www.txy-tech.

com

TXY-Tech Product Catalogue

9000 Southwest Freeway, Suite 330, Houston, 77074

Tel: 281-822-8888/8889 Fax: 281-822-9888

1
 Table of Contents

Page 3 TXY Series Sealants

Page 20 Main Injection Systems

Page 27 Tools & Accessories

Page 34 Quick Leak Repair Product

Page 41 Carbon Fibers

Page 44 Safety Products

2
All sealants could be ordered by the size and unit in this chart:

SIZE UNIT
TXY PLUG Φ 0.83" x L 3.54" LB
▲ GALLON
TXY BELT W 1.97" x H 0.20" x L 3.28' PIECE
▲ LB
▲ GALLON
W 1.97" x H 0.20" FOOT
FURMANITE PLUG Φ 0.63" x L 3.15" LB
▲ GALLON
J-STICK Φ 1.38" x L 8.00" PIECE
▲ GALLON

3
 TXY-18

Description: High temperature rubber based sealing compound, brown in color

for both tube and belt form.

Feature: Heat-curing with a wide medium resistance with good flexibility and
pliability.

Applications: Applicable for all kinds of leaks on piping or equipments, i.e. flanges,
pumps, piping, boilers, heat exchangers etc. under high temperature and high
pressure.

Chemical Compatibility: Water, steam, air, oxygen, hydrogen, ammonia, coal gas,
strong alkali, acetic acid, terphenyl, formaldehyde, ether, acetone, ester, oils (coal
gas, petroleum, diesel oil, transformer oil, naphtha, sucking oil, heavy oil, etc.)
muriatic acid, weak vitriol, super alkali, ammonia, etc.

Temperature Range: 175o~1470o F

Storage Conditions: Sealed under normal temperature

Shelf Life: 2 years in an environmentally controlled room, one year if not.

Package: 2.2lbs container with 20 (1.76 oz.) plugs.

4
 Case Study for Using TXY-18

The application of the modified clamp in sealing operation

1. Leaking location and condition

⑴ Leaking location: flange DN150mm at the reserved pump outlet of

the boiler feed water

⑵ Leaking condition：

2. Leaking medium parameter

Working
Leaking System System
condition
medium pressure /PSI temperature/°F
characteristics
302°F →normal
Hot water 3190 302
temperature

3. Sealing operation method

⑴ Clamp structure：Machined to make an annular groove for sealant

5
 and drilled and tapped for injection ports

⑵ Sealant selection：Apply sealant TXY-18#, which will quickly

set up the design pressure.

4. Sealing operation procedure

6
5. Sealing completed：

7
 TXY-18 A

Description: High temperature rubber based sealing compound, brown in color

with white powder like substance on both tube and belt form.

Feature: Heat-curing, upgraded version of TXY-18# sealant, TXY-18A# includes

NANO material in its composition, which significantly improves its heat-resistance
and its sealing efficiency.

Applications: Applicable for all kinds of leaks on piping or equipment, i.e. flanges,
pumps, piping, boilers, heat exchangers etc. under high temperature and high
pressure.

Chemical Compatibility: Water, steam, air, oxygen, hydrogen, ammonia, coal gas,
strong alkali, acetic acid, terphenyl, formaldehyde, ether, acetone, ester, oils (coal
gas, petroleum, diesel oil, transformer oil, naphtha, sucking oil, heavy oil, etc.)
muriatic acid, mild Sulphuric acid, caustic, ammonia, etc.

Temperature Range: 300o~1650oF

Storage Conditions: Sealed under normal temperature

Shelf Life: 2 years in an environmentally controlled room, one year if not.

Package: 2.2lbs container with 20 (1.76 oz.) plugs.

8
 Reduced pipe seal

1. Leaking location and condition

⑴ Leaking location：leak at the joint line of the reduced pipe

⑵ Leaking condition：two heavy leaking points

2. Leaking medium parameter and working condition

Medium Parameter

Medium System temp. /°F System pressure /PSI

steam 356 130

3. Sealing operation method

⑴ Clamp structure

For Large leaks requiring moderate volume of sealant，use perimeter

seal clamp with annular chamber.

9
⑵ Injection method

Starting at the injection port farthest from the leak, fill the cavity with
sealant. When the injection pressure slightly exceeds the internal line
pressure, the leak is sealed.

After

10
 TXY-16

Description: High temperature rubber based sealing compound black in

color for the plugs, brown color for the belt form.

Feature: Heat-curing with high flexibility and pliability;

Application: Applicable for stuffing boxes, rotary pumps and flanges

and for all kinds of leaks on piping or equipments.

Chemical Compatibility: Oils, (high-temperature oil, petroleum,

naphtha, sucking oil, diesel oil, transformer oil), high-temperature
water, steam, alkali, muriatic acid, acetic acid (99%), alcohol, ketone,
terphenyl, formaldehyde, ether and acetone, etc.

Temperature Range: 176 oF -1260oF

Storage Conditions: Sealed under normal temperature

Shelf Life: 2 years in an environmentally controlled room, one year if

not.

Package: 2.2lbs container with 20 (1.76 oz.) plugs.

11
 Case Study for Using TXY-8 \ TXY-16 \ TXY-18

Process Vessel Flange Leak

1. Scope and Methodology

Large Process Vessels can develop a leak at the gasket interface.

Should this occur, the leak can be successfully stopped by injecting
the appropriate sealant. The sealant is injected using just enough
pressure to overcome the leak. A sealing methodology and clamp
are designed and fabricated specifically for the vessel’s operating
parameters.

2. Operating Conditions

A. Shape: Suitable for the gaskets of different shape like round,

oval, square, etc.

B. Temperature and Pressure: For system temperatures from -

180℃～800℃ (-290°F to 1,470°F), system pressure -0.1MPa
～20MPa (-14.5 PSI to 2,900 PSI)；

C. Aperture: Flange joint openings up to 10 mm (3/8 inch)

3. Sealing Options:

A. External Band ( for Operating Pressures up to 300 PSI )

Sealant Injection Access: Bolt Hole Adapter

B. Wire Wrap / External Band ( for Operating Pressures up to

300 PSI )

Sealant Injection Access: Bolt Hole Adapter

C. Flange Clamp: Threaded Injection Port

12
 Sealant Injection Access: Threaded Injection Port

4. Operation procedure

⑴.At the proper location of the flange edge and flange surface, dill the
hole and tape in slant direction, and then connect the injection valve:

⑵.Apply φ4 drill bit to drill through the remaining thickness of the

wall, and let the injection valve face straightly toward the flange
connecting gap.

13
Drill through the remaining thickness of the wall and lead the medium
out

⑶. Pack the metallic wire of proper specification in the flange

connection gap

⑷. Use air hammer to caulk the flange outer edge to block the metallic
wire.

⑸. Close the valve of the initial injection port and connect the injection
gun.

14
 TXY-B8

Description: Graphite based sealing compound, grey/silver in color.

Feature: Thermal-expansion, non-curing, excellent pliability under high

temperature,

Applications: Applicable for stuffing boxes, rotary pumps and rotating shafts etc.

Chemical Compatibility: Oil, water vapor with high temperature, alkali, acetic acid
99%, muriatic acid, ester, alcohol, terphenyl, formaldehyde, ethanol etc.

Temperature Range: 32o-1652oF

Storage Conditions: Sealed under normal temperature

Shelf Life: 2 years in an environmentally controlled room, one year if not.

Package: 2.2lbs container with 20 (1.76 oz.) plugs.

15
 TXY-8

Description: Teflon based sealing compound, white in color.

Feature: Non-curing, very dense, with strong chemical, oil and liquid
resistance.

Applications: Applicable for all kinds of leaks on piping or equipments.

Chemical Compatibility: Water, steam, air, oxygen, hydrogen, coal gas,

ammonia, strong alkali, acetic acid, terphenyl, ether, acetone,
formaldehyde, oils (petroleum, diesel oil, transformer oil, naphtha,
sucking oil, heavy oil, etc.) muriatic acid, weak vitriol, super alkali,
ammonia, etc.

Temperature Range: -380o~500oF

Storage Conditions: Sealed under normal temperature

Shelf Life: 2 years in an environmentally controlled room, one year if

not.

Package: 2.2lbs container with 18 (1.95 oz.) plugs.

16
 TXY-20

Description: High temperature rubber based sealing compound, black

in color.

Feature: Thermal-expansion; heat-curing; outstanding fumes

resistibility;

Applications: Applicable for flanges, valves and all kinds of leaks on

piping or equipments.

Chemical Compatibility: Fume, activator, ethane, and other special

mediums

Temperature Range: 175o~1330oF

Storage Conditions: Sealed under normal temperature

Shelf Life: 2 years in an environmentally controlled room, one year if

not.

