Aquatech International Corporation June 10, 2008
Client: Occidental Mukhaizna - Oman
P.O. NO: 400000668
Serial#: E257C564
Proposal No: HOJF06-05-31 01
Item No: 62-P-XX004 Rev.# 1
Attn: Deepa Sharma
MODEL:3180 XL SIZE:20x20-25/5V QTY: 7
Operating conditions
SERVICE Effect 1 Evaporator Recirculation Pump
LIQUID Concentrated Brine Solids concentr. 8.0% , Temp. 236.0 deg F,
Vapor Pres. 15.30 psi abs, SP.GR 1.010, Viscosity 1.000 cp
CAPACITY Rated 17,000.0 gpm
HEAD 74.0 (ft)
Performance at 960 RPM
PUBLISHED EFFY 87.0% (CDS)
RATED EFFY 86.5% with contract seal
RATED POWER 370.9 hp (incl. Mech. seal drag 0.51). (Run out 327.8 hp NOL 375.0
hp)
NPSHR 29.7 ft (available NPSH is 33.0 ft)
DISCH PRESSURE(R) 47.1 psi g (57.6 psi g @ Shut off) Based on 14.3 psi g Suc.press
PERF. CURVE 4223-4 (Rotation CW viewed from coupling end)
SHUT OFF HEAD 99.0 ft
MIN. FLOW Continuous Stable: 9,070.3 gpm Hydraulic: 9,070.3 gpm Thermal: N/A
Materials
CONSTRUCTION A890 Grade 5A Duplex SS
CASING A890 Grade 5A Duplex SS
ST.BOX COVER A890 Grade 5A Duplex SS
IMPELLER A890 Grade 5A Duplex SS - Open (20.7500 in rated, max=24.0300 in, min=18.4055 in)
SHAFT MATERIAL Steel 4340
SHAFT SLEEVE Super Duplex 2507 or higher alloy
LUBRICATION Flood oil
SEAL CHAMBER Taper bore plus with VPE
BEARINGS NUP 317ECP (Inboard) 7318 BEAGY (Outboard)
COUPLING Rexnord - Rexnord ES-80-S.F. 1.00
COUPLING GUARD Steel
BASEPLATE Advantage galvanized steel baseplate with 4 transverse motor adjusters and vertical leveling screws
Sealing Method
MECHANICAL SEAL AES Double Cartridge CDSA (T2) SiC/SiC/A // SiC/C/V - (Cartridge - Double)
Casing connections
Hastelloy C Plugs Upgrade - Drain; Suction/Discharge Gauge; Bypass
Drain; Suction/Discharge gauge; Bypass
Flanges
Page 1
Proposal No: HOJF06-05-31 01 Item No: 62-P-XX004 Rev.#: 1 MODEL: 3180 XL 20x20-25/5V
150# raised face
Liquid end features
Impeller balanced to ISO 1940 G6.3
Frame features
Labyrinth oil seals - VBXX-D bronze isolator
Piping
CPI Plan 7354 no piping furnished by Goulds
Documentation
Mark center of gravity
Engineered drawing packages - Non std (up to 10 copies-price per service) (Qty 1)
Material Certificate of Compliance (Qty 1)
Testing
Non witnessed running performance test (Qty 1)
Non witnessed NPSH test (requires performance test) (Qty 1)
Non witnessed casing hydrostatic-test
Baseplate Features
Baseplate electrical grounding pads - (2), welded and at opposite ends
Longitudinal motor adjusters
Any SS shims necessary for motor adjustment will be provided by SFO (for field mounted units)
Baseplate drilling for IEC motor (4 bases for IBD mounted motors will not be drilled)
Field Service / Repair
Field service supervision - installation & start-up 1 trip, 3 days/trip all-inclusive cost by local rep, IBD (Qty 1)
Mounting & alignment of 4 of 14 motors at IBD (Arabian Industries) shop (Qty 1)
Miscellaneous
316SS nameplate
Subject to final inspection by customer at factory
Preparation for Long term storage
Extended Warrranty Term - 26 months from shipment or 12 months from start-up whichever comes first
