Scribd
Upload
312 views1 page

Starex Abs SD 0150W (Natural)

1. This document provides information on the physical and mechanical properties of the ABS resin grade SD-0150 W, including specific gravity, melt flow index, tensile strength, flexural strength, impact strength, hardness, and vicat softening temperature. 2. The values listed are representative and may deviate, and are provided for customer convenience but do not guarantee material specifications or safety. 3. Users are solely responsible for determining compatibility of materials for their intended use and any resulting damages. Values may change without notification due to quality improvements.

Uploaded by

Ale Arias
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
312 views1 page

Starex Abs SD 0150W (Natural)

1. This document provides information on the physical and mechanical properties of the ABS resin grade SD-0150 W, including specific gravity, melt flow index, tensile strength, flexural strength, impact strength, hardness, and vicat softening temperature. 2. The values listed are representative and may deviate, and are provided for customer convenience but do not guarantee material specifications or safety. 3. Users are solely responsible for determining compatibility of materials for their intended use and any resulting damages. Values may change without notification due to quality improvements.

Uploaded by

Ale Arias
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Grade SD-0150 W

Resin Type ABS

Physical
Natural or representative
Specific Gravity ASTM D792 color - 1.04

Melt Flow Index ASTM D1238 200 ℃, 5kg g/10min 2.2

Mechanical
Tensile Strength at Yield ASTM D638 5mm/min kgf/cm2 440

Flexural Strength ASTM D790 2.8mm/min kgf/cm2 650

Flexural Modulus ASTM D790 2.8mm/min kgf/cm2 22000


Izod Impact ASTM D256 1/4 inch at 23°C kgf·cm/cm 21
Strength(notched)
Rockw ell Hardness ASTM D785 R-Scale - 109

Thermal
VICAT Softening ISO R 306 B/50 °C 97
Temperature

1. The value above is the representative value of the NP or representative color and may have deviation. It can only be used for selecting materials.
2. The value above shall not be regarded as a material specification and cannot be used for molding designs.

Information inserted in this document such as data, statements, representative values, etc. are provided solely for customer convenience. It does not expressly or impliedly guarantee
anything regarding the safety or practicability of the (1) materials, (2) products, and/or (3) design that utilizes recommendations or proposals, of Samsung SDI Chemical. Furthermore,
nothing in the contents of this document shall have any legal binding effect, and especially, the representative value is simply for reference and is not a minimum value that has legal
binding effect.
Whether materials and/or products of Samsung SDI Chemical and/or a design that uses or utilizes Samsung SDI Chemical’s recommendations or proposals are (is) compatible with individual
uses shall be determined solely by each user and such user shall be solely responsible for any results, including but not limited to, any and all loss and damages incurred due to such uses.
Users must implement and verify all testing and analyses for proving the safety and compatibility of final products that have been created or altered by using Samsung SDI Chemical’s
materials or products. The data and values inserted and/or contained in this document may be changed due to quality improvement of the product without any prior notification.

The last update date : 05/13/2014

ASTM_189704_20151127

You might also like