Package: 2.2lbs container with 20 (1.76 oz.) plugs.

17
 TXY-22

Description: High temperature rubber based sealing compound, black

in color.

Feature: Thermal-expansion; heat-curing; outstanding fumes

resistibility;

Applications: Applicable for flanges, valves and all kinds of leaks on

piping or equipments.

Chemical Compatibility: Fume, activator, ethane, and other special

mediums

Temperature Range: 175o~1330oF

Storage Conditions: Sealed under normal temperature

Shelf Life: 2 years in an environmentally controlled room, one year if

not.

Package: 2.2lbs container with 20 (1.76 oz.) plugs.

18
 TXY-24T

Description: High temperature rubber based sealing compound, brown

in color.

Feature: Metal wires and glass fibers are added to prevent sealant from
being extruded outside the sealing cavity when the leaking equipment
has an extremely rough and uneven surface.
Temperature Range: 175o~1470oF

Storage Conditions: Sealed under normal temperature

Shelf Life: 2 years in an environmentally controlled room, one year if

not.

Package: 2.2lbs container with 20 (1.76 oz.) plugs.

19
High Pressure Injection Gun (Patent Pending)
Item No. : G201

It is the main tool to carry out the on-line leak sealing technique operation.
Feature: Mechanical reposition

Specifications:
Weight =10.76lbs
Material = Carbon Steel or Stainless
Maximum Pressure: 70mpa or 10,152.6psi

20
Replacement Spring for TXY-II Gun

Item No. : G801

High Pressure Oil Pump

Manual Hydraulic Oil Pump

Item No. : P-32, P-72, P-84, P-392, SYB-1

SYB-1 oil pump P-84 double-acting 2 gun hook up.

21
 P-392 oil pump P-72、P-32 oil pump

The performance index of the manual Hydraulic Oil Pump

Model Rated Flow rate Operation Oil Weight Dimension

pressure pressure capacity (㎏)
(MPa) （㎝ 3/time） (㎝ 3)
(L×W× H)
(㎏)
High Low
pressure pressure

P-72 70 3.10 15.0 44 1147 4.0 612 × 140 × 141

P-32 70 2.60 13.4 44 492 3.6 418 × 140 × 145

P-392 70 2.47 11.26 51 900 4.1 560 × 120 × 176

P-84 70 2.46 16.22 51 2200 10.9 545 × 148 × 170

SYB-1 63 2.3 12.5 51 700 9.0 600 × 100 × 150

22
Air Foot Pump

Item No. : P2810

Air Foot Pump performance index

Air Oil
High pressure Specified discharge Weight
Model pressure capacity
(MPa) (in3/min) (lb)
(MPa) (in3)

Low pressure High pressure

P-2810 63 0.5～0.7 100.7 12.1
80.8 32

Usable Oil Pressure Rating Oil Displacement per Stroke Oil Port
Capacity (MPa) (in3/min) Thread Weight

(in3) 1st Stage 2nd Stage 3rd Stage 1st Stage 2nd Stage 3rd Stage (NPT) (lb)

61 0 35 70 121 32 13.4 3/8 15

（1） The maintenance of the Hydraulic Oil Pump

① Use 32# or 46# hydraulic oil, based on operation environment;
② Infuse the pump oil filtered through 120 – 160 strainer；
③ Gradually boost and release the pressure in operation to avoid oil circuit of lash;
④ Do not adjust the high pressure valve and low pressure valve at will. When necessary, the pump
should be assembled with gauge. Adjust the jack bolt until the pressure reaches its set point.

23
High Pressure Hose

Item No. : G304

The connecting elements for injection gun and injection ports

Specifications:
Max pressure: 10,000 Psi
Material: High temp, wire reinforced rubber
Length: 16.4 feet

Liquid-Filled Pressure Gauge

Item No. : G301

Max Pressure: 10,000 Psi

24
Gauge Strand Joint

Item No. : G302

For connecting Gage and Hydraulic hose coupling to pump.

High pressure Quick Coupling Set

Item No. : G303 (include Male G303-1 and Female G303-2)

G303-2 G303-1

The quick coupling is the device for momentary connection to shut off the fluid passage, containing
plug and socket.

The plug connects to the injection gun and gauge of the high pressure pump oil outlet; the socket
connects to the high pressure hose.

It forms access road after connection, and cut off when separated. Highest bearing pressure is
70MPa.

