PRODUCT DATASHEET

OTi DALI 10/220…240/700 NFC

OPTOTRONIC Intelligent – DALI LT2 NFC | Compact constant current LED drivers

AREAS OF APPLICATION

– Installation in emergency lighting systems according to IEC

61347-2-13, appendix J
– Suitable for use in luminaires with flexible current setting
– Suitable for indoor SELV installations
– Suitable for luminaires of protection classes I and II
– Suitable for downlights, spotlights and LED panels
– Installation via Cable Clamp Kit possible (depending on version
of product)

__

PRODUCT FAMILY BENEFITS

– Versatile DALI window driver due to flexible output characteristic

– Very high efficiency
– Protection of the system thanks to thermal management and Smart Control
– High-quality dimming of 1…100 % by amplitude dimming
– Easy and fast output current setting via NFC

PRODUCT FAMILY BENEFITS

– Versatile DALI window driver due to flexible output characteristic

– Very high efficiency
– Protection of the system thanks to thermal management and Smart Control
– High-quality dimming of 1…100 % by amplitude dimming
– Easy and fast output current setting via NFC

January 20, 2020, 03:18:34 © 2020, products of OSRAM GmbH, distributed by LEDVANCE GmbH.
All rights reserved.
OTi DALI 10/220…240/700 NFC Page 1 of 5
 PRODUCT DATASHEET

VERSATILE SCOPE OF APPLICATION DUE TO OSRAM DALI TECHNOLOGY:

– Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13,appendix J) thanks to DC detection (0 Hz,
pulsating DC), on/off switchable
– Feedback of power consumption and operating hours (Fit for SMART GRID)
– Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting

VERSATILE SCOPE OF APPLICATION DUE TO OSRAM DALI TECHNOLOGY:

– Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13,appendix J) thanks to DC detection (0 Hz,
pulsating DC), on/off switchable
– Feedback of power consumption and operating hours (Fit for SMART GRID)
– Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting

PRODUCT FAMILY FEATURES

– Supply voltage: 220…240 V

– Line frequency: 0 Hz | 50 Hz | 60 Hz
– Line voltage: 198…264 V
– According to EN 61347-1, 61347-2-13, 62384
– RI suppression according to EN 55015:2007+A1:2007/CDN
– Line harmonics according to EN 61000-3-2
– Immunity according to EN 61547
__ – Lifetime: up to 100,000 h
– Type of protection: IP20

TECHNICAL DATA

Electrical data

Nominal voltage 220…240 V

Mains frequency 0…60 Hz

Input voltage AC 198…264 V 1)

Input voltage DC 176…276 V

Total harmonic distortion 15 % 2)

Power factor λ > 0.98/> 0.94

ECG efficiency 82 % 3)

Device power loss 3.5 W

Power loss in stand-by mode ≤0.15 W

Inrush current 5 A 4)

Max. ECG no. on circuit breaker 10 A (B) 80

Max. ECG no. on circuit breaker 16 A (B) 130

Max. ECG no. on circuit breaker 25 A (B) -

Surge capability (L/N-Ground) 2 kV

January 20, 2020, 03:18:34 © 2020, products of OSRAM GmbH, distributed by LEDVANCE GmbH.
All rights reserved.
OTi DALI 10/220…240/700 NFC Page 2 of 5
 PRODUCT DATASHEET

Surge capability (L-N) 1 kV

Nominal output voltage 2.5…45 V 5)

U-OUT (working voltage) 60 V

Nominal output current 150…700 mA 6)

Output current tolerance ±3 %

Output ripple current (100 Hz) <2%

Nominal output power 10 W 7)

Galvanic isolation SELV

Galvanic isolation primary/secondary 3.75 kV

1) Permitted voltage range

2) At full load, 220…240 V, 50 Hz / At half load, 220…240 V, 50 Hz

3) Typical / At full load and 230 V

4) t = 100 µs (measured at 50 % I )
width peak
5) Maximum 60 V

6) ±3%

7) Partial load 1.5...10 W

Dimensions & weight

__

Length 124.0 mm

Width 31.0 mm

Height 21.0 mm

Mounting hole spacing, length 115.0 mm

Cable cross-section, input side 0.2…1.5 mm² 1)

Cable cross-section, output side 0.2…1.5 mm² 1)

Product weight 50.00 g

Wire preparation length, input side 8.0…9.1 mm

Wire preparation length, output side 8.0…9.1 mm

1) Solid or flexible leads

Colors & materials

Casing material Plastic

January 20, 2020, 03:18:34 © 2020, products of OSRAM GmbH, distributed by LEDVANCE GmbH.
All rights reserved.
OTi DALI 10/220…240/700 NFC Page 3 of 5
 PRODUCT DATASHEET

Temperatures & operating conditions

Ambient temperature range -20…+50 °C

Maximum temperature at tc test point 75 °C 1)

Max.housing temperature in case of fault 110 °C

Permitted rel. humidity during operation 5…85 % 2)

1) Maximum at the Tc-point

2) Maximum 56 days/year at 85 %

Lifespan

ECG lifetime 50000 / 100000 h 1)

1) T = 75°C, 0.2% / 1,000 h failure rate / T = 65°C, 0.1% / 1,000 h failure rate
c c

Additional product data

Encapsulated No

Capabilities

Dimmable Yes

Dimming interface DALI

Dimming range 1…100 % 1)

Dimming method Amplitude Modulation

Constant lumen function Programmable

__
Overheating protection Automatic reversible

Overload protection Automatic reversible

Short-circuit protection Automatic reversible

No-load proof Yes

Max. cable length to lamp/LED module 2.0 m

Suitable for fixtures with prot. class I / II

Suitable for emergency lighting Yes

Type of connection, output side Push terminal

1) For maximum nominal output current

Certificates & standards

Approval marks – approval ENEC 10 / VDE / EMC / EL / CE / DALI-2

Standards Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN

61547/Acc. to EN 61000-3-2/Acc. to EN 62384/Acc. to EN 62386/Acc. to
IEC 62386-101:Ed2/Acc. to IEC 62386-102:Ed2/Acc. to IEC 62386-
207:Ed1

Protection class II

Type of protection IP20

Logistical data

Temperature range at storage -40…+85 °C

January 20, 2020, 03:18:34 © 2020, products of OSRAM GmbH, distributed by LEDVANCE GmbH.
All rights reserved.
OTi DALI 10/220…240/700 NFC Page 4 of 5
 PRODUCT DATASHEET

DOWNLOAD DATA

File

User instruction
OPTOTRONIC LED Power Supply

Product Datasheet
Technical datasheet OTI DALI 10 NFC

Certificates
730563_VDE Certificate

Certificates
VDE ENEC Certificate 40038447

Certificates
VDE EMC Certificate 40044675 (EN)

Declarations of conformity
INOTEC Conformity declaration AM07730 OTiD ALI 10 220-240 700 NFC

Declarations of conformity
EATON(CEAG) Conformity declaration AM07730_OTi_DALI_10_220-240_700_NFC

Declarations of conformity
EU Declaration of Conformity 3758701

Declarations of conformity
EU Declaration of Conformity 3365628

CAD data
OTi DALI 10 700 NFC built in IGS

CAD data
OTi DALI 10 700 NFC built in STEP
__
CAD data
OTi DALI 10 700 NFC independent IGS

CAD data
OTi DALI 10 700 NFC independent STEP

CAD data PDF

OTi DALI 10 700 NFC built in PDF

CAD data PDF

OTi DALI 10 700 NFC independent PDF

LOGISTICAL DATA

Product code Packaging unit (Pieces/Unit) Dimensions (length x width x height) Gross weight Volume

4052899562646 Shipping carton box 165 mm x 258 mm x 71 mm 1120.00 g 3.02 dm³

20

The mentioned product code describes the smallest quantity unit which can be ordered. One shipping unit can contain one or more
single products. When placing an order, for the quantity please enter single or multiples of a shipping unit.

DISCLAIMER

Subject to change without notice. Errors and omission excepted. Always make sure to use the most recent release.

January 20, 2020, 03:18:34 © 2020, products of OSRAM GmbH, distributed by LEDVANCE GmbH.
All rights reserved.
OTi DALI 10/220…240/700 NFC Page 5 of 5