ALCATEL-LUCENT
8340 SMART IP-DECT ACCESS POINTS
8340 SMART IP-DECT AP INTEGRATED ANTENNAS
AND 8340 SMART IP-DECT AP EXTERNAL ANTENNAS
RELEASE 1.5.0
The Alcatel-Lucent 8340 SmartIP-DECT Access Points (APs) product family provides DECT con-
nectivity on the Alcatel-Lucent OmniPCX™ Enterprise and OmniPCX Office Rich Communication
Edition (RCE) Communication Server (CS), to offer cost-effective, on-site mobility using IP
network connectivity. In conjunction with Alcatel-Lucent 500/8232 DECT handsets, the 8340
Smart IP-DECT APs offer reliable voice communications and full integration with the OmniPCX
Enterprise CS voice services (such as dial-by-name or multi-line management) to provide seam-
less feature transition between Alcatel-Lucent fixed desk phones and on-site mobility. R150
supports embedded certificates for 802.1x readiness, OXE spatial redundancy and Passive Call
Server support.
The Alcatel-Lucent 8340 IP-DECT is HD-voice ready according to CAT-iq and will protect your
investment when end to end high audio quality will be available and is compatible with existing
4080 IP-DECT installations.
KEY FEATURES KEY BENEFITS
• Support Alcatel-Lucent OmniPCX • Provide cost-effective on-site mobility
telephony protocol: AGAP in IP-only and IP/TDM networks
• Support GAP protocol • Offer end users access to OmniPCX
• Support identity, authentication and Enterprise call server voice features
encryption as defined in ETSI • Adapted for all enterprise environments:
• Radio coverage from 50 m to 300 m office and industrial
(approximately 55 yd to 328 yd) • Suitable for mid-sized and large
depending on location and environment enterprises as well as branch offices
• Switched antenna diversity • Coverage can fit most difficult areas using
• Products for all frequency bands: Europe, external antennas
US (DECT 6.0), South America and Asia ¬ Support 8232 DECT handsets in AGAP
8340 Smart IP-DECT AP Integrated Antennas • Adapted for indoor and outdoor mode 500/500Ex in GAP mode
3BN67188AA environments on OmniPCX Enterprise
• Integrated antennas ¬ Support 8232/500/500Ex in GAP mode
on OmniPCX Office RCE with corporate
• SMA connectors for external antennas
directory and messaging
on indoor and outdoor models
¬ HD-voice ready according to CAT-iq
¬ Compatible with 4080 IP-DECT existing
installations
8340 Smart IP-DECT AP External Antennas
in outdoor box
3BN67188AA+3BN67184AA+3BN67182AA
TECHNICAL SPECIFICATIONS IP specifications DAP manager platforms
Radio specifications • IPV4 • Microsoft® Windows® XP Professional,
• DHCP/TFTP, DHCP option 12 SP2/SP3 32 bits
• DECT/GAP
• Multicast RFC1112: multicast-aware • Windows 7 Professional/ Enterprise/
• Frequency band
routers Ultimate 32/64 bits
¬ Europe: 1.88 GHz – 1.90 GHz
• QoS: IEEE 802.1 P/Q • Windows 8 32/64 bits editions
¬ US: 1.92 GHz – 1.93 GHz
• Audio CODEC: G711 (A,μ), G729AB • Windows Server® 2003 SP2 32 bits
¬ South America: 1.91 GHz – 1.93 GHz
• Framing: 20 ms, 30 ms, 40 ms, 50 ms or • Windows Server 2003 R2 SP2 32 bits
except Brazil 1910-1920 Mhz
60 ms • Windows Server 2008 SP2 32/64 bits
¬ Asia: 1.90 GHz – 1.906 GHz
• Manufacturing & customer certificates • Windows Server 2008 R2 SP2 64 bits
support readiness • Windows 2012 64 bits server (Windows 8
Functionality
server)
• Channels can be disabled by DECT
AP (DAP) manager to adapt to local Electrical interface
regulations • IP interface 10/100Base-T, IEEE802.3 DAP manager hardware requirements
• Channel bandwidth: 1.728 MHz • IPV4 • At least 2.6 GHz CPU speed
• Transmission carriers: 10 • RJ45 connector • Minimum 1-Gb RAM