25
Complete set up (Injection Gun, Pump, and Hose)

Hand Pump Set (P-392, G201, G304, G901)

Foot Pump Set (P-2810, G201, G304, G901)

26
Tools & Accessories

Injection adaptors
Item No. : G401 (standard 12mm), G402 (high pressure 14mm), G403 (low pressure 10mm), G404
(special 8mm)

It is a kind of isolation valve connecting the injection gun and the clamp. Can be tailor made as
requested to customer specifications.

Angle adaptors

Item No. : G405, G406

When there is difficulty in connecting the injection gun for the obstacles around the injection ports, the
adaptor could connect to the clamp through the angle adaptor to adjust the sealing injection position.
The angle adaptors have two type of angle connection for 90°、120°.

27
Injection Rings Adaptors

Item No. : G7012, G7014, G7016, G7018, G7020, G7022, G7024, G7027, G7030, G7032, G7034, G7036

The sealant is injected from bolt hole using injection ring adaptor.

The operation process: choose the proper injection ring adaptor based on the size of the bolt diameter;
unscrew the bolts and nuts; install the injection ring adaptor and tighten the nut; connect the injection
gun. For use on pressures less than 300 PSI in conjunction with a banding system.

Steel Banding/ Strapping

Item No. : G703-1 (0.05” thick x 1- 3/16” width)

Item No. : G703-2 (0.05” thick x 2 -3/8” width)

28
Carbon Steel Strap Clips

Item No. : G704-1 (for 1- 3/16”width)

Item No. : G704-2 (for 2 -3/8” width)

Hand Strap Tightener

Item No. : G701-1 (for 1- 3/16” strap)

Item No. : G701-2 (for 2 -3/8” strap)

Hydraulic Strap Tightener

Item No. : G702 (for 1- 3/16” strap)

29
G-Clamps

Item No. : G707-1 (65mm), G707-2 (85mm), G707-3 (115mm)

G-Clamps are injectable.

Magnetic Quick Tightener

Item No. : Y101

Specifications:
Applicable pressure: under 435 psi.
Applicable temperature: from -77℉~572℉

*The Magnetic Tightener, with its unique design, fastens to leaking surfaces by applying strong
magnetic force.

30
Air Drill
Item No. : G511

Air Hammer/ Peening Gun

Item No. : G512

31
Hose for Air Tools

Item No. : G514

Cordless Drill Kit

Item No. : G611 (includes two 9.6V Ni-Cd Battery, Charger and Tool Case)

32
Injection Tool Box

Item No. : G901

*Comes without lettering on outside of case.

Leak Repair Travel Case

Item No. : T008

33
Quick Leak Repair Products

One-side Open Quick Clamp

Pipe Outer Bolt/Length/Nu Length of Clamp Outer Pressure

Pipe Diameter mber Clamp Diameter Resistance
Model (inch) (inch) (inch) (inch) (psi)
(inch)
1” 1.32 1/16”*1.6*2 3.1 2.05 435

1.5” 1.89 1/16”*1.8*2 3.1 2.68 435

2” 2.36 1/8”*2.4*2 3.1 3.31 348

2.5” 2.97 1/8”*2.4*2 3.1 3.98 348

3” 3.48 1/8”*2.8*2 4.3 4.61 290

4” 4.49 1/8”*2.8*2 4.3 5.59 290

5” 5.51 1/4”*3.5*2 4.8 6.93 261

6” 6.50 1/4”*3.5*2 4.8 7.91 261

8” 8.62 3/8”*5.1*2 6.3 10.08 203

10” 10.75 3/8”*5.1*2 6.3 11.81 203

12” 12.80 3/8”*5.5*2 6.1 13.78 174

14” 14.84 3/8”*5.5*2 6.1 15.75 174

34
Product Characteristics:

This product is mainly used on small to medium-sized pipes. Because the diameter of the product
is adjustable, it saves time and capital for welding while maintains repair quality. This
technology is widely implemented in shipyards, power plants, oil refineries, natural gas
transportation and water supply & drainage systems etc.

On the inner side of the product, TXY belt form sealant should be placed to chemically stop the
leak with the structure laid by the Quick Clamp.

Two-side Open Quick Clamp

Product Characteristics:

The highlighted feature of this product is that it could be applied on large size of pipes because
of the two-side open clamp design. The diameter of the product is adjustable, so it saves time and
capital for welding while maintains repair quality. This technology is widely implemented in
shipyards, power plants, oil refineries, natural gas transportation and water supply & drainage
systems etc.

