KPT/KPSE

CONNECTORS

KP-6/898
KPT/KPSE Miniature circular connectors

Contents Introduction
Introduction............................................................. 2 The miniature circular connectors series KPT and
Standard Data........................................................ 3 KPSE from ITT Cannon are manufactured acc. to
Series KPT............................................................. 4 MIL-C-26482 with three point bayonet coupling and
Series KPSE........................................................... 6 five-keyway polarization.They offer general purpose
Contact arrangements............................................ 9 solder connectors and high performance crimp
connectors. The broad product range provides the
Wall mounting receptacles....................................13 most complete familiy of connectors conform to MIL-
Cable connecting plugs...........................................14 C-26482, NFC 93422 HE 301 model, VG 95328 and
Box mounting receptacles......................................15 LN 29500 specifications.
Thru-bulkhead receptacles....................................15
Straight plugs.......................................................16 The versatility of these connectors has been proven
Jam nut receptacles.............................................17 by their usage in general as well as in high per-
Right angle plugs.................................................18 formance environmental applications.

Special versions In addition to the basic series presented in this

Connectors with grounding continuity.................19 catalogue, connectors for special applications are
Receptacles with straight solder pins................. 22 available. They include corrosion resistant types,
filter connectors for electromagnetic compatability
Panel cutouts........................................................ 24 and non-outgasing, radiation resistant versions.
Dummy receptacle.............................................. 25
Protective caps..................................................... 26 All connectors conform to the above mentioned
Tools ..................................................................... 27 specifications are fully intermateable and accept a
Assembly instructions ........................................ 28 wide range of interchangeable accessories. Thereby
Cross reference lists ........................................... 29 design modifications can be achieved more easily
and at lower cost with connectors of the KPT/KPSE
Product safety information................................... 31 series.

2 Subject to changes
KPT/KPSE Miniature circular connectors

Technical Data
KPT KPSE
Material and Finishes

Shell Aluminum alloy, conductive olive drab chromate over cadmium finish per QQ-P-416
Insulator Polychloroprene Polychloroprene
Grommet and Seal Polychloroprene Polychloroprene
Contacts Copper alloy, gold plated Copper alloy, gold plated

Mechanical Data

Shell styles 00 – Wall mounting receptacle 07 – Jam nut receptacle

01 – Cable connecting plug 08 – Plug with 90° termination assemblies
02 – Box mounting receptacle B – Thru-bulkhead receptacle (KPT only)
06 – Straight plug
Shell sizes 8 thru 24
Polarisation/Coupling five keyways/three point bayonet
Service classes A – General duty G – Gland seal for jacketed cable
B – General duty with strain relief J – Gland nut with strain relief for jacketed cable
E – Grommet seal E – Grommet seal P – for potting
F – Grommet seal with strain relief see also pages 5 and 8

Water tightness Acc. to VG 95319 Part 2, Test No. 5.9.2

For styles A to E and J to W, Z1, Z2 and Z3 and gaskets style A and B only
Test pressure 0,2 bar overpressure Test duration 48 h
Test temperature 25 ± 3°C The connector shall be free of moisture
Operating temperature – 55 / 125°C
Durability min. 500 mating cycles
Vibration 200 m/s2 at 10 to 2000 Hz

Electrical Data

Number of contacts 2 thru 61 3 thru 61

Wire size AWG 16 thru 24 12 thru 24
Contact termination Solder Crimp

Contact rating Size AWG Rated current A Test current A Millivolt drop mV
20 7,5 7,5 less than 55
16 22,0 13,0 less than 50
Insulation resistance ⊕ 5000 MW

Service rating Test voltage Service class Vrms VDC With scoop proof connectors
Sea level 1 1500 2100 operating voltages
Exception
2 2300 3200 acc. to MIL-C-26482 and
Service rating between the
21336 m 1 375 535 VG 96912 are
central contact and the housing
(70 000 ft.) 2 550 770 permitted
of the coaxial contact

Operating voltage
Service class VG 95328 MIL-C-26482
1 140 VDC/100 VAC 850 VDC/600 VAC
2 165 VDC/115 VAC 1400 VDC/1000 VAC

Operating voltage and connector usage Connectors are equipment which must not be separated or mated when used as per determination. As acc. to
specification the connectors are suitable for an operating voltage of 50 V (see Product Safety Information).
However, this is only valid when the connectors are free accessible during operation and consequently might
be touchable. When the connectors will be operated with line voltage, ITT Cannon offers a solution, too. Please
consult factory.

3
KPT/KPSE Miniature circular connectors

KPT General purpose solder contact connectors

● General purpose
● Solder termination
● Closed entry socket contacts

Series KPT from ITT Cannon offers general purpose

connectors, qualified for use in military applications
but also widely used in industrial applications calling
for a circular connector with fixed contacts for solder
termination.

The KPT series is MIL-C-26482 approved and is

intermateable with all connectors acc. to the above
mentioned specifications.

4 Subject to changes
KPT/KPSE Miniature circular connectors

KPT General purpose solder contact connectors

How to order*
*
KPT 02 E 22 - 36 P W
Series Prefix
KPT – ITT Cannon Prefix

Shell style
ITT Cannon designation
00 – wall mounting receptacle
01 – cable connecting plug
02 – box mounting receptacle (class E only), not with
contact arrangement 14A4
06 – straight plug
07 – jam nut receptacle (hermetic version also available)
08 – 90° angle plug
B – thru-bulkhead receptacle (class E only)

Class
A – general duty with intermediate endbell
B – general duty with strain relief
(may be used for potting)
E – with a grommet seal, not for 02 and 3112 (MS Spec)
F – grommet seal with strain relief (MS Spec)
G – gland seal for jacketed cable
J – watertight gland seal with strain relief
for jacketed cable
P – for potting (MS Spec)

Shell sizes
8, 10, 12, 14, 16, 18, 20, 22 und 24

Contact arrangement
see page 9 – 11

Contact type
P – pin
S – socket

Alternate insert position

W, X, Y and Z (omit for normal)
see page 12

Modification code
DN – Shrink boot adapter for shell styles 00, 01, 06 and 07
DZ – Endbell for shielding braids and shrink boots.
Class E will always be used for these modifications.

Consult factory for other modifications. Omit first digit (0) of shell style
indication when using a modification code.

*Note:
The above mentioned order reference explanation refers only to the ITT Cannon
ordering system. For other order references according to a specification, please
consult the cross reference list on pages 29 – 30.

5
KPT/KPSE Miniature circular connectors

KPSE High performance crimp contact connectors

● High performance
● Crimp termination
● Closed entry socket contacts

Series KPSE environmental, miniature circular, quick

disconnect connectors are designed for the exacting
requirements of today`s electronic industry.

They are intermateable, intermountable and

interchangeable with all connectors manufactured
acc. to MIL-C-26482, LN 29500, VG 95328, NFC
93422 HE 301 and NFL 54125.

Connectors of ITT Cannon series KPSE have

obtained the VDE Expertise No. 63761.

1 Standard MIL-C-26482 or NFL 54 125 Hardware 4 Contact retaining clip

mates with any connector designed to MIL-C-26 482, is completely encased in a tough plastic wafer to protect
LN 29500 or NF L 54 125 or NF C 93 422, HE 301 the clip from damage.
model
Complete moisture sealing
2 Crimp, snap-in contacts is achieved by combining four seals: shell, peripheral,
are designed to MIL-C-23216 and can be crimped with interfacial and wire seals.
the standard M22520/1 crimp tool.
SHELL SEAL
CLOSED-ENTRY SOCKET CONTACTS is effected when the plug shell pushes against the
eliminate damage from abuse by test probes and help sealing ring in the receptacle when the connectors are
to correct any misaligned pins during engagement. mated.

CONTACT INSERTION PERIPHERAL SEAL

is accomplished from the rear of the connector. When around the edge of the pin insulator is designed so that
the contact is fully inserted, the clip tines snap securely mating the connector puts tension on the seal and
behind the contact shoulder. greatly reduces compression set.

