Name of Project: Proposed Hotel Building For Krishna Group@ Velachery

Name of Work: Summary for Electrical BOQ RRP

SL NO. DESCRIPTION AMOUNT

A Electrical-High Side 1,972,816

1 SUB HEAD-1 ( HT CABLES ) 428,535
2 SUB HEAD-2 ( HT PANELS )
3 SUB HEAD-3 ( COMPACT SUB-STATION )
4 SUB HEAD-4 ( CONTROL CABLE ) 374,214
9 SUB HEAD-5 (EARTHING) 447,078
10 SUB HEAD-6 ( SAFETY ITEMS ) 202,433
11 SUB HEAD-7 ( YARD FENCING ) 4,469
12 SUB HEAD-8 ( CABLE MARKER ) 3,871
13 SUB HEAD-9 ( CEIG APPROVAL ) 512,216

B Electrical-Low Side 16,213,663

1 SUB HEAD-1 ( POINT WIRING ) 5,862,610
2 SUB HEAD-2 ( SUBMAINS ) 1,199,686
3 SUB HEAD-3 ( LT CABLES ) 2,387,722
4 SUB HEAD-4 (OCCUPANCY SENSOR) 92,318
5 SUB HEAD-5 ( CABLE TRAY ) 1,583,865
6 SUB HEAD-6 ( BUS DUCT & RISING MAIN ) 1,765,362
7 SUB HEAD-7 ( DISTRIBUTION BOARD ) 380,578
8 SUB HEAD-8 ( LIGHT FIXTURE ) 1,200,008
9 SUB HEAD 9 (UPS) 418,189
10 SUB HEAD 10 ( FIRE SEALENT ) 71,682
11 SUB HEAD 11 ( MISC. ITEMS ) 46,050
12 SUB HEAD-12 (EARTHING) 987,282
13 SUB HEAD-13 (EARTHING) 218,309
C Guest Room 4,974,685

D Panels guest Floors 6,075,452

E Gas Flooding System

F SUB HEAD-1 ( LIGHTNING PROTECTION SYSTEM) 380,963

G DG,Plumbing & HVAC 2,200,506

I Kitchen 3,371,620

TOTAL AMOUNT 35,189,705

GST 18% 6,334,147

Grand Total 41,523,852

This Rates is Valued till

1 Valued date for rates
March 2023
Warranty 1.8 Year date
2 Warranty
commissioning
3 Plumbing System loanding & unloanding scope By Vendor

Plumbing System NO
advance . 5%Shop drawing
approval .70% pro-date
againts material reach at
4 Payment teams site.10% installation at site
as per drawing. 10%
Commissioning & Testing
completed. 5% Retention
after DLP .

5 Hotel Experience YES

Electrical Technician after commissioning completed hand over to marriott Chief engineer
6 Yes
work at hotel 2nos for #3month. Daytime duty.
7 Tools and tackles 1 set hand over to Marriott Chief Engineer or PMC Yes

ENVIRONS
(Building Services Consultants)
Name of Project: Proposed Hotel Building For Krishna Group@ Velachery
Name of Work: Electrical BOQ-High Side RRP
SL NO. DESCRIPTION UNIT QTY RATE AMOUNT
SUB HEAD-1 ( HT CABLES )

Supply and laying of cable in Tray/in pipe/clamped to wall with suitable clamps saddles and fixing bolts/ in
ground and including testing and commissioning of 11KV grade 3C x 300Sqmm ,Conductor composed of
1 standard Aluminium Conductor Screened with extruded semi-conducting compound,, XLPE Insulated,
insulation screened with extruded semi-conducting compound in combination with copper tape,cores laid
up, with inner sheath of PVC Tape Type ST1,Galvanized steel flat strip armoured,Outer Sheath of extruded
PVC type ST2 compound, conforming to IS: 7098/P-II/1985 with latest amendments up to date. The HT Cable
is not Earthed.
1.1 3 Core x 300 Sq.mm Meter 70 1,958.21 137,075
1.2 3 Core x 70 Sq. mm Meter RO 818.82
-

Supply and laying of cable in Tray/in pipe/clamped to wall with suitable clamps saddles and fixing bolts/ in
ground and including testing and commissioning of 11KV (E) grade 3C x 300Sqmm ,Conductor composed of
1A standard Aluminium Conductor Screened with extruded semi-conducting compound,, XLPE Insulated, -
insulation screened with extruded semi-conducting compound in combination with copper tape,cores laid
up, with inner sheath of PVC Tape Type ST1,Galvanized steel flat strip armoured,Outer Sheath of extruded
PVC type ST2 compound, conforming to IS: 7098/P-II/1985 with latest amendments The HT Cable is Earthed.
1A.1 3 Core x 300 Sq. mm Meter RO 1,958.75
1A.2 3 Core x 70 Sq. mm Meter RO 818.82
-
Supplying and making Indoor end termination with cast resin compound including aluminium lugs and other
2 jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of -
11 KV grade as required.
2.1 3 Core x 300 Sq. mm Nos. RO 5,855.46
2.2 3 Core x 70 Sq. mm Nos. RO 5,288.80
-
Supplying and making outdoor end termination with cast resin compound including aluminium lugs and
3 other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor -
cable of 33 KV grade as required.
3.1 3 Core x 300 Sq. mm Nos. 8 8,121.20 64,970
3.2 3 Core x 70 Sq. mm Nos. RO 6,516.56
-
4 Supply, installation , Testing & commissioning of Heat Shrinkable type Straight Through jointing kits suitable -
followings cables.
4.1 3 Core x 300 Sq. Mm (Including Site spares) Nos. 10 9,726.88 97,269
4.2 3 Core x240 Sq. mm (Including Site spares) Nos. RO 9,349.85
4.3 3 Core x 70 Sq. mm (Including Site spares) Nos. RO 7,423.21
-

5 Supplying and fabricating of MS structural steel supports for H.T. / L.T.cables using U channels, MS angle iron,
bolts, nuts, anchor bolts etc., required for the work, cut to the size, bent to shape, welding, grouting etc.,
complete.with 2 coats of spray paint with required colour for different system as mentioned above. Kg. 200 124.43 24,885
-
Providing & fabricating of MS Chequered plates - 8mm thick for closure of cable trenches / shafts etc., with
6 MS angle & required supports accessories & 2 coats of paint as confirmed by consultant /client
representitive. Sqm 5 5,414.41 27,072
-

7 Design, manufacture , Supply, installation of factory fabricated hot dip galvanized ladder type cable tays, -
with radial bends, supports and fixing hardware etc with of the following sizes as per specification. The rate
shall also include for suitable ready-made radial bends/reducers, necessary GI support , supporting down
rods, anchor fasteners etc. including cutting, drilling holes, painting etc. as required.
7.1 600MM WIDE CABLE TRAY RM 20 1,667.89 33,358
7.1.1 Runners 20 x 75 x 20 x 2.5 mm -
7.1.2 Rungs 20 x 30 x 20 x 2.5 mm 250 mm C/C -
1.1.3 3 No. Suspenders 32 x 32 x 4 mm GI angle 1800 mm C/C -
-
7.2 450 MM WIDE CABLE TRAY RM 10 1,393.03 13,930
7.2.1 Runners 20 x 75 x 20 x 2.5 mm -
7.2.2 Rungs 20 x 30 x 20 x 2.5 mm 250 mm C/C -
7.2.3 Suspenders 3 Nos. 25 x 25 x 4 mm GI angle 1250 mm C/C -
-

Design, manufacture , supply and fixing in position the perