DelVal SERIES 56/57

High Flow Resilient Seated Butterfly Valves DelTech

Wafer & Lug , Sizes 2”-24” / DN50-DN600
2”-12” Class 150 / 285 PSI
14”-24” PN16 / 230 PSI

Leading the Industry with Innovation by Design

DelTech Controls is pleased to offer top-of-the-line products in pipeline flow control. The DelVal Series 56 (wafer body) and Series 57 (lug
body) Butterfly Valves have been developed with extensive application, design and manufacturing expertise. These products are produced
by employing modern manufacturing practices under a robust quality assurance system. These practices ensure consistent product
quality and dependable performance. The DelVal Series 56/57 Butterfly Valves have been designed to include state-of-the-art features that
are described in this bulletin.

1
Features 2
1. High Strength Stem - Stem 7
connection available in standard 4
DelVal sizes .
8
2. Top plate drilled to fit ISO 5211 3
dimensions. All handles, gear
operators, pneumatic and electric
DelTorq actuators are designed to 9
mount directly to DelVal Valves. 10

3. Four flange locating ribs for sizes

up to 12” and four flange locating 5 6
holes from size 14” to 24” for easy 11
alignment of valve during 12
installation. They meet ANSI #125
/150 or other world drilling
standards.
13
4. Unique stem retention system to
provide blow-out proof stem and
easy assembly and disassembly of
valve.

5. Unique “integral rubber rich seat” 7. Heavy duty acetal bushing 11. High flow disc design provides
in various elastomeric materials absorbs the forces acting on the a streamlined flow passage,
provides ultimate sealing in a wide stem/disc assembly due to line enhanced flow characteristics and
variety of applications. Integral pressure. reduced resistance to flow
rubber rich seat offers all the especially for control applications.
8. The secondary sealing is
advantages of a cartridge seat and achieved through double integrally
the integrity of one-piece body/seat molded ‘O’ rings which are 12. Nylon PA 12 coated disc option
design. This construction allows compressed around the stem. ensures excellent cor rosion
easy installation between tightly resistance to several chemical
spaced flanges without using flange 9. Positive disc stem engagement media. The hard, non-porous
spreader. Offers 100% bi-directional by a precision machined square sintered polymer has very low
sealing against vacuum and dead drive, eliminating potential leak path hygroscopicity and is suitable for
end service to full rated pressure and failure of stem joint. use in drinking water and food grade
without the use of a downstream applications.
flange. 10. Precision machined radius on
the upper and lower disc hubs is
6. Heavy duty one-piece body. pressed against upper and lower 13. Flange gasket (’O’ ring) is
Standard coating is two coats of seat sealing faces for achieving integral to the body lining which
hard, zinc-rich epoxy for excellent primary sealing between disc and eliminates the need of separate
corrosion resistance. seat. gasket.
 Engineering
ØG H
J

SEE CHART FOR ACTUATOR

MOUNTING FLANGE DRILLING ØG
KEY

45°

J
E

FOR 14" & ABOVE

ØD
Sq. F

K
BC LUG VALVE

ØA B

Valve Size TOP FLANGE DRILLING Key LUG BOLTING DATA Weights In Lbs
ØA EB ØD E Sq'F' NO. OF HOLE
ØG H J Size K NO. OF THREADS Wafer Lug
Inches DN BC HOLES DIA. BC HOLES UNC/UN-2B (Series 56) (Series 57)
2 50 3.54 1.69 2.83 4.13 1.96 1.96 4 0.27 0.55 0.39 0.78 - 1.29 4.75 4 5/8-11 4.96 6.61
2 1/2 65 4.13 1.81 3.46 4.48 1.96 1.96 4 0.27 0.55 0.39 0.78 - 2.02 5.50 4 5/8-11 5.73 7.82
3 80 4.80 1.81 4.13 4.72 1.96 1.96 4 0.27 0.55 0.39 0.78 - 2.67 6.00 4 5/8-11 6.83 8.92
DIMENSIONS (Inch)