CONTACT EXTRACTION INTERFACIAL SEAL

is accomplished with a front-inserted extraction tool. is achieved by the insulator faces meeting when the
Pressing the tool plunger pushes the contact out plug and receptacle are mated.
through the rear of the connector.
WIRE SEAL
3 Monobloc insulator is accomplished by a multiple ripple design, exceeding
does not leave any access to moisture and avoids the wire sealing requirements of MIL-C-26482.
interfacial empty space.
5 Positive insert-to-shell mechanical retention
with hard plastic wafer firmly locked into a groove in
the shell, in addition to a strong adhesive bond between
the insert and shell.

6 Subject to changes
KPT/KPSE Miniature circular connectors

KPSE High performance crimp contact connectors

How to order acc. to VG 95328

VG 95328 A 18 - 1 S N

Specification

Shell style
A – wall mouting receptacle with straight endbell
B – wall mounting receptacle with cable clamp
C – box mounting receptacle
D – jam nut receptacle
E – jam nut receptacle with cable clamp
J – straight plug with adapter DN
K – straight plug with cable clamp
M – straight plug, version DZ
N – straight plug
R – wall mounting receptacle, version DZ
S – jam nut receptacle with adapter DN
T – jam nut receptacle, version DZ

Shell size
8, 10, 12, 14, 16, 18, 20, 22 und 24

Contact arrangement
see pages 9 – 11

Contact type
P – pin
S – socket

Alternate insert position

see page 12

7
KPT/KPSE Miniature circular connectors

KPSE High performance crimp contact connectors

How to order KPSE 00 E 18 - 32 P X *

Series prefix
KPSE – ITT Cannon prefix
MS – MIL-C-26482 prefix

Shell style
ITT Cannon designation
00 – wall mounting receptacle
01 – cable connecting plug
02 – box mounting receptacle
06 – straight plug
07 – jam nut receptacle
08 – 90° angle plug

Class
A – general duty (not MS approved)
B – general duty with strain relief (not MS approved)
E – grommet seal (MS specification)
F – grommet seal with strain relief (MS specification)
G – gland seal for jacketed cable
J – gland seal with strain relief for jacketed cable
(not MS approved)
P – for potting (MS specification)

Shell style
8, 10, 12, 14, 16, 18, 20, 22 und 24

Contact arrangement
see pages 9 – 11

Contact type
P – pin
S – socket

Alternate insert position

W, X, Y and Z (omit for normal), see page 12

Modification code
DN – Shrink boot adapter for shell styles 00, 01, 06 and 07
DZ – Endbell for shielding braids and shrink boots.
Class E will always be used for these modifications.

Consult factory for other modifications. Omit first digit (0) of shell style
indication when using a modification code.

*Note:
The above mentioned order reference explanation refers only to the ITT Cannon
ordering system. For other order references according to a specification, please
consult the cross reference list on pages 29 – 30.

8 Subject to changes
KPT/KPSE Miniature circular connectors

Contact Arrangements

No. of Contact Service Insulator position Insulator weight (g)

contacts arrangement rating W X Y Z including contacts
Contact size
AWG pin socket

2 8-2 䉱䉭 1 58 122 - -
20

3 8-3 䉱䉭 1 60 210 - -
20

3 8-3A 䉭䊉䉫䉲 1 60 - - -
20

3 8-33 䉱䉫䉭 1 90 - - -
16S

4 8-4 䉱䉭 1 45 - - -
16S

6 10-6 䊉䉭䉫䉲 1 90 - - -
20

3 12-3 䉱䊉䉫䉭䉲 2 - - 180 -

16

10 12-10 䉱䊉䉫䉭䉲 1 60 155 270 295

20

5 14-5 䉱䉭 2 40 92 184 273

16

12 14-12 䉱䉭 1 43 90 - -
20 (8)
16 (4)

Legende
䉱 KPT 䉫 KPSE 䉲 LN29500 䉭 authorized per MIL-C-26482 䊉 authorized per VG95328

9
KPT/KPSE Miniature circular connectors

Contact Arrangements

No. of Contact Service Insulator position Insulator weight (g)

contacts arrangement rating W X Y Z including contacts
Contact size
AWG pin socket

15 14-15 䉱䊉䉫䉭䉲 1 17 110 155 124

20

19 14-19 䉱䊉䉫䉭䉲 1 30 165 315 -

20

5 14-22 䊉 1 - - - -
12 (1)
20 (4)

4 14A4 䉱 1 - - - -
Coax RG188U

8 16-8 䉱䊉䉫䉭 2 54 152 180 331

16

23 16-23 䉱䊉䉫 1 158 270 - -

20 (22)
16 (1)

26 16-26 䉱䊉䉫䉭 1 60 - 275 338

20

11 18-11 䉱䊉䉫䉭䉲 2 62 119 241 340

16

32 18-32 䉱䊉䉫䉭䉲 1 85 138 222 265

20

Legende
䉱 KPT 䉫 KPSE 䉲 LN29500 䉭 authorized per MIL-C-26482 䊉 authorized per VG95328

10 Subject to changes
KPT/KPSE Miniature circular connectors

Contact Arrangements

No. of Contact Service Insulator position Insulator weight (g)

contacts arrangement rating W X Y Z including contacts
Contact size
AWG pin socket

16 20-16 䉱䊉䉫䉭䉲 2 238 318 333 347

16

5 20A6 䉫 2 90 180 270 -

12

24 20-24 䉱 1 70 145 215 290

20

39 20-39 䉱䊉䉫䉭 1 63 114 252 333

20 (37)
16 (2)

41 20-41 䉱䊉䉫䉭䉲 1 45 126 225 -

20

21 22-21 䉱䊉䉫䉭 2 16 135 175 349

16

36 22-36 䉱䊉 1 72 144 216 288

20

41 22-41 䉱䊉䉫䉭䉲 1 39 135 264 -

20 (27)
16 (14) 2

55 22-55 䉱䊉䉫䉭䉲 1 30 142 226 314

20

Legende
䉱 KPT 䉫 KPSE 䉲 LN29500 䉭 authorized per MIL-C-26482 䊉 authorized per VG95328

11
KPT/KPSE Miniature circular connectors

Contact arrangements

No. of Contact Service Insulator position Insulator weight (g)

contacts arrangement rating W X Y Z including contacts
Contact size
AWG pin socket

61 24-61 䉱䊉䉫䉭 1 90 180 270 324

20

Alternate Insert Position

Shell Nbr. of Contact Degree of rotation
size contacts arr. V W X Y Z
The diagram indicates alternate insert positions. The
8 2 8-2 - 58 122 - -
six positions N, V, W, Y, Z differ in degree of rotation 3 8-3 - 60 210 - -
for various sizes and arrangements. For the exact 3 8-3A - 60 - --
degree of rotation, for the list of contact arrange- 3 8-33 - 90 - - -
ments and for alternate positions available, refer to 4 8-4 - 45 - -
the table at the right. 10 6 10-6 - 90 - --
12 3 12-3 - - 180 -
10 12-10 - 60 155 270 295
14 4 14A4 - - - - -
5 14-22 - - - - -
5 14-22 - 40 92 184 273
12 14-5 - 43 90 - -
15 14-15 - 17 110 155 234
19 14-19 - 30 165 315 -
16 8 16-8 - 54 52 180 331
23 16-23 - 158 270 - -
26 16-26 - 60 - 275 338
18 11 18-11 - 62 119 241 340
32 18-32 - 85 138 222 265
20 5 20A6* - 90 180 270 -
16 20-16 - 238 318 333 347
24 20-24 - 70 145 215 290
39 20-39 - 63 114 252 333
41 20-41 - 45 126 225 -
22 21 22-21 - 16 135 175 349
36 22-36 - 72 144 216 288
41 22-41 - 39 135 264 -
55 22-55 - 30 142 226 314
24 61 24-61 - 90 180 270 324

* This contact arrangement features five contacts size 12. Four are standard contacts and one is a first-to-mate contact.

12 Subject to changes
KPT/KPSE Miniature circular connectors

Wall mounting receptacles

KPT00/MS3110 KPSE00/MS3120

Solder Crimp
KPT00/MS3110 KPSE00/MS3120

Without termination assembly

KPT/KPSE KPT
Shell ØA L Q K M R S T Z
size* +0,03 -0,13 max. Thread Type 2A ±0,25 ±0,15 ±0,15 max. ±0,15 max.
◆8 12,00 21,6 7/16-28UNEF 13,5 11,6 15,1 21,0 3,05 12,3
10 15,00 21,6 9/16-24UNEF 13,5 11,6 18,3 24,2 3,05 12,3
12 19,05 21,6 11/16-24UNEF 13,5 11,6 20,6 26,6 3,05 12,3
14 22,23 21,6 13/16-20UNEF 13,5 11,6 23,0 29,0 3,05 12,3
16 25,40 21,6 15/16-20UNEF 13,5 11,6 24,6 31,3 3,05 12,3
18 28,58 21,6 1- 1/16-18UNEF 13,5 11,6 27,0 33,7 3,05 12,3
20 31,75 26,8 1- 3/16-18UNEF 16,5 14,25 29,4 36,9 3,05 10,8
22 34,93 26,8 1- 5/16-18UNEF 16,5 14,25 31,8 40,1 3,05 10,8
24 38,10 26,8 1- 7/16-18UNEF 17,3 15,1 34,9 43,3 3,75 10,0

With termination assemblies

Type A Type B or F Type E Type P Mod. DN or F 185

Typ A Typ B and F

Shell BA DA LA V BBF C DBF GBF HBF LBF
size* max. min. max. Thread Type 2A max. Thread min. min. max. max.
◆8 15,0 8,5 38,0 1/2-28UNEF 14,0 6-32 6,0 2,9 19,3 45,1
10 18,2 11,8 38,0 5/8-24UNEF 17,2 6-32 7,5 4,5 20,8 45,1
12 21,2 15,0 38,0 3/4-20UNEF 20,4 6-32 10,7 7,7 24,4 45,1
14 24,6 17,9 38,0 7/8-20UNEF 23,6 6-32 13,9 9,3 27,2 45,1
16 27,7 21,1 38,0 1 -20UNEF 26,7 6-32 15,5 12,4 28,7 48,2
18 30,9 24,1 38,0 1-3/16-18UNEF 29,5 8-32 19,6 15,6 35,3 48,2
20 33,9 26,5 43,1 1-3/16-18UNEF 32,7 8-32 19,6 15,6 35,3 50,0
22 37,1 30,4 43,1 1-7/16-18UNEF 35,9 8-32 23,6 18,8 39,9 50,0
24 40,3 32,8 43,1 1-7/16-18UNEF 39,0 8-32 25,2 20,1 43,2 50,0

Type E Type P Mod. DN or F 185

Shell BE LE BP DP LP D2 L1 L2
size* max. max. max. min. max. -0,5 max. ±0,5
◆8 14,2 32,5 15,3 8,3 36,9 15,6 35,0 12,2
10 17,2 32,5 17,6 11,3 36,9 18,4 35,0 12,2
12 20,4 32,5 21,6 14,2 36,9 23,7 35,0 12,2
14 23,4 32,5 24,3 17,3 36,9 24,5 35,0 12,2
16 26,6 32,5 27,6 20,5 36,9 29,8 37,0 14,5
18 29,6 32,5 31,0 23,1 36,9 32,0 37,0 14,5
20 32,8 34,5 34,3 26,3 42,2 36,1 42,0 15,8
22 36,0 34,5 37,1 29,4 42,2 38,5 42,0 15,8
24 39,2 34,5 40,5 32,6 43,9 41,6 42,0 14,9

* See page 5, 7 and 8 for ordering number information ◆ in series KPSE only contact arrangements 8-3A and 8-33 available

13
KPT/KPSE Miniature circular connectors

Cable connecting plugs

KPT01/MS3111 KPSE01/MS3121

Solder Crimp
KPT01/MS3111 KPSE01/MS3121

Without termination assembly

KPT/KPSE KPT
Shell ØA K L M Q S ØY Z
size* +0,03 -0,13 ±0,25 max. ±0,15 Thread Type 2A max. max. max.
◆8 12,00 13,5 21,5 11,6 7/16-28UNEF 18,5 21,0 12,3
10 15,00 13,5 21,5 11,6 9/16-24UNEF 23,0 24,2 12,3
12 19,05 13,5 21,5 11,6 11/16-24UNEF 29,0 26,6 12,3
14 22,23 13,5 21,5 11,6 13/16-20UNEF 29,5 29,0 12,3
16 25,40 13,5 21,5 11,6 15/16-20UNEF 32,0 31,3 12,3
18 28,58 13,5 21,5 11,6 1- 1/16-18UNEF 35,0 33,7 12,3
20 31,75 16,5 26,8 14,25 1- 3/16-18UNEF 38,5 36,9 10,8
22 34,93 16,5 26,8 14,25 1- 5/16-18UNEF 42,0 40,1 10,8
24 38,10 17,5 26,8 15,1 1- 7/16-18UNEF 46,0 43,3 10,0

With termination assemblies

Type A Type B or F Type E Type P Mod. DN or F 185

Typ A Type B and F

Shell BA DA LA V BBF C DBF GBF HBF LBF
size* max. min. max. Thread Type 2A max. Thread min. min. max. max.
◆8 15,0 8,5 38,0 1/2-28UNEF 14,0 6-32 6,0 2,9 19,3 46,0
10 18,2 11,8 38,0 5/8-24UNEF 17,2 6-32 7,5 4,5 20,8 46,0
12 21,2 15,0 38,0 3/4-20UNEF 20,4 6-32 10,7 7,7 24,4 46,0
14 24,6 17,9 38,0 7/8-20UNEF 23,6 6-32 13,9 9,3 27,2 46,0
16 27,7 21,1 38,0 1 -20UNEF 26,7 6-32 15,5 12,4 28,7 49,0
18 30,9 24,1 38,0 1-3/16-18UNEF 29,5 8-32 19,6 15,6 35,3 49,0
20 33,9 26,5 43,1 1-3/16-18UNEF 32,7 8-32 19,6 15,6 35,3 51,1
22 37,1 30,4 43,1 1-7/16-18UNEF 35,9 8-32 23,6 18,8 39,9 51,1
24 40,3 32,8 43,1 1-7/16-18UNEF 39,0 8-32 25,2 20,1 43,2 51,1

Type E Type P Mod. DN or F 185

Shell BE LE BP DP LP D2 L1 L2
size* max. max. max. min. max. -0,5 max. ±0,5
◆8 14,2 32,5 15,3 8,3 36,9 15,6 35,0 12,2
10 17,2 32,5 17,6 11,3 36,9 18,4 35,0 12,2
12 20,4 32,5 21,6 14,2 36,9 23,7 35,0 12,2
14 23,4 32,5 24,3 17,3 36,9 24,5 35,0 12,2
16 26,6 32,5 27,6 20,5 36,9 29,8 37,0 14,5
18 29,6 32,5 31,0 23,1 36,9 32,0 37,0 14,5
20 32,8 34,5 34,3 26,3 42,2 36,1 42,0 15,8
22 36,0 34,5 37,1 29,4 42,2 38,5 42,0 15,8
24 39,2 34,5 40,5 32,6 43,9 41,6 42,0 14,9

* See page 5, 7 and 8 for ordering number information ◆in series KPSE only contact arrangements 8-3A and 8-33 available

