Types of Batteries

What is a Battery?
A battery is a device that holds electrical energy in the form of chemicals. With the help
of an electrochemical reaction, it converts stored chemical energy into direct current
(DC) electrical energy.

The electrochemical reaction in a battery is carried out by moving electrons from one
material to another (called electrodes) using an electric current. The first battery was
invented in 1800 by Italian physicist Alessandro Volta.

Whether you are an engineer or not, you must have seen at least two different types of
batteries that is small batteries and larger batteries. Smaller batteries are used in devices
such as watches, alarms, or smoke detectors, while applications such as cars, trucks, or
motorcycles, use relatively large rechargeable batteries.

Batteries have become a significant source of energy over the past decade. Moreover,
batteries are available in different types and sizes as per their applications. So we wil l
discuss different types of batteries and their uses, so let's get started.

Read Also: Different Types of Fasteners and Their Uses & Examples

How Does A Battery Work?

TheEngineersPost.com Page 1
 Types of Batteries

The battery produces electrical energy on demand by using the terminals or electrodes
of the battery. The positive terminal is located on the top of the battery which is used for
customer interests such as flashlights and electronics.

The outer case or bottom of the battery is commonly referred to as the negative
terminals. Both terminals are very common in all types of batteries. The chemicals that
surround these terminals and the battery together form the power cell.

The power cell generates energy whenever the positive and negative terminals are
connected to an electrical circuit. For example, the metal part in the flashlight case and
the device is on. The chemicals inside the cell (alkaline or lithium) begin a reaction to
produce the ions and electrons that power anything attached to the battery.

Read Also: What is an Insulator? How does it work In transmission lines?

Classification of Batteries
1. Primary battery
2. Secondary battery

#1 Primary Battery

A primary battery is a simple and convenient source of electricity for many portable
electronic devices such as lights, cameras, watches, toys, radios, etc. These types of
batteries cannot be recharged once they are exhausted. They are composed of
electrochemical cells whose electrochemical reactions cannot be reversed.

Generally, primary batteries are relatively inexpensive, lightweight, and convenient to

use, with little or no maintenance. Primary batteries exist in many sizes and forms,
ranging from coin cells to AA batteries. These are commonly seen in applications like
pacemakers, animal trackers, wristwatches, remote controls, children's toys, etc.

#2 Secondary Battery

Secondary batteries use electrochemical cells whose chemical reactions can be reversed
by applying a certain voltage to the battery. It is also known as a rechargeable battery
because it can be recharged after the battery's energy is depleted. They are use d as
inverters for power supply as well as standalone power sources.

They are also used where it would be too expensive or impractical to use a single
charged battery. Small-capacity secondary batteries are used in portable devices such as

TheEngineersPost.com Page 2
 Types of Batteries

mobile phones, while heavy-duty batteries are found in electric vehicles and other high-
drain applications.

Types of Batteries
The following are the types of batteries that are explained with their uses:

1. Lead-acid batteries
2. Nickel-cadmium batteries (Ni-Cd)
3. Nickel-metal hybrid batteries (Ni-MH)
4. Lithium-ion batteries (Li-ion)
5. Alkaline batteries
6. Zinc-carbon batteries
7. Coin cell batteries
8. Zinc-air cells
9. Sealed lead-acid batteries

Read Also: What are the different types of DC generators?

#1 Lead-acid Batteries

It is a type of rechargeable battery containing lead acid that is much cheaper and is seen
in most cars and vehicles to power the lighting system. Lead-acid batteries have a
relatively low energy density compared to modern rechargeable batteries.

TheEngineersPost.com Page 3
 Types of Batteries

Despite this, their ability to supply high currents means that the cells have a relatively
large power-to-weight ratio. Lead-acid battery capacity is 2V to 24V and is commonly
seen as 2V, 6V, 12V, and 24V batteries. Its power density is 7 Wh/kg.

Since they are available at a low cost, providing the high current required by starter
motors makes them perfect for use in motor vehicles.

#2 Nickel-cadmium Batteries (Ni-Cd)

Nickel-cadmium battery is also a type of rechargeable battery that uses nickel oxide
hydroxide and the metal cadmium as electrodes. One of the main advantages of Ni-Cd
batteries is that they can maintain voltage and hold a charge when not in use.

These types of batteries have a terminal voltage that drops almost to the end of the
discharge, during a discharge of about 1.2 volts. Although they are rarely used, they are
cheap and have a much lower discharge rate than NiMH batteries.

These are made in various sizes and capacities, from portable sealed to large fanned
cells used for standby power and motor power. Smaller packs are used in portable
devices, electronics, and toys, while larger packs are used in aircraft starting batteries
and electric vehicles.

#3 Nickel-metal Hybrid Batteries (Ni-MH)

TheEngineersPost.com Page 4
 Types of Batteries

It is a rechargeable battery used in everyday electronic devices such as smartphones,

laptop computers, and portable power tools. In this type, the chemical reaction at the
positive electrode is similar to that of a nickel-cadmium cell, with both using nickel
oxide hydroxide.

Nevertheless, the negative electrodes use a hydrogen-absorbing alloy instead of the

cadmium that is used in NiCd batteries. This battery finds application in high-drain
devices due to its high capacity and energy density. They are generally used as an
alternative because they have a slightly lower but generally compatible cell voltage.