On the inner side of the product, TXY belt form sealant should be placed to chemically stop the
leak with the structure laid by the Quick Clamp.

35
 Pipe Pipe Outer Bolt/Length/ Length of Clamp Outer Pressure
Model Diameter Number Clamp Diameter Resistance
(inch) (inch) (inch) (inch) (inch) (psi)
1” 1.32 1/16”*1.6*2 3.1 2.05 435

1.5” 1.89 1/16”*1.8*2 3.1 2.68 435

2” 2.36 1/8”*2.4*2 3.1 3.31 348

2.5” 2.97 1/8”*2.4*2 3.1 3.98 348

3” 3.48 1/8”*2.8*2 4.3 4.61 290

4” 4.49 1/8”*2.8*2 4.3 5.59 290

5” 5.51 1/4”*3.5*2 4.8 6.93 261

6” 6.50 1/4”*3.5*2 4.8 7.91 261

8” 8.62 3/8”*5.1*2 6.3 10.08 203

10” 10.75 3/8”*5.1*2 6.3 11.81 203

12” 12.80 3/8”*5.5*2 6.1 13.78 174

14” 14.84 3/8”*5.5*2 6.1 15.75 174

Quick- Wrap II
Item No. : Z204

Quick-Wrap II is a manually-handling, easily-operated, industrial-strength, compound and threads

combined wrap that repairs leaks on straight pipe, elbow, tee, union, threads, flange and flange port, etc.
*Use in lieu of wire for multi wrap.

36
Heat-proof Quick Steel Paste
Item No. : Z201

It consists of the following three types, and the main glue A is off-white paste, firming agent B is black
paste, and accelerant C is white powder

Usage and Features

1. Proportioning glue, A:B:C=6:2:1 (weight ration), able to make adjustments for proportioning subject to the
requirement
2. Method of blending glue, mainly used in manual kneading (wearing plastic gloves), the blended glue materials
are black paste, which could be used in any direction, free from running and shrinkage, and as hard as stone
after being solidified.
3. It could be solidified within 0.5-4 hours under normal temperature or within a few minutes under high
temperature.
4. It could be used for a lone time under 40-+200 , and at the place without oxygen, the temperature could reach
as high as 350 .
5. Shearing strength>12Mpa and compression strength>30Mpa.
6. The three groups could be stored as long as two years under a normal temperature with the stable
performance.
7. It could resist water, oil, steam, weak acid, weak alkali and other organic solvents.
8. The glue prepared under normal temperature and low temperature could be coated on the spot, used on the
high temperature and stream spots. The prepared glue should be placed in the open air for half an hour, and
only after the glue is not sticky, could it be used.
9. The A group becomes hard due to the low temperatures and should be used after being softened through
drying.
10. As for the cold place, if the glue is heated with steam, airbrush, hair drier, hot-water bag, or high-temperature
bulb, the solidification could be much better.

Application Scope and Examples

1. It could paste metal, ceram, glass, cement, bakelite, hard plastic, etc.
2. Equipment holes could be mended with manual glue, convenient for operation.
3. Piping break could be mended with glass fabric dipped cloth, which could seal and solidify the piping.
4. The cable joint could be kneaded and closed from any direction.
5. The groove of the wedged lathe guide rail could be used for nicking. (The grinding wheel is used to make the
V trough in the groove, then small close holes are drilled, and finally it is cleaned for wedging)
6. As for the crack caused by spray leakage holes, the machine should be shut off temporarily to discharge
pressure, paste should be made as soon as possible, and the machine could be restarted after being
solidified, which means special tools could be spared.
7. Tip pasting flange gasket for sealing the broken water (oil).
8. Holes caused by corrosion of oil tank or natural gas tank could be repaired with pressure.
9. Glue instead of welding is used to repair the broken pump.
10. Concreting and repairing the sliding and worn of screw and nut.
11. Filling hydraulic glue-filling gun to seal leakage of flange, pipe and screw joint caused by high or low

37
 temperature.
12. Wedging holes and leakage in chinaware, cylinder, metal pail and wooden basin. The glue consists of two
types, namely large package 2.25kg.set, and small package 1kg/set.

PSI Epoxy Putty Quick Repair Series

Item No. : Z111 (FastSteel)

Used for repairing steel products: repairing crack in engine cylinder body, filling foundry sand hole,
sealing leaking pipeline, and restoring defect steel parts.