14 Subject to changes
KPT/KPSE Miniature circular connectors

Box mounting receptacles

KPT02/MS3112 KPSE02/MS3122

Solder Crimp
KPT02/MS3112 KPSE02/MS3122

Without termination assemblies

KPT/KPSE KPT
Shell ØA L N K M R S T Z
size* +0,03 -0,13 max. max. ±0,25 ±0,15 ±0,15 max. ±0,15 max.
◆8 12,00 21,1 11,1 13,5 11,6 15,1 21,0 3,05 12,3
10 15,00 21,1 14,3 13,5 11,6 18,3 24,2 3,05 12,3
12 19,05 21,1 17,5 13,5 11,6 20,6 26,6 3,05 12,3
14 22,23 21,1 20,6 13,5 11,6 23,0 29,0 3,05 12,3
16 25,40 21,1 23,8 13,5 11,6 24,6 31,3 3,05 12,3
18 28,58 21,1 27,0 13,5 11,6 27,0 33,7 3,05 12,3
20 31,75 22,7 30,2 16,5 14,25 29,4 36,9 3,05 10,8
22 34,93 22,7 33,4 16,5 14,25 31,8 40,1 3,05 10,8
24 38,10 22,7 36,5 17,3 15,1 34,9 43,3 3,75 10,0

* See page 5, 7 and 8 for ordering number information ◆in series KPSE only contact arrangements 8-3A and 8-33 available

Thru-bulkhead receptacles
KPTB/MS3119

KPTB/MS3119

Receptacle assembly

Shell ØA K L M T R S X
size* +0,03 -0,13 ±0,5 max. ±0,25 max. ±0,15 max. ±0,15
◆8 12,00 16,1 28,6 14,5 6,0 15,1 21,0 3,05
10 15,00 16,1 28,6 14,5 6,0 18,3 24,2 3,05
12 19,05 16,1 28,6 14,5 6,0 20,6 26,6 3,05
14 22,23 16,1 28,6 14,5 6,0 23,0 29,0 3,05
16 25,40 16,1 28,6 14,5 6,0 24,6 31,3 3,05
18 28,58 16,1 28,6 14,5 6,0 27,0 33,7 3,05
20 31,75 20,1 31,9 17,7 9,2 29,4 36,9 3,05
22 34,93 20,1 31,9 17,7 9,2 31,8 40,1 3,05
24 38,10 20,1 31,9 17,7 8,0 34,9 43,3 3,75

* See page 5, 7 and 8 for ordering number information ◆in series KPSE only contact arrangements 8-3A and 8-33 available

15
KPT/KPSE Miniature circular connectors

Straight plugs
KPT06/MS3116 KPSE06/MS3126

Solder Crimp
KPT06/MS3116 KPSE06/MS3126

Without termination assemblies

KPT/KPSE KPT
Shell G JL Q Thread Z
size* max. ±0,15 max. Thread Type 2A max.
◆8 19,8 9,1 21,4 7/16-28UNEF 16,3
10 23,6 9,1 21,4 9/16-24UNEF 16,3
12 26,5 9,1 21,4 11/16-24UNEF 16,3
14 30,1 9,1 21,4 13/16-20UNEF 16,3
16 33,2 9,1 21,4 15/16-20UNEF 16,3
18 35,4 9,1 21,4 1- 1/16-18UNEF 16,3
20 39,0 10,7 25,1 1- 3/16-18UNEF 15,0
22 42,1 10,7 25,1 1- 5/16-18UNEF 15,0
24 45,2 10,7 25,1 1- 7/16-18UNEF 15,0

With termination assemblies

Type A Type B or F Type E Type P Mod. DN or F 185

Type A Typ B and F

Shell BA DA LA V BBF C DBF GBF HBF LBF
size* max. min. max. Thread Type 2A max. Thread min. min. max. max.
◆8 15,0 8,5 42,0 1/2-28UNEF 14,0 6-32 6,0 2,9 19,3 46,0
10 18,2 11,8 42,0 5/8-24UNEF 17,2 6-32 7,5 4,5 20,8 46,0
12 21,2 15,0 42,0 3/4-20UNEF 20,4 6-32 10,7 7,7 24,4 46,0
14 24,6 17,9 42,0 7/8-20UNEF 23,6 6-32 13,9 9,3 27,2 46,0
16 27,7 21,1 42,0 1 -20UNEF 26,7 6-32 15,5 12,4 28,7 49,0
18 30,9 24,1 42,0 1-3/16-18UNEF 29,5 8-32 19,6 15,6 35,3 49,0
20 33,9 26,5 45,0 1-3/16-18UNEF 32,7 8-32 19,6 15,6 35,3 49,0
22 37,1 30,4 45,0 1-7/16-18UNEF 35,9 8-32 23,6 18,8 39,9 49,0
24 40,3 32,8 45,0 1-7/16-18UNEF 39,0 8-32 25,2 20,1 43,2 49,0

Type E Type P Mod. DN or F 185

Shell BE LE BP DP LP D2 L1 L2
size* max. max. max. min. max. -0,5 max. ±0,5
◆8 14,2 32,5 15,3 8,3 36,9 15,6 35,0 12,2
10 17,2 32,5 17,6 11,3 36,9 18,4 35,0 12,2
12 20,4 32,5 21,6 14,2 36,9 23,7 35,0 12,2
14 23,4 32,5 24,3 17,3 36,9 24,5 35,0 12,2
16 26,6 32,5 27,6 20,5 36,9 29,8 37,0 14,5
18 29,6 32,5 31,0 23,1 36,9 32,0 37,0 14,5
20 32,8 34,5 34,3 26,3 42,2 36,1 42,0 15,8
22 36,0 34,5 37,1 29,4 42,2 38,5 42,0 15,8
24 39,2 34,5 40,5 32,6 43,9 41,6 42,0 14,9

* See page 5, 7 and 8 for ordering number information ◆in series KPSE only contact arrangements 8-3A and 8-33 available

16 Subject to changes
KPT/KPSE Miniature circular connectors

Jam nut receptacle

KPT07/MS3114 KPSE07/MS3124

Solder Crimp
KPT07/MS3114 Type A KPSE07/MS3124

Without termination assemblies

KPT/KPSE KPT
Shell A F H K M R S T Panel thickness ØY Z
size* +0,03 -0,13 ±0,15 ±0,15 ±0,25 ±0,15 Thread Type 2A ±0,5 min. max. max. max.
◆8 12,0 13,3 19,0 3,2 17,7 9/16-24UNEF 24,0 1,6 3,5 28,0 7,9
10 15,0 16,5 22,2 3,2 17,7 11/16-24UNEF 27,0 1,6 3,5 31,0 7,9
12 19,05 20,6 27,0 3,2 17,7 7/8-20UNEF 32,0 1,6 3,5 36,0 7,9
14 22,23 23,8 30,2 3,2 17,7 1 -20UNEF 35,0 1,6 3,5 39,0 7,9
16 25,40 26,9 33,3 3,2 17,7 1- 1/8-18UNEF 38,5 1,6 3,5 42,0 7,9
18 28,58 30,1 36,5 3,2 17,7 1- 1/4-18UNEF 41,5 1,6 3,5 45,0 7,9
20 31,75 33,3 39,7 4,0 22,5 1- 3/8-18UNEF 46,0 1,6 6,5 50,0 4,7
22 34,93 36,5 42,9 4,0 22,5 1- 1/2-18UNEF 49,5 1,6 6,5 55,0 4,7
24 38,10 39,6 46,0 4,0 23,3 1- 5/8-18UNEF 52,5 1,6 6,5 57,0 3,8

* See page 5, 7 and 8 for ordering number information ◆in series KPSE only contact arrangements 8-3A and 8-33 available

With termination assemblies

Type B or F Type E Modification

DN or F 185

Type B and F Type E Type DN

Shell BBF DBF GBF HBF LBF BE LE L1 L2 D2
size* max. min. min. max. max. max. max. max. ±0,5 max.
◆8 18,2 6,0 2,9 19,3 44,9 18,2 33,5 43,0 12,2 15,6
10 21,5 7,5 4,5 20,8 44,9 21,5 33,5 43,0 12,2 18,4
12 24,6 10,7 7,7 24,2 44,9 24,6 33,5 43,0 12,2 23,7
14 27,8 13,9 9,3 27,2 44,9 27,8 33,5 43,0 12,2 24,7
16 31,0 15,5 12,4 28,7 48,4 31,0 33,5 45,5 14,5 29,8
18 34,1 19,6 15,6 35,3 48,4 34,1 33,5 45,5 14,5 32,0
20 38,1 19,6 15,6 35,3 50,3 38,1 39,0 52,6 15,8 36,1
22 41,3 23,6 18,8 39,8 50,3 41,3 39,0 52,6 15,8 28,5
24 44,5 25,2 20,1 43,2 50,3 44,5 39,0 51,6 14,9 41,6

* See page 5, 7 and 8 for ordering number information ◆in series KPSE only contact arrangements 8-3A and 8-33 available

17
KPT/KPSE Miniature circular connectors

Right angle plug, 90°

KPT08 KPSE08

Solder Crimp
KPT08 KPSE08

Without termination assemblies

KPT/KPSE KPT
Shell G J L Q Z
size* max. ±0,15 max. Thread Type 2A max.
◆8 19,8 9,1 21,4 7/16-28UNEF 16,3
10 23,6 9,1 21,4 9/16-24UNEF 16,3
12 26,5 9,1 21,4 11/16-24UNEF 16,3
14 30,1 9,1 21,4 13/16-20UNEF 16,3
16 33,2 9,1 21,4 15/16-20UNEF 16,3
18 35,4 9,1 21,4 1- 1/16-18UNEF 16,3
20 39,0 10,7 25,1 1- 3/16-18UNEF 15,0
22 42,1 10,7 25,1 1- 5/16-18UNEF 15,0
24 45,2 10,7 25,1 1- 7/16-18UNEF 15,0
* See page 5, 7 and 8 for ordering number information ◆in series KPSE only contact arrangements 8-3A and 8-33 available

With termination assemblies

Typ A or E Type B or F

Typ A and E Type B and F

Shell BAE LAE DAE V BBF DBF LBF
size* max. max. max. Thread Type 2A max. max. max.
◆8 15,6 36,1 20,9 1/2-28UNEF 15,6 31,4 36,1
10 18,9 38,3 21,7 5/8-24UNEF 18,9 32,2 38,3
12 21,2 40,9 23,3 3/4-20UNEF 21,2 35,4 40,9
14 24,8 41,6 24,9 7/8-20UNEF 24,8 38,6 41,6
16 27,7 42,5 26,5 1 -20UNEF 27,7 40,2 42,5
18 31,4 44,7 28,1 1-3/16-18UNEF 31,4 41,8 44,7
20 34,7 48,3 29,6 1-3/16-18UNEF 34,7 43,4 48,3
22 36,9 52,1 31,7 1-7/16-18UNEF 36,9 47,9 52,1
24 41,1 52,1 33,6 1-7/16-18UNEF 41,1 49,9 52,1

* See page 5, 7 and 8 for ordering number information ◆in series KPSE only contact arrangements 8-3A and 8-33 available

18 Subject to changes
KPT/KPSE Miniature circular connectors

Special versions with grounding continuity

These connectors are designed to ensure electrical

continuity

● at the cable shielding level

(to protect it against radio frequency
intererences)

● at the grounding level

(if it is connected to the shielding).

The plugs are manufactured with grounding fingers

soldered to the front face of the shell. They make
contact with the inner side of the receptacle shell.

Plug and receptacle feature a special endbell which

supports the cable shielding. The connectors are in
accordance with the VG 95328 specification.

Receptacle with grounding continuity (for shielded cable)

KPT/KPSE 0E ... DZ

Shell A B C D E K L M R S ØT
size* +0,03 -0,13 min. +0,5 max. 1,00 ±0,25 max. ±0,15 ±0,15 max. ±0,15
◆8 12,00 6,6 16,0 13,3 15,0 13,5 52,0 11,6 15,1 21,0 3,05
10 15,00 9,2 18,0 16,1 15,0 13,5 52,0 11,6 18,3 24,2 3,05
12 19,05 12,2 22,0 20,0 17,0 13,5 52,0 11,6 20,6 26,6 3,05
14 22,23 15,2 25,0 22,2 18,0 13,5 53,0 11,6 23,0 29,0 3,05
16 25,40 18,3 28,0 26,2 18,0 13,5 53,0 11,6 24,6 31,3 3,05
18 28,58 20,0 32,0 28,5 18,0 13,5 53,0 11,6 27,0 33,7 3,05
20 31,75 23,0 34,0 32,5 18,0 16,5 58,0 14,25 29,4 36,9 3,05
22 34,93 26,0 38,0 34,8 18,0 16,5 58,0 14,25 31,7 40,1 3,05
24 38,10 28,8 41,0 37,9 18,0 17,3 58,0 15,1 34,9 43,3 3,75

* See pages 5 and 8 for ordering number information ◆in series KPSE only contact arrangements 8-3A and 8-33 available

19
KPT/KPSE Miniature circular connectors

Cable connecting plug with grounding continuity (for shielding cable)

KPT/KPSE 1E ... DZ

Shell A B C D E K L M S ØY
size* +0,03 -0,13 min. +0,50 max. ±1,0 ±0,25 max. ±0,15 max. max.
◆8 12,00 6,6 16,0 13,3 15,0 13,5 52,0 11,6 18,5 21,0
10 15,00 9,2 18,0 16,1 15,0 13,5 52,0 11,6 23,0 24,2
12 19,05 12,2 22,0 20,0 17,0 13,5 52,0 11,6 29,0 26,6
14 22,23 15,2 25,0 22,2 18,0 13,5 53,0 11,6 29,5 29,0
16 25,40 18,3 28,0 26,2 18,0 13,5 53,0 11,6 32,0 31,3
18 28,58 20,0 32,0 28,5 18,0 13,5 53,0 11,6 35,0 33,7
20 31,75 23,0 34,0 32,5 18,0 16,5 58,0 14,25 38,5 36,9
22 34,93 26,0 38,0 34,8 18,0 16,5 58,0 14,25 42,0 40,1
24 38,10 28,8 41,0 37,9 18,0 17,5 58,0 15,10 46,0 43,3

* See pages 5 and 8 for ordering number information ◆in series KPSE only contact arrangements 8-3A and 8-33 available

Straight plug with grounding continuity

KPT/KPSE6E.DZ

Shell A B C D E L S
size* min. +0,50 max. max. ±1,0 max. ±0,2
◆8 6,6 16,0 19,1 20,0 15,0 48,0 17,0
10 9,2 18,0 22,0 15,0 15,0 48,0 19,0
12 12,2 22,0 26,2 26,0 17,0 48,0 23,0
14 15,2 25,0 29,4 30,0 18,0 49,0 26,0
16 18,3 28,0 32,8 33,0 18,0 49,0 29,0
18 20,0 32,0 35,4 36,0 18,0 49,0 33,0
20 23,0 34,0 39,0 40,0 18,0 53,0 35,0
22 26,0 38,0 42,1 43,0 18,0 53,0 39,0
24 28,8 41,0 45,2 46,0 18,0 53,0 42,0

* See pages 5 and 8 for ordering number information ◆in series KPSE only contact arrangements 8-3A and 8-33 available

20 Subject to changes
KPT/KPSE Miniature circular connectors

Jam nut receptacle with grounding continuity (for shielded cable)

