Fabrica de Parques

Infantis. Mobilario
Urbano e Ftness Ao
Ar Livre

TRIANGULAR CYCLE RACK

Ref. TCR
TECHNICAL DATA SHEET

ZONA INDUSTRIAL DO CASAL DA

AREIA RUA A, LOTE 90 2460-392 COZ
| ALCOBAÇA PORTUGAL

+351 262 540 010

+351 262 540 018
[email protected]

1
 STREET FURNITURE - TECHNICAL DATA SHEET

CYCLE RACK – LF09

Fabrica de Parques
Infantis. Mobilario
Urbano e Ftness Ao
Ar Livre

Technical description:

Bicycle rack with triangular shape, for a landmark architecture application

TRIANGULAR CYCLE RACK and exceptionally sized as per International Safety, Quality Standards and
Ref. TCR
TECHNICAL DATA SHEET EN & ASTM Norms.
Structure in cast aluminium powder coated in standard RAL colour (Client
to confirm the RAL colour, please refer to below Colour Chart). Aluminium
structure is treated against UV and weather effect. Adequately sanded
and dried material and its coating for suitable outdoor application.
Colour: Grey
Fixation: Surface mounted with embedded anchors.

Dimensions:

Cycle rack
ZONA INDUSTRIAL DO CASAL DA L 305 mm
AREIA RUA A, LOTE 90 2460-392 COZ
| ALCOBAÇA PORTUGAL
W 70 mm
+351 262 540 010
+351 262 540 018 H 851 mm
[email protected]

2
 STREET FURNITURE - TECHNICAL DATA SHEET

TECHNICAL DETAILS:

Fabrica de Parques
Infantis. Mobilario
Urbano e Ftness Ao
Ar Livre

TRIANGULAR CYCLE RACK

Ref. TCR
TECHNICAL DATA SHEET

ZONA INDUSTRIAL DO CASAL DA REFERENCE IMAGES

AREIA RUA A, LOTE 90 2460-392 COZ
| ALCOBAÇA PORTUGAL

+351 262 540 010

+351 262 540 018
[email protected]
Products are manufactured with quality and certified materials. Such as certified steel
and treated wood sourced from sustainable FSC forests. 3
 STREET FURNITURE - TECHNICAL DATA SHEET

STANDARD RAL COLOUR CHART

Fabrica de Parques
Infantis. Mobilario
Urbano e Ftness Ao
Ar Livre

CIRCULA
TRIANGULAR CYCLE RACK
Ref. TCR
TECHNICAL DATA SHEET

ZONA INDUSTRIAL DO CASAL DA

AREIA RUA A, LOTE 90 2460-392 COZ
| ALCOBAÇA PORTUGAL

+351 262 540 010

+351 262 540 018
[email protected]
Products are manufactured with quality and certified materials. Such as certified steel
and treated wood sourced from sustainable FSC forests. 4
METAL FINISHES
 METAL FINISHING
Veco Urban Design metal outdoor furniture is finished using Veco Urban Design’s exclusive
Pangard II® Polyester Powder coat System. The Pangard II® multi-step system of cleaning, priming
and powder coating produces the finest metal finish available for site furniture. It provides an
attractive, durable metal finish that
· prevents corrosion
· is extremely hard
· retains sufficient flexibility to resist cracking and chipping
· is UV stable
· is impact resistant
· has outstanding gloss retention
Fabrica de Parques · has excellent abrasion resistance
Infantis. Mobilario · has good chemical resistance
Urbano e Ftness Ao Pangard II® polyester powder coat is lead free, hazardous air pollutant (HAPS) free, does not
Ar Livre generate hazardous waste, and contains less than 1% Volatile Organic Compounds (VOC’s).

