Scribd
Upload
32 views2 pages

Nirma University Institute of Technology Bachelor of Technology (A.Y. 2018 - 19)

The document outlines the course ME103 Engineering Graphics at Nirma University's Institute of Technology for the academic year 2018-19. It details the course learning outcomes, syllabus divided into five units covering topics such as engineering drawing principles, solid geometry, orthographic projections, and computer-aided drafting. Laboratory work will complement the theoretical learning, with suggested readings provided for further study.

Uploaded by

shreeramsharma
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
32 views2 pages

Nirma University Institute of Technology Bachelor of Technology (A.Y. 2018 - 19)

The document outlines the course ME103 Engineering Graphics at Nirma University's Institute of Technology for the academic year 2018-19. It details the course learning outcomes, syllabus divided into five units covering topics such as engineering drawing principles, solid geometry, orthographic projections, and computer-aided drafting. Laboratory work will complement the theoretical learning, with suggested readings provided for further study.

Uploaded by

shreeramsharma
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Nirma University

Institute of Technology
Bachelor of Technology
(A.Y. 2018 – 19)

L T P C
2 0 4 4

Course Code ME103


Course Title Engineering Graphics

Course Learning Outcomes (CLO):


After successful completion of the course, students will be able to-

1. explain the fundamental principles of engineering graphics and related drawing standards,
2. illustrate the various methods of producing and presenting graphic information,
3. make use of engineering graphics for communication using traditional means and the computer
aided tools,
4. develop capability to visualize and represent geometry in two dimensions and in three
dimensions,
5. summarize the role of engineering graphics in various engineering disciplines.

Syllabus: Teaching hours: 30

UNIT - I 02 hours
Introduction to Engineering Drawing
Importance and applications of engineering drawing for various branches of engineering, drawing
instruments, BIS Code of Practice, Lines, Lettering and Dimensioning, Scales, basic geometrical
construction, Sheet Layout
UNIT-II 04 hours
Engineering Curves
Construction of Conics by different methods, construction of cycloid, epicycloid and hypocycloid,
construction of involutes, constructions of archimedean spiral and helix.
UNIT-III 14 hours
Solid Geometry
Principle of Orthographic Projections, projections of points, projections of straight lines, projections of
planes, projections of regular solids and sections of regular solids.
Developments of Surfaces
Development of lateral surfaces of regular solids (prism, pyramid, cone, cylinder) by parallel line method
/ radial line method.
UNIT-IV 05 hours
Orthographic Projections
Conversion of pictorial views into orthographic projections including sectional orthographic projections.
Isometric Projections
Conversion of orthographic views into isometric projections / views.
UNIT-V 05 hours
Computer Aided Drafting
Understanding of GUI (Graphical User Interface) of drafting software, demonstration of use of available
Drawing Commands, Modifying / Editing commands, Annotation and Dimensioning Commands,
Concepts of Layers, demonstration of various line styles and construction of drawings in soft form using
drafting software.
Conventional representation
Symbols for standard machinery components such as nuts, bolts, locking devices, riveted and welded
joints, foundation bolts. Symbols used in electrical, electronics and civil engineering

Self-Study:
The self-study contents will be declared at the commencement of semester. Around 10% of the questions
will be asked from self-study contents.

Laboratory Work:
Laboratory work will be based on the above syllabus with equal emphasis on use of drafting software and
drawing sheets.

Suggested Readings:

1. Bhatt, N. D., Engineering Drawing, Charotar publication


2. John, K. C. Engineering Graphics, PHI Publication.
3. Luzzader, W. J. and Duff, J. M. Fundamentals of Engineering Drawing, PHI publication.
4. Bethune, J. D. Engineering Graphics with AutoCAD®, PHI Publication.
5. IS SP 46: 2003. Engineering Drawing Practices for Schools and Colleges.

L = Lecture, T = Tutorial, P = Practical, C = Credit

You might also like