KPT/KPSE 7E ... DZ

Shell- ØA ØB ØC D E L S T
size min. +0,5 max. max. 1,0 max. ±0,25 ±0,25
◆8 6,6 16,0 18,2 13,3 15,0 47,0 23,0 19,0
10 9,2 18,0 21,4 16,1 15,0 47,0 27,0 22,2
12 12,2 22,0 24,6 20,0 17,0 49,0 31,7 27,0
14 15,2 25,0 27,8 22,2 18,0 50,0 34,9 30,2
16 18,3 28,0 30,9 26,2 18,0 50,0 38,1 33,3
18 20,0 32,0 34,1 28,5 18,0 50,0 41,3 36,5
20 23,0 34,0 38,1 32,5 18,0 55,0 46,0 39,7
22 26,0 38,0 41,3 34,8 18,0 55,0 49,2 42,9
24 28,8 41,0 44,4 37,9 18,0 55,0 52,3 46,0

* See pages 5 and 8 for ordering number information ◆in series KPSE only contact arrangements 8-3A and 8-33 available

Assembly of a connector with a ground continuity endbell

KPT/KPSE ... DZ

Shell ±A ±B
size* max. max.
◆8 6,6 8,0
10 9,2 10,0
12 12,2 14,0
14 152 17,0
16 18,3 20,0
18 20,0 24,0
20 23,0 27,0
22 26,0 30,0
24 28,8 33,0

* See pages 5 and 8 for ordering number information ◆in series KPSE only contact arrangements 8-3A and 8-33 available

21
KPT/KPSE Miniature circular connectors

Receptacles with straight solder pins

How to order

KPT 2 E 22 - 36 P W *

Series
KPT – ITT Cannon designation

Shell type
ITT Cannon designation
2 – box mounting receptacle (only class E),
not layout 14 A 4
7 – jam nut receptacle
(hermetic version also available)

Class
A – general duty (shell type 7 only)
E – with grommet seal, not for 02 and
3112 (MS-Spezification), only shell type 2

Shell size
8, 10, 12, 14, 16, 18, 20, 22 und 24

Contact arrangements
see page 9 – 11

Contact type
P – pin
S – socket

Alternate insert position

W, X, Y and Z (omit for normal position)
see page 12

Modification
EW – solder pin 0,6 x 7 mm
EX – solder pin 0,76 x 7 mm

22 Subject to changes
KPT/KPSE Miniature circular connectors

Box mounting receptacle

KPT 2* P/S** .***

Shell A K L M N R S ØT
size +0,03 -0,13 ±0,25 max. ±0,15 max. ±0,15 max. ±0,15
8 12,00 13,50 21,1 11,60 11,10 15,10 21,00 3,05
10 15,00 13,50 21,1 11,60 14,30 18,30 24,20 3,05
12 19,05 13,50 21,1 11,60 17,50 20,60 26,60 3,05
14 22,23 13,50 21,1 11,60 20,60 23,00 29,00 3,05
16 25,40 13,50 21,1 11,60 23,80 24,60 31,30 3,05
18 28,58 13,50 21,1 11,60 27,00 27,00 33,70 3,05
20 31,75 16,50 22,7 14,25 30,20 29,40 36,90 3,05
22 34,93 16,50 22,7 14,25 33,40 31,70 40,10 3,05
24 38,10 17,30 22,7 15,10 36,50 34,90 43,30 3,75

Order ref. see page 22

Jam nut receptacle

KPT 7* P/S** .***

Shell A F H K M R S Panel thickness Y

size* +0,03 -0,13 ±0,15 ±0,15 ±0,25 ±0,15 Thread Type 2 A ±0,5 min. max.
8 12,00 13,3 19,0 3,2 17,7 9/16-24UNEF 24,0 1,6 28,0
10 15,00 16,5 22,2 3,2 17,7 11/16-24UNEF 27,0 1,6 31,0
12 19,05 20,6 27,0 3,2 17,7 7/8-20UNEF 32,0 1,6 36,0
14 22,23 23,8 30,2 3,2 17,7 1- 20UNEF 35,0 1,6 39,0
16 25,40 26,9 33,3 3,2 17,7 1- 1/8-18UNEF 38,5 1,6 42,0
18 28,58 30,1 36,5 3,2 17,7 1- 1/4-18UNEF 41,5 1,6 45,0
20 31,75 33,3 39,7 4,0 22,5 1- 3/8-18UNEF 46,0 1,6 50,0
22 34,93 36,5 42,9 4,0 22,5 1- 1/2-18UNEF 49,5 1,6 55,0
24 38,10 39,6 46,0 4,0 23,3 1- 5/8-18UNEF 52,5 1,6 57,0

Order ref. see page 22

23
KPT/KPSE Miniature circular connectors

Panel cutouts Box and wall mounting receptacle

Shell size for rear mounting for front mounting

D +0,25 / -0 D +0,25 / -0 R ±0,15
8 14 12,7 15,1
10 17 16 18,3
12 22 19 20,6
14 25 22,2 23,0
16 28 25,5 24,6
18 31 28,5 27,0
20 34,5 31,7 29,4
22 37,5 35 31,8
24 41 38 34,9

Mounting hole diameter

Shell size KPT/KPSE P - Panel thickness

T +0,3 screw head height included
8 3,1 2,2
10 3,1 2,2
12 3,1 2,2
14 3,1 2,2
16 3,1 2,2
18 3,1 2,2
20 3,1 5,4
22 3,1 5,4
24 3,6 5,4

front mounting rear mounting

Jam nut receptacle

Shell KPT/KPSE
size A +0,25 B +0
-0 -0,12
8 14,5 13,6
10 17,7 16,8
12 22,7 20,9
14 25,7 24,1
16 28,8 27,2
18 32 30,4
20 35,1 33,6
22 38,4 36,8
24 41,5 40

24 Subject to changes
KPT/KPSE Miniature circular connectors

Dummy receptacles How to order

KPT 15 - 8 A
MS 3115 - 10 A

Series

Dummy receptacle

Shell size

Flange
A-Standard

Shell size A K M R S ØT
+0,03 -0,13 ±0,4 ±0,15 ±0,15 max. ±0,15
*8A 12,00 1,6 12,1 15,1 21,0 3,05
* 10 A 15,00 1,6 12,1 18,3 24,2 3,05
* 12 A 19,05 1,6 12,1 20,6 26,6 3,05
* 14 A 22,23 1,6 12,1 23,0 29,0 3,05
* 16 A 25,40 1,6 12,1 24,6 31,3 3,05
* 18 A 28,58 1,6 12,1 27,0 33,7 3,05
* 20 A 31,75 2,4 14,5 29,4 36,9 3,05
* 22 A 34,93 2,4 14,5 31,8 40,1 3,05
* 24 A 38,10 2,4 15,4 34,9 43,3 3,75

* Add KPT 15 or MS 3115 prefixes

25
KPT/KPSE Miniature circular connectors

Protective caps 80 / 3180 – for plugs

cap with nylon cord D / preferred type
Material and finishes
Protective cap Aluminum alloy
Sash chain Stainless steel
Cord Polyamide
Ring Stainless steel
Clip Aluminum alloy
Gasket Fluor Silicone
Endlink / rivet Stainless steel, passivated
Bayonet pin Stainless steel, passivated
Finishes
A34 Nickel
A66 Olive drab chromate over cadmium

How to order
KPT80 - 10 D - A34
MS3180 - 10

Series
KPT80 – for plug 81 / 3181 – for receptacles
KPT81 – for receptacle cap with nylon cord D / preferred type
Shell size
8 – 24

Termination
D – Preferred type: with nylon cord and end link
clip and end link attached
C – sash chain
N – sash chain with ring (81 or 3181 only)

Modification
A34 – nickel plated
without code = A66 – oliv drab chromate over cadmium

VG95328 - Z2 C 10

VG Specification Shell A L1 B L2 H N
size max max. max. max.
Style 8 18,26 19,84 18,0 21,44 76 14,7
Z1 – for receptacle 10 21,44 19,84 20,3 21,44 76 17,9
Z2 – for plug 12 25,40 19,84 25,1 21,44 89 22,6
14 28,58 19,84 28,2 21,44 89 25,8
Termination 16 31,75 19,84 31.5 21,44 89 29,0
C – with nylon cord and end link 18 34,92 19,84 34,5 21,44 89 32,2
clip and end link attached 20 38,10 21,44 37,8 21,44 101 35,3
22 41,28 21,44 40,9 21,44 101 38,5
Shell size 24 44,45 22,22 44,2 22,22 101 41,7
8 – 24