4 100 6.02 2.06 5.31 5.31 1.96 1.96 4 0.27 0.63 0.43 0.78 - 3.52 7.50 8 5/8-11 9.92 15.43
5 125 7.24 2.19 6.45 5.90 2.75 2.76 4 0.39 0.75 0.51 1.25 - 4.54 8.50 8 3/4-10 15.87 23.58
6 150 8.26 2.19 7.40 6.49 2.75 2.76 4 0.39 0.75 0.51 1.25 - 5.45 9.50 8 3/4-10 17.19 26.23
8 200 10.39 2.38 9.52 8.07 3.93 2.76/4.01 4 0.39/0.47 0.87 0.63 1.25 - 7.38 11.75 8 3/4-10 31.41 41.33
10 250 12.44 2.69 11.49 9.25 3.93 4.01 4 0.47 1.18 0.87 2.0 - 9.30 14.25 12 7/8-9 47.61 65.25
12 300 14.56 3.06 13.62 10.82 3.93 4.01 4 0.47 1.18 0.87 2.0 - 11.11 17.00 12 7/8-9 66.13 97.00
14 350 16.22 3.06 15.11 12.20 4.72 4.92 4 0.55 1.38 - 2.00 0.39x0.39 12.70 18.75 12 1-8 88.18 123.01
16 400 18.42 4.00 17.24 13.38 4.72 4.92 4 0.55 1.38 - 2.00 0.39x0.39 14.65 21.25 16 1-8 132.71 186.51
18 450 20.66 4.48 19.40 14.56 Ø6.89 5.51 4 0.70 1.57 - 2.36 0.31x0.47 16.52 22.75 16 1 1/8-8 196.21 240.30
20 500 22.75 5.00 21.57 15.74 Ø6.89 5.51 4 0.70 1.57 - 2.36 0.31x0.47 18.43 25.00 20 1 1/8-8 239.20 309.08
24 600 26.96 6.06 25.59 18.30 Ø8.27 6.50 4 0.83 1.97 - 2.76 0.39x0.47 22.55 29.50 20 1 1/4-8 385.80 477.07

Valve Size TOP FLANGE DRILLING Key LUG BOLTING DATA Weights In Kg
ØA EB ØD E Sq'F' NO. OF HOLE
ØG H J Size K NO. OF THREADS Wafer Lug
Inches DN BC HOLES DIA. BC HOLES UNC/UN-2B (Series 56) (Series 57)
2 50 90 43 72 105 50 50 4 7 14 10 20 - 32.7 120.7 4 5/8-11 2.25 3.00
2.5 65 105 46 88 114 50 50 4 7 14 10 20 - 51.4 139.7 4 5/8-11 2.60 3.55
3 80 122 46 105 120 50 50 4 7 14 10 20 - 67.8 152.4 4 5/8-11 3.10 4.05
DIMENSIONS (mm)

4 100 153 52 135 135 50 50 4 7 16 11 20 - 89.5 190.5 8 5/8-11 4.50 7.00

5 125 184 56 164 150 70 70 4 10 19 13 32 - 115.3 215.9 8 3/4-10 7.20 10.70
6 150 210 56 188 165 70 70 4 10 19 13 32 - 138.4 241.3 8 3/4-10 7.80 11.90
8 200 264 60 242 205 100 70/102 4 10/12 22 16 32 - 187.6 298.5 8 3/4-10 14.25 18.75
10 250 316 68 292 235 100 102 4 12 30 22 51 - 236.4 362.0 12 7/8-9 21.60 29.60
12 300 370 78 346 275 100 102 4 12 30 22 51 - 282.4 431.8 12 7/8-9 30.00 44.00
14 350 412 78 384 310 120 125 4 14 35 - 51 10x10 322.4 476.2 12 1-8 40.00 55.80
16 400 468 102 438 340 120 125 4 14 35 - 51 10x10 372.3 539.7 16 1-8 60.20 84.60
18 450 525 114 493 370 Ø175 140 4 18 40 - 60 8x12 419.8 577.8 16 1 1/8-8 89.00 109.00
20 500 578 127 548 400 Ø175 140 4 18 40 - 60 8x12 468.1 635.0 20 1 1/8-8 108.50 140.20
24 600 685 154 650 465 Ø210 165 4 21 50 - 70 10x12 572.7 749.3 20 1 1/4-8 175.00 216.40

* Face to Face dimension "B", generally conforming to API 609 Category A//BS EN 558-1 Series 20/ISO 5752 Series 20/MSS SP 67/ASME B 16.10
All bolt holes 1 1/8” and larger have a 8-UN thread series as per API 609
Valve Size 2" 2.5" 3" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 24"
50 62 106 115 241 360 484 878 1409 2366 3064 3684 5795 6741 9601
Full Rated
(Lb.-Inch)