Painting
Goulds Blue standard painting
Driver : Electric motor Manufacturer : Westinghouse
FURNISHED BY Pump mfg MOUNTED BY Pump mfg
RATING 315.00 kW (422.4 HP) ENCLOSURE TECO Westinghouse TEAAC with standard 1.0
service factor
PHASE/FREQ/VOLTS 3/50 Hz/11000 SPEED 1000 RPM
INSULATION/SF F/1.00 FRAME 450SPL
Page 2
Proposal No: HOJF06-05-31 01 Item No: 62-P-XX004 Rev.#: 1 MODEL: 3180 XL 20x20-25/5V
Driver Features
Stainless steel nameplate
Swaged rotor bars
Copper/copper alloy fabricated rotor construction
Unwitnessed factory commercial test
Motor freight to Goulds facility (Shipping from Taiwan)
Motor nominal noise leve of 85 dbA at 3 feet
Bearing RTD, 100 ohm platinum, 1 per bearing
Stator RTD, 100 ohm platinum, 2 per phase
Oversized terminal box IP65
Motor space heater
Complete vacuum pressure impregnation (VPI) cycle
Class F insulation system
Weights
TOTAL NET UNIT WEIGHT 16,531.0 lb
Comments
Pump Tag will be: 62-P-XX004 (the XX will be 01 through 07)
Motor Tag will be: 62-P-XX004-M (the XX will be 01 through 07)
TECO Westinghouse motor frame increased to 450SPL, motor redesign for pump speed-torque curve
characteristics.
8 wt% TDS, 0 to 10 wt% TSS, 5 to 20 micron average concentrated brine slurry.
AES CDSA cartridge double mechanical seal with silicon carbide/silicon carbide inboard faces, silicon
carbide/carbon outboard faces, Aflas elastomers inboard, Viton elastomers outboard, Titanium grade 2
alloy normal wetted hardware.
Program Version 1.26.0.1
Our offer does not include specific review and incorporation of any Statutory or Regulatory Requirements and the offer is limited to
the requirements of the design specifications. Should any Statutory or Regulatory requirements need to be reviewed and incorporated
then the Customer is responsible to identify those and provide copies for review and revision of our offer.
Our quotation is offered in accordance with our comments and exceptions identified in our proposal.
Page 3
Model: 3180 Size: 20x20-25 Group: XL 50Hz RPM: 960 Stages: 1
Job/Inq.No. : P-30025 Occidental Mukhaizna Recirc Pump
Purchaser : Aquatech International Corporation
End User : Occidental Mukhaizna LLC - Issued by : Kang Choi
Oman
Item/Equip.No. : 62-P-XX004 Quotation No. : HOJF06-05-31 01 Date : 06/10/2008
Service : Effect 1 Evaporator Recirculation Pump
Order No. : 400000668 Certified By :
Operating Conditions Pump Performance
Liquid: Concentrated Brine Actual Pump Eff.: 86.5 % Suction Specific Speed: 10,609 gpm(US) ft
Temp.: 236.0 deg F Actual Pump Power: 370.9 hp Min. Hydraulic Flow: 9,070.3 gpm
S.G./Visc.: 1.010/1.000 cp Total Power Loss: 0.51 hp Min. Thermal Flow: N/A
Flow: 17,000.0 gpm Rated Total Power: 370.9 hp
TDH: 74.0 ft Imp. Dia. First 1 Stg(s): 20.7500 in
NPSHa: 33.0 ft NPSHr: 29.7 ft Non-Overloading Power: 375.0 hp
Solid size: Shut off Head: 99.0 ft
% Solids: 8.0 Vapor Press:
Max. Solids Size: 2.7559 in
Notes: 1. Power and efficiency Losses are not reflected on the curve below.
