Spare Parts Catalog Doc. no. R 223.

1444

SANDVIK CH660:04
This document is valid for:

Serial no. / Machine no. Sign.

SANDVIK CH660:04

© Copyright 2015 Sandvik SRP AB.

All rights reserved. No parts of this document may be reproduced or copied in any form or by
any means without written permission from Sandvik SRP AB. All data and information in this
manual may be changed without further notice. Reservations for misprints.

Document number: R 223.1444

Issue: 2015-05-04
Version: 01

Document type: Spare Parts Catalog (SPC)

Sandvik
Stationsplan, SE-233 81 Svedala, Sweden
Tel: +46 (0)40 409000, Fax: +46 (0)40 409260
www.sandvik.com
SPC Sandvik CH660:04

General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Cone crusher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Cone crusher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

1. Feed hopper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

1a. Feed hopper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

1b. Feed hopper lining, upper kit . . . . . . . . . . . . . . . . . . . . . . 19

1c. Rubber lining kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

1d. Rubber lining kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

1e. Cones alt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

1f. MC cone kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

1g. C cone kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

1h. EC cone kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

1i. Feed distributor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

2. Topshell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

2a. Topshell excluding concave . . . . . . . . . . . . . . . . . . . . . . . 32

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 3

SPC Sandvik CH660:04

2b. Topshell including concave . . . . . . . . . . . . . . . . . . . . . . . 34

2c. Fasteners for topshell . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

2d. Concave alternatives . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

2e. Filler ring alternatives . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

3. Mainshaft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

3a. Mainshaft excluding mantle . . . . . . . . . . . . . . . . . . . . . . . 40

3b. Mainshaft including mantle . . . . . . . . . . . . . . . . . . . . . . . 42

3c. Head nut with burning ring . . . . . . . . . . . . . . . . . . . . . . . . 44

3d. Mantle alternatives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

4. Dust collar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

4a. Dust collar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

4b. Locating bar kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

5. Eccentric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

5a. Eccentric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

5b. Eccentric bushing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

5c. Gear and pinion set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

6. Bottomshell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
4 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB
SPC Sandvik CH660:04

5a. Bottomshell with rubber liners (standard) . . . . . . . . . . . 58

6b. Bottomshell with steel wear plates liners (option) . . . . . 60

6c. Foot assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

6d. Rubber lining bottomshell . . . . . . . . . . . . . . . . . . . . . . . . 63

6e.Rubber lining kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

6f. Steel wear plate lining bottomshell . . . . . . . . . . . . . . . . . 65

6g. Bolt set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

6h. Arm liners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

6i. Temperature transmitter alternative . . . . . . . . . . . . . . . . . 68

7. Hydroset cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

7a. Hydroset cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

7b. Piston . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

7c. Step bearing set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

7d. Chevron packing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

7e. Position transmitter alternative . . . . . . . . . . . . . . . . . . . . 75

7f. Position transmitter plug . . . . . . . . . . . . . . . . . . . . . . . . . . 76

7g. Position transmitter assembly ASRi . . . . . . . . . . . . . . . . 77

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 5

SPC Sandvik CH660:04 Table of contents

7h. Hydroset protection alternative . . . . . . . . . . . . . . . . . . . . 78

7i. Hydroset protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

7j. Hydroset protection screws . . . . . . . . . . . . . . . . . . . . . . . 80

8. Hydroset system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

8a. Hydroset system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

8b. Check valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

8c. Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

8d. Accumulator alternative . . . . . . . . . . . . . . . . . . . . . . . . . . 86

9. Pinionshaft housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

9a. Pinionshaft housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

9b. Pinionshaft housing repair kit . . . . . . . . . . . . . . . . . . . . . 90

10. Hoses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

10a. Hoses assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

10b. Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

10c. Adapter kit alternative . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

10d. Adapter kit JIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

10e. Adapter kit BSP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

6 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04

11. Overpressure unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97

11a. Overpressure unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

11b. Overpressure unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

11c. Overpressure unit - Fan . . . . . . . . . . . . . . . . . . . . . . . . 100

11d. Overpressure fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

11e. Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

11f. Overpressure unit - Compressed air . . . . . . . . . . . . . . 103

11g. Overpressure connection . . . . . . . . . . . . . . . . . . . . . . . 103

11h. Overpressure connection STD . . . . . . . . . . . . . . . . . . . 104

12. Drive alternatives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

12a. Drive alternatives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106

12b. V-belt drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108

12c. Motor alternative . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110

12d. Cover, V-belt alternative . . . . . . . . . . . . . . . . . . . . . . . . 111

12e. Cover, V-belt Left . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112

12f. Cover, V-belt Right . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113

12g. Cover, V-belt 8V Left . . . . . . . . . . . . . . . . . . . . . . . . . . . 114

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 7

SPC Sandvik CH660:04

12h. Cover, V-belt 8V Right . . . . . . . . . . . . . . . . . . . . . . . . . . 115

12i. Drive Alt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116

12j. V-belt drive SPC 50 Hz 4-pole . . . . . . . . . . . . . . . . . . . . 117

12k. V-belt drive SPC 60 Hz 4-pole . . . . . . . . . . . . . . . . . . . . 118

12l. V-belt drive 8V 60 Hz 4-pole . . . . . . . . . . . . . . . . . . . . . . 119

12m. Spacer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120

12n. Rubber damper large . . . . . . . . . . . . . . . . . . . . . . . . . . 121

12o. Rubber damper small . . . . . . . . . . . . . . . . . . . . . . . . . . 122

12p. Rubber dampers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123

12q. Rubber damper large single screw . . . . . . . . . . . . . . . 124

13. Sign board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125

13a. Sign board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126

14. Tool kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129

14a. Tool box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130

14b. Cover kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131

15. Crushing chamber alternatives . . . . . . . . . . . . . . . . . . . . . 133

15a. Crushing chamber alternatives . . . . . . . . . . . . . . . . . . 134

8 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04

16. Recommended spare parts . . . . . . . . . . . . . . . . . . . . . . . . .139

16a. Recommended spare parts . . . . . . . . . . . . . . . . . . . . . . 140

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 9

SPC Sandvik CH660:04

This page is intentionally left blank

10 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04

General

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 11

SPC Sandvik CH660:04

General
Ordering information
When ordering parts, always state the machine type, manufacturing number,
serial number and order number according to the identification plate on the
cone crusher or tank. State quantity, article number and denomination for
each ordered part. The quantities listed in this catalog show how many pieces
of each part that are usually exchanged in a certain position.
Crusher’s identification plate
The figure below shows an example of the crusher’s identification plate. The
identification plate contains data needed when contacting Sandvik
concerning wear parts.
Please enter the serial number of the associated machine in the intended field
on the first page of this Spare Parts Catalog (the copyright page).
The “Type” designation is part of an identification system that describes the
product.

9
8

1 2 3 4 5 6 7

CH660 -M/B/M/50-36/40/44/32:01

10 11 12 13 14 15 16

Identification plate Type:

1 Type 10 Type and size of crusher
2 Serial number 11 Crushing chamber (concave ring)
3 Local mfg number 12 Mantle
4 Order number 13 Filler ring (if used)
5 Mass (kg) 14 Gear set: 50/60 Hz
6 Max operating speed 15 Eccentric throw (mm), first digit = factory setting
7 Manufacturer 16 Development step
8 Year of manufacture
9 CE Mark

(Continued)

12 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04

(Continued)
Think ahead!
Avoid unnecessary downtime and increased freight charges by ordering parts
well in advance.
Feedback
If you have comments on this Spare Parts Catalog or problems connected to
the crusher’s documentation, send an e-mail to: [email protected]

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 13

SPC Sandvik CH660:04

This page is intentionally left blank

14 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04

Cone crusher

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 15

SPC Sandvik CH660:04

Cone crusher

3
2
4
6
5
8 9

7 10

Pos. No. Cat. No. Description Remarks

1 7000 Feed hopper See section 1. Feed hopper
2 5000 Topshell assembly See section 2. Topshell
3 4000 Mainshaft assembly See section 3. Mainshaft
4 1400 Dust collar assembly See section 4. Dust collar
5 1800 Eccentric assembly See section 5. Eccentric
6 1000 Bottom shell assembly See section 6. Bottomshell
7 2000 Hydroset cylinder assembly See section 7. Hydroset cylinder
8 8000 Hydroset system See section 8. Hydroset system
9 3000 Pinionshaft housing assembly See section 9. Pinionshaft housing
10 Hoses See section 10. Hoses
11 Overpressure unit See section 11. Overpressure unit
12 Drive alternatives See section 12. Drive alternatives
13 Sign board See section 13. Sign board
14 Tool kit See section 14. Tool kit
15 Crushing chamber alternatives See section 15. Crushing chamber alternatives
16 Recommended spare parts See section 16. Recommended spare parts

16 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04

1. Feed hopper

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 17

SPC Sandvik CH660:04 452.4132

1a. Feed hopper

7, 8, 10
1 4

5
6, 7, 8 A-A

A A

7, 8, 9

Pos. No. Qty. Part number Alternative Description Remarks

Feed hopper assembly
1 1 452.3877-901 Feed hopper, lower
2 1 452.3878-901 Feed hopper, upper
3 1 891.1895-901 Feed hopper lining, upper kit See section 1b. Feed hopper lining,
upper kit
4 1 Cones alt See section 1e. Cones alt
5 1 452.4306-901 Feed distributor assembly See section 1i. Feed distributor
6 12 840.0070-00 Screw M6S 16×60 8.8 FZB ISO 4017
7 40 847.0016-00 Washer BRB 17×30 HB200 ISO 7089
8 40 845.0215-00 Nut lock ISO 7040 M16 8 FZB
9 16 840.0067-00 Screw M6S 16×45 8.8 ISO 4017
10 12 840.0069-00 Screw M6S 16×55 8.8 ISO 4017

18 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04 891.1895

1b. Feed hopper lining, upper kit

1
6

9 8 7 10

2 11 3 4 5

Pos. No. Qty. Part number Alternative Description Remarks

891.1895-901 Feed hopper lining kit Consists of:
1 16 891.1896-901 Feed hopper lining See section 1c. Rubber lining kit
2 32 891.0462-001 Square washer
3 32 847.0147-00 Round washer 13×24 ZP
4 32 845.0030-00 Lock nut M12 8 ZP
5 32 843.1323-00 Carriage bolt M12×40 4.6 ZP
6 2 442.9750-01 Rubber sheet See section 1d. Rubber lining kit
7 8 845.0215-00 Nut lock ISO 7040 M16 8 FZB
8 16 847.0016-00 Washer BRB 17×30 HB200 ISO 7089
9 8 840.0071-00 Screw M6S M16×65 8.8 ISO 4014
10 8 873.1287-00 Rubber plug Ø40×40 mm
11 32 891.0401-001 Rubber plug ø54 × 40 mm

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 19

SPC Sandvik CH660:04 891.2128

1c. Rubber lining kit

2 4
5 3
6 1

Pos. No. Qty. Part number Alternative Description Remarks

891.2128-901 Rubber lining kit Consists of:
1 1 891.1896-901 Feed hopper lining
2 2 891.0462-001 Square washer
3 2 847.0147-00 Washer BRB 13×24 HB200 ISO 7089
4 2 845.0030-00 Lock nut M12 8 fzb ISO 7040
5 2 843.1323-00 Screw MVBF M12x40 4,6 DIN 603
6 2 891.0401-001 Rubber plug Ø 54×40 mm

20 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04 891.2129

1d. Rubber lining kit

2
3
1
3
4
5

Pos. No. Qty. Part number Alternative Description Remarks

891.2129-901 Rubber lining kit Consists of:
1 1 442.9750-01 Rubber sheet
2 4 845.0215-00 Nut lock ISO 7040 M16 8 fzb
3 8 847.0016-00 Washer BRB 17×30 HB200 ISO 7089
4 4 840.0071-00 Screw M6S 16x65 8.8 ISO 4014
5 4 873.1287-00 Rubber plug Ø 40×40

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 21

SPC Sandvik CH660:04 452.4213

1e. Cones alt

Cat. No. Pos. No Qty. Part number Alternative Description Remarks

452.4213-901 Cones MC Consists of:
1 4 452.4216-901 Cone MC
2 1 891.1908-901 Rubber lining MC kit See section 1f. MC cone kit

452.4212-901 Cones C Consists of:

1 4 452.4214-901 Cone C
2 1 891.1902-901 Rubber lining C kit See section 1g. C cone kit

452.4211-901 Cones EC Consists of:

1 4 452.4202-901 Cone EC
2 1 891.1897-901 Rubber lining EC kit See section 1h. EC cone
kit