METAL PREPARATION AND CLEANING

Rigorous preparation is key to a successful finish. At Veco Urban Design this begins with brushing,
grinding, filing or sandblasting welded parts to remove carbon and prepare the metal for cleaning
and pre-treatment.
· Products are cleaned using a heated wash to degrease and remove surface oils.
· A zinc phosphate pre-treatment is applied. The zinc finish builds a structure with good bite and
hold for coating and is highly resistant to corrosion creep.
· Some aluminum extrusions get a paintable anodic coating for paint adhesion and corrosion
resistance. Unlike many site furniture manufacturers that use an iron phosphate or sandblasting
pre-treatment on metal products, Veco Urban Design uses zinc phosphate because it produces a
more durable finish than either of these two methods. The sacrificial zinc gives the treated metal
self-healing properties. Under abuse in the field, even if the finish is cut or scraped right down to
the metal, the layer of zinc helps prevent corrosion creep.

EPOXY UNDERCOAT
An epoxy undercoat (e-coat) is applied to steel and aluminum products. The e-coat provides strong
cohesion to the zinc substrate pre-treatment with additional protection for the metal and acts as a
moisture barrier between the substrate and the final finish. It penetrates all crevices, including
those not readily reached by powder coating, to protect against corrosion. When reheated during
the powder coating process, it provides a good foundation for adhesion to the powder coat. The e-
coat is oven cured in preparation for powder coat applications.

POWDER COAT FINISH

E-coated steel and aluminum products are thoroughly cleaned, rinsed and dried to remove oils,
dust and debris in
preparation for powder coat.
Two coats of powder coat are applied, with oven curing after each application.
All brackets and connectors are finished along with product parts to ensure uniformity of color.
The topcoat is applied over the primer and parts are again cured in an oven.
This heating process cross-links the coating and fuses it to the prime coat.
The topcoat adds depth to the finish and provides color and gloss protection. The average film
thickness for most
colors is six mils.
ZONA INDUSTRIAL DO CASAL
DA AREIA
RUA A, LOTE 90
2460-392 COZ | ALCOBAÇA

+351 262 540 010

+351 262 540 018
[email protected]
 Veco Urban Design uses the most technologically advanced application equipment available. The
application equipment on our paint lines provide complete coverage even in hard-to-reach areas;
uniformity of thickness; and improved charging of powder particles to achieve optimal transfer
efficiency and limit waste. The result of this multi-step process is beautiful, impact-, light-,
weather– and corrosion-resistant furniture that is exceptionally
durable and prepared for many years of active use with minimal maintenance.

Maintenance
The Pangard II® polyester powder coat finish requires minimal routine maintenance. Surface dirt
may be removed with
Fabrica de Parques a brush or sponge and water mixed with a mild detergent. High pressure washing (not to exceed
Infantis. Mobilario 500psi) with a mild detergent removes stubborn dirt. Steam cleaning is not recommended.
Urbano e Ftness Ao
Ar Livre ANODIZED FINISH
Anodizing aluminum is a highly controlled oxidation process, creating a finish that is durable and
corrosion-resistant. It is composed entirely of aluminum oxide. This finish is not applied to the
surface like paint, but is fully integrated with the underlying aluminum substrate, so it will not chip
or peel.

DURABILITY: Anodizing is a chemical reactive finish that has complete bonding with the underlying
aluminum.

MAINTENANCE: Rinsing or washing with mild soap and water will usually restore the anodized
finish to its original appearance.

COLOR: Anodizing aluminum allows it to retain its metallic appearance, while still offering
resistance to chipping and peeling.

HEALTH: The anodized finish is chemically stable, will not decompose and is nontoxic. Because the
process is a reinforcement of a naturally occurring process, it is non-hazardous and produces no
harmful by-products.

ZONA INDUSTRIAL DO CASAL

DA AREIA
RUA A, LOTE 90
2460-392 COZ | ALCOBAÇA

+351 262 540 010

+351 262 540 018
[email protected]
IGP-DURA®face 581M Technical Data
Fine structure, matt
Sheet
Facade quality
Matt, weather-resistant fine structure powder on saturated
polyester resin base, incl. the appropriate hardener, and special
heat, light and chalk resistant pigments.