Crimp tool for clips upon request

80 / 3180 – for plugs 81 / 3181 – for receptacles

cap with sash chain C or N cap with sash chain C or N

26 Subject to changes
KPT/KPSE Miniature circular connectors

Tools and Accessories

Crimp tools Series Hand crimp tool Locator for contact Test gage for
sizes 20, 16 and 12 Hand crimp tool
KPSE M22520/1-01 M22520/1-02 M22520/3-1

Insertion/Extraction tool KPSE

Contact size Insertion tool Extraction tool
MS ITT Cannon MS/ITT Cannon LN
20 without insulation support - CIT-20-18 MS24256R20 W0,6LN29500
20 with insulation support MS24256A20 CIT-20-5A MS24256R20 W0,6LN29500
16 MS24256A16 CIT-16-1 MS24256R16 W1,2LN29500
12 MS24256A12 MS24256R12

KPT14A4
Contact type Insertion tool Extraction tool
Coaxial - CET-C 6 B

Contacts KPSE/VG 95328

Contact size Contact type Contact order ref.
KPSE version VG 95328 version
20 Socket with 031-8704-203 031-8704-203
insulation support
Pin with 430-8560-006 430-8560-006
insulation support
16 Socket 031-8704-000 031-8704-000
Pin 430-8560-004 430-8560-004
12 Socket 031-8704-012
Pin 430-8560-016
Grounding pin 430-8560-020

KPT14A4
Coaxial PIn DM 53740-5001
Socket DM 53742-5001

Wire hole fillers/Grommet sealing plugs KPSE

Contact size Colour code MS LN ITT Cannon
20 Red MS3187A20 BL0,6LN 29500 225-1012-000
16 Blue MS3187-16A BL1,2LN 29500 225-1011-000
12 Yellow MS3187-12 225-0072-000
Koax 14A4 Yellow 225-0018-000

Flange gaskets KPSE

Shell Alu-Flex Chloroprene Shell Alu-Flex Chloroprene
size conductive non conductive size conductive non conductive
8 075-8543-000 075-8543-010 18 075-8543-005 075-8543-015
10 075-8543-001 075-8543-011 20 075-8543-006 075-8543-016
12 075-8543-002 075-8543-012 22 075-8543-007 075-8543-017
14 075-8543-003 075-8543-013 24 075-8543-008 075-8543-018
16 075-8543-004 075-8543-014

27
KPT/KPSE Assembly
Miniature circularInstructions
connectors

Contact Cable size Strip

size mm2 (AWG) insulation
20 0,93-0,21 (20-24) 5,0 mm
16 1,91-0,60 (16-20) 6,5 mm
12 3,18-1,91 (12-14) 6,5 mm
14A4 Coax RG179B/u

Crimping contacts 2. Insert stripped wire into contact crimp pot. Wire must 3. Using correct crimp tool and locator, cycle the tool
1. Strip wires according to the table above taking care be visible thru inspection hole. once to be sure the indentors are open. Insert contact
not to cut or nick strands. and wire into locator. Squeeze tool handles firmly and
completely to insure a proper crimp. The tool will not
release unless the crimp indentors in the tool head
have been fully actuated.

4. Release crimped contact and wire from tool. Be Contact insertion 6. Use the proper contact insertion tool, and slide the
certain the wire is visible thru inspection hole in contact. 5. Remove hardware from plug and receptacle. Slide tool over the terminal end of the contact. The size 16
hardware over wire bundle in proper order for re- contact lies in the tool and the tool tip butts against the
assembly. contact shoulder. The rear, or insulation support, of the
size 20 contact butts against an internal shoulder in
the tool tip.

7. Beginning from center cavity and working outwards, 8. Use wire hole fillers or grommet sealing plugs to fill Completion
insert wired contacts into rear of connector by hand any empty cavities and assemble hardware to rear of 9. Check face of plug or receptacle for proper contact
until the front of the contact shoulder is no more than plug or receptacle. installation.
1/8" from the grommet. Holding the connector securely,
position tool behind contact. Push tool straight into
contact cavity until contact snaps into position. A light
pull on wire will assure that contact is locked securely.
Repeat for remaining contacts.

pin contacts while the second index line is for removing

socket contacts. Carefully place the tool tip over the
contact to be extracted until the tool tip touches the
insulator face. Carefully rotate the tool until the index
line is slightly below the insulator face. Keep an even
pressure against tool body; push plunger forward with
Contact extraction thumb and index finger; and push the contact out
10. Slide hardware back over wire bundle. Using pro- 11. Use the proper extraction tool. There are two lines through the clip. Carefully remove extraction tool from
per extraction tool or extraction end of proper insertion/ on the clip sleeve which are vital to the contact rem- connector. Pull the wire by hand to complete the rem-
extraction tool, proceed as follows: oval process. The first index line is used for removing oval of the contact.

Please ask for our detailed

Assembly Instruction

28 Subject to changes
KPT/KPSE Miniature circular connectors

Cross Reference List KPT/MIL-C-26482, NFL 54125, VG 95328

Part No. KPT Part No. Part No. Part No. Part No.
ITT Cannon MIL-26482 NFL 54125 VG 95328 LN 29500
KPT00B*-*** 25100A*-***50
KPT00B*-*** 25100AC*-***50
KPT00E*-*** MS3110E*-*** 25100E*-***50
KPT00F*-*** MS3110E*-*** 25100EC*-***50
KPT00G*-*** 25100J*-***50
KPT00J*-*** MS3110J*-***
KPT00P*-*** MS3110P*-*** 25100P*-***50
KPT0E*-***DN
KPT0E*-***DZ
KPT01A*-*** 25101A*-***50
KPT01B*-*** 25101AC*-***50
KPT01E*-*** MS3111E*-*** 25101E*-***50
KPT01F*-*** MS3111F*-*** 25101EC*-***50
KPT01G*-*** 25101J*-***50
KPT01J*-*** MS3111J*-***
KPT01P*-*** MS3111P*-*** 25101P*-***50
KPT1E*-***DN
KPT06A*-*** 25106A*-***50
KPT06B*-*** 25106AC*-***50
KPT06E*-*** MS3116E*-*** 25106E*-***50
KPT06F*-*** MS3116F*-*** 25106EC*-***50
KPT06G*-*** 25106J*-***50
KPT1E*-***DZ
25102E*-***50Y11*
25107A*-***50Y11*
KPT06J*-*** MS3116J*-***
KPT06P*-*** MS3116P*-*** 25106P*-***50
KPT6A*-***88
KPT6E*-***DN
KPT6E*-***DZ
KPT02E*-*** MS3112E*-*** 25102E*-***50 H*-***VG 95328
KPT07A*-*** 25107A*-***50
KPT07E*-*** MS3114E*-*** 25107E*-***50
KPT07F*-*** MS3114F*-*** 25107EC*-***50
KPT08E*-***
KPT08F*-*** 25108EC*-***50
KPT08P*-*** 25108P*-***50
KPT7E*-***DN
KPTB*-*** MS3119E*-*** 251B*-***

Please note: Connectors acc. to VG 95328 and connectors of ITT Cannon series KPSE use different contacts – see page 27

Cross Reference List Protective Caps

Part No. Part No. Part No. Part No. Part No.
ITT Cannon MIL-C-26482 NFL 54125 VG95328 LN 29500
KPT80 MS 3180
KPT80...C MS 3180...C Z 2...VG 95328
KPT81 MS 3181
KPT81...C MS 3181...C Z 1...VG 95328
KPT81...N MS 3181...N

