Scribd
Upload
108 views2 pages

EP800 @31.2m3 Per Min

This document contains the results of a filter calculation for a customer named KPCL. It analyzes an EP 800 filter type without a secondary element. The calculations show a dust capacity of 19,089g, filter life of 10,197 hours at a flow rate of 31.2 m3/min and dust concentration of 1.0 mg/m3. Charts display the relationships between flow restriction and flow rate and dust capacity. Initial and total separation efficiencies were 99.65% and 99.97%, respectively.

Uploaded by

Noor Mohammed Khan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
108 views2 pages

EP800 @31.2m3 Per Min

This document contains the results of a filter calculation for a customer named KPCL. It analyzes an EP 800 filter type without a secondary element. The calculations show a dust capacity of 19,089g, filter life of 10,197 hours at a flow rate of 31.2 m3/min and dust concentration of 1.0 mg/m3. Charts display the relationships between flow restriction and flow rate and dust capacity. Initial and total separation efficiencies were 99.65% and 99.97%, respectively.

Uploaded by

Noor Mohammed Khan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

MANN+HUMMEL

FILTER CALCULATION SYSTEM


CALCULATION RESULTS Date: 2019/01/14 V 5.8

Customer: KPCL Filter Type: EP 800


Project: 0 without secondary element

Dust Concentration: 1.0 [mg/m³] Flow Rate: 31.20 [m³/min]


∆p Air Intake Duct: - [mbar] Initial Restriction: 31.0 [mbar]
∆p Clean Gas Pipe: - [mbar] negative pressure dust port: [mbar]
Ambient Temperature: 20 [°C] Final Restriction: 65.0 [mbar]
Ambient Pressure: 1,013 [mbar] Dust Capacity: 19,089 [g]
Scavenge Flow: - [%] Filter Life: 10,197.3 [h]
Test dust PTI coarse Filter Area: 17.09 [m²]
Initial Separation Efficiency* 99.65 [%]
Total Separation Efficiency* 99.97 [%]

* at nominal flow rate, test dust acc. ISO 12103-1, filtration data acc. ISO 5011

50
FLOW RESTRICTION [mbar]

40

30

20

10

0
0.0 5.0 10.0 15.0 20.0 25.0 30.0 35.0 40.0 45.0 50.0

FLOW RATE [m³/min]


80

70
FLOW RESTRICTION [mbar]

60

50

40

30

20

10

0
0.0 5,000.0 10,000.0 15,000.0 20,000.0 25,000.0

DUST CAPACITY [g]

Source: M+H FilterCalcSystem FCS Page 1 of 2 printed at:14-01-2019


This document is the property of MANN+HUMMEL GmbH - protection notice according to ISO 16016 must be observed.

MANN+HUMMEL
FILTER CALCULATION SYSTEM

CALCULATION RESULTS Date: 2019/01/14 V 5.8


Customer: KPCL Filter Type: EP 800
Project: 0 without secondary element

Dust Concentration: 1.0 [mg/m³] Flow Rate: 31.20 [m³/min]


∆p Air Intake Duct: - [mbar] Initial Restriction: 31.0 [mbar]
∆p Clean Gas Pipe: - [mbar] negative pressure dust port: [mbar]
Ambient Temperature: 20 [°C] Final Restriction: 65.0 [mbar]
Ambient Pressure: 1,013 [mbar] Dust Capacity: 19,089 [g]
Scavenge Flow: - [%] Filter Life: 10,197.3 [h]
Test dust PTI coarse Filter Area: 17.09 [m²]
Initial Separation Efficiency* 99.65 [%]
Total Separation Efficiency* 99.97 [%]

* at nominal flow rate, test dust acc. ISO 12103-1, filtration data acc. ISO 5011

60 35000

30000
50
FLOW RESTRICTION [mbar]

25000
40

FILTER LIFE [hrs]


20000
30
15000

20
10000

10
5000

0 0
0.0 5.0 10.0 15.0 20.0 25.0 30.0 35.0 40.0
FLOW RATE [m³/min]

Notes:

This document is the property of MANN+HUMMEL GmbH - protection notice according to ISO 16016 must be observed.

Source: M+H FilterCalcSystem FCS Page 2 of 2 printed at:14-01-2019

You might also like