KEY INDUSTRY

Automation
for industrial gates
and commercial doors
 CT102 and CT202 TURBO ELECTROMECHANICAL IRREVERSIBLE GEAR
230 Vac CT102 and CT202 control units for 1 or 2 High reliability system control unit with sel-
MOTOR FOR SLIDING GATES FROM 1600 Kg
TO 4000 Kg
Electronic
motors in 230 Vac with active and passive flearning and ideal parameters self-program-
safety controls and connection for receiver. ming.

Main operational features: Amperometric obstacle detection with run

PLUS: Easy programming with LCD display for

intuitive parameters setting.
inversion.

Flashing light output fixed or

flashing. With slowdown function in both
Application versatility basic parameters opening and closing to preserve
already set by default with the possibility to LED courtesy light output and open gate your gate integrity
select additional functions entering a second indicator.
level of programming. Electronic and mechanical parts
New plug-in radio receiver 4 channels RX4. well protected from external
Maximum safety thanks to motor force and agents
speed regulation, slowdown in opening and
closing, encoder detection. Easy maintenance thanks to the
horizontal control unit position
*
One control unit suitable for all
230 Vac motors TURBO 160 TURBO 250

With fixing plate included

CT400 and CT401

400 Vac
Electric brake, to grants safety
also on heaviest installations
CT400 and CT401 are control units for (Turbo 400)

Electronic
one motor in 230 or 400 Vac.
For industrial installations
The tri-phase power is the ideal solution
for industrial and intensive use instal-

PLUS:
lations.

The main features are:

Suitability for extreme performance

with installation presenting heavy gates
and frequent operation.

Maximum safety with safety edge in- TURBO 400

tegration possibility and amperometric
system fot the obstacle detection. TURBO 160 TURBO 250 TURBO 400
SC162
TECHNICAL DATA SC-100 SC-244 SC252M SC400M
SC162M

control unit - CT102 CT400 *** CT102 CT400

power Vac (Vdc) 230 230 400 230 400
consumption power W 700 700 650 580 750
motor consumption A 3 3 1,5 4 2
capacitor µF 20 20 - 35 -
protection degree IP 44 44 44 44 54
torque Nm 40 40 63 57 180
speed** cm/s 16 16 18 18 17
thrust force N 1000 1000 1450 1300 3500
max gate weight kg 1600 1600 2500 2500 4000
thermoprotection °C 150° 150° - 150° 150°
insulation class 1 1 F 1 1
working cycle % 30 30 50 40 50
working temperature °C -20° + 55° -20° + 55° -20° + 55° -20° + 55° -20° + 55°
weight kg 13,5 13,5 15,5 16 76
* New color available while stocks last 2012 ** Variable value according to gate weight
*** Suggested control unit
2 3
 Electromechanical barrier ALT ELECTROMECHANICAL IRREVERSIBLE BARRIER
ALT Thanks to our new Key Automation bar- Fluidity of motion thanks to the double
FOR BAR FROM 4 TO 6 m, 24 Vdc AVAILABLE
riers access control for apartment blocks balanced springs for a more linear WITH DOUBLE BUILT-IN LED FLASHING LIGHT
PLUS: and companies can be easily and safely
fulfilled. ALT KP and ALTP have unique
and inedited esthetical, mechanical and
movement, without bouncing effect.

Double built-in led flashing light in

electronic plus. the ALT KP version.

Versatility of applications with two dif- Quality overall barrier box surface pro- On 6 m. model ALT has double
ferent bar size, from 4 to 6 m and many tected by a thick anti-UV orange peel spring to counter balance
different accessories to complete and epoxy powder coating. movement and make it more
enhance the installation. fluent, without bumps
Easy and fast installation universal
Reliability in the long term thanks to box with simple right or left bar installa- Anti-UV orange peel
the robust levering and mechanisms tion depending on need. epoxy power coating
suitable to resist to frequent movement.
Robust gears and levers for
reliable functioning over time

Performance increase: 3,5 sec

opening time for 4m barrier and
6 sec for 6 m barrier

Encoder for the obstacle

CT-724S
24 Vdc
detection and immediate run
inversion
New electronic board CT-724S applica- Linear acceleration and deceleration

Electronic
tion: in opening and closing to make barrier Linear acceleration and
deceleration to make opening
motion as smooth as possible.
and closing run as smooth as
Performance and opening speed No bouncing effect. possible

PLUS:
improvement 3,5 seconds for 4m
model and 6 seconds for the 6 m model. Comfort possibility to extract the control For an intensive use, for private
unit and program it in a standing posi- and public solutions
Intelligent system bar will automatically tion for the installer comfort. ALT 4KP ALT 4P
reverse its run thanks to the encoder Energy saving modality in ALT 6KP ALT 6P
obstacle detection. Suitable for an intensive use. stand by