22 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04 891.1908

1f. MC cone kit

4 1

5 2

2 3

A (1:5)

Cat. No. Pos. No Qty. Part number Alternative Description Remarks

891.1908-901 MC cone kit Consists of:
1 24 891.1909-901 Rubber lining cone MC
2 96 847.0147-00 Washer BRB 13×24 Hb200 ISO 7089
3 48 845.0030-00 Lock nut M12 8 fzb ISO 7040
4 48 891.0401-001 Rubber plug Ø54×40mm
5 48 840.0047-00 Screw M6S 12×40 8.8 ISO 4017

(Continued)

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 23

SPC Sandvik CH660:04 891.2132

(Continued)
Rubber lining MC cone kit

2
4 3
5
2

Pos. No Qty. Part number Alternative Description Remarks

891.2132-901 Rubber lining MC cone kit Consists of:
1 1 891.1909-901 Rubber lining
2 4 847.0147-00 Washer BRB 13×24 Hb200 ISO 7089
3 2 845.0030-00 Lock nut M12 8 fzb ISO 7040
4 2 840.0047-00 Screw M6S 12×40 8.8 ISO 4017
5 2 891.0401-005 Rubber plug Ø54×30

24 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04 891.1902

1g. C cone kit

4
2
1

3
A (1:5)
2

Cat. No. Pos. No. Qty. Part number Alternative Description Remarks
891.1902-901 C cone kit Consists of:
1 24 891.1903-901 Rubber lining
2 96 847.0147-00 Washer BRB 13×24 Hb200 ISO 7089
3 48 845.0030-00 Lock nut M12 8 fzb ISO 7040
4 48 891.0401-001 Rubber plug Ø54×40mm
5 48 840.0047-00 Screw M6S 12×40 8.8 ISO 4017

(Continued)

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 25

SPC Sandvik CH660:04 891.2131

(Continued)
Rubber lining C cone kit

2
4
3
5
2

Pos. No. Qty. Part number Alternative Description Remarks

891.2131-901 Rubber lining C cone kit Consists of:
1 1 891.1903-901 Rubber lining
2 4 847.0147-00 Washer BRB 13×24 Hb200 ISO 7089
3 2 845.0030-00 Lock nut M12 8 fzb ISO 7040
4 2 840.0047-00 Screw M6S 12×40 8.8 ISO 4017
5 2 891.0401-005 Rubber plug Ø54×30

26 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04 891.1897

1h. EC cone kit

5 1

4 2

A (1:5)

Cat. No. Pos. No. Qty. Part number Alternative Description Remarks
891.1897-901 EC cone kit Consists of:
1 96 847.0147-00 Washer BRB 13×24 Hb200 ISO 7089
2 48 845.0030-00 Lock nut M12 8 fzb ISO 7040
3 24 891.1898-901 Rubber lining cone EC
4 48 840.0047-00 Screw M6S 12×40 8.8 ISO 4017
5 48 891.0401-001 Rubber plug Ø54×40mm

(Continued)

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 27

SPC Sandvik CH660:04 891.2130

(Continued)
Rubber lining EC cone kit

3
4 2
5 3

Pos. No. Qty. Part number Alternative Description Remarks

891.2130-901 Rubber lining EC cone kit Consists of:
1 1 891.1898-901 Rubber lining EC cone
2 2 845.0030-00 Lock nut M12 8 fzb ISO 7040
3 4 847.0147-00 Washer BRB 13×24 Hb200 ISO 7089
4 2 840.0047-00 Screw M6S 12×40 8.8 ISO 4017
5 2 891.0401-005 Rubber plug Ø54×30

28 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04 452.4306

1i. Feed distributor

4 5 6

11

33 22

Pos. No. Qty. Part number Alternative Description Remarks

452.4306-901 Feed distributor kit Consists of:
1 1 442.8853-01 Bracket
2 1 442.5621-90 Feed distributor left
3 1 442.5621-00 Feed distributor right
4 6 840.0065-00 Screw M6S 16×35 8.8 ISO 4017
5 6 847.0016-00 Washer BRB 17×30 HB200 ISO 7089
6 6 845.0009-00 Nut M6m M16 fzb ISO 4032

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 29

SPC Sandvik CH660:04

This page is intentionally left blank

30 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04

2. Topshell

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 31

SPC Sandvik CH660:04 BG00395488

2a. Topshell excluding concave

2 1 3 15
45 ±5

16

C
B B

3 5
4 3 7 9 12 8
12
13 11 10 6

14
C-C (1:5) B-B (1:5)

(Continued)

32 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04 BG00395488

(Continued)
Pos. No. Qty. Cat. No. Part No. Description Remarks
5000 BG00395488 Topshell assembly excluding concave Consists of:
1 1 5005-0 Topshell CH660 Cannot be ordered sepa-
rately
2 2 5150-0 442.8812-00 Arm Shield CH660
3 4 5220-0 900.0425-00 Pipe Joint GE 10-LR
4 1 452.4154-001 Steel pipe, DIN 2391/C-ST 35,4 FZ10x1,5
5 1 5240-0 452.4153-001 Steel pipe DIN 2391/C-ST 35,4 FZ10x1,5
6 1 5253-0 914.0093-00 Lubrication nipple AH R 1/4"
7 1 5650-1 912.0114-00 Air Filter Element P10102 R 1/4"
8 1 5650-2 900.0169-00 Hexagon Nipple 1/4 N8
9 1 5650-3 900.0002-00 Elbow A1 Zn DN8 zinced
10 1 5680-3 900.0654-00 Adapter G 1/2 BxG 1/2
11 1 5680-2 900.2624-00 Nut U6M 1/2"
12 2 5253-1 900.1030-00 Adapter RI 1/2"-1/4"
13 1 5680-0 191.2376-00 Temperature sensor
14 1 5680-1 191.3213-00 Connection Box CBT (TT5)
15 2 5650-6 900.0431-00 Pipe Joint GE 15-LR
16 1 5681-2 452.4195-001 Steel Pipe DIN 2391/C-ST 35,4 FZ15x1,5

(Continued)1

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 33

SPC Sandvik CH660:04 BG00395290

2b. Topshell including concave

21
2 1 3 20 23 14 7 11 41

22 ±5

28 26 42
27
33 22

43 C
A A (1:4)
35
C
36 8 10
B B
38 17
37 9
25 B-B (1:5)

34 24 39 40

3 5
12 13
4
3
17
18 16 15 6
19
C-C (1:5)
D

32 31 30 29 33

D (1 : 6)

(Continued)

34 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04 BG00395290

(Continued)
Pos. No. Qty. Cat. No. Part No. Description Remarks
BG00395290 Top shell assembly incl. concave Consists of:
1 1 5005-0 Topshell CH660 Cannot be ordered separately
2 2 5150-0 442.8812-00 Arm Shield CH660
3 4 5220-0 900.0425-00 Joint, PipeGE 10-LR
4 1 452.4154-001 Pipe, Steel DIN 2391/C-ST 35,4 FZ10x1,5
5 1 5240-0 452.4153-001 Pipe, Steel DIN 2391/C-ST 35,4 FZ10x1,5
6 1 5253-0 914.0093-00 Nipple, Lubrication AH R 1/4"
7 1 5650-0 452.3841-001 Spider cap CH660
8 1 5650-1 912.0114-00 Filter Element, Air P10102 R 1/4"
9 1 5650-2 900.0169-00 Nipple, Hexagon 1/4 N8
10 1 5650-3 900.0002-00 Elbow A1 Zn DN8 zinced
11 1 5651-0 873.1401-00 O-Ring 594,1x5,7 NBR 70
12 4 5655-0 840.0080-00 Screw M6S M20x80 8.8 ZP
13 4 5655-2 847.0165-00 Washer TBRB 21x37 ZP
14 1 5675-0 BG00248051 Spider bushing Ar. CH/S 660
15 1 5680-3 900.0654-00 Adapter G 1/2 BxG 1/2 B
16 1 5680-2 900.2624-00 Nut U6M 1/2"
17 2 5253-1 900.1030-00 Adapter RI 1/2"-1/4"
18 1 5680-0 191.2376-00 Sensor, Temperature
19 1 5680-1 191.3213-00 Box, Connection CBT (TT5)
20 6 5685-0 840.0652-00 Screw M6S M20x90 8.8 ZP
21 6 5685-2 847.0132-00 Washer round 21x36 ZP
22 1 5705-0 442.8755-01 Seal Ring CH660/CS660
23 1 5750-0 900.0981-00 Plug BSPT d1'
24 1 6005-0 Concave CH660 Alternative See section 2d. Concave alternatives
25 2 6007-9 831.0016-00 Compound, Casting kg
26 6 6007-0 840.1074-00 Screw M6S M30x280 8.8 ZP
27 6 6007-4 442.8881-01 Washer
28 6 6007-3 442.8908-01 Hose 31.5-0.6
29 6 6007-2 442.7252-01 Shim
30 6 6007-2 442.7252-02 Shim
31 6 6007-2 442.7252-03 Shim
32 6 6007-2 442.7252-04 Shim
33 4 6008-0 442.9415-00 Plate, Wear CH660 Alternative Only for concave EF
34 6 6020-0 840.1075-00 Screw M6S M30x380 8.8 ZP
35 6 6020-1 845.0284-00 Nut, Lock M30 8 ZP
Fasteners for concave, to
36 6 6020-2 442.7253-01 Sleeve
support ring and topshell
37 6 6020-4 442.7271-01 Washer
38 54 6020-8 863.0058-00 Spring, Disc 90x46x5
39 1 6050-0 442.8793-01 Ring, Support
40 6 6105-0 442.8290-01 Pin, Dowel Dowel for support ring
41 2 5650-6 900.0431-00 Joint, Pipe GE 15-LR
42 1 5681-2 452.4195-001 Pipe, Steel DIN 2391/C-ST 35,4 FZ15x1,5
43 1 6006-0 Spacer Ring CH660 Alternative See section 2e. Filler ring alternatives
Service/Repair kit
1 452.5793-901 Fastener kit for concave and support ring Consists of:
6 6020-0 840.1075-00 Screw M6S 30×380 8.8
6 6020-1 845.0284-00 Nut Lock M30
6 6020-2 442.7253-01 Sleeve
6 6020-4 442.7271-01 Washer
54 6020-8 863.0058-00 Disc spring

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 35

SPC Sandvik CH660:04

2c. Fasteners for topshell

5 4

1 2 3 4

Pos. No. Qty. Cat. No. Part No. Description Remarks

1 20 840.1073-00 Screws M6S 42x220 8.8
2 20 845.0322-00 Nut M6M M42 8 FZB
Fasteners for topshell
3 20 847.0171-00 Washer BRB 43x80 HB 200
4 24 899.0278-00 Protective Cap SW65 2 H20
5 4 442.9530-01 Screw M6S 42x100 Jacking screws

36 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04 452.4218

2d. Concave alternatives

Pos. No. Qty. Cat. No. Part No. Description Remarks

442.8813-01 Ring, Concave CH660: EC M1
442.8813-02 Ring, Concave CH660: EC M2
442.8813-03 Ring, Concave CH660: EC M7
442.9230-01 Ring, Concave CH660: CX M1
442.9230-02 Ring, Concave CH660: CX M2
442.9230-03 Ring, Concave CH660: CX M7
442.8814-01 Ring, Concave CH660: C M1
442.8814-02 Ring, Concave CH660: C M2
442.8814-03 Ring, Concave CH660: C M7
442.8815-01 Ring, Concave CH660: MC M1
442.8815-02 Ring, Concave CH660: MC M2
1 1 6005-0 442.8815-03 Ring, Concave CH660: MC M7
442.8816-01 Ring, Concave CH660: M M1
442.8816-02 Ring, Concave CH660: M M2
442.8816-03 Ring, Concave CH660: M M7
442.8817-01 Ring, Concave CH660: MF M1
442.8817-02 Ring, Concave CH660: MF M2
442.8817-03 Ring, Concave CH660: MF M7
442.8818-01 Ring, Concave CH660: F M1
442.8818-02 Ring, Concave CH660: F M2
442.8818-03 Ring, Concave CH660: F M7
452.0832-001 Ring, Concave CH660: EF M1
452.0832-002 Ring, Concave CH660: EF M2

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 37

SPC Sandvik CH660:04 452.4289

2e. Filler ring alternatives

Pos. No. Qty. Cat. No. Part No. Description Remarks

1 1 442.8823-01 Filler ring MC, M
1 1 442.8863-01 Filler ring MF, F

38 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04

3. Mainshaft

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 39

SPC Sandvik CH660:04 BG00563308

3a. Mainshaft excluding mantle

A A 7 9

4 A-A

6 5

8
1
(Continued)

