The Direct Way to Industrial Ethernet
Industrial Isolated USB to RS-232/RS-422/485 Converter
Retriever RUS-9530
Overview
The RUS- 9530 convert is an intelligent, stackable expansion module that connects to a PC USB port
or USB Hub via the Universal Serial Bus (USB) port, providing one High-Speed RS-232/RS-422 or
RS-485 jumperless serial port.
The RUS-9530 features easy connectivity for traditional serial devices. The RS-232 standard
supports full-duplex communication and handshaking signals (such as RTS, CTS) and The
RS-485 control is completely transparent to the user and software written for half-duplex COM works
without any modification.
The RUS-9530's Opto-isolators provide 3000 Vdc of isolation to protect the host computer from
ground loops and destructive voltage spikes on the RS-232/RS-422 and RS-485 data lines.
RUS-9530 also offer internal surge-protection on their data lines. Internal high-speed transient
suppressors on each data line protect the modules from dangerous voltages levels or spikes.
The RUS-9530 module derives the power from USB port and doesn’t need any power adapter.
Key Features
z Industrial Conformance
USB Specification 1.1 Compliant
Auto direction flow control on RS-485
Full-Duplex RS-232/RS-422 support
RS-232 support RTS & CTS handshake signals
Minimum 3000 VDC isolation protection
Transient suppression on RS-485 data lines
Auto switching for USB to RS-232/RS-422 or RS-485(jumperless)
Auto Switching Baud Rate up to 115.2 Kbps
Reserved space for termination resistors R1(TX/DATA), R2(RX)
Power and data flow indicator for troubleshooting
Driver support for Windows 95/98/ME/2000/XP, Linux
Power requirement: Self Power
Mounts easily on DIN-rail or panel
Mechanical Dimension (in cm)
Connection
Pin Definitions
Pin No. Name Description
1 TX+/D+ RS-422 or RS-485 transmission line, positive
2 TX-/D- RS-422 or RS-485 transmission line, negative
3 RX+ RS-422 receive line, positive
4 RX- RS-422 receive line, negative
5 NC
6 TX RS-232 Transmission line
7 RX RS-232 Receive line
8 RTS RS-232 Request to send line
9 CTS RS-232 Clear to send line
10 F.GND Ground
USB Type B connector
1 +5V USB +5VDC bus power
2 Data- USB Data line, Negative
3 Data+ USB Data line, Positive
4 GND USB bus power ground
Block Diagram
TX+/D+
TX- /D-
Data+ Auto RX+
Protector
Data- USB baud rate RX-
+5V Controller detector
GND TX
RX
VSS RTS
Isolated CTS
Power Supply
F.GND
Specifications
USB Controller Compatibility USB Specification 1.1 Standard
USB Interface USB type B connector
Isolation Protection RS-232/422/485
Converted signals RS-232/RS-422 or RS-485 Auto switching (jumperless)
Handshaking RS-232 support RTS & CTS handshake signals
Auto switching baud rate 300 ~115.2 K BPS
Isolation voltage 3000 VDC
Transmission & Receiving LED indicator
RS-232/RS-422/RS-485 Plug in screw terminal
Plug-in screw terminal wiring Accepts AWG 1-#12 to #22 (0.5 to 2.5 mm) wires
Power
Power Requirements USB Bus power, no external power adaptor required
Power consumption 0.65W
Physical
Case ABS with captive mounting hardware
Accessories NYLON DIN-rail Mounting Adapter SECC Panel Mounting Bracket
Dimension 7 x 10 x 2 cm
Weight 0.4 kg
Environmental
Operation Temp -25 to 75 deg C
Storage Temp -40 to 80 deg C
Humidity 5~95%, non-condensing
Regulatory Approval
z RoHS & WEEE Compliant
z CE
z FCC
Ordering Information
RUS-9530 : Industrial Isolated USB to RS-232/RS-422/485 Converter
