Scribd
Upload
173 views1 page

Step Bolt Manufacturing Specs

This job card is for producing 22,191 pieces of M20 x 245mm step bolts for TLL(Mali) according to the given drawing specifications. The raw material required is 20mm diameter grade 10B33/10B35 steel with a hardness of 29-31 HRC. The bolts will have a head diameter of 35+/-0.2mm, head thickness of 6+/-0.1mm, shank diameter of 19.5-20.5mm, total length of 245+/-0mm, thread diameter of 18.2-18.3mm, under head radius of 3mm, and thread length of 65-70mm. Quality control inspection will check the forging diameter, head

Uploaded by

mahesh agarwal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
173 views1 page

Step Bolt Manufacturing Specs

This job card is for producing 22,191 pieces of M20 x 245mm step bolts for TLL(Mali) according to the given drawing specifications. The raw material required is 20mm diameter grade 10B33/10B35 steel with a hardness of 29-31 HRC. The bolts will have a head diameter of 35+/-0.2mm, head thickness of 6+/-0.1mm, shank diameter of 19.5-20.5mm, total length of 245+/-0mm, thread diameter of 18.2-18.3mm, under head radius of 3mm, and thread length of 65-70mm. Quality control inspection will check the forging diameter, head

Uploaded by

mahesh agarwal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

H.R.

STEEL INDUSTRIES
JOB CARD FOR M 20 X 245MM STEP BOLT FOR TLL(MALI) G478

SPECIFICATION AS PER DRAWING.


TITLE: HRSI/TLL/M20 SB/01
MACHINE NAME & NO.: 12 " HEADER
JOB CARD NO.:
PRODUCT : M 20 X 245 LENGTH DATE: 29 /01 / 2022
QTY. REQUIRED. : 22191 PCS / 13557 KGS DIA GRADE

BATCH NO. : RAW MATERIAL : 20 mm 10B33/10B35


HARDNESS = 29-31 HRC (MAX.)

R3.0
19.5-20.5
HRS
35 +2
-0

8.8
65-70

6 +1 245 +2/-0
-0
M20 T/R DIA: Ø 18.20-18.30

FORGING
HEAD Head Total Under head Shank T/R Concen Surface
DIAMETER Dia Thk length Radius DIA tricity Discontinuity
dia(Ø)

35 +2 6 +1 18.20-
M20 245+ 2/-0 3 19.5-20.5
-0 -0 18.30

Observation
FORGING
Sl. no. Shank Forging Head Total Thread Under head Concen Surface
dia(Ø) dia(Ø) Thk Length Length Radius tricity Discontinuity
1

Inspected by :- Signature of H.Q.C.

You might also like