40 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04 BG00563308

(Continued)
Pos. No. Qty. Cat. No. Part No. Description Remarks
4000 BG00563308 Mainshaft Assembly excluding mantle Consists of:
1 1 442.0275-00 Transportation Rack, Main Shaft CH660/CS660
2 1 4005-0 Mainshaft CH660 Cannot be ordered sepa-
rately
3 1 4025-0 BG00325390 Sleeve, Mainshaft CH/S 660
4 1 4205-1 442.8791-01 Head Nut, Inner CH660/CS660
5 1 4135-0 855.0026-00 Ring, Retaining SgA 100
6 1 4035-0 853.0119-00 Pin CP 25x60 m6
7 1 BG00511165 Cover Mainshaft, CH660/CS660
8 1 – 899.0504-00 Eye Bolt VRS-F-M48 Swivel
9 6 841.0658-00 Screw

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 41

SPC Sandvik CH660:04 BG00563413

3b. Mainshaft including mantle

A A
4 17
12

10
13
3 A-A

14 7
8, 9 11 15
16
1

5 6

18
19
(Continued)

42 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04 BG00563413

(Continued)
Pos. No. Qty. Cat. No. Part No. Description Remarks
4000 BG00563413 Mainshaft Assembly including mantle Consists of:
1 1 4005-0 Mainshaft CH660 Cannot be ordered sepa-
rately
2 1 4175-0 Mantle CH660 Alternative See section 3d. Mantle
alternatives.
3 1 4365-2 831.0016-00 Compound, Casting kg
4 1 BG00511165 Cover Mainshaft CH/S 660/CS660
5 1 4035-0 853.0119-00 Pin CP 25x60 m6
6 1 4135-0 855.0026-00 Ring, Retaining SgA 100
7 1 840.0071-00 Screw M6S M16x65 8.8 ZP
8 11 4365-0 840.0069-00 Screw M6S M16x55 8.8 ZP
9 12 847.0016-00 Washer BRB 17x30 ZP
10 1 4205-0 442.8800-00 Head Nut CH660/CS660 Assembly See section 3c. Head nut
with burning ring.
11 1 4305-0 442.8802-01 Seal, Dust Ring CH660/CS660
12 1 BG00325390 Sleeve, Mainshaft CH660/CS660
13 1 4205-1 442.8791-01 Head Nut, Inner CH660/CS660
14 1 4350-0 442.8801-01 Ring, Retaining CH660/CS660
15 1 4355-0 442.8804-01 Retainer
16 1 4355-1 442.8805-01 Scraper
17 6 841.0658-00 Screw MF6S 10.9 FZB M20x40
18 1 – 899.0504-00 Eye Bolt VRS-F-M48 Swivel
19 1 – 442.0275-00 Rack, Transport

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 43

SPC Sandvik CH660:04 442.8800

3c. Head nut with burning ring

Pos. No. Qty. Cat. No. Part No. Description Remarks

1 1 4205-0 442.8800-00 Head nut with burning ring
2 1 4205-2 452.0269-001 Burning ring
3 2 842.0227-00 Screw SK6SS M12x20

44 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04 452.4219

3d. Mantle alternatives

Pos. No. Qty. Cat. No. Part No. Description Remarks

442.8819-01 Mantle A M1
442.8819-02 Mantle A M2
442.8819-03 Mantle A M7
442.8820-01 Mantle B M1
442.8820-02 Mantle B M2
442.8821-01 Mantle D M1
442.8821-02 Mantle D M2
1 1 4175-0 442.8821-03 Mantle D M7
452.0820-001 Mantle EF M1
452.0820-002 Mantle EF M2
442.9760-01 Mantle HC M1
442.9760-01 Mantle HC M2
452.6027-001 Mantle FlexiFeed B M1
452.6027-002 Mantle FlexiFeed B M2
452.6027-003 Mantle FlexiFeed B M7

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 45

SPC Sandvik CH660:04

This page is intentionally left blank

46 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04

4. Dust collar

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 47

SPC Sandvik CH660:04 452.4151

4a. Dust collar

14 3 12

8 9 10 11
5

4 4 7 13

Pos. No. Qty. Cat. No. Part No. Description Remarks

452.4129-901 Dust collar kit Consists of:
1 1 1400-0 452.4151-001 Dust collar
2 4 1400-1 840.0634-00 Screw M6S 16x25 8.8 ISO 4017
3 1 1401-0 442.8744-01 Ring
4 1 1404-0 853.0464-00 Pin CP m6 12×30 SMS 2374
5 16 1405-0 840.1281-00 Screw M6S 16×80 8.8
6 16 1405-2 847.0016-00 Washer BRB 17×30 HB200 ISO 7089
7 1 1410-0 442.8762-01 Locating bar
8 1 1411-0 442.8809-01 Shim
9 1 1411-0 442.8809-02 Shim
10 1 1411-0 442.8809-03 Shim
11 1 1411-0 442.8809-04 Shim
12 3 1412-0 841.0019-00 Screw MC6S 10×40 12.9
13 1 1430-0 442.8808-01 Gasket
14 1 1450-0 442.8747-01 Seal ring inner
Service/Repair kit
1 452.5799-901 Locating bar kit See section 4b. Locating
bar kit

48 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04

4b. Locating bar kit

Pos. No. Qty. Cat. No. Part number Description Remarks
1 452.5799-901 Locating bar kit Consists of:
1 1410-0 442.8762-01 Locating bar
1 442.8809-01 Shim t=0.1
1 442.8809-02 Shim t=0.5
1411-0
1 442.8809-03 Shim t=0.7
1 442.8809-04 Shim t=1.0
3 1412-0 841.0019-00 Screw MC6S 10×40 12.9

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 49

SPC Sandvik CH660:04

This page is intentionally left blank

50 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04

5. Eccentric

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 51

SPC Sandvik CH660:04 452.4128

5a. Eccentric

6 5
4
8 10

9 3

11

A-A (1:6)

12

A A

(Continued)

52 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04 452.4128

(Continued)
Pos. No. Qty. Cat. No. Part No. Description Remarks
1800 Eccentric Ar. Consists of:
1 1 1805-0 442.8733-01 Eccentric
2 1 1810-0 Eccentric bushing alt. See section 5b. Eccentric
bushing.
3 1 1815-0 442.8729-001 Hub
4 1 1816-0 442.8743-00 Ring
5 8 1817-0 840.0066-00 Screw M6S M16×40 8.8 fzb ISO4017
6 8 1817-2 847.0016-00 Washer BRB 17×30 HB200 ISO 7089
7 1 1820-0 442.9610-01 Key R 28×16×320
8 7 1825-1 841.0028-00 Screw MC6S 12×100 12.9
9 9 1825-0 841.0025-00 Screw MC6S 16×50 12.9
10 16 1825-2 847.0180-00 Washer DIN 137 B 13×24
11 1 1850-0 442.8723-00 Gear and pinion set See section 5c. Gear and
pinion set.
12 1 1855-0 442.8807-01 Key T50×28×75

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 53

SPC Sandvik CH660:04 452.4160

5b. Eccentric bushing

Pos. No. Qty. Cat. No. Part No. Description Remarks

Eccentric bushing Alt. Consists of:
1 1 1810-0 442.8826-01 Eccentric bushing Throw 50-48-44-40
1 1810-0 442.8825-01 Eccentric bushing Throw 40-36-32-28
1 1810-0 442.8824-01 Eccentric bushing Throw 28-24-20-18

54 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04 442.8723

5c. Gear and pinion set

Pos. No. Qty. Cat. No. Part No. Description Remarks

1 442.8723-00 Gear and pinion set As. Consists of:
1 1 Pinion Cannot be orderered sepa-
rately
2 1 Gear

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 55

SPC Sandvik CH660:04

This page is intentionally left blank

56 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04

6. Bottomshell

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 57

SPC Sandvik CH660:04 BG00565178

5a. Bottomshell with rubber liners (standard)

11 14 16 8

P
P (1:10)
C

8
1
G A-A
16 7 6 5 17

2 4, 3 G (1:25)

15

B 13
12 C (1:15)
A A
B (1:10)
7
F 9 10 15
F N (1:5)
E

D (1:10)

F-F N
D

18
(Continued)

58 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04 BG00565178

(Continued)
Pos. No. Qty. Cat. No. Part No. Description Remarks
1000 BG00565178 Bottomshell assembly with rubber liners (standard) Consists of:
1 1 1005-0 Bottomshell CH660/CS660 Cannot be ordered sepa-
rately
2 1 1005-1 BG00575600 Foot CH660/CS660 Assembly See section 6c. Foot
assembly.
3 16 1005-2 840.0669-00 Screw M6S M24x70 8.8 ZP
4 16 1005-3 847.0124-00 Washer BRB 25x45 ZP
7 1 1280-0 853.0464-00 Pin CP 12x30 m6
8 4 843.1650-00 Weld Stud PD M12x25, Steel 4.8
12 8 1885-0 853.0646-00 Spiral pin Prym N 16x45
13 2 1005-5 442.7907-01 Boss
14 1 1320-0 891.1772-901 Rubber lining bottomshell See section 6d. Rubber lin-
ing bottomshell.
15 4 843.1578-00 Screw, Welded PD M12x30 4.8Ni+RF12
16 1 452.5470-901 Arm Shield CH660/CS660 Bottomshell See section 6h. Arm liners.
2 452.0441-001 Clamp
2 452.4862-001 Support accumulator
4 840.0048-00 Screw M6S 12×45 8.8 ISO 4017 Fastener for accumulator.
See Chapter Hydroset sys-
4 847.0059-00 Washer TBRSB 13.5×35 tem
4 840.0650-00 Screw M6S 20×65 8.8 ISO4017
4 847.0132-00 Washer BRB 21×36 HB200
17 1 Temperature Transmitter Alternative CH660/CS660 See section 6i. Tempera-
ture transmitter alternative.
18 1 452.4146-001 Transport frame

Not included in the major parts assembly:

5 1 1015-0 900.2108-00 Elbow A4 Zn Rp 4
6 1 1200-0 442.8742-01 Bottomshell Bushing CH660/CS660
9 1 1285-1 900.1412-00 Pipe R 3/4x70
10 2 1285-4 900.0276-00 Round cap Rp 3/4 Fe
11 1 1880-0 442.8761-01 Eccentric wearing plate

The bottomshell is not fully compatible with versions earlier than CH660:02, without upgrading the Hydroset
system.

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 59

SPC Sandvik CH660:04 BG00565215

6b. Bottomshell with steel wear plates liners (option)

11 14 16 8

P
P (1:10)
C

8
1
G A-A
16 7 6 5 17

2 4, 3 G (1:25)

15

B 13
12 C (1:15)
A A
B (1:10)
7
F 9 10 15
F N (1:5)
E

D (1:10)

F-F N
D

18
(Continued)

60 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04 BG00565215

(Continued)
Pos. No. Qty. Cat. No. Part No. Description Remarks
1000 BG00565215 Bottomshell assembly with steel wear plates liner Consists of:
(option)
1 1 1005-0 Bottomshell CH660/CS660 Cannot be ordered sepa-
rately
2 1 1005-1 BG00575600 Foot CH660/CS660 Assembly See section 6c. Foot
assembly.
3 16 1005-2 840.0669-00 Screw M6S M24x70 8.8 ZP
4 16 1005-3 847.0124-00 Washer BRB 25x45 ZP
7 1 1280-0 853.0464-00 Pin CP 12x30 m6
8 4 843.1650-00 Weld Stud PD M12x25, Steel 4.8
12 8 1885-0 853.0646-00 Spiral pin Prym N 16x45
13 2 1005-5 442.7907-01 Boss
14 1 1320-0 452.7282-901 Steel wear plate lining bottomshell See section 6f. Steel wear
plate lining bottomshell
15 4 843.1578-00 Screw, Welded PD M12x30 4.8Ni+RF12
16 1 452.5470-901 Arm Shield CH660/CS660 Bottomshell See section 6h. Arm liners.
2 452.0441-001 Clamp
2 452.4862-001 Support accumulator
4 840.0048-00 Screw M6S 12×45 8.8 ISO 4017 Fastener for accumulator.
See Chapter Hydroset sys-
4 847.0059-00 Washer TBRSB 13.5×35 tem
4 840.0650-00 Screw M6S 20×65 8.8 ISO4017
4 847.0132-00 Washer BRB 21×36 HB200
17 1 Temperature Transmitter Alternative CH660/CS660 See section 6i. Tempera-
ture transmitter alternative.
18 1 452.4146-001 Transport frame

Not included in the major parts assembly:

5 1 1015-0 900.2108-00 Elbow A4 Zn Rp 4
6 1 1200-0 442.8742-01 Bottomshell Bushing CH660/CS660
9 1 1285-1 900.1412-00 Pipe R 3/4x70
10 2 1285-4 900.0276-00 Round cap Rp 3/4 Fe
11 1 1880-0 442.8761-01 Eccentric wearing plate

The bottomshell is not fully compatible with versions earlier than CH660:02, without upgrading the Hydroset
system.