Safety soft start and soft stop in order Energy saving possibility of connection Possibility to extract the control
to preserve the mechanics and to limit to solar pannel and battery. unit and program it in standing
position for installer comfort and
maintenance need.
easy access
ALT 4KP-6KP ALT 4P-6P
Universal box: fast and easy TECHNICAL DATA BR4-24KP BR-624KP BR4-24P BR-624P
installation of right or left bar
depending on installation need control unit CT-724S CT-724S CT-724S CT-724S

power Vac (Vdc) 230 (24) 230 (24) 230 (24) 230 (24)
consumption power W 150 150 150 150
motor rpm rpm 1200 1200 1200 1200
motor consumption A 6 6 6 6
capacitor µF - - - -
opening time sec 3.5 6/*12 3,5 6/*12
max bar length m 4 6 *(8 mt) 4 6 *(8mt)
working cycle % 80 80 80 80
working temperature °C -20° + 55° -20° + 55° -20° + 55° -20° + 55°
weight kg 35 43 35 43
protection degree IP 54 54 54 54
* with 8m boom (AST8)

4 5
 Sharp SHARP ELECTROMECHANICAL GEAR MOTOR
SHARP Among most powerful models in the time Wide range of products to satisfy FOR ROLLING SHUTTERS, FROM 170 Kg
market with capacity up to 170 (SHARP each installation need and each context.
TO 350 Kg
PLUS: 60), 320 (SHARP 60BM) o 350 kg
(SHARP 76 BM). High quality and attention for details.
Several tests are performed during raw
Safe while operating, offers a good materials working, final assembly and
reversibility in case of power failure. packaging.
Provided with magnetic electrobrake to Semi-automatic limit switch,
enable run stop regardless the load and Resistant to wear without any particu- easy and intuitive
its position. lar maintenance need.
Excellent performance thanks
Simple structure with a single re- Sharp BT: Motors with limit switch in to noiseless adaptor
duction group of gears designed to su- low voltage 24Vdc. An additional safety
stain harsh usage. Easily controlled with for your installation. Electromagnetic brake version
manual release in case of emergency.
Neat design with single robust
Suitable for both private and commer- gearmotor
Fast, with continuous working for more cial installations, adaptable to different
than 7 minutes at 230Vac (above CE shaft diameters 42/48/60. SHARP 60 SHARP 60BM
Good reversibility in case of
standards). power failure

Extremely silent while working and du- Low maintenance required with
ring stop according to specific tests over good resistance to wear

Fast, working continuously

CT-1EB and CT-1EBR for more than 7 minutes with

230 Vac
230Vac voltage. Performance
above market standards
CT-1EB and CT-1EBR are control units Flashing light output, photocells, limit

Electronic
which gather quality, reliability and con- switch and open gate indicators.
venience on the same time.
Versatile because suitable for double

PLUS:
The main features are: motors too. SHARP 76 SHARP 76BM
Simplicity and intuitivity during
installation.

Precise and reliable, with run speed

regulation.

Built-in radio receiver with remote SHARP 60 SHARP 60BM SHARP 76-76BM
self-learning.
SW6200 SW6200BT SW12200
TECHNICAL DATA SW6240E SW6240EFE SW12240E SW12240EFE
SW6200EF SW6 200EFBT SW12200EF

control unit CT-1EB / - CT-1EB / CT-1EB / CT-1EB / CT-1EB / CT-1EB /

CT-1EBR CT-1EBR CT-1EBR CT-1EBR CT-1EBR CT-1EBR
power Vac 230 230 230 230 230 230 230
motor consumption W 600 600 1200 600 600 1200 1200
strength A 2,8 2,8 5,6 2,8 2,8 5,6 5,6
torque Nm 175 175 325 185 185 370 370
working cycle % 30 30 30 30 30 30 30
speed rpm 10 10 10 8 8 8 8
working temperature °C -20° + 55° -20° + 55° -20° + 55° -20° + 55° -20° + 55° -20° + 55° -20° + 55°
max gear stroke m 6 6 6 6 6 6 6
thermoprotection °C 170° 170° 170° 170° 170° 170° 170°
capacitor µF 20 20 35 18 18 35 35
weight kg 9 - 10 9 - 10 13.5 - 14.5 12 13 16,5 17,5

6 7
 Wind pro - Wind light pro
WIND Key Doors are a new series of straight TECHNICAL FEATURES

