Scribd
Upload
328 views

API 5L Grade X65 Pipe Chemical Composition and Mechanical Properties

API 5L Grade X65 pipe has the following chemical composition and mechanical properties: The chemical composition for seamless and welded X65 pipe must have a maximum of 0.28% carbon, 1.40% manganese, 0.030% phosphorus, and 0.030% sulfur. Higher strength X65Q and X65M seamless and welded pipe have lower maximums for carbon, phosphorus, and sulfur. The minimum yield strength is 450 MPa for all grades, while the minimum tensile strength is 535 MPa for the pipe body and welded seam. X65Q and X65M grades have higher maximum yield strengths up to 600 MPa and tensile strengths

Uploaded by

GEORGE VARGAS
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
328 views

API 5L Grade X65 Pipe Chemical Composition and Mechanical Properties

API 5L Grade X65 pipe has the following chemical composition and mechanical properties: The chemical composition for seamless and welded X65 pipe must have a maximum of 0.28% carbon, 1.40% manganese, 0.030% phosphorus, and 0.030% sulfur. Higher strength X65Q and X65M seamless and welded pipe have lower maximums for carbon, phosphorus, and sulfur. The minimum yield strength is 450 MPa for all grades, while the minimum tensile strength is 535 MPa for the pipe body and welded seam. X65Q and X65M grades have higher maximum yield strengths up to 600 MPa and tensile strengths

Uploaded by

GEORGE VARGAS
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

API 5L Grade X65 Pipe

Chemical Composition and Mechanical Properties

Chemical Composition
Mass fraction, based upon heat and product analyses
%
Steel grade (Steel name)
C Mn P S
max max max max
PSL 1 pipe with t ≤ 25.0 mm (0.984 in)
Seamless pipe
X65 0.28 1.40 0.030 0.030
Welded pipe
X65 0.26 1.45 0.030 0.030
PSL 2 pipe with t ≤ 25.0 mm (0.984 in)
Seamless pipe
X65Q 0.18 1.70 0.025 0.015
Welded pipe
X65M 0.12 1.60 0.025 0.015

Mechanical Properties
Weld seam of EW,
Pipe body of seamless and welded pipes LW, SAW and
Pipe grade COW pipes
Yield strength Tensile strength Tensile strength
MPa (psi) MPa (psi) MPa (psi), min
API 5L X65 PSL 1 pipe
minimum minimum
X65
450 (65 300) 535 (77 600)
535 (77 600)
API 5L X65 PSL 2 pipe
X65Q minimum maximum minimum maximum
X65M 450 (65 300) 600 (87 000) 535 (77 600) 760 (110 200)

For more info please visit https://www.octalsteel.com/resources/api-5l-x65-pipe

You might also like