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 61

SPC Sandvik CH660:04 BG00575600

6c. Foot assembly

3 1

1
2

Pos. No. Qty. Cat. No. Part No. Description Remarks

BG00575600 Foot assembly kit Consists of:
1 2 442.8756-01 Foot As.
2 1 BG00573541 Foot As.
3 1 BG00573452 Foot

62 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04 891.1772

6d. Rubber lining bottomshell

A B

8 9
10
11

7
B (1;5)
A (1;5)
7 1
2
2

10

5 5
6
7

Pos. No. Qty. Cat. No. Part No. Description Remarks

1 1320-0 891.1772-901 Rubber lining bottomshell kit Consists of:
1 1 1320-1 891.1856-901 Protection, Wall
2 3 1320-2 891.1889-901 Protection, Wall
3 1 1320-3 891.1891-901 Protection, Wall
4 1 1320-4 891.1893-901 Protection, Wall
5 3 1320-5 891.1858-901 Protection, Wall
6 1 1320-6 891.1860-901 Protection, Wall
7 2 891.1647-902 Inspection door PU kit
8 4 847.0147-00 Washer round 13x24 ZP
9 20 1321-0 891.2035-901 Bolt and plug set
10 4 891.2035-902 Bolt and plug set
11 4 845.0030-00 Nut, Lock M12 8 ZP

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 63

SPC Sandvik CH660:04 891.2133

6e.Rubber lining kit

3 5

6
5

1
7
2

Rubber lining wall protection kit 891.2133-901

Pos. No. Qty. Cat. No. Part No. Description Remarks
1 891.2133-901 Rubber lining wall protection kit Consists of:
1 1 891.1891-901 Wall protection
2 1 891.1893-901 Wall protection
3 3 891.1858-901 Wall protection
4 1 891.1860-901 Wall protection
5 3 891.1889-901 Wall protection
6 1 891.1856-901 Wall protection
7 20 891.2035-901 Bolt and plug set
8 2 891.2035-902 Bolt and plug set

64 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04 891.2133-901

6f. Steel wear plate lining bottomshell

B
A

6
8 9

B (1:5)
7
A (1:5)
5 4

6
1

6
3

2
7

Pos. No. Qty. Cat. No. Part No. Description Remarks

1 452.7282-901 Steel wear plate lining bottomshell Consists of:
1 1 452.7283-001 Wear Plate
2 1 452.7285-001 Wear Plate
3 1 452.7288-001 Wear Plate
4 1 452.7289-001 Wear Plate
5 1 452.7291-001 Wear Plate
6 24 BG00207523 Bolt set See section 6g. Bolt set.
7 2 891.1647-901 Inspection door PU kit
8 4 847.0147-00 Washer round 13x24 ZP
9 4 845.0030-00 Lock Nut M12 8 ZP

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 65

SPC Sandvik CH660:04 BG00207523

6g. Bolt set

3
1

Pos. No. Qty. Cat. No. Part No. Description Remarks

1 BG00207523 Bolt set Consists of:
1 1 BG00205920 Bolt
2 1 891.2879-001 Soft washer
2 1 891.2880-001 Soft washer
3 1 845.0030-00 Lock nut

66 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04 452.5470-901

6h. Arm liners

Bottomshell arm liner kit 452.5470-901

Pos. No. Qty. Cat. No. Part No. Description Remarks
1 452.5470-901 Bottomshell arm liner kit Consists of:
1 4 BG00277273 Liner narrow arm
2 1 452.5222-001 Liner pinionshaft arm

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 67

SPC Sandvik CH660:04 BG00498892

6i. Temperature transmitter alternative

1
With ASRi or without control system
(no temperature transmitter)

Pos. No. Qty. Cat. No. Part No. Description Remarks

Temperature transmitter alternative
1 1 900.0901-00 Plug R 4 T8 FZV

68 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04

7. Hydroset cylinder

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 69

SPC Sandvik CH660:04 BG00382125

7a. Hydroset cylinder

21
22 19

23
6, 5 C-C
B-B (1:10)
E-E

20
E
15

2, 3

8
E
7
1
10
C
11
C
12

4
17
16 13 14 18, 3
B B

(Continued)

70 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04 BG00382125

(Continued)
Pos. No. Cat. No. Qty. Part No. Description Remarks
2000 BG00382125 Hydroset cylinder Ar. Consists of:
1 2005-0 1 442.8722-01 Hydroset Cylinder CH660/CS660
4 2050-0 1 442.8724-01 Cylinder Bushing CH660/CS660
5 4 840.0019-00 Screw M6S M8x12 8.8 ZP
6 7 847.0012-00 Washer BRB 8,4x16 ZP
7 2205-0 1 442.8758-00 Piston CH660/CS660 Assembly See section 7b. Piston
8 1 853.0119-00 Pin CP 25x60 m6
10 2400-0 1 442.8739-00 Seal, Piston Chevron packing See section 7d. Chevron
packing
11 1 442.8725-01 Clamping Plate
12 2505-0 8 841.0266-00 Screw MC6S M12x25 8.8 ZP
13 2560-0 1 452.4865-001 Hydroset Cylinder Cover
14 1 Position Transmitter Alternative CH660/ CS660 See section 7e. Position
transmitter alternative
15 1 873.1152-00 O-Ring 625,0x7 NBR 70
16 1 873.0838-00 O-Ring 499,3x5,7 NBR 70
17 1 873.1277-00 O-Ring 548x5,7 NBR 70
19 1 900.2302-00 Plug VSTI G 1/2" -ED
20 1 Hydroset Protection Alternative CH660/CS660 See section 7h. Hydroset
protection alternative
21 1 873.0390-00 Seal ring Tredo 30
22 1 900.0659-00 Adapter G 2 BxG 2 B
23 1 900.3279-00 Cap G2-11

Not included in the major parts assembly:

2 21 840.0672-00 Screw M6S 24×100 8.8 ISO 4014
3 39 847.0124-00 Washer BRB 25×45 HB200 SS 3576
9 2260-0 1 BG00259473 Step Bearing Set, CH/S 660 See section 7c. Step bear-
ing set
18 18 840.0674-00 Screw M6S M24x120 8.8 ZP

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 71

SPC Sandvik CH660:04 BG00382125

(Continued)

20

14
With ASRi With protection

20

14
Without ASRi Without protection

Pos. No. Cat. No. Qty. Part No. Description Remarks

14 1 Position Transmitter Alternative See section 7e. Position
CH660/ CS660 transmitter alternative
20 1 Hydroset Protection Alternative See section 7h. Hydroset
CH660/CS660 protection alternative

72 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04 442.8758

7b. Piston

Pos. No. Cat. No. Qty. Part No. Description Remarks

1 442.8758-00 Piston
1 1 442.7559-05 Measuring tube

7c. Step bearing set BG00259473

1
2
3

Pos. No. Cat. No. Qty. Part No. Alternative Description Remarks
1 BG00259473 Step bearing set CH660/CS660 Includes the following
1 1 Main shaft step
2 1 Step washer Sold as a set.
3 1 Piston wearing plate

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 73

SPC Sandvik CH660:04 442.8739

7d. Chevron packing

6 1

5 4 2 3

Pos. No. Cat. No. Qty. Part No. Description Remarks

1 2305-0 1 442.8739-00 Chevron packing
2 2055-0 1 840.0019-00 Screw MC6S 8×12 8.8
3 2055-2 1 847.0012-00 Washer BRB 8.4×16 HB200 ISO 7089
4 2540-1 1 873.1277-00 Seal O-ring 548.0×5.7 SMS 1586
5 2540-0 1 873.0838-00 Seal O-ring 499.3×5.7 SMS 1586
6 2401-0 8 841.0266-00 Screw MC6S 12×25 8.8

74 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04 BG00497035

7e. Position transmitter alternative

Pos. No. Cat. No. Qty. Part No. Description Remarks

Position transmitter alternative
1 1 Position Transmitter Plug See section 7f. Position
transmitter plug
2 1 442.8790-00 Position Transmitter Assembly-ASRi CH660/ CS660 See section 7g. Position
B1N transmitter assembly ASRi

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 75

SPC Sandvik CH660:04 BG00496918

7f. Position transmitter plug

2
4, 3

Pos. No. Cat. No. Qty. Part No. Description Remarks

Position transmitter plug
1 1 442.8783-01 Plug
2 1 873.0111-00 O-Ring 44,2x3,0 NBR 70
3 6 847.0012-00 Washer BRB 8,4x16 ZP
4 6 840.0023-00 Screw M6S M8x25 8.8 ZP
5 4 840.0019-00 Screw M6S M8x12 8.8 ZP

76 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04 442.8790

7g. Position transmitter assembly ASRi

1
3 7 5

6, 5

Pos. No. Cat. No. Qty. Part No. Description Remarks

1 442.8790-00 Position transmitter assembly ASRi kit Consists of:
1 1 984.0623-00 Position sensor 300 mm, 5-pin
2 1 873.0111-00 O-Ring 44,2x3,0 NBR 70
3 6 841.0012-00 Screw M6S M8x40 8.8 ZP
4 2 442.8785-00 Guard
5 3 847.0012-00 Washer BRB 8,4x16 ZP
6 3 840.0021-00 Screw M6S M8x20 8.8 ZP
7 1 194.0565-003 Prewired cable, Plug Canon M12 Male 5P 3m

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 77

SPC Sandvik CH660:04 BG00523132

7h. Hydroset protection alternative

2
1

Pos. No. Cat. No. Qty. Part No. Description Remarks

Hydroset protection alternative
1 1 BG00528949 Hydroset Protection CS660 See section 7i. Hydroset
protection
2 1 Hydroset Protection, Screws CH660/CS660 See section 7j. Hydroset
protection screws

78 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04 BG00528949

7i. Hydroset protection

55 55 77 22 99 11
66
44
88
11

33

Pos. No. Cat. No. Qty. Part No. Description Remarks

1 BG00528949 Hydroset protection kit Consists of:
1 2 BG00437388 Bracket
2 1 BG00438540 Bracket
3 1 BG00520816 Skirt
4 10 840.0045-00 Screw M6S M12x30 8.8 ZP
5 23 847.0147-00 Washer 13x24 ZP
6 13 840.0047-00 Screw M6S M12x40 8.8 ZP
7 13 845.0030-00 Nut, Lock M12 8 ZP
13 847.0118-00 Washer S4B 13,5x40
1 BG00528950 Skirt

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 79

SPC Sandvik CH660:04 BG00523117

7j. Hydroset protection screws

Pos. No. Cat. No. Qty. Part No. Description Remarks

Hydroset protection screws kit Consists of:
1 12 840.0045-00 Screw M6S M12x30 8.8 ZP
2 12 847.0147-00 Washer 13x24 ZP

80 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04

8. Hydroset system

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 81

SPC Sandvik CH660:04 BG00347975

8a. Hydroset system

With ASRi

3 1

20
B-B
15

A (1:5)
5

6
4

7
9
8
10
B
A
B 16, 17 2

19 11, 12, 13, 14

18

21

(Continued)

82 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04 BG00347975

(Continued)
Pos.No. Cat. No. Qty. Part No. Description Remarks
8000 Hydroset system CH660 Consists of:
1 2 BG00368225 Check Valve See section 8b. Check
valve.
2 2 BG00464502 Cover CH660/CS660 See section 8c. Cover.
3 1 900.2279-00 Plug VSTI G 1/4" -ED
4 2 452.4862-001 Support Accumulator
5 1 Accumulator Alternative CH660 See section 8d. Accumula-
tor alternative.
6 2 452.0441-001 Clamp
7 4 847.0059-00 Washer TBRSB 13,5x36 ZP
8 4 840.0048-00 Screw M6S M12x45 8.8 ZP
9 4 847.0132-00 Washer round 21x36 ZP
11 1 873.0385-00 Seal ring Tredo 20 3/4
12 1 900.0655-00 Adapter G 3/4 BxG 3/4 B
13 1 900.0964-00 Adapter G 3/4 BxG 3/4 Swivel
14 1 900.0276-00 Cap Round Rp 3/4 Fe
15 4 840.0076-00 Screw M6S M20x40 8.8 ZP
16 4 873.0390-00 Seal ring Tredo 30
17 2 900.0659-00 Adapter G 2 BxG 2 B
18 2 BG00573555 Hydraulic Hose 2"
19 2 900.2265-00 Plug VSTI G 3/4'' -ED
20 1 900.2279-00 Plug VSTI G 1/4" -ED
21 2 819.0061-00 Cable Protection L=1,6