100 72 124 142 256 393 545 977 1586 2677 3527 4428 7273 8441 12482
TORQUE

Pressure Valve
P, PSI 150 80 142 177 271 426 582 1083 1756 2987 3980 5178 8756 10126 15576
230 150 212 283 478 575 1062 1859 2823 4142 6106 8187 10550 13329 26809
285 177 248 354 540 637 1150 2168 3098 4673 - - - - -
Reduced Disc Dia. P, PSI 50 - - - 133 187 267 623 771 1259 2159 2627 3649 4285 6500

3.5 7 12 13 27 41 55 99 159 267 346 416 655 762 1085

Full Rated 7 8 14 16 29 44 62 110 179 302 398 500 822 954 1410
TORQUE

Pressure Valve
(Nm)

10 9 16 20 31 48 66 122 198 337 450 585 989 1144 1760

P, Bar
16 17 24 32 54 65 120 210 319 468 690 925 1192 1506 3029
Class 150 20 28 40 61 72 130 245 350 528 - - - - -
Reduced Disc Dia. P, Bar 3.5 - - - 15 21 30 70 87 142 244 297 412 484 734
 Material of Construction
Body Stem
5 Cast Iron ASTM A126 Class B 5 410 Stainless Steel ASTM A479 Type 410 STEM BUSHING (ACETAL)
5 Ductile Iron ASTM A536 Grade 65-45-12 5 ASTM A564 17-4-PH

Disc Seat
5 DI ASTM A 536 Grade 65-45-12 + Epoxy coated 5 EPDM - Food Grade STEM
5 316 Stainless Steel ASTM A351 Grade CF8M 5 Buna-N - Food Grade
5 Nylon 12 Coated Ductile Iron ASTM A536
Grade 65-45-12 (Optional)

General Design and Manufacturing Pressure Rating:

For bi-directional bubble tight shut off and BODY
Standard: API 609 / BS EN -593
full vacuum service with disc in the closed
Testing Standard: API 598 / BS EN 12266-1 position.

Seat Temperature Range: Inch DN PSIG BARG

Temperature Range 2”- 24” 50-600 50 3.5
Seat Type DISC
Min. Max. 2”- 24” 50-600 150 10
EPDM -130 F (-250C) 3020 F (1500C) 2”- 24” 50-600 230 16
BUNA-N -130 F (-250C) 2120 F (1000C) 2”- 12” 50-300 285 Class150

Dead-End Ser vice : Without a RETAINER PIN STEM

downstream flange installed, the dead-
end pressure ratings are equal to the
values stated above.
Operators

Valves up to size 8” can be supplied Valves up to size 24” can be direct All valves can be direct mounted with
with lever handles for manual mounted with gear operators for pneumatic actuators or electric
operation. Optional accessories for manual operation. Gear operators actuators and accessories for
hand-lever operation can be provided can also be attached with chain- complete automation options such
for various flow control requirements. wheel operators for opening or as fail open/close & positioner
Pad locking can also be provided for closing valves located on controlled. Valves can be mounted
preventing unauthorized operation. pipelines at high elevations. with manual overrides. Taurus Presentation-DELVAL03/10

All statements, technical information and recommendations in the bulletin are for general use only. DelTech is not responsible for suitability or compatibility of these products in
relation to system requirements. Consult DelTech distributors or factory for the specific requirements and material selection for your intended application. DelTech reserves the
right to change or modify product design or product without prior notice. DelVal® - Registered trademark of DelTech Controls.

DelTech Controls LLC DelVal Flow Controls Pvt. Ltd.

Distributor 6068 Highway 73 (A division of DelTech Controls LLC, USA)
Geismar, LA 70734 Office & Works : Gat. No 625/1/2,
USA Kuruli, Tal. Khed, Pune-Nasik Highway,
Pune 410501, INDIA
PC.BFV.005.00

Phone: (225) 744-4326 Phone :+91-2135-662700

Fax: +91-2135-662727
Fax: (225) 744-4328
Email : [email protected] Email : [email protected]

Ó 2010 Deltech Controls. All rights reserved Website : www.deltechcontrols.com

EDD-FT-017