29
KPT/KPSE Miniature circular connectors

Cross Reference List KPSE/MIL-C-26482, NFL 54125, VG95328

Part No. KPSE Part No. Part No. Part No.
ITT Cannon MIL-C-26482 NFL 54-125 VG 95328
KPSE00A*-*** 25100RA*-***50
KPSE00B*-***
KPSE00E*-*** MS3120E*-*** 25100R*-***50 A*-***VG 95328
KPSE00F*-*** MS3120F*-*** 25100RC*-***50 B*-***VG 95328
KPSE0E*-***DZ R*-***VG 95328
KPSE00J*-***
KPSE00P*-*** MS3120P*-*** 25100RP*-***50
KPSE0E*-***DN
KPSE00G*-*** 25106RJ*-***50
KSPE01A*-*** 25101RA*-***50
KPSE01B*-***
KPSE01E*-*** MS3121E*-*** 25101R*-***50
KPSE01F*-*** MS3121F*-*** 25101RC*-***50
KPSE01G*-*** 25101RJ*-***50
KPSE01J*-***
KPSE01P*-*** MS3121P*-*** 25101RP*-***50
KPSE*-***DN
KPSE02E*-*** MS3122E*-*** 25102R*-***50 C*-***VG 95328
KPSE06A*-*** 25106RA*-***50
KPSE06B*-***
KPSE06E*-*** MS3126E*-*** 25106R*-***
KPSE06F*-*** MS3126F*-*** 25106RC*-***50 K*-***VG 95328
KPSE06G*-*** 25106RJ*-***50
KPSE06J*-***
KPSE06P*-*** MS3126P*-*** 25106RP*-***50
KPSE6A*-***88
KPSE6E*-***88 N*-***VG 95328
KPSE6E*-***DN J*-***VG 9532
KPSE6E*-***DZ M*-***VG 95328
KPSE07A*-*** 25107RA*-***50
KPSE1E*-***DZ
KPSE7E*-***DN S*-***VG 95328
KPSE07E*-*** MS3124E*-*** 25107R*-***50 D*-***VG 95328
KPSE07F*-*** MS3124F*-*** 25107RC*-***50 E*-***VG 95328
KPSE08E*-***
KPSE08F*-*** 25108RC*-***50
KPSE08P*-*** 25108RP*-***50
KPSE7E*-***DZ T*-***VG 95328

Please note: Connectors acc. to VG 95328 and connectors of ITT Cannon series KPSE use different contacts – see page 27

30 Subject to changes
KPT/KPSE Miniature circular connectors

Product Safety Information

THIS NOTE SHOULD BE READ IN CON-JUNCTION Electrical connectors may be damaged in transit to Always use the correct application tools as specified
WITH THE PRODUCT DATA SHEET/CATALOGUE. the customers, and damage may result in creation in the Data Sheet/Catalogue.
FAILURE TO OB-SERVE THE ADVICE IN THIS INFOR- of hazards. Products should therefore be examined
MATION SHEET AND THE OPERATING CONDITIONS prior to installation/use and rejected if found to be Do not permit untrained personnel to wire, assemble
SPECIFIED IN THE PRODUCT DATA SHEET/ damaged. or tramper with connectors.
CATALOGUE COULD RESULT IN HAZAR-DUOUS
SITUATIONS. 4. DISPOSAL For operation voltage please see appropriate national
Incineration of certain materials may release regulations
1. MATERIAL CONTENT AND PHYSICAL noxious or even oxid fumes.
FORM IMPORTANT GENERAL INFORMATION.
Electrical connectors do not usually contain 5. APPLICATION 1. Air and creepage paths/Operating voltage
hazardous materials. They contain conducting and Connectors with exposed contacts should not be The admissible operating voltages depend on the
non-conducting materials and can be divided into selected for use on the current supply side of an individual applications and the valid national and
two groups. electrical circuit, because an electric shock could other applicable safety regulations.
result from touching exposed contacts on an
a) Printed circuit types and low cost audio types unmated connector. Voltages in excess of 30 V ac For this reason the air and creepage path date
which employ all plastic insulators and casings. or 42.5 V dc are potentially hazardous and care are only reference values. Observe reduction of air
should be taken to ensure that such voltages can and creepage paths due to PC board and/or harnes-
b) Rugged, Fire Barrier and High Reliability types not be transmitted in any way to exposed metal parts sing.
with metal casings and either natural rubber, of the connector body. The connector and wiring
synthetic rubber, plastic or glass insulating should be checked, before making live, to have no 2. Temperature
materials. damage to metal parts of insulators, no solder blobs, All information given are temperature limits. The
loose strands, conducting lubricants, swarf, or any operation temperature depends on the individual
Contact materials vary with type of connector and other undersired conducting particles. Insulation application.
also application and are usually manufactured from resistance should be checked to make certain that
either copper, alloys, nickel, alumel, chromel or no low resistance joints or spurious conducting path 3. Other important information
steel. In special applications, other alloys may be are existing between contacts and exposed metal Cannon continuously endeavours to improve their
specified. parts of the connector body. Further the contact products. Therefore, Cannon products may deviate
resistance of the connectors should be measured from the description, technical data and shape as
2. FIRE CHARACTERISTICS AND ELECTRIC within the electrical circuit in order to identify high shown in this catalogue and data sheets.
SHOCK HAZARD resistances which result in excessive connector
There is no fire hazard when the connector is heating. 4. Harnessing and Assembly Instructions
correctly wired and used within the specified If applicable, our special harnessing and/or assem-
parameters. bly instruction has to be adhered to. This is provid-
Incorrect wiring or assembly of the connector or ed at request.
careless use of metal tools or conductive fluids,
or transit damage to any of the component parts
may cause electric shock or burns. Live circuits
must be broken by separating mated connectors
as this may cause arcing, ionisation and burning.
Heat dissipation is greater at maximum resistance
in a circuit. Hot spots may occur when resistance
is raised locally by damage, e.g. cracked or
deformed contacts, broken strangs of wire. Local
overheating may also result from the use of the
incorrect application tools or from poor quality
soldering or slack screw terminals. Overheating may
occur if the ratings in the Product Data Sheet/
Catalogue are exceeded and can cause breakdown
of insulation and hence electric shock.
If heating is allowed to continue it intensifies by
further increasing the local resistance through loss
of temper of spring contacts, formation of oxide ITT Cannon manufactures the highest quality products available in the marketplace; however these products are intended
to be used in accordance with the specifications in this catalog. Any use or application that deviates from stated operating
film on contacts and wires, and leakage currents
specifications is not recommended and may be unsafe. No information and data contained in this catalog shall be construed
through carbonisation of insulation and tracking
to create any liability on the part of ITT Cannon. Any new issue of this catalog shall automatically invalidate and supersede
paths. Fire can then result in the presence of any and all previous issues. A limited warranty applies to ITT Cannon products. Except for obligations assumed by ITT
combustible materials and this may release noxious Cannon under this warranty, ITT Cannon shall not be liable for any loss, damage, cost of repairs, incidental or
fumes. Overheating may not be visually apparent. consequential damages of any kind, whether or not based on express or implied warranty, contract, negligence or
Burns may result from touching overheated strict liability arising in connection with the design, manufacture, sale, use or repair of the products. Product availability,
components. prices and delivery dates are exclusively subject to our respective order confirmation form; the same applies to orders
3. HANDLING based on development samples delivered. This catalog is not be construed as an offer. It is intended merely as an
Care must be taken to avoid damage to any invitation to make an offer. By this publication, ITT Cannon does not assume responsibility or any liability for any patent
infringements or other rights of third parties which may result from its use. Reprinting this catalog is generally permitted,
component parts of electrical connectors during
indicating the source. However, ITT Cannon's prior consent must be obtained in all cases.
installation and use. Although there are normally
no sharp edges, care must be taken when handling Cannon is a trademark of ITT Industries, Inc
certain components to avoid injury to fingers.

31