Properties Product range

• Excellent light and weather resistance Surface appearance
• Impact-proof surface with decorative fine • 581MA, fine structure, matt
structure effect • 581ME, fine structure, matt, with
• Good elasticity pearl-mica effect
• Non-yellowing in direct-heat gas ovens
Colour shades
Application Mainly RAL and NCS shades, colour shades
as shown in the IGP colour chart
• Facade elements, window profile sections
“Eisenglimmer-Effekt“, as well as special
• Garden and camping furniture
house shades.
• Machine casings, switchgear cabinets
• Lights
• Bicycle frames Powder specifications
• Agricultural machinery • Particle size: < 100 µm
• Railing sections • Solids: approx. 99%
• Density acc. to shade: 1.3 - 1.6 kg/l
• Storage stability: min. 24 months
• Storage temperature: < 25 °C

Packing
• Carton with antistatic PE bag liner,
capacity 20 kg,
• Carton container with 25 antistatic
PE bags, 20 kg each; capacity 500 kg

IGP Pulvertechnik AG
Material approvals: Ringstrasse 30
GSB No. 109n, class «standard» CH-9500 Wil
Qualicoat No. P-0561, class 1 Telefon +41 (0)71 929 81 11
Telefax +41 (0)71 929 81 81
Article-specific safety data sheet and www.igp-powder.com
further risk management measures at: [email protected]

www.igp-powder.com www.doldgroup.com
 IGP-DURA®face 581M

Processing instructions Technological values

Pre-treatment To determine the following data, IGP-DURA®face 581MA/E
The substrate to be coated must be free of oxidation was applied as follows:
products, or residue from scale, oil, grease or release • Aluminium sheet (AlMg1) 0.8 mm, chromatised
agents. • Coating thickness 80 µm
• Object temperature 180 °C, 10 min
Aluminium substrate
Chromating: DIN EN 12487 Gloss class, DIN EN ISO 2813
Chrome-free pre-treatment: possible option 581MA 10-20 R’/60°
Pre-anodisation: possible option 581ME 5-25 R’/60°
Cross-cut adhesion test, DIN EN ISO 2813 Gt 0
Steel substrate Mandrel bending test, DIN EN ISO 1519 < 5 mm
Zinc or iron (Fe) phosphating Impact penetr., ASTM D2794 20 inchp.
Galvanised sheet metal: Erichsen cupping, DIN EN ISO 1520 > 5 mm
IGP Pulvertechnik AG . Ringstrasse 30 . CH-9500 Wil . Tel. +41 (0)71 929 81 11 . Fax +41 (0)71 929 81 81 . www.igp-powder.com . [email protected]

Chromatising in accordance with DIN EN 12487 Buchholz hardness, DIN EN ISO 2815 > 80

For improved corrosion protection for applications on Accelerated weathering-test

steel / galvanised steel, the use of corrosion protection DIN EN ISO 16474-2: > 50% residual gloss after 1000h.
primer IGP-KORROPRIMER 10 is recommended. The QUV/SE-B-313, DIN EN ISO 16474-3/ASTM G-53-88:
suitability of the pre-treatment method used is generally after 300 h > 50% residual glosses
to be tested by the coater in advance with appropriate
test methods. The minimum requirement for aluminium Weathering
substrates / galvanised steel components intended for 1 year Florida, 5° south: > 50% residual gloss,
architectural applications is performing a boil test / DIN EN ISO 2810.
pressure cooker test with a subsequent cross-cut
adhesion and pull-off test. We refer to the guidelines of 1000h condensation water test, DIN EN ISO 6270-2:
the GSB certifications and Qualicoat. no infiltration, no blisters.
For further information: see also our special leaflet on
pre-treatment (IGP-TI 100). 1000h salt spray test, DIN EN ISO 9227:
no infiltration, no blisters.
Coating equipment
All commercially available electrostatic systems, both Mortar resistance, ASTM D 3260:
corona and Tribo charge systems. Exceptions are Pearl Easily removable after 24h with no residues.
Mica effects, IGP-DURA®face 581ME which must be
processed only with corona charging. Cleaning
Relevant regulations: VDE requirements and VDM data Coated parts to be cleaned in compliance with the
sheet 24371. regulations RAL-GZ 632 or SZFF 61.01.
For pearl-mica effect, the Technical Information IGP-TI 106
Recycling must also be observed.
Small portions of recycled powder should be added,
automatically if possible, to the fresh powder. Note
Important:
Our technical advice on application, given verbally, in wri-
Keep overspray to an absolute minimum.
ting or through trials is provided to the best of our know-
Processing instruction VR 201 must be observed.
ledge but is too regarded solely as non-binding information
and does not release you from the need to carry out your
Stoving conditions
own tests and trials.
The temperature and time combinations resulting in
Application, use and processing of the products take place
optimum cross-linking of the coating are shown.
outside our control and are therefore exclusively within
your own responsibility.
Objecttemperature Retendion time at object
minimal maximum
01.16 . TDS face 581M / V9 . WM