Item No. : Z112 (QuikAluminum)

Able to repair leaks on aluminum or aluminum alloy, vessel, casting, doors and windows.

38
Item No. : Z113 (QuikCopper)

Able to solve leakage problems on copper pipe, valve, nozzle, tap and radiator.

Item No. : Z115 (QuikWood)

A hand-kneadable, fast-setting polymer compound for permanent repairs to wood.

Item No. : Z117 (RepairitQuik)

Serves multi-purpose and enjoys quick solidifying duration. Able to paste metal, wood, glass, ceramics
and other materials.

Item No. : Z118 (AquaMend)

Able to repair and fix under-water leaking parts, especially effective on leakage sealing of FRP, bathtub
and PVC pipe.

39
Thortex Metal-Tech E.G.
Item No. : Z312

Two component epoxy engineering repair compound.

Metal-Tech EG is an engineering grade metal rebuilding system. Simple and

safe to use, Metal-Tech EG has outstanding adhesion to all metals giving long
lasting repairs to the toughest applications.

40
 Carbon Fiber Wrap System

Fast. Reliable. Economical. Pipeline Reair

HydraWrap Repairs Leaking Pipes in Only 30 Minutes with Common Tools

HydraWrap is an ultra-strong carbon fiber composite material that resists chemicals and corrosion and is
ideal for use on degraded thin-wall or through-wall piping. The repair system involves no hot work and
can be installed with common tools in less than 30 minutes time.

41
Engineered specifically for quick, long-lasting repairs of degraded piping, HydraWrap is ideal for
“problem pipes” in industrial, municipal, marine and pipeline market applications. HydraWrap is
an engineered repair that provides a substantial savings for public works departments which are
looking for ways to conserve time and money.

 Restores Structural Integrity

 Repairs Corrosion Damage
 Prevents Leaks
 Extends Ser vice Life
 Prevents Downtime
 Environmentally Safe
 Chemical Resistant
 Adapts to Different Shape and Size Pipes
 Alternative to Clamps & Sleeves

TYPICAL APPLICATIONS
 Gas and Liquid Pipelines
 Water Pipelines
 Small Utility Lines
 Chemical Plants
 Refineries
 Brine Pipelines
 Tanks and Storage Vessels

TYPICAL USES
 Repairs Metal Wall Loss
 (due to corrosion)
 Repairs Mechanical Damage (dents
with a gouge)
 Restores or Increases Operating
Pressures
 Under Insulation Coating (UIC )
 Wear-Resistant Coatings (e.g.
saddles)
 Corrosion Protection

42
Ideal for marine and industrial pipeline repair - provides a corrosion barrier for degrading piping
(thin wall & through wall). Installed with common tools in less than 30 minutes, HydraWrap
prevents unplanned shutdowns. NEW!! Marine HydraWrap can now be used underwater!

ADVANTAGES
 Requires no hot work
 Rapid installation, permanent repair
 Conforms to various shapes and sizes
 Chemical and Corrosion Resistant
 100% Solid (No VOCs)
 ABS Design Approved
 NSF Certified
 Requires no post cure (except HT)
 Ready made kits available for various shapes and sizes
 Restores Maximum Allowable Operating Pressure (MAOP)

INDUSTRY STANDARDS
API 570 Piping Inspection Code Section 8.1.4 – Non Welding Repairs (On Stream)
ASME PCC-2 4.1 and 4.2, Repair Standard, Non-Met allic
Composite Repair Systems for Pipelines and Pipe work: HIGH RISK
ABS Design Assessment Steel Vessel Rules

DOT 49 CFR Parts 192 and 195

American Concrete Institute – ACI 440.2R-08, Guide for the Design and Construction of Externally Bonded
FRP Systems for Strengthening Concrete Structures.

Standard, Acid and High Temp

Multiple Kit Sizes
Bulk product also available. Contact TXY-Tech for detail

43
Safety Products

Nano Infused Visor

Safety Helmet with Faceshield Item No. : T005

Guaranteed not to Fog or Steam up.

Heat-resistant aluminum foil exposure suit 1. Overall water-proof garment

Item No. : F107 2. Aluminum foil suit

3. Acid-proof heat-insulation leather suit

44
 Acid and heat proof long gloves Safety Glasses

Anti-noise Earphone Ear Plugs

See our Brochure for more information!

You can also visit our website:
www.txy-tech.com

45