2. Elevated temperature effects on performance are not included.
Aquatech International Corporation June 10, 2008
Client: Occidental Mukhaizna - Oman
P.O. NO: 400000668
Serial#: E257C571
Proposal No: HOJF06-05-31 01
Item No: 62-P-XX006 Rev.# 1
Attn: Deepa Sharma
MODEL:3180 XL SIZE:20x20-25/5V QTY: 7
Operating conditions
SERVICE Effect 2 Evaporator Recirculation Pump
LIQUID Concentrated Brine Solids concentr. 20.0% , Temp. 224.0 deg F,
Vapor Pres. 15.30 psi abs, SP.GR 1.110, Viscosity 1.000 cp
CAPACITY Rated 17,000.0 gpm
HEAD 74.0 (ft)
Performance at 960 RPM
PUBLISHED EFFY 87.0% (CDS)
RATED EFFY 86.5% with contract seal
RATED POWER 407.7 hp (incl. Mech. seal drag 0.51). (Run out 360.9 hp NOL 413.1
hp)
NPSHR 29.7 ft (available NPSH is 33.0 ft)
DISCH PRESSURE(R) 51.8 psi g (63.4 psi g @ Shut off) Based on 15.7 psi g Suc.press
PERF. CURVE 4223-4 (Rotation CW viewed from coupling end)
SHUT OFF HEAD 99.2 ft
MIN. FLOW Continuous Stable: 9,067.9 gpm Hydraulic: 9,067.9 gpm Thermal: N/A
Materials
CONSTRUCTION A890 Grade 5A Duplex SS
CASING A890 Grade 5A Duplex SS
ST.BOX COVER A890 Grade 5A Duplex SS
IMPELLER A890 Grade 5A Duplex SS - Open (20.7500 in rated, max=24.0157 in, min=18.4252 in)
SHAFT MATERIAL Steel 4340
SHAFT SLEEVE Super Duplex 2507 or higher alloy
LUBRICATION Flood oil
SEAL CHAMBER Taper bore plus with VPE
BEARINGS NUP 317ECP (Inboard) 7318 BEAGY (Outboard)
COUPLING Rexnord - Rexnord ES-80-S.F. 1.00
COUPLING GUARD Steel
BASEPLATE Advantage galvanized steel baseplate with 4 transverse motor adjusters and vertical leveling screws
Sealing Method
MECHANICAL SEAL AES Double Cartridge CDSA (T2) SiC/SiC/A // SiC/C/V - (Cartridge - Double)
Casing connections
Hastelloy C Plugs - Drain; Suction/Discharge Gauge; Bypass
Drain; Suction/Discharge gauge; Bypass
Flanges
Page 1
Proposal No: HOJF06-05-31 01 Item No: 62-P-XX006 Rev.#: 1 MODEL: 3180 XL 20x20-25/5V
150# raised face
Liquid end features
Impeller balanced to ISO 1940 G6.3
Frame features
Labyrinth oil seals - VBXX-D bronze isolator
Piping
CPI Plan 7354 no piping furnished by Goulds
Documentation
Mark center of gravity
Material Certificate of Compliance (Qty 1)
Engineered drawing packages - Non std (up to 10 copies-price per service) (Qty 1)
Testing
Non witnessed NPSH test (requires performance test) (Qty 1)
Non witnessed running performance test (Qty 1)
Non witnessed casing hydrostatic-test
Baseplate Features
Baseplate electrical grounding pads - (2), welded and at opposite ends
Longitudinal motor adjusters
Any SS shims necessary for motor adjustment will be provided by SFO (for field mounted units)
Baseplate drilling for IEC motor (4 bases for IBD mounted motors will not be drilled)
Field Service / Repair
Mounting & alignment of 4 of 14 motors at IBD (Arabian Industries) shop (Qty 1)
Field service supervision - installation & start-up 1 trip 3 days/trip all-inclusive cost by local rep, IBD (Qty 1)
Miscellaneous
Subject to final inspection by customer at factory
316SS nameplate
Preparation for Long term storage
Extended Warrranty Term - 26 months from shipment or 12 months from start-up whichever comes first