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 83

SPC Sandvik CH660:04 BG00368225

8b. Check valve

9 8

7
4
6
5

2 1

A-A

A A

Pos. No. Cat. No. Qty. Part No. Description Remarks

1 BG00368225 Check valve Consists of:
1 1 BG00368222 Connection
2 1 442.6407-01 Seat
3 1 442.6403-01 Valve
4 1 127.0004-30 Spring
5 1 442.6406-01 Body, Valve
6 2 873.0130-00 O-Ring 114,3x5,7
7 1 442.6405-01 Guide, Valve
8 1 442.6402-01 Flange
6 840.0532-00 Screw M6S M20x110 8.8 ZP

84 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04 BG00464502

8c. Cover

7
2 8 3
4
1 5 7

Pos. No. Cat. No. Qty. Part No. Description Remarks

1 BG00464502 Cover Consists of:
1 1 BG00353817 Bracket
2 1 BG00525698 Bracket
3 4 BG00353824 Clamping bar
4 2 BG00353819 Rubber Protection
5 8 841.0432-00 Screw MF6S M10x25 8.8
6 2 840.0045-00 Screw M6S M12x30 8.8 ZP
7 4 847.0147-00 Washer 13x24 ZP
8 2 845.0007-00 Nut M6M M12 8 ZP

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 85

SPC Sandvik CH660:04 919.0243

8d. Accumulator alternative

1
2

Pos. No. Cat. No. Qty. Part No. Description Remarks

1 2 919.0243-00 Accumulator complete 20 l Uncharged 0.2 Mpa
2 919.0205-00 Bladder Spare part included in
accumulator
2 1 919.0125-00 Charging equipment FP Unit

The accumulator is delivered uncharged. Use the Charging equipment FP

Unit to charge.
Charging pressure:
• 4.2 MPA Without ASR/ With ASR Plus
• 6.0 MPA With ASRi

86 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04

9. Pinionshaft housing

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 87

SPC Sandvik CH660:04 BG00598827

9a. Pinionshaft housing

12 18 1 6, 5, 4 2, 3 19, 20
13

9
22

29 11
A 16, 17
8
9 10 7

26
11
27
A (1;4)
14, 15 28

24 21
23
34, 33
32

31

30
25
(Continued)

88 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04 BG00598827

(Continued)
Pos. No. Qty. Cat. No. Part No. Description Remarks
3000 BG00598827 Pinionshaft housing assembly Consists of:
1 1 3005-0 442.8764-01 Pinion shaft housing CH660/CS660
7 1 3070-1 868.0799-00 Bearing22224 E
8 1 3070-2 868.0806-00 Bearing452324 M2/W502
9 2 3090-1 442.8771-01 Spacer
10 2 3120-1 873.0128-00 O-ring 109,7x5,7 NBR 70
11 2 3170-1 873.1161-00 Oil seal ring Type 4 150x180x15
12 1 3190-1 442.8766-01 Bearing cover
13 1 3190-2 442.8765-01 Bearing cover
14 6 3210-0 840.0035-00 Screw M6S 10x25 8.8
15 6 3210-2 847.0144-00 Washer BRB 10,5x22 ZP
16 6 3220-0 840.0067-00 Screw M6S 16x45 8.8 ZP
17 6 3220-2 847.0016-00 Washer BRB 17x30 ZP
18 1 3240-1 442.8775-01 Gasket
19 1 3240-2 442.8774-01 Gasket
20 1 3240-2 442.8774-02 Gasket
21 1 3330-0 853.0590-00 Spring Pin Prym N 8x28
22 1 3505-0 442.8772-01 Pinion shaft CH660/CS660
23 1 3515-0 857.0350-00 Key TK 25x14x95
24 1 3575-0 900.0022-00 Elbow A4 Zn DN20 zinced
25 1 3585-0 900.2026-00 Magnetic plug 0606-12
26 1 3590-0 442.8778-01 Oil level plug
27 2 3590-1 873.0108-00 O-ring 34,2x3,0 NBR 70
28 1 3590-2 442.7578-01 Oil Level Pipe
29 1 3650-0 855.0132-00 Retaining ring SgA 110
32 1 3555-0 857.0336-00 Key T 28x16x110
33 1 3575-2 900.0655-00 Adapter G 3/4 BxG 3/4 B
34 1 3575-1 842.0020-00 Screw SK6SS 20x25

Not included in the major parts assembly:

2 8 1505-0 840.0072-00 Screw M6S 16x70 8.8
3 8 1505-2 847.0060-00 Washer TBRSB 17x42
4 1 3030-0 442.8803-01 Gasket
5 1 3030-0 442.8803-02 Gasket
6 1 3030-0 442.8803-03 Gasket
30 2 3710-0 840.1063-00 Screw M6S M16x120H 8.8 ZP
31 2 3710-2 845.0009-00 Nut M6M M16 8 ZP

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 89

SPC Sandvik CH660:04 452.5576

9b. Pinionshaft housing repair kit

Pos. No. Qty. Cat. No. Part number Description Remarks
452.5576-901 Pinionshaft housing repair kit Consists of:
1 442.8803-01 Gasket T=0.5
1 3030-0 442.8803-02 Gasket T=0.8
1 442.8803-03 Gasket T=1.5
1 3070-1 868.0799-00 Bearing
1 3070-2 868.0806-00 Bearing
2 3090-1, -2 442.8771-01 Spacer
2 3120-1, -2 873.0128-00 O-ring
2 3170-1, -2 873.1161-00 Sealing ring
1 3240-1 442.8775-01 Gasket
1 3240-2 442.8774-01 Gasket
1 3240-2 442.8774-02 Gasket
1 3585-1 873.0385-00 Sealing Ring Tredo No. 20
2 3590-1 873.0108-00 O-ring

90 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04

10. Hoses

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 91

SPC Sandvik CH660:04 BG00491525

10a. Hoses assembly

1 L
5
2 M

3 N

4 Q

Pos. No. Cat. No. Qty. Part No. Description Remarks

Hoses assembly CH660/CS660 Consists of:
1 1 BG00501792 Return Oil Hose 4" See section 10b. Hose.
2 1 650.0093-32 Hydraulic hose
3 1 BG00496465 Hydraulic Hose 3/4"
4 1 650.0089-28 Hose SAE 100R1AT R3/4"x2000
5 1 Adapter Alternative CH660/CS660 See section 10c. Adapter
kit alternative.

* For information about how to connect the hoses, see the installation drawing.

10b. Hose BG00501792

3 1 2

Pos. No. Cat. No. Qty. Part No. Description Remarks

1 BG00501792 Return Oil Hose 4" Consists of:
1 1 900.2090-00 Clip, Hose clip SC d 113-121
2 1 650.0326-25 Hose 4"x2500
3 1 442.2549-01 Connection

92 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04 BG00505402

10c. Adapter kit alternative

1 BSP
L

2 JIC
L

Pos. No. Cat. No. Qty. Part No. Description Remarks

Adapter kit alternative Consists of:
1 1 BG00505401 Adapterkit BSP CH660/CS660 See section 10d. Adapter
kit JIC.
2 1 BG00505400 Adapterkit JIC CH660/CS660 See section 10e. Adapter
kit BSP.

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 93

SPC Sandvik CH660:04 BG00505400

10d. Adapter kit JIC

Crusher hoses Tank

L

Cooler Cooler
1 outlet inlet 2
M

3 4 5 5 4 3 6
N

7 7 8
Q

7 7 8

Pos. No. Cat. No. Qty. Part number Description Remarks

1 BG00505400 Adapter kit JIC Consists of:
1 1 442.9830-01 Coupling, Hose 4"
2 1 442.9831-01 Adapter R4xNPT4
3 2 900.2321-00 Adapter JIC 2++xG 2 B
4 2 900.2429-00 Adapter JIC 2 1/2"xG 1 1/2" B
5 2 873.0388-00 Seal ring Tredo 28
6 1 873.0390-00 Seal ring Tredo 30
7 4 900.2316-00 Adapter JIC 1 1/16xG3/4 B
8 2 873.0385-00 Seal ring Tredo 20 3/4

94 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04 BG00505401

10e. Adapter kit BSP

Crusher hoses Tank

L

Cooler Cooler
1 outlet inlet
M

N 2 4 5 5 4 2 6

3 3 7
Q

3 3 7

Pos. No. Cat. No. Qty. Part number Description Remarks

1 BG00505401 Adapter kit BSP Consists of:
1 1 442.2549-01 Connection
2 2 900.0659-00 Adapter G 2 BxG 2 B
3 4 900.0655-00 Adapter G 3/4 BxG 3/4 B
4 2 900.2161-00 Adapter G 2 BxG 1 1/2 B
5 2 873.0388-00 Seal ring Tredo 28
6 1 873.0390-00 Seal ring Tredo 30
7 2 873.0385-00 Seal ring Tredo 20 3/4

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 95

SPC Sandvik CH660:04

This page is intentionally left blank

96 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04

11. Overpressure unit

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 97

SPC Sandvik CH660:04 452.7794

11a. Overpressure unit

1 3 4 2

1 12 10 8 5 6

11 8 8 7 9 9
A (1:5) 13

Pos. No. Qty. Part No. Alternative Description Remarks

Overpressure unit
1 Overpressure unit See section 11b. Overpressure unit.
2 Overpressure connection See section 11g. Overpressure connec-
tion.

98 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04 452.7884

11b. Overpressure unit

Pos. No. Qty. Part No. Alternative Description Remarks

Overpressure unit alternatives Consists of:
1 Overpressure unit - Fan See section 11c. Overpressure unit -
Fan.
2 452.7870-902 Overpressure unit - Compressed air See section 11f. Overpressure unit -
Compressed air.

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 99

SPC Sandvik CH660:04 452.7870-901

11c. Overpressure unit - Fan

1 3 2

Pos. No. Qty. Part No. Alternative Description Remarks

Overpressure unit - Fan Consists of:
1 1 Overpressure fan SV 5.133/2 400V50Hz See section 11d. Overpressure fan.
2 1 819.0345-00 Hose w. steel spiral L=5meter
3 2 900.2283-00 Hose clip 45-50mm
4 1 452.8006-901 Filter FK 1500 assy See section 11e. Filter.

100 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04 452.7245

11d. Overpressure fan

5 4 2 3 1

Pos. No. Qty. Part No. Alternative Description Remarks

Overpressure fan Consists of:
1 1 906.0644-00 Overpressure fan SV 5. 133/2
2 4 840.0021-00 Screw M6S M8x20 8.8 ZP
3 1 126.0675-001 Sign M8
4 1 900.1427-00 Hose coupling R1 1/2
5 1 900.0155-00 Bushing N4 Zn DN40/25 zinced
972.1283-00 Motor W22 71-2B5-0,55 4 400VD50
972.1297-00 Motor W22 71-2B5-0,55 4 460V60
6 1
972.1314-00 Motor W22 71-2B5-0,55 4 575V60
972.1328-00 Motor W22 71-2B5-0,55 4 525V50

Overpressure fan assemblies

452.7245-901 Overpressure fan with 400VD50 motor
452.7245-902 Overpressure fan with 460V60 motor
1 452.7245-903 Overpressure fan with 575V60 motor
452.7245-904 Overpressure fan with 525V50 motor
452.7245-905 Overpressure fan without motor

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 101

SPC Sandvik CH660:04 452.8006

11e. Filter

Pos. No. Qty. Part No. Alternative Description Remarks

1 452.8006-901 Filter assembly Consists of:
1 1 452.7581-001 Adapter
2 1 912.0373-00 Air filter FK1500 complete
1 912.0374-00 Filter spare part
3 1 126.0843-001 Sign FU5

102 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04 452.7870-902

11f. Overpressure unit - Compressed air

1 3 2 4 7

8 5 6 9 10

Pos. No. Qty. Part No. Alternative Description Remarks

1 452.7870-902 Overpressure unit - Compressed air Consists of:
1 1 900.0180-00 Nipple ISO49 N8 1/2x1/4
2 1 900.0169-00 Hexagon nipple N8 DN8/8 zinced
3 1 912.0113-00 Air filter 504-2S 5 Micron
4 1 902.0645-00 Regulator 216-2-8
5 1 900.0182-00 Nipple ISO49 N8 3/4x1/4
6 1 900.0054-00 T-pipe 3/4x3/8 B1
7 1 900.0209-00 Plug R 3/8 ISO 49 T8 FZV
8 1 126.0678-901 Set of signs
9 1 900.0648-00 Adapter G 1 BxG 3/4 B
10 1 900.0284-00 Socket RP 1 Zn

11g. Overpressure connection 452.7880

1
1

Pos. No. Qty. Part No. Alternative Description Remarks

Overpressure connection
1 1 452.7839-903 Overpressure connection STD See section 11h. Overpressure connec-
tion STD.