170 °C 15 min 30 min

180 °C 10 min 20 min
190 °C 5 min 10 min

You are advised to carry out practical trials adapted to

the object in question and the stoving oven in order
to determine the optimum stoving conditions.
Our Technical Department will be glad to help.
 TECHNICAL DATASHEET
7L-100 C-POX® S100
Multi-purpose epoxy
Revision: May 2016

PRODUCT DESCRIPTION C-Pox S100 is a multi-purpose epoxy. Its main properties are:

• Excellent durability in both marine and industrial environments.

• Compatible over inorganic zincs primers.
• Outstanding chemical resistance.
• Suitable for immersion service.
• Self-priming, economical, long-term protection.
• Adheres to a variety of substrates such as steel, aluminium, stainless steel, concrete
and previously coated surfaces.
• Fulfils norm UNE 48272:2003 (check details under “Approvals and Certificates”)
• Forms part of the corrosivity systems with category C5I/C5M according to EN ISO
12944-6. (check details under “Approvals and Certificates”)

INTENDED USES C-Pox S100 is a high build polyamide epoxy coating with high solids content designed for
industrial and marine use. It adheres strongly to bare steel, and inorganic zinc primers and
silicate coatings on new construction, repairs and field maintenance projects. C-Pox S100
provides and excellent barrier to corrosion. C-Pox S100 may be overcoated with itself in non-
immersion conditions for an unlimited period.
Marine – Decks, superstructures and ballast tanks of ships, barges and workboats.
Industrial – Tank exteriors, structural steel pipes in water treatment plants, refineries, pulp and
paper mills and waste water treatment plants. Offshore platforms, jetties and other structures
exposed to severe weathering, water, salt spray, immersion or aggressive chemical
environments.
C-Pox S100 is an alternative for traditional coaltar epoxies and is suitable for immersion in both
salt and fresh water. It is specifically suitable as marine ballast water tanklining.

PROPERTIES Finish Matt

Colour Grey 7135. Other colours; on request

Components 2

Mixing ratio (volume) Resin 7L-101 1 part

Cure 7L-102 1 part

Pot-life 3 hours at 20ºC

Volume solids 68% (ISO 3233)

Slight variations ±3% may occur due to colour and testing variances.

Specific weight 1,42 g/mL

Dry film thickness 100 – 200 µm per coat

1/3

We recommend that the technical data sheet is periodically checked to ensure that it is the most recent version. CIN guarantees that its products conform to the
specifications as detailed in the respective technical data sheets. CIN cannot under any circumstances be held responsible for the consequences of technical information
given prior to or after purchase of products. This is merely of an advisory nature, given in good faith and to the best of its knowledge, and based on current technical
know-how. Claims can only be accepted for products which have manufacturing defects or which do not conform to the purchase order. CIN will, at its discretion, either
replace the defective goods or reimburse the customer. CIN cannot accept responsibility for any other loss or damage. All sales are subject to our general terms and
conditions of sales that we advise should be read carefully.