Painting
Goulds Blue standard painting
Driver : Electric motor Manufacturer : Westinghouse
FURNISHED BY Pump mfg MOUNTED BY Pump mfg
RATING 315.00 kW (422.4 HP) ENCLOSURE TECO-Westinghouse TEAAC with standard 1.0
service factor
PHASE/FREQ/VOLTS 3/50 Hz/11000 SPEED 1000 RPM
INSULATION/SF F/1.00 FRAME 450SPL
Page 2
Proposal No: HOJF06-05-31 01 Item No: 62-P-XX006 Rev.#: 1 MODEL: 3180 XL 20x20-25/5V
Driver Features
Bearing RTD, 100 ohm platinum, 1 per bearing
Motor nominal noise leve of 85 dbA at 3 feet
Motor freight to Goulds facility (Shipping from Taiwan)
Unwitnessed factory commercial test
Stainless steel nameplate
Copper/copper alloy fabricated rotor construction
Class F insulation system
Swaged rotor bars
Complete vacuum pressure impregnation (VPI) cycle
Motor space heater
Oversized terminal box IP65
Stator RTD, 100 ohm platinum, 2 per phase
Weights
TOTAL NET UNIT WEIGHT 16,531.0 lb
TOTAL GROSS UNIT WEIGHT 3,405.0 lb
Comments
Pump Tag will be: 62-P-XX006 (the XX will be 01 through 07)
Motor Tag will be: 62-P-XX006-M (the XX will be 01 through 07)
TECO Westinghouse motor frame increased to 450SPL, motor redesign for pump speed-torque curve
characteristics.
20 wt% TDS, 0 to 10 wt% TSS, 5 to 20 micron average concentrated brine slurry.
AES CDSA cartridge double mechanical seal with silicon carbide/silicon carbide inboard faces, silicon
carbide/carbon outboard faces, Aflas elastomers inboard, Viton elastomers outboard, Titanium grade 2
alloy normal wetted hardware.
Program Version 1.26.0.1
Our offer does not include specific review and incorporation of any Statutory or Regulatory Requirements and the offer is limited to
the requirements of the design specifications. Should any Statutory or Regulatory requirements need to be reviewed and incorporated
then the Customer is responsible to identify those and provide copies for review and revision of our offer.
Our quotation is offered in accordance with our comments and exceptions identified in our proposal.
Page 3
Model: 3180 Size: 20x20-25 Group: XL 50Hz RPM: 960 Stages: 1
Job/Inq.No. : P-30025 Occidental Mukhaizna Recirc Pump
Purchaser : Aquatech International Corporation
End User : Occidental Mukhaizna LLC - Issued by : Kang Choi
Oman
Item/Equip.No. : 62-P-XX006 Quotation No. : HOJF06-05-31 01 Date : 06/10/2008
Service : Effect 2 Evaporator Recirculation Pump
Order No. : 400000668 Certified By :
Operating Conditions Pump Performance
Liquid: Concentrated Brine Actual Pump Eff.: 86.5 % Suction Specific Speed: 10,609 gpm(US) ft
Temp.: 224.0 deg F Actual Pump Power: 407.7 hp Min. Hydraulic Flow: 9,067.9 gpm
S.G./Visc.: 1.110/1.000 cp Total Power Loss: 0.51 hp Min. Thermal Flow: N/A
Flow: 17,000.0 gpm Rated Total Power: 407.7 hp
TDH: 74.0 ft Imp. Dia. First 1 Stg(s): 20.7500 in
NPSHa: 33.0 ft NPSHr: 29.7 ft Non-Overloading Power: 413.1 hp
Solid size: Shut off Head: 99.2 ft
% Solids: 20.0 Vapor Press:
Max. Solids Size: 2.7559 in
Notes: 1. Power and efficiency Losses are not reflected on the curve below.
2. Elevated temperature effects on performance are not included.