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 103

SPC Sandvik CH660:04 452.7839

11h. Overpressure connection STD

1 3 4 2

1 12 10 8 5 6

11 8 8 7 9 9
A (1:5) 13

Pos. No. Qty. Part No. Alternative Description Remarks

1 452.7839-903 Overpressure connection STD Consists of:
1 2 900.1425-00 Hose coupling R 1" d=25
2 1 819.0344-00 Hose 1" PVC w. steel spiral L = 15 m
3 2 900.1359-00 Hose clip 32
4 4 900.1140-00 Clip RSGU D32 1.32/15
5 1 900.0042-00 T-Pipe 1 B1
6 1 900.0212-00 Plug R 1 T8 FZV
7 1 900.0648-00 Adapter G 1 BxG 3/4 B
8 3 873.0385-00 Seal ring Tredo 20 3/4
9 2 873.0386-00 Seal ring Tredo 23
10 1 902.1190-00 Flow valve M/840 G 3/4"
11 1 900.1158-00 Socket reducing Rp 1x3/4
12 1 900.0655-00 Adapter G 3/4 BxG 3/4 B
13 1 900.0145-00 Bushing N4 Zn DN25/20 zinced

104 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04

12. Drive alternatives

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 105

SPC Sandvik CH660:04 452.4417

12a. Drive alternatives

(Continued)

106 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04 452.4417

(Continued)
Pos. No. Qty. Cat. No. Part No. Description Remarks
Drive alternatives
1 1 V-Belt Drive See section 12b. V-belt drive
2 1 452.4467-901 Rubber damper See section 12p. Rubber dampers.

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 107

SPC Sandvik CH660:04 452.4420

12b. V-belt drive

19 18 20 4

14

8
28 27 29

25 13

1 9 7 8 10 11 12 26 16 17 15

2 3
22

21
6
24

23

A (1:4)

(Continued)

108 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04 452.4420

(Continued)
Pos. No. Qty. Cat. No. Part No. Description Remarks
CH660 V-belt drive
1 1 453.0551-00 Subframe
2 1 453.0479-90 Bracket, Motor
3 1 453.0479--91 Bracket, Motor
4 1 Motor alt. See section 12c. Motor alternative
5 1 Cover, V-Belt Alternative See section 12d. Cover, V-belt alter-
native
6 1 Drive Alt. See section 12i. Drive Alt.
7 1 847.0122-00 Washer TBRB 40x68 ZP
8 4 840.0714-00 Screw M6S M36x140 8.8
9 4 845.0273-00 Nut, Lock Low M36 8 ZP
10 1 443.3948-01 Bracket
11 2 840.0045-00 Screw M6S M12x30 8.8 ZP
12 2 845.0030-00 Nut, Lock M12 8 ZP
13 8 649.0168-01 Supporting cleat
14 4 873.0718-00 Strip 2254 50x30 L=2,0 m
15 16 847.0132-00 Washer round 21x36 ZP
16 8 840.0080-00 Screw M6S M20x80 8.8 ZP
17 8 845.0203-00 Nut, Lock high M20 8 ZP
18 12 847.0144-00 Washer BRB 10,5x22x2 ZP
19 6 840.0039-00 Screw M6S M10x45 8.8 ZP
20 6 845.0213-00 Nut, Lock high M10 8 ZP
21 1 984.0217-00 Sensor SIH-3010-BPKG
22 1 452.4570-001 Bracket speed sensor
23 2 847.0012-00 Washer BRB 8,4x16 ZP ISO
24 2 840.0021-00 Screw M6S M8x20 8.8 ZP
25 2 452.4582-901 Damper, Vibration large See section 12n. Rubber damper
large
26 4 452.4584-901 Damper, Vibration small See section 12o. Rubber damper
small
27 8 847.0124-00 Washer BRB 25x45 ZP
28 2 840.0676-00 Screw M6S M24x140 8.8 ZP
29 2 845.0216-00 Nut, Lock Low M24 8 ZP

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 109

SPC Sandvik CH660:04 BG00523197

12c. Motor alternative

Pos. No. Qty. Part No. Alternative Description Remarks Wear part
Electric Motor Alternative CH660,CS660
1 1 972.1420-00 Electric Motor 315 kW
W22-355-315-4-B3T
380-415/660-690V 50Hz // 460V 60Hz
2 1 972.1440-00 Electric Motor 315 kW
W22-355-315-4-B3T
575V 60Hz
3 1 972.1899-00 Electric Motor 315 kW
W22-355-315-4-B3T
380V 60Hz
4 1 972.1888-00 Electric Motor 315 kW
W22-355-315-4-B3T
525V 50Hz

110 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04 452.4867

12d. Cover, V-belt alternative

3
4

1 2

Pos. No. Qty. Cat. No. Part No. Description Remarks

Cover, V-belt alternative
1 443.3612-91 Cover, V-belt Left See section 12e. Cover, V-belt Left
2 443.3612-00 Cover, V-belt Right See section 12f. Cover, V-belt Right
1
3 BG00300671 Cover, V-belt 8V Left See section 12g. Cover, V-belt 8V Left
4 BG00300669 Cover, V-belt 8V Right See section 12h. Cover, V-belt 8V Right

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 111

SPC Sandvik CH660:04 443.3612-91

12e. Cover, V-belt Left

13
12 1

B (1:2) 14

B
11 9 10

A-A (1:20)
3 4 5 8

7 6 5 2

A A

Pos. No. Qty. Cat. No. Part No. Description Remarks

1 443.3612-91 Cover, V-belt Left Consists of:
1 1 443.3612-92 Cover, V-Belt Left
2 1 443.3614-00 Bracket
3 2 443.3212-01 Bracket
4 2 443.3212-92 Bracket
5 8 847.0144-00 Washer BRB 10,5x22x2 ZP
6 2 840.0036-00 Screw M6S M10x30 8.8 ZP
7 2 845.0213-00 Nut, Lock high M10 8 ZP
8 4 840.0035-00 Screw M6S M10x25 8.8 ZP
9 26 847.0012-00 Washer BRB 8,4x16 ZP
10 13 840.0021-00 Screw M6S M8x20 8.8 ZP
11 13 845.0205-00 Nut, Lock high M8 8 ZP
12 1 BG00298127 Lid
13 4 BG00300483 Screw modified Ø2,5 hole
14 4 853.0231-00 Split pin SP 2,5x20 SMS66

112 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04 443.3612-00

12f. Cover, V-belt Right

13
12 1

B (1:2)
14

9
10
11
A-A (1:20)

8 5 4 3

7 6 5 2
A A

Pos. No. Qty. Cat. No. Part No. Description Remarks

1 443.3612-00 Cover, V-belt Right Consists of:
1 1 443.3612-90 Cover, V-Belt Right
2 1 443.3614-00 Bracket
3 2 443.3212-01 Bracket
4 2 443.3212-92 Bracket
5 8 847.0144-00 Washer BRB 10,5x22x2 ZP
6 2 840.0036-00 Screw M6S M10x30 8.8 ZP
7 2 845.0213-00 Nut, Lock high M10 8 ZP
8 4 840.0035-00 Screw M6S M10x25 8.8 ZP
9 26 847.0012-00 Washer BRB 8,4x16 ZP
10 13 840.0021-00 Screw M6S M8x20 8.8 ZP
11 13 845.0205-00 Nut, Lock high M8 8 ZP
12 1 BG00298127 Lid
13 4 BG00300483 Screw modified Ø2,5 hole
14 4 853.0231-00 Split pin SP 2,5x20 SMS66

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 113

SPC Sandvik CH660:04 BG00300671

12g. Cover, V-belt 8V Left

13
12 1

B (1:2) 14

B
11 9 10

A-A (1:20)
3 4 5 8

7 6 5 2

A A

Pos. No. Qty. Cat. No. Part No. Description Remarks

1 BG00300671 Cover, V-belt 8V Left Consists of:
1 1 BG00300670 Cover, V-Belt 8V Left
2 1 443.3614-00 Bracket
3 2 443.3212-01 Bracket
4 2 BG00301483 Bracket
5 8 847.0144-00 Washer BRB 10,5x22x2 ZP
6 2 840.0036-00 Screw M6S M10x30 8.8 ZP
7 2 845.0213-00 Nut, Lock high M10 8 ZP
8 4 840.0035-00 Screw M6S M10x25 8.8 ZP
9 26 847.0012-00 Washer BRB 8,4x16 ZP
10 13 840.0021-00 Screw M6S M8x20 8.8 ZP
11 13 845.0205-00 Nut, Lock high M8 8 ZP
12 1 BG00298127 Lid
13 4 BG00300483 Screw modified Ø2,5 hole
14 4 853.0231-00 Split pin SP 2,5x20 SMS66

114 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04 BG00300669

12h. Cover, V-belt 8V Right

13
12 1

B (1:2)
14

9
10
11
A-A (1:20)

8 5 4 3

7 6 5 2
A A

Pos. No. Qty. Cat. No. Part No. Description Remarks

1 BG00300669 Cover, V-belt 8V Right Consists of:
1 1 BG00300668 Cover, V-Belt 8V Right
2 1 443.3614-00 Bracket
3 2 443.3212-01 Bracket
4 2 BG00301483 Bracket
5 8 847.0144-00 Washer BRB 10,5x22x2 ZP
6 2 840.0036-00 Screw M6S M10x30 8.8 ZP
7 2 845.0213-00 Nut, Lock high M10 8 ZP
8 4 840.0035-00 Screw M6S M10x25 8.8 ZP
9 26 847.0012-00 Washer BRB 8,4x16 ZP
10 13 840.0021-00 Screw M6S M8x20 8.8 ZP
11 13 845.0205-00 Nut, Lock high M8 8 ZP
12 1 BG00298127 Lid
13 4 BG00300483 Screw modified Ø2,5 hole
14 4 853.0231-00 Split pin SP 2,5x20 SMS66

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 115

SPC Sandvik CH660:04 452.4443

12i. Drive Alt.

1
A 4

A
A-A

Pos. No. Qty. Cat. No. Part No. Description Remarks

Drive alt.
1 1 V-belt drive SPC 50 Hz See section 12j. V-belt drive SPC
50 Hz 4-pole
2 1 V-belt drive SPC 60 Hz See section 12k. V-belt drive SPC
60 Hz 4-pole
3 1 V-belt drive 8V 60Hz See section 12l. V-belt drive 8V
60 Hz 4-pole
4 1 442.9969-00 Spacer See section 12m. Spacer

116 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04 452.4749

12j. V-belt drive SPC 50 Hz 4-pole

B 11
9
5
2
11
A 7
4
8 3
B
10 6

B-B (1:5)
10 A-A (1:5)
A

Motor

Crusher

Pos. No. Qty. Part number Alternative Description Remarks

V-belt drive SPC 50 Hz
1 1 452.7737-901 V-belt pulley 500 MTG125 12×SPC
2 1 869.0286-00 Bushing MGT No. 125, Di=110
869.0261-00 Di=80
869.0278-00 Di=85
869.0295-00 Di=90
869.0283-00 Di=95
3 1 869.0235-00 Di=100 Bushing MGT No. 125
869.0286-00 Di=110
869.0411-00 Di 3 3/8
869.0410-00 Di 3 5/8
869.0314-00 Di 3 7/8
4 1 857.0336-00 Key T 28×16×110 SMS 2307
5 1 442.8788-01 Spacer
6 1 442.8787-01 Washer
7 1 847.0016-00 Washer BRB 17×30 ISO 7089
8 1 840.0066-00 Screw M6S M16×40 8.8 FZB ISO4017
9 1 879.0499-00 V-belt pulley 400 MGT 125 12×SPC
10 12 875.0246-00 V-belt SPC 3150
11 4 Screw MC6S M20x70 12.9 Included in bushings

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 117

SPC Sandvik CH660:04 452.4750

12k. V-belt drive SPC 60 Hz 4-pole

B
11
9
5
2
A
11
7
B
4 3
8
10
6
A B-B (1:5)
10
A-A (1:5)