CIN - Corporação Industrial do Norte, S.A. - Av de Dom Mendo, nº 831 (antes EN13 km6) - 4474-009 Maia - Portugal - T +351 229 405 000 - [email protected] - Capital Social € 25.000.000 - C.R.C. da Maia / NIPC: 500 076 936
CIN Industrial Coatings, S.A. - Av. de Dom Mendo, nº 330 - 4474-009 Maia - Portugal - T +351 229 405 000 - [email protected] - Capital Social € 2.250.000 - C. R. C. da Maia / NIPC 504 160 583
Tintas Cin Angola, S.A. - R. Pedro Álvares Cabral, nº 21 - Cx Postal 788 - Benguela - Angola - T +244 222 397 527 - [email protected] - Cap.Soc. 10.000.320,00 Kz - Contrib. 5403076425 - C.R.C. Benguela nº 4.601, fls. 62, Livº E-22
Tintas Cin de Moçambique, S.A. - Av. das Indústrias, 2507 - Machava - Moçambique - T +258 21 748 012 - [email protected] - Cap. Soc. 2.000.000,00 MT - NUIT 400006857 - C.R.C. Maputo nº 5.165, fls. 11, Livº C-14
CIN Valentine, S.A.U. - P. I. Can Milans - Riera Seca, 1 - 08110 Montcada i Reixac - España - T +34 93 565 66 00 - [email protected] - C. Soc. € 10.000.000 - CIF A-61356713 - Reg. M. Barcelona, T 44576, F 11, H B-160105, I. 59ª
Pinturas CIN Canárias, S.A.U. - P. I. Güimar, Manzana 13, Parcela 2 - 38509 Güimar - Tenerife - T +34 902 422 428 - [email protected] - C. Soc. € 1.804.000 - CIF A38453817 - Reg. M. Sta Cruz Tenerife, T 1483, F 149, H TF-15033
Celliose Coatings, S.A. - Chemin de la Verrerie - BP 58 - 69492 Pierre Bénite Cedex - France - T +33 (0) 4 72 39 77 77 - [email protected] - C. Soc. € 2.215.755 - TVA FR07775643976 - RCS de Lyon B 775 643 976
 TECHNICAL DATASHEET
7L-100 C-POX® S100
Multi-purpose epoxy
Revision: May 2016

Number of coats Minimum: 2

For immersion service; apply 2 coats of C-Pox S100 at a minimum
of 300 µm total dry film thickness.

Application method Airless or conventional spray.

Touch up of small areas can be made by brush or roller.

Theoretical coverage 6,8 m²/L at 100µm

3,4 m²/L at 200µm
Allow for application losses, surface irregularities, etc.

Drying times at 20ºC:

To touch 2 hours
Dry through 16 hours
Recoat : Min: 16 hours – Max: Unlimited

Drying times are dependent on temperature, ventilation and

film thickness

SURFACE PREPARATION Primed steel – Coating performance is proportional to the degree of surface preparation. Refer to
specifications of the specific primer being used. Prior to coating, primed surface must be clean,
dry, undamaged and free of all contaminants including salt deposits. Round of all rough welds
and remove weld spatter.

APLICATION Add cure to resin solution and stir material for 5 minutes. In confined areas ventilate with clean
air during application and drying until solvents are removed.

Environmental applications
Air temperature 5 - 50ºC
Surface temperature 3ºC above dew point

Application Equipment:
Conventional spray Recommended
Fluid tip orifice size 0,070 – 0,086 inches (1,77 – 2.18 mm)
Air pressure 3,5 – 5,3 kg/cm²
Fluid pressure 3,1 – 3,9 kg/cm²
Thinning 5 – 10 %

Airless spray Recommended

Fluid tip orifice size 0,017 – 0,023 inches (0.43 – 0.63 mm)
Fluid pump 30 : 1 – 45 : 1
2
Fluid pressure 150 – 170 kg/cm
Thinning 0–7%

Thinner 7S-902.0000 (CP-40)

Cleaner 7S-902.0000 (CP-40)