>Fast opening to
sliding hi-tech automatic systems for Key Doors are provided with a 24 Vdc

PLUS: very intensive use, with high technical

content and silent operation. They offer
many features mixed with quality and
motor, a microprocessor electronic con-
trol panel and an electronic impact-free
device with encoder.

manage goods and

reliability and are easy to install and pro-
gram. The traction unit and the electro- Control unit learn door weight and stroke
nic control panel in one unit reduce the length with a simple self learning proce-

people flow in full

assembly time. dure. The casing is made of aluminum
extrusion and, thanks to a special loca-
Moreover Key Doors offers solutions ting hook system, there is the possibility

comfort
with appropriate anti-panic break-out to “hold open” the profile cover without
devices allowing easy access to escape supporting it. Faults are displayed on the
routes. The complete range offers so- selector screen.
lutions for all requirements of size, use
and weight.

2
7

1
4

12

13

9
8
10
11

3
14

15 16

PART IDENTIFICATION

1. 10 MICRON CHEMICAL SILVER OXIDIZED ALUMINIUM 8. EMERGENCY BATTERY UNIT

BAR AND 500 mm STEP CAPACITY 9. CONTROL UNIT
2. MECHANICAL STOP 10. ELECTROMECHANICAL STOP
3. OXIDIZED ALUMINIUM BOX 11. BELT
4. CARRIAGE 12. TRANSMISSION PULLEY
5. ADAPTOR 13. BOX SIDE PLUG
6. TRACTION BRACKETS 14. DIGITAL SELECTOR WITH MICROPROCESSOR
7. MOTOR WITH ENCODER 15. FLOOR GUIDANCE
16. PLATE WITH HINGE AND NYLON BLOCK
8 9
WIND AUTOMATION FOR SINGLE LEAF
SLIDING DOOR UP TO 160 Kg OR DOUBLE
WIND AUTOMATION FOR SINGLE LEAF
SLIDING DOOR UP TO 120 Kg OR DOUBLE
PRO LEAF UP TO 130+130 Kg LIGHT PRO LEAF UP TO 80+80 Kg

Self-bearing cover for an Self-bearing cover for an

easier inspection from outside easier inspection from outside

External digital key pad to External digital key pad to

program, select, set-up program, select, set-up
functions withoutoperating on functions withoutoperating on
control unit control unit

Manual selector with knob for Manual selector with knob for
an easy standard functions an easy standard functions
selection selection
CONTROL UNIT
Operating status led Equipped with connectors and terminals for the connection of: Operating status led
CONTROL UNIT
Equipped with connectors and terminals for the connection of:
Battery charge monitoring Main power Battery charge monitoring
Motor power Main power
Safety device surveillance Safety device surveillance Motor power
Cyclic counter

Battery Cyclic counter

Electromechanical stop Battery

Function selector Electromechanical stop

Function selector
Possibility to program the door via digital Possibility to program the door via digital
selector with display EASY selector with display EASY

Characteristics: Characteristics:
Visualization of door status mode Visualization of door status mode
Programming Programming
Parameters regulation Parameters regulation
Diagnostic Diagnostic
Parameters control Parameters control

TECHNICAL DATA TECHNICAL DATA

power supply 230 V 50/60 Hz power supply 230 V 50/60 Hz
consumption max 150 W consumption max 80 W
accessories power 24 Vdc accessories power 24 Vdc
battery charger charge voltage 27,5 Vdc I max 200 mA with control in voltage battery charger charge voltage 27,5 Vdc I max 200 mA with control in voltage
electric motor 24 Vdc maximum power 100 W electric motor 24 Vdc maximum power 100 W
opening speed adjustable max 70 cm/s (for leaf) opening speed adjustable max 70 cm/s (for leaf)
closing speed adjustable max 60 cm/s (for leaf) closing speed adjustable max 60 cm/s (for leaf)
anti-crushing device standard anti-crushing device standard
opening pause time adjustable from 0 to 60 sec. opening pause time adjustable from 0 to 60 sec.
operating temperature -20° + 55° operating temperature -20° + 55°
transmission type toothed belt transmission type toothed belt
protection degree IP 22 protection degree IP 22
max weight one leaf 160 Kg max weight one leaf 120 Kg
max weight two leaves 130 Kg + 130 Kg max weight two leaves 80 Kg + 80 Kg
use intensive use intensive

10 11

DOORS
 000SIND000E13 REV.01

KEY AUTOMATION S.r .l .

Via Alessandro Volta, 30
30020 Noventa di Piave
VENEZIA - Italy
T. +39 0421 307456 - F. +39 0421 65698
[email protected] - www.keyautomation.it