Motor

Crusher

Pos. No. Qty. Part number Alternative Description Remarks

1 V-belt drive SPC 60 Hz
1 1 452.7741-901 V-belt pulley 560 MTG125 12×SPC
2 1 869.0286-00 Bushing MGT No. 125, Di=110
869.0261-00 Di=80
869.0278-00 Di=85
869.0295-00 Di=90
869.0283-00 Di=95
3 1 869.0235-00 Di=100 Bushing MGT No. 125
869.0286-00 Di=110
869.0411-00 Di 3 3/8
869.0410-00 Di 3 5/8
869.0314-00 Di 3 7/8
4 1 857.0336-00 Key T 28×16×110 SMS 2307
5 1 442.8788-01 Spacer
6 1 442.8787-01 Washer
7 1 847.0016-00 Washer BRB 17×30 HB200 ISO 7089
8 1 840.0066-00 Screw M6S M16×40 8.8 FZB ISO4017
9 1 879.0509-00 V-belt pulley 375 MGT125 12×SPC
10 12 875.0246-00 V-belt SPC 3150
11 4 Screw MC6S M20x70 12.9 Included in bushings

118 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04 452.4751

12l. V-belt drive 8V 60 Hz 4-pole

B
11
9
1 6
A
8
4
B 2
5
10 11
3
B-B (1:5)
A
10
A-A (1:5)

Motor

Crusher

Pos. No. Qty. Part number Alternative Description Remarks

1 V-belt drive 8V 60Hz
1 1 869.0286-00 Bushing MGT125 Di 110
2 1 857.0336-00 Key T 28×16×110
3 1 442.8787-01 Washer
4 1 847.0016-00 Washer BRB 17×30 HB200 ISO 7089
5 1 840.0066-00 Screw M6S M16×40 8.8 fzb ISO4017
7 1 452.7743-901 V-belt pulley 560 MGT125 12x8V
869.0261-00 Di=80
869.0278-00 Di=85
869.0295-00 Di=90
869.0283-00 Di=95
8 1 869.0235-00 Di=100 Bushing MGT No. 125
869.0286-00 Di=110
869.0411-00 Di 3 3/8
869.0410-00 Di 3 5/8
869.0314-00 Di 3 7/8
9 1 879.0820-00 V-Belt Pulley 375 MGT125 12x8V
10 12 875.0331-00 V-belt 8V 1250 Standard C-C 856
6 1 442.8788-01 Spacer
11 4 Screw MC6S M20x70 12.9 Included in bushings

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 119

SPC Sandvik CH660:04 452.9969

12m. Spacer

2 1

5 4

Pos. No. Qty. Part number Alternative Description Remarks

1 442.9969-00 CH66/CS660 Spacer Consists of:
1 1 840.0066-00 Screw M6S M16x40 8.8 fzb
2 1 847.0016-00 Washer BRB 17x30 HB200
3 1 442.8787-02 Washer 2142-50, D134/18x15
4 1 442.8832-03 Spacer
5 1 857.0336-00 Key T 28x16x110

120 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04 452.4582

12n. Rubber damper large

Pos. No. Qty. Cat. No. Part No. Description Remarks

1 452.4582-901 Rubber damper large kit Consists of:
1 1 442.5904-01 Fixing Plate
2 1 864.0066-00 Rubber compression mounting
3 4 840.1135-00 Screw M6S 20×35 8.8 ISO 4017
4 12 847.0132-00 Washer BRB 21×36 HB200 SS 3576
5 4 840.0078-00 Screw M6S 20×60 8.8 ISO 4017
6 4 845.0203-00 Nut Lock ISO 7040 M20 8 FZB

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 121

SPC Sandvik CH660:04 452.4584

12o. Rubber damper small

Pos. No. Qty. Cat. No. Part No. Description Remarks

1 452.4584-901 Rubber damper small kit Consists of:
1 1 442.9833-01 Mounting plate
2 4 840.0044-00 Screw M6S 12×25 8.8 ISO 4017
3 12 847.0147-00 Washer BRB 13×24 HB200 ISO 7089
4 1 864.0080-00 Vibration damper SAW 150 A
5 4 840.0049-00 Screw M6S 12×50 8.8 ISO 4014
6 4 845.0030-00 Lock nut M12 8 FZB ISO 7040

122 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04 452.4467

12p. Rubber dampers (if no subframe)

Pos. No. Qty. Cat. No. Part No. Description Remarks

1 Rubber dampers Consists of:
1 4 452.4583-901 Rubber damper large single screw See section 12q. Rubber damper
large single screw

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 123

SPC Sandvik CH660:04 452.4583

12q. Rubber damper large single screw

2
3

Pos. No. Qty. Cat. No. Part No. Description Remarks

1 452.4583-901 Rubber damper large single screw kit Consists of:
1 1 845.0273-00 Lock Nut M6MN 36 8
2 1 847.0162-00 Washer BRB 37×68 HB200 ISO 7089
3 1 442.9781-00 Top plate
4 1 864.0066-00 Rubber compression mounting
5 4 840.1135-00 Screw M6S 20×35 8.8 ISO 4017
6 8 847.0132-00 Washer BRB 21×36 HB200 SS 3576
7 1 442.5904-01 Fixing Plate
8 4 840.1169-00 Screw M6S 20×30 8.8 ISO 4017

124 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04

13. Sign board

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 125

SPC Sandvik CH660:04 452.4548

13a. Sign board

2
2
4fl

4
fl
5
5

6 6
2

fl
2

1 2

9
fi
3
1

8


7 A (2:25) 
3

(Continued)

126 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04 452.4548

(Continued)
Pos. No. Qty. Cat. No. Part No. Description Remarks
1 452.4548-901 Sign board Consists of:
1 1 126.0383-001 Risk of crushing
2 4 126.0384-001 Warning flying fragments
3 1 126.0385-001 Warning sign read manual
4 2 126.0445-001 SANDVIK logotype silver 140×385
5 2 126.0416-001 Sign product name
6 4 885.0249-00 Sign to mark center of gravity
7 1 126.5007-01 Identification plate
8 1 885.0267-00 Warning sign Danger
9 4 885.0262-00 Lifting plate chain

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 127

SPC Sandvik CH660:04

This page is intentionally left blank

128 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04

14. Tool kit

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 129

SPC Sandvik CH660:04 BG00373424

14a. Tool box

1 16 7 15

6
8
10 11 12 13 14

5
2

Pos. No. Qty. Part No. Description Remarks

1 BG00373424 Tool kit Consists of:
1 1 442.9476-00 Tool box 866x366x361
2 1 904.0585-00 Hose Air bleeder L= 500 mm630 Bar Air bleeding of hydraulic system
3 1 923.0422-00 Gauge, Feeler ,0.05-1 mm, L=300
4 1 BG00227693 Lfiting Tool CH/S660 Eccentric bushing
5 1 BG00227701 Lifting Tool CH/S660 Bottomshell bushing
6 1 BG00227711 Tool, Lifting Step bearing Step bearing components
7 5 442.0800-90 Lead, Cylinder D30 Check of close side setting
8 1 920.0110-00 Tool Slugging wrench NV 65 Screw & nut M24
9 1 920.0151-00 Tool Slugging wrench NV36 Screw & nut M42
10 1 899.0504-00 Eye Bolt VRS-F-M48 Swivel
11 3 899.0160-00 Eye Bolt LT M20 plain
12 4 899.0147-00 Eye Bolt LT M16 plain
13 4 899.0155-00 Eye Bolt LT M12 plain
14 2 899.0244-00 Eye Bolt LT M8 plain
15 1 BG00362732 Hydralic pump Mainshaft, with mountingoil
16 1 BG00363970 Cover KIT CH/S660 See section 14b. Cover kit

130 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04 BG00363970

14b. Cover kit

Pos. No. Qty. Part No. Description Remarks

1 BG00363970 Cover kit Consists of:
1 1 BG00214772 Cover CH/S 660
2 12 847.0359-00 Washer BRB 21x37 HB200
3 4 847.0147-00 Washer round 13x24 ZP
4 12 841.0041-00 Screw MC6S M20x90 12,9
5 4 841.0027-00 Screw MC6S M12x70 12.9

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 131

SPC Sandvik CH660:04

This page is intentionally left blank

132 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04 Crushing Chamber Alternatives

15. Crushing chamber

alternatives

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 133

SPC Sandvik CH660:04 Crushing Chamber Alternatives

15a. Crushing chamber alternatives

(Continued)

134 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04 Crushing Chamber Alternatives

(Continued)
Pos. No. Qty. Cat. No. Part No. Description Remarks
452.4211-901 Cone EC Rubber
1 1 7100-0 452.4212-901 Cone C Rubber Feed hopper
452.4213-901 Cone MC Rubber
442.8823-01 Filler ring MC (M)
1 6006-0
442.8863-01 Filler ring MF (F)
2 6 5685-2 840.1074-00 Screw M6S M30x280 8.8 ZP
6 5705-0 442.8881-01 Washer Fasteners for filler ring
6 5750-0 442.8908-01 Hose 31.5-0.6
442.8813-01 Ring Concave EC M1
442.8813-02 Ring Concave EC M2
442.8813-03 Ring Concave EC M7
442.9230-01 Ring Concave CX M1
442.9230-02 Ring Concave CX M2
442.9230-03 Ring Concave CX M7
442.8814-01 Ring Concave C M1
442.8814-02 Ring Concave C M2
442.8814-03 Ring Concave C M7
442.8815-01 Ring Concave MC M1
442.8815-02 Ring Concave MC M2
3 1 6005-0 442.8815-03 Ring Concave MC M7
442.8816-01 Ring Concave M M1
442.8816-02 Ring Concave M M2
442.8816-03 Ring Concave M M7
442.8817-01 Ring Concave MF M1
442.8817-02 Ring Concave MF M2
442.8817-03 Ring Concave MF M7
442.8818-01 Ring Concave F M1
442.8818-02 Ring Concave F M2
442.8818-03 Ring Concave F M7
452.0832-001 Ring Concave EF M1
452.0832-002 Ring Concave EF M2
442.8819-01 Mantle A CH660 M1
442.8819-02 Mantle A CH660 M2
442.8819-03 Mantle A CH660 M7
442.8820-01 Mantle B CH660 M1
442.8820-02 Mantle B CH660 M2
442.8821-01 Mantle D CH660 M1
442.8821-02 Mantle D CH660 M2
4 1 4175-0 442.8821-03 Mantle D CH660 M7
452.0820-001 Mantle EF CH660 M1
452.0820-002 Mantle EF CH660 M2
442.9760-01 Mantle HC CH660 M1
442.9760-02 Mantle HC CH660 M2
452.6027-001 Mantle FlexiFeed B CH660 M1
452.6027-002 Mantle FlexiFeed B CH660 M2
452.6027-003 Mantle FlexiFeed B CH660 M7

(Continued)

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 135

SPC Sandvik CH660:04 Crushing Chamber Alternatives

(Continued)
The table below illustrates the different crushing chamber alernatives
Example of the type number shown on the crusher’s identification plate:

CH660-M/B/M-36/40/44/32:1
Combination Concave (6005-0) Mantle (4175-0) Filler ring (6006-0) Feed hopper cone (7100-0)

EC/A EC Extra Coarse A EC Extra Coarse

442.8813-01 (M1) 442.8819-01 (M1)
442.8813-02 (M2) 442.8819-02 (M2) 452.4211-901 (Rubber)
442.8813-03 (M7) 442.8819-03 (M7)
Casting comp. 5×10 kg Casting comp. 9×10 kg

EC/B EC Extra Coarse B EC Extra Coarse

442.8813-01 (M1) 442.8820-01 (M1)
442.8813-02 (M2) 442.8820-02 (M1) 452.4211-901 (Rubber)
442.8813-03 (M7)
Casting comp. 5×10 kg Casting comp. 5×10 kg

EC/ EC Extra Coarse Flexifeed B EC Extra Coarse

Flexifeed B 442.8813-01 (M1) 452.6027-001 (M1)
442.8813-02 (M2) 452.6027-002 (M2) 452.4211-901 (Rubber)
442.8813-03 (M7) 452.6027-003 (M7)
Casting comp. 5×10 kg Casting comp. ?×10 kg

CX/D *See footnote D C Coarse

442.9230-01 (M1) 442.8821-01 (M1)
442.9230-02 (M2) 442.8821-02 (M2) 452.4212-901 (Rubber)
442.9230-03 (M7) 442.8821-03 (M7)
Casting comp. 12×10 kg Casting comp. 9×10 kg