2/3

We recommend that the technical data sheet is periodically checked to ensure that it is the most recent version. CIN guarantees that its products conform to the
specifications as detailed in the respective technical data sheets. CIN cannot under any circumstances be held responsible for the consequences of technical information
given prior to or after purchase of products. This is merely of an advisory nature, given in good faith and to the best of its knowledge, and based on current technical
know-how. Claims can only be accepted for products which have manufacturing defects or which do not conform to the purchase order. CIN will, at its discretion, either
replace the defective goods or reimburse the customer. CIN cannot accept responsibility for any other loss or damage. All sales are subject to our general terms and
conditions of sales that we advise should be read carefully.

CIN - Corporação Industrial do Norte, S.A. - Av de Dom Mendo, nº 831 (antes EN13 km6) - 4474-009 Maia - Portugal - T +351 229 405 000 - [email protected] - Capital Social € 25.000.000 - C.R.C. da Maia / NIPC: 500 076 936
CIN Industrial Coatings, S.A. - Av. de Dom Mendo, nº 330 - 4474-009 Maia - Portugal - T +351 229 405 000 - [email protected] - Capital Social € 2.250.000 - C. R. C. da Maia / NIPC 504 160 583
Tintas Cin Angola, S.A. - R. Pedro Álvares Cabral, nº 21 - Cx Postal 788 - Benguela - Angola - T +244 222 397 527 - [email protected] - Cap.Soc. 10.000.320,00 Kz - Contrib. 5403076425 - C.R.C. Benguela nº 4.601, fls. 62, Livº E-22
Tintas Cin de Moçambique, S.A. - Av. das Indústrias, 2507 - Machava - Moçambique - T +258 21 748 012 - [email protected] - Cap. Soc. 2.000.000,00 MT - NUIT 400006857 - C.R.C. Maputo nº 5.165, fls. 11, Livº C-14
CIN Valentine, S.A.U. - P. I. Can Milans - Riera Seca, 1 - 08110 Montcada i Reixac - España - T +34 93 565 66 00 - [email protected] - C. Soc. € 10.000.000 - CIF A-61356713 - Reg. M. Barcelona, T 44576, F 11, H B-160105, I. 59ª
Pinturas CIN Canárias, S.A.U. - P. I. Güimar, Manzana 13, Parcela 2 - 38509 Güimar - Tenerife - T +34 902 422 428 - [email protected] - C. Soc. € 1.804.000 - CIF A38453817 - Reg. M. Sta Cruz Tenerife, T 1483, F 149, H TF-15033
Celliose Coatings, S.A. - Chemin de la Verrerie - BP 58 - 69492 Pierre Bénite Cedex - France - T +33 (0) 4 72 39 77 77 - [email protected] - C. Soc. € 2.215.755 - TVA FR07775643976 - RCS de Lyon B 775 643 976
 TECHNICAL DATASHEET
7L-100 C-POX® S100
Multi-purpose epoxy
Revision: May 2016

ADDITIONAL Curing mechanism – By solvent release and reaction between components

INFORMATION
Volatile Organic Compounds (COV)
EU limit for this product (cat. A/j): 500 g/L.

This product contains max. 374 g/L COV (TVOCC: 28%) *)

Supplying form: < 325 g/L (TVOC: < 23%)
VOC Thinner: 863 g/L (TVOC: 100%)
VOC Cleaner: 863 g/L (TVOC: 100%)

*) The VOC value shown above refers to a ready for use product, as tinted, thinned, etc in
accordance with our recommendations. We are not responsible for products obtained by mixing
products with are different from those we have recommended and we must draw attention to the
responsibility of anyone involved within the supply chain not to infringe Directive 2004/12/CE.

Flash Point (Closed Cup)

Resin 26ºC
Cure 26ºC
Thinner 4ºC
Cleaner 4ºC
Packaging
Resin 10 L
Cure 10 L
Storage
Stored indoors in original containers at 5 to 40ºC, Resin: 2 years, Cure: 1 year.