• Maximum number of simultaneous active • Cabling CAT5 or CAT 6 UTP • CD-ROM drive
calls: 11 • Minimum 1-Gb hard disk space
• Over the air synchronization; requires one Power feeding
channel • Remote power feeding on IP link 802.3af DAP manager software requirements
• RF power 250 mW, limited to 100 mW for • PoE class 2 (6.49 W maximum) • Windows Internet Information Services (IIS)
US (DECT 6.0) • Local power feeding for extended wiring
• Sensitivity: Typical -90 dBm measured at range to call server must comply with Regulatory
antenna connection at BER=0.001 clause 2.5 (limited power source) per CSA/ EU directives
• Radio coverage from 50 m to 300 UL/IEC/EN60950-1 • R&TTE 1999/5/EC
m (approximately 55 yd to 328 yd) • Uses same PoE injector as the Alcatel- • EMC 2004/108/EC
depending on location and environment Lucent OmniTouch™ 8082 My Instant
• LVD 2006/95/EC
• Switched antenna diversity Communicator (IC) Phone
• ROHS 2011/65/EU
• Integrated omni-directional antenna 3dBi Operating temperature
• WEEE 2012/19/EC
gain (maximum) • Indoor: 23°F to 113°F (-5°C to 45°C)
• Eco design 2009/125/EC
• SMA connectors for connecting external • Outdoor: 32°F to 113°F (-20°C to +45°C)
antennas
• SAR: < 0.283 W/kg for 11 simultaneous Safety
Dimensions
active calls • IEC 60950-1
(Wall and ceiling mountable)
• EN 60950-1
Indoor
DECT protocol specifications • Height: 6.85 in. (174 mm)
• UL 60950-1
• ETSI GAP compliant • CAN/CSA-22.2 No 60950-1
• Width: 5.7 in. (145 mm)
• Alcatel-Lucent AGAP protocol • Depth: 1.69 in. (43 mm)
• Support identity, authentication and • Weight: 11.29 oz. (320 g)
EMC and radio
encryption • EN 301 406
• Audio CODEC G726 • EN 301 489-01
Outdoor
• OmniPCX Enterprise configuration: up to • EN 301 489-06
• Height: 9.45 in. (240 mm)
256 access points per system; 750 access • IEC 61000-4-2 Level 3 criteria B
• Width: 11.42 in. (290 mm)
points with Premium Customer Support
• IEC 61000-4-3 Level 3 criteria A (3V/m
process, 1500 DECT handsets • Depth: 3.46 in. (88 mm)
except in GSM frequency range: 10V/m)
• OmniPCX Office RCE configuration: up to • Weight: 43.39 oz. (1.23 kg)
• FCC CFR47 Part 15D
16 access points and 50 DECT handsets
• RSS 213
Serviceability
• Anatel (6kV contact discharge and 8 kV air
• LED status indication
discharge)
• Software downloading from DAP manager
• Web-based management tools
¬ Internet Explorer 6 or higher
¬ Firefox®
Alcatel-Lucent 8340 IP-Dect Access Points
ALCATEL-LUCENT ENTERPRISE DATA SHEET
2
SAR Accessories
• EN 50385 • 3BN67182AA external antennas
• FCC OET Bulletin 65 • 3BN67184AA outdoor box
• IEEE 1528 • 3BN67185AA 8 dBi Gain antenna
• RSS-102 • 3BN67186xA site survey kit
• 3BN67187AA site survey kit tripod
DECT • 3MG27035xx PoE injector
• EN 300 175 • 3BD52212AA 7,5 dB Gain antenna
• EN 301 406 (TBR6) (requires 3DC01001AA)
• EN 301 176-2 (TBR10) • 3DC01001AA DC blocking module
• 3BD52205AA 8dB right circular antenna
Environmental • 3BD52206AA 8dB left circular antenna
• ETS
¬ Operation (indoor):
ETSI EN 300 019-1-3-class 3.2
¬ Operation (outdoor):
ETSI EN 300 019-1-4- class 4.1 with
-20°C for low temperature & +45°C as
high temperature
¬ Storage :
ETSI EN 300 019-1-1- class 1.2
¬ Transport:
ETSI EN 300-019-1-2-class 2.3
• IP Class
¬ IP Class (IEC 60529)
¬ Indoor base station: IP40
¬ Outdoor base station: IP66
www.alcatel-lucent.com Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of
Alcatel-Lucent. All other trademarks are the property of their respective owners. The information presented
is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein.
Copyright © 2013 Alcatel-Lucent. All rights reserved. E2013113523EN (December)