C/A C Coarse A C Coarse

442.8814-01 (M1) 442.8819-01 (M1)
442.8814-02 (M2) 442.8819-02 (M1) 452.4212-901 (Rubber)
442.8814-03 (M7) 442.8819-03 (M7)
Casting comp. 20×10 kg Casting comp. 9×10 kg

C/B C Coarse B C Coarse

442.8814-01 (M1) 442.8820-01 (M1)
442.8814-02 (M2) 442.8820-02 (M2) 452.4212-901 (Rubber)
442.8814-03 (M7)
Casting comp. 20×10 kg Casting comp. 5×10 kg

C/Flexifeed B C Coarse Flexifeed B C Coarse

442.8814-01 (M1) 452.6027-001 (M1)
442.8814-02 (M2) 452.6027-002 (M2) 452.4212-901 (Rubber)
442.8814-03 (M7) 452.6027-003 (M7)
Casting comp. 20×10 kg Casting comp. ?×10 kg

* C crushing chambers with EC intake

(Continued)

136 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04 Crushing Chamber Alternatives

(Continued)
The table below illustrates the different crushing chamber alernatives
Example of the type number shown on the crusher’s identification plate:

CH660-M/B/M-36/40/44/32:1
Combination Concave (6005-0) Mantle (4175-0) Filler ring (6006-0) Feed hopper cone (7100-0)

MC/A/MC MC Medium A MC Medium MC Medium Coarse

442.8815-01 (M1) 442.8819-01 (M1)
442.8815-02 (M2) 442.8819-02 (M1) 442.8823-01 452.4213-901 (Rubber)
442.8815-03 (M7) 442.8819-03 (M7)
Casting comp. 13×10 kg Casting comp. 9×10 kg Casting comp. 13×10 kg

MC/B/MC MC Medium B MC Medium MC Medium Coarse

442.8815-01 (M1) 442.8820-01 (M1)
442.8815-02 (M2) 442.8820-02 (M2) 442.8823-01 452.4213-901 (Rubber)
442.8815-03 (M7)
Casting comp. 13×10 kg Casting comp. 5×10 kg Casting comp. 13×10 kg

MC/Flexifeed MC Medium Flexifeed B MC Medium Coarse MC Medium Coarse

B/MC 442.8815-01 (M1) 452.6027-001 (M1)
442.8815-02 (M2) 452.6027-002 (M2) 442.8823-01 452.4213-901 (Rubber)
442.8815-03 (M7) 452.6027-003 (M7)
Casting comp. 13×10 kg Casting comp. ?×10 kg Casting comp. 13×10 kg

MC/HC/MC MC Medium HC MC/ Medium Coarse MC Medium Coarse

442.8815-01 (M1) 442.9760-01 (M1)
442.8815-02 (M2) 442.9760-02 (M2) 442.8823-01 452.4213-901 (Rubber)
442.8815-03 (M7)
Casting comp. 13×10 kg Casting comp. 7×10 kg Casting comp. 13×10 kg

M/A/MC M Medium A MC/ Medium Coarse MC Medium Coarse

442.8816-01 (M1) 442.8819-01 (M1)
442.8816-02 (M2) 442.8819-02 (M2) 442.8823-01 452.4213-901(Rubber)
442.8816-03 (M7) 442.8819-03 (M7)
Casting comp. 14×10 kg Casting comp. 9×10 kg Casting comp. 13×10 kg

M/B/MC M Medium B MC/ Medium Coarse MC Medium Coarse

442.8816-01 (M1) 442.8820-01 (M1)
442.8816-02 (M2) 442.8820-02 (M2) 442.8823-01 452.4213-901 (Rubber)
442.8816-03 (M7)
Casting comp. 14×10 kg Casting comp. 5×10 kg Casting comp. 13×10 kg

M/HC/MC M Medium HC MC/ Medium Coarse MC Medium Coarse

442.8816-01 (M1) 442.9760-01 (M1)
442.8816-02 (M2) 442.9760-02 (M2) 442.8823-01 452.4213-901 (Rubber)
442.8816-03 (M7)
Casting comp. 14×10 kg Casting comp. 7×10 kg Casting comp. 13×10 kg

(Continued)

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 137

SPC Sandvik CH660:04 Crushing Chamber Alternatives

(Continued)
The table below illustrates the different crushing chamber alernatives
Example of the type number shown on the crusher’s identification plate:

CH660-M/B/M-36/40/44/32:1
Combination Concave (6005-0) Mantle (4175-0) Filler ring (6006-0) Feed hopper cone (7100-0)

MF/A/MF MF/ Medium Fine A MF/ Medium Fine

442.8817-01 (M1) 442.8819-01 (M1)
442.8817-02 (M2) 442.8819-02 (M2) 442.8863-01
442.8817-03 (M7) 442.8819-03 (M7)
Casting comp. 9×10 kg Casting comp. 9×10 kg Casting comp. 13×10 kg

MF/B/MF MF/ Medium Fine B MF Medium Fine

442.8815-01 (M1) 442.8820-01 (M1)
442.8815-02 (M2) 442.8820-02 (M2) 442.8863-01
442.8815-03 (M7)
Casting comp. 9×10 kg Casting comp. 5×10 kg Casting comp. 13×10 kg

MF/HC/MF MF/Medium Fine HC MF Medium Fine

442.8817-01 (M1) 442.9760-01 (M1)
442.8817-02 (M2) 442.9760-02 (M2) 442.8863-01
442.8817-03 (M7)
Casting comp. 9×10 kg Casting comp. 7×10 kg Casting comp. 13×10 kg

F/A/MF F Fine A MF Medium Fine

442.8818-01 (M1) 442.8819-01 (M1)
442.8818-02 (M2) 442.8819-02 (M2) 442.8863-01
442.8818-03 (M7) 442.8819-03 (M7)
Casting comp. 13×10 kg Casting comp. 9×10 kg Casting comp. 13×10 kg

F/B/MF F Fine B MF/ Medium Fine

442.8818-01 (M1) 442.8820-01 (M1)
442.8818-02 (M2) 442.8820-02 (M2) 442.8863-01
442.8818-03 (M7)
Casting comp. 13×10 kg Casting comp. 5×10 kg Casting comp. 13×10 kg

F/HC/MF F Fine HC MF/ Medium Fine

442.8818-01 (M1) 442.9760-01 (M1)
442.8818-02 (M2) 442.9760-02 (M2) 442.8863-01
442.8818-03 (M7)
Casting comp. 13×10 kg Casting comp. 7×10 kg Casting comp. 13×10 kg

EF/EF EF Extra Fine EF Extra Fine

452.0832-001 (M1) 452.0820-001 (M1)
Wear plate
452.0832-002 (M2) 452.0820-002 (M2)
442.9415-00

Casting comp. 13×10 kg Casting comp. 7×10 kg

138 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04

16. Recommended spare parts

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 139

SPC Sandvik CH660:04

16a. Recommended spare parts

Qty. Cat. No. Part No. Description Remarks
1 891.1772-901 Bottom rubber liner wall protection kit
1 452.5470-901 Bottom shell arm liner manganese kit
1 891.1897-901 Rubber liners for cone EC kit
1 891.1902-901 Rubber liners for cone C kit Alternative or order connected
1 891.1908-901 Rubber liners for cone MC kit
2 5150-0 442.8812-00 Arm shield
442.8819-01 Mantle A M1
442.8819-02 Mantle A M2
442.8819-03 Mantle A M7
442.8820-01 Mantle B M1
442.8820-02 Mantle B M2
442.8821-01 Mantle D M1
442.8821-02 Mantle D M2
1 4175-0 442.8821-03 Mantle D M7 Alternative or order connected
452.0820-001 Mantle EF M1
452.0820-002 Mantle EF M2
442.9760-01 Mantle HC M1
442.9760-01 Mantle HC M2
452.6027-001 Mantle FlexiFeed B M1
452.6027-002 Mantle FlexiFeed B M2
452.6027-003 Mantle FlexiFeed B M7
Casting compound Mantle A 9x10 kg
Casting compound Mantle B 5x10 kg
Casting compound Mantle D 7x10 kg
4175-9 831.0016-00 Per manganese change
Casting compound Mantle EF 7x10 kg
Casting compound Mantle HC 9x10 kg
Casting compound Mantle FlexiFeed B 6x10 kg

(Continued)

140 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04

(Continued)
Qty. Cat. No. Part No. Description Remarks
442.8813-01 Concave ring CH660: EC M1
442.8813-02 Concave ring CH660: EC M2
442.8813-03 Concave ring CH660: EC M7
442.9230-01 Concave ring CH660: CX M1
442.9230-02 Concave ring CH660: CX M2
442.9230-03 Concave ring CH660: CX M7
442.8814-01 Concave ring CH660: C M1
442.8814-02 Concave ring CH660: C M2
442.8814-03 Concave ring CH660: C M7
442.8815-01 Concave ring CH660: MC M1
442.8815-02 Concave ring CH660: MC M2
1 6005-0 442.8815-03 Concave ring CH660: MC M7 Alternative or order connected
442.8816-01 Concave ring CH660: M M1
442.8816-02 Concave ring CH660: M M2
442.8816-03 Concave ring CH660: M M7
442.8817-01 Concave ring CH660: MF M1
442.8817-02 Concave ring CH660: MF M2
442.8817-03 Concave ring CH660: MF M7
442.8818-01 Concave ring CH660: F M1
442.8818-02 Concave ring CH660: F M2
442.8818-03 Concave ring CH660: F M7
452.0832-001 Concave ring CH660: EF M1
452.0832-002 Concave ring CH660: EF M2
Casting compound Concave ring EC 13x10 kg
Casting compound Concave ring CX 13x10 kg
Casting compound Concave ring C 20x10 kg
Casting compound Concave ring MC13x10 kg
4175-9 831.0016-00 Per manganese change
Casting compound Concave ring M 9x10 kg
Casting compound Concave ring MF 14x10 kg
Casting compound Concave ring F 12x10 kg
Casting compound Concave ring EF 5x10 kg

(Continued)

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 141

SPC Sandvik CH660:04

(Continued)
Qty. Cat. No. Part No. Description Remarks
1 6050 442.8793-01 Support ring 1 every fourth manganese change
1 5651-0 873.1160-00 O-ring for spider cap Per manganese change
1 4205-0 442.8800-00 Head nut / Burning ring 1 head nut / burning ring per every second
manganese change
1 4205-2 452.0269-001 Burning ring 1 burning ring per manganese change when
not changing head nut.
When changing head nut you get a burning
ring together with the head nut.
1 5675-0 BG00248051 Spider bushing
1 5705-0 442.8755-01 Oil seal ring Per manganese change
1 825.0182-00 Grease Tribol tin 18,0 kg 1/2 Grease Tribol tin 18,0 kg per manganese
change (7-9 kg)
1 1430-0 442.8808-01 Gasket
1 BG00259473 Step bearing set
1 4025-0 BG00325390 Mainshaft sleeve
1 4305-0 442.8802-01 Dust seal ring
1 4355-0 442.8804-01 Retainer
452.5799-901 Locating bar kit
1 4355-1 442.8805-01 Scraper
1 452.5793-901 Fastener kit concave + support ring
4 6105-0 442.8290-01 Dowel pin

(Continued)

142 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB

SPC Sandvik CH660:04

(Continued)
Plus Parts (these parts will normally not be consumed on annual basis)
Qty. Cat. No. Part No. Description Remarks
1 5650-0 452.3841-001 Spider cap
1 1200-0 442.8742-01 Bottom shell bushing
1 1810-0 442.8824-01 Eccentric bushing 18 + 20 + 24 + 28 Alternative or order connected
1 1810-0 442.8825-01 Eccentric bushing 28 + 32 + 36 + 40
1 1810-0 442.8826-01 Eccentric bushing 40 + 44 + 48 + 50
1 1880-0 442.8761-01 Eccentric wearing plate
1 2050-0 442.8724-01 Hydroset cylinder bushing
1 452.5576-901 Pinion shaft repair kit
1 3505-0 442.8772-01 Pinion shaft
1 4205-1 442.8791-01 Inner head nut
1 4350-0 442.8801-01 Dust seal retaining ring
1 BG00563308 Mainshaft As. excl. Mantle
1 BG00395488 Top Shell As. excl. Concave
1 BG00598827 Pinionshaft housing As. excl. pulley

© 2015 Sandvik SRP AB Doc. no. R 223.1444 Ver. 01 143

SPC Sandvik CH660:04

This page is intentionally left blank

144 Doc. no. R 223.1444 Ver. 01 © 2015 Sandvik SRP AB