APPROVALS AND Corrosivity category C5I/C5M according to EN ISO 12944-6, high durability of paintings
CERTIFICATES systems:
C-Pox Primer ZN860 75 µm
C-Pox S100 150 µm
C-Thane RPS HS 80 µm

C-Pox ST165 MP-WN 125 µm

C-Pox S100 125 µm
C-Thane RPS HS 50 µm

Fulfils norm UNE 48272:2003 "Recoatable intermediate epoxy coating”, with the exception of
solvent resistance.

HEALTH, SAFETY AND THE Protect the eyes and skin from contact, gloves, goggles and appropriate clothing should be worn.
ENVIRONMENT Keep out of the reach of children. Use only in well ventilated areas. Do not empty into drains.
Keep the container properly sealed and stored in the correct place. Take correct measures when
transporting the product so as to avoid any accidents that could rupture the can or cause
damage to the packaging. Ensure that the container is correctly stacked in a safe area. Do not
store or use the product in extreme temperature conditions. Always take account of the
appropriate legislation relating to the environmental and Health and Safety at Work.
For more information it is essential to read the label on the container and the product
MATERIAL SAFETY DATA SHEET of this product, its components and all complementary
products referred on Technical Data Sheet.

3/3

We recommend that the technical data sheet is periodically checked to ensure that it is the most recent version. CIN guarantees that its products conform to the
specifications as detailed in the respective technical data sheets. CIN cannot under any circumstances be held responsible for the consequences of technical information
given prior to or after purchase of products. This is merely of an advisory nature, given in good faith and to the best of its knowledge, and based on current technical
know-how. Claims can only be accepted for products which have manufacturing defects or which do not conform to the purchase order. CIN will, at its discretion, either
replace the defective goods or reimburse the customer. CIN cannot accept responsibility for any other loss or damage. All sales are subject to our general terms and
conditions of sales that we advise should be read carefully.

CIN - Corporação Industrial do Norte, S.A. - Av de Dom Mendo, nº 831 (antes EN13 km6) - 4474-009 Maia - Portugal - T +351 229 405 000 - [email protected] - Capital Social € 25.000.000 - C.R.C. da Maia / NIPC: 500 076 936
CIN Industrial Coatings, S.A. - Av. de Dom Mendo, nº 330 - 4474-009 Maia - Portugal - T +351 229 405 000 - [email protected] - Capital Social € 2.250.000 - C. R. C. da Maia / NIPC 504 160 583
Tintas Cin Angola, S.A. - R. Pedro Álvares Cabral, nº 21 - Cx Postal 788 - Benguela - Angola - T +244 222 397 527 - [email protected] - Cap.Soc. 10.000.320,00 Kz - Contrib. 5403076425 - C.R.C. Benguela nº 4.601, fls. 62, Livº E-22
Tintas Cin de Moçambique, S.A. - Av. das Indústrias, 2507 - Machava - Moçambique - T +258 21 748 012 - [email protected] - Cap. Soc. 2.000.000,00 MT - NUIT 400006857 - C.R.C. Maputo nº 5.165, fls. 11, Livº C-14
CIN Valentine, S.A.U. - P. I. Can Milans - Riera Seca, 1 - 08110 Montcada i Reixac - España - T +34 93 565 66 00 - [email protected] - C. Soc. € 10.000.000 - CIF A-61356713 - Reg. M. Barcelona, T 44576, F 11, H B-160105, I. 59ª
Pinturas CIN Canárias, S.A.U. - P. I. Güimar, Manzana 13, Parcela 2 - 38509 Güimar - Tenerife - T +34 902 422 428 - [email protected] - C. Soc. € 1.804.000 - CIF A38453817 - Reg. M. Sta Cruz Tenerife, T 1483, F 149, H TF-15033
Celliose Coatings, S.A. - Chemin de la Verrerie - BP 58 - 69492 Pierre Bénite Cedex - France - T +33 (0) 4 72 39 77 77 - [email protected] - C. Soc. € 2.215.755 - TVA FR07775643976 - RCS de Lyon B 775 643 976