Scribd
Upload
89 views1 page

224722-HAMMER 6IN RH510R;32-5165-RMA-04C 山特钻头

This document provides specifications for a hammer tool including: 1. The hammer is 6 inches long, weighs 82 kg, and has an outside diameter of 150 mm. 2. It lists replacement parts such as the top sub, check valve components, piston, and driver sub. 3. Technical specifications are provided like air consumption rates at different pressures and a list of available replacement kits.

Uploaded by

Jimmy Zhao
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
89 views1 page

224722-HAMMER 6IN RH510R;32-5165-RMA-04C 山特钻头

This document provides specifications for a hammer tool including: 1. The hammer is 6 inches long, weighs 82 kg, and has an outside diameter of 150 mm. 2. It lists replacement parts such as the top sub, check valve components, piston, and driver sub. 3. Technical specifications are provided like air consumption rates at different pressures and a list of available replacement kits.

Uploaded by

Jimmy Zhao
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

冲击器物料编码- 224722

RH510r Text:HAMMER 6IN RH510R;32-5165-RMA-04C 6"


对接螺纹：3 1/2"
Complete Hammer
3 1/2" API reg. pin top sub 32-5165-RMA-04C
#28 Cubex. pin top sub 32-5165-RMA-56C
3 1/2" BECO. pin top sub 32-5165-RMA-55C
3 1/2" API reg. pin top sub and hard faced driver sub 32-5165-TMA-04C

WEIGHT OUTSIDE HAMMER HAMMER LENGTH


DIAMETER LENGTH WITH BIT
Bit closed Bit extended
kg lb mm inch mm inch mm inch mm inch
82 180 150 5.9 922 36.3 1008 39.7 1046 41.2

AIR CONSUMPTION, CFM AIR CONSUMPTION, M³/MIN


150 psi 250 psi 350 psi 10 bar 18 bar 24 bar
343 659 972 9.8 18.7 27.5

REPLACEMENT PARTS ITEM DESCRIPTION Weight, kg Weight, lb Part No.


  1. Top sub with 3 O-rings
   3 1/2" API reg. pin 22 48.4 33-68602/04CA
1    #28 Cubex. pin 22 48.4 33-68602/56CA
   3 1/2" BECO. pin 22 48.4 33-68602/55CA
  2. O-ring top sub OD (1) In seal kit
  3. O-ring top sub ID (2) In seal kit

2   4. Check valve dart with spring 0.3 0.66 25-99002A


3   5. Check valve dart spring 0.02 0.044 BG00348123
  6. Check valve guide 0.3 0.66 39-68001
  7. Choke set, blank 1/8", 3/16", & 1/4" 0.12 0.264 29-68017A
4
  8. Feed tube retainer pin 0.2 0.44 12-99013
  9. Feed tube with retainer pin and blank choke 1 2.2 37-68601A
10. Piston 18 39.6 BG00210384
5 11
11. Piston case with retainer ring 33 72.6 BG00143988
12. Piston retainer ring 0.1 0.22 23-99028
6
13. O-rings – guide sleeve, bit retainer (3) In seal kit
14. Guide sleeve with 2 O-rings (#13) 4 8.8 26-68J10A

7 15. Bit retainer ring with O-ring (#13) 1 2.2 27-68006A


16. Driver sub 6 13.2 34-68670
8 Driver sub hard faced 7.4 16.3 BG00370990
12
13
9 Seal kit
14 1 pieces of #2, 2 of #3 & 3 of #13 0.25 0.5 38-68656

13 Rebuild kit
15 1 piece of #1, 1 of #11, 1 of #16 & seal kit
13   3 1/2" API reg. pin 62 136.4 BG00195819

10 16   #28 Cubex. pin 62 136.4 BG00474776


  3 1/2" BECO. pin 62 136.4 BG00474787
  3 1/2" API reg. pin and hard faced driver sub 62 136.4 BG00718140

Bit shank

M60

20 Sandvik DTH Tools

You might also like