" IPS Grooved end PET
1-1/4" IPS Grooved end * SST 1-1/4" IPS Grooved end * SST
1" NPT female threads 1" NPT female threads
✘ 1/2" NPT female threads * 1/2" NPT female threads *
1/4" NPT female threads 1/4" NPT female threads
1-1/2" Type 3A sanitary connection * 1-1/2" Type 3A sanitary connection *
RC1" (1" PT or 1" BSP) female threads * RC1" (1" PT or 1" BSP) female threads *
R1-1/4" (1-1/4" PT or 1-1/4" BSP) male threads * R1-1/4" (1-1/4" PT or 1-1/4" BSP) male threads *
1/4" Sampling valve (Standard Noryl Port + PVC Valve) 1/4" Sampling valve (Standard Noryl Port + PVC Valve)
Blind permeate port Blind permeate port
Autoshim (Brackish) * Others
Others
MEMBRANE INFORMATION:
Brand: HYDRANAUTICS Model: ESPA2LD
ADAPTER: (* Noryl is NOT available)
Feed End - Check one ✘ Thru Solid * Material - Check one ✘ Noryl PVC PET SST
Concentrate End - Check one ✘ Thru ✘ Solid * Material - Check one ✘ Noryl PVC PET SST
THRUST CONE:
Material - Check one ✘ PVC (standard) Noryl
CUSTOM VESSEL OPTIONS:
Check here for no lube on any parts
Check here for High temperature continuous operation up to 176 F, max 185 F for 30 minutes at 25 PSI. No PVC parts.
For Ultrapure operation, choose SST, PET, or Noryl Parts only, and 316L SST Permeate ports with type 3A sanitary connections.
For Sanitary operation, choose SST, PET, or Noryl Parts only, 316L SST Permeate and feed/concentrate ports with type 3A sanitary connections.
Other special requirements (instruction): _________________________________________________________________________
____________________________________________________________________________________________________________
Vessel configuration approved by __________________ Date __________________
05/31/2022 594555696.xls