Read Also: Different Types Of CNC Machine [Complete Guide]

#4 Lithium-ion Batteries (Li-ion)

These types of batteries are composed of cells in which lithium ions move from the
negative electrode through the electrolyte to the positive electrode during discharge
and back when it's charging. Lithium-ion batteries are used in heavy electrical current
usage devices such as remote car fobs.

These are widely used batteries that are commonly found in laptops, mobile phones,
cameras, etc. Lithium-ion batteries typically have a higher energy density, little or no

TheEngineersPost.com Page 5
 Types of Batteries

memory effect, and lower self-discharge than other battery types. They have a longevity
of 300 to 500 charge cycles or about two to three years.

#5 Alkaline Batteries

Alkaline batteries convert chemical energy into electrical energy by using manganese
dioxide as the positive electrode and a zinc cylinder as the negative electrode to power
an external circuit. The rechargeable alkaline battery is designed to be fully charged
after repeated use.

It can be used for high- and low-drain devices but can wear out quickly in high-drain
devices such as digital cameras. These batteries have a higher energy density and longer
life, yet provide similar voltages as zinc-carbon batteries. It can be hazardous to
recharge disposable alkaline batteries, so the user should look closely at its label.

#6 Zinc Carbon Batteries

A zinc-carbon battery provides a direct electric current from the electrochemical

reaction between zinc and manganese dioxide in the presence of an electrolyte. These
are found in appliances throughout the home, such as the remote control running the
thermostat.

They typically offer higher capacity and lower internal resistance than alkaline
batteries. In addition, they have improved low-temperature performance, improved

TheEngineersPost.com Page 6
 Types of Batteries

leakage resistance, and low self-discharge. Zinc-carbon batteries have a short life cycle
and are best suited for low-drain devices.

Read Also: What are the types of capacitors? Their Working & Uses

#7 Coin Cell Batteries

A coin cell battery is a small single-cell battery usually shaped as a squat cylindrical in
diameter to resemble a button. These types of batteries have a separator that technicians
contact an electrolyte between them, and control the flow of ions that create electricity.

They have a long service life and are found in small portable devices such as watches
and pocket calculators. It is made of stainless steel that forms the cell's lower body and
positive terminal and a metallic top cap forms the negative terminal. Because they are
so consistent and reliable, they are great for use in products that require long,
continuous service.

#8 Zinc-air Batteries

Zinc-air batteries typically operate by oxidizing zinc with oxygen from the air. Since
they are activated by air, they are ready for use when the oxygen interacts with the zinc
in the battery. They have high energy density and are relatively inexpensive to produce.

TheEngineersPost.com Page 7
 Types of Batteries

They are available in a variety of sizes, from very small button cells for hearing aids to
the large batteries used in film cameras. These types of batteries remain active until the
power runs out, usually about three years. Benefits of this battery include flat discharge
voltage, safety environmental benefits, and low cost.

#9 Sealed Lead-acid Batteries

It is a type of lead-acid battery in which the sulfuric acid electrolyte is condensed

(thickened), so it cannot drain out. They are somewhat sealed but have vents if the
gases are accidentally released by overcharging. This battery is designed to last up to 12
years.

It can be mounted in any position and does not require regular maintenance. It has a
relief valve that is activated when the battery generates hydrogen gas. These types of
batteries perform well at high load currents. They are found in motorcycles and all-
terrain vehicles, wheelchairs, scooters, and boats.

Read Also: How does a DC motor works? [PDF]

How To Select A Battery?

There are only two features to consider when selecting a battery for your application
which are performance and cost. But if we look a little deeper, there are a few more
factors that go into choosing the right battery for your application.

Below are some factors to consider when selecting the right type of battery for your use:

#1 Energy Density

Energy density refers to the total amount of energy that can be stored per unit mass or
volume. This determines how long your device remains on before it needs a recharge.

TheEngineersPost.com Page 8
 Types of Batteries

#2 Power Density

Power density refers to the maximum rate of energy discharge per unit mass or volume.
For example, Low power is ideal for laptops, and i-pod. Whereas higher power is
suitable for power tools.

#3 Safety

It is vital to ensure that the temperature at which you are making the device will work.
In the case of high temperatures, some battery components will break down and may
undergo exothermic reactions.

#4 Life Cycle Durability

The long battery life required for most applications needs the stability of the battery's
energy density and power density with frequent cycling (charging and discharging).

#5 Cost

It is important that the cost of your battery choice is proportional to its performance and
does not abnormally increase the overall cost of the project.

#6 Charging Current

It is defined as the maximum current that can be applied to charge the battery. This is
practically a maximum of 1A/2A that can be applied if a battery protection circuit is
built-in but still 500 mA is the best range for a battery charge.

#7 Charging Voltage

Charging voltage refers to the maximum voltage that must be applied to the battery in
order to charge the battery efficiently. Basically, 4.2 V considers the best charging
voltage.

Wrapping It Up
As I already said, batteries are devices that accept, store, and release electricity on
demand. There are many types of batteries available for consumer use, and each has

TheEngineersPost.com Page 9
 Types of Batteries

different uses. It will continue to build the way we live as it plays a central role in
enabling clean and renewable energy.

So for now, I hope that you have learned about the “Types of Transmission“. If you
have any questions or doubts about this article, feel free to ask in the comments. If you
got this article helpful, please share it with your friends.

Want free PDFs in your inbox? Then subscribe to our newsletter.

You might like to read more in our blog:

1. What are the parts and functions of a car engine?

2. List of Car Interior Parts with [Name & Functions]
3. The Complete List of Car Body Parts [Names & Functions]

TheEngineersPost.com Page 10