Toll Free: 87 PERMATEX Technical Data Sheet
(877-376-2839)
6875 Parkland Boulevard, Solon Industrial Strength Cleaner &
Ohio 44139
Degreaser
Revised 02/19
PRODUCT DESCRIPTION 2. Apply Industrial Strength Cleaner and Degreaser in full
PERMATEX® Industrial Strength Cleaner & Degreaser is strength onto the cool, pre-tested surface to be
formulated for heavy duty cleaning and degreasing jobs that degreased.
ordinary cleaners cannot handle. Permatex® Industrial Strength 3. Allow cleaner to penetrate the soil. NEVER allow
Cleaner & Degreaser is a ready-to-use, water-based cleaner to dry on any surface. Stubborn soils may
composition of alkaline salts, powerful grease emulsifiers, and require brushing or a second application.
grease cutting solvents. This cleaner cuts heavy grease and 4. Immediately rinse with water until no sudsing is
soils quickly with no harsh fumes or unpleasant odors. It is noticeable.
readily biodegradable according to OECD 301-C modified MITI
Test (I), contains no petroleum solvents or acids, and is non-
flammable. PROPERTIES OF MATERIAL
Typical Value
PRODUCT BENEFITS Chemical Type Water-based alkaline degreaser
• VOC compliant in all 50 states containing proprietary ingredients,
surfactants and conditioners
• Special blend of surfactants, detergents and emulsifiers Appearance Clear orange liquid
• Water soluble solution Odor citrus
• Contains no petroleum based solvents Flash Point >200F
• Biodegradable Specific Gravity 1.01
• No acids pH 12.4
• Non-flammable
• Non-combustible GENERAL INFORMATION
• Non-abrasive
For safe handling information on this product, consult the
• Non-aerosol package eliminates product waste from
Material Safety Data Sheet, (MSDS).
propellant depletion
ORDERING INFORMATION
TYPICAL APPLICATIONS
Part Number Container Size
Applications
Machinery/equipment Walls 12546 128 fl oz Jug
Exhaust filters Fiberglass
Cold engines Concrete STORAGE
Wax remover Carpets Products shall be ideally stored in a cool, dry location in
Exterior siding Molds unopened containers at a temperature between 8 and 49C
Tooling/tools Tanks (46 and 120F). Optimal storage is at the lower end of this
Shop floors Janitorial cleaning range.
NOTE
Substances (Soils) Removed The data contained herein are furnished for information only
Grease & grime Lubricants Oil deposits and are believed to be reliable. We cannot assume
Tar Food stains Wax responsibility for the results obtained by others over whose
Ink Dirt/mud Smoke and soot methods we have no control. Permatex, Inc. specifically
disclaims all warranties expressed or implied, including
DIRECTIONS FOR USE warranties of merchantability or fitness for a particular
NOTE: Some surfaces such as aluminum alloys, plastic or purpose, arising from sale or use of Permatex, Inc.
painted surfaces are inherently sensitive to alkaline products and disclaims any liability for consequential or
cleaners. Spot test on ALL surfaces before use. Do not use incidental damages of any kind, including lost profits.
on glass. Use with adequate ventilation. Do not inhale mist.
The use of safety glasses and rubber gloves is recommended.
These directions must be followed or damage may result.
1. Before degreasing, be sure that all surfaces are cool to
the touch. Do not apply in direct sunlight or if air
temperature is above 100F.
NOT FOR PRODUCT SPECIFICATIONS.
THE TECHNICAL DATA CONTAINED HEREIN ARE INTENDED AS REFERENCE ONLY.
PLEASE CONTACT PERMATEX, INC., TECHNICAL SERVICE DEPARTMENT FOR ASSISTANCE AND RECOMMENDATIONS FOR YOUR SPECIFIC APPLICATION.
PERMATEX, INC., 6875 PARKLAND BOULEVARD, SOLON, OH 44139 PHONE – (1-87PERMATEX)
Permatex is a registered trademark of Permatex, Inc. ©2019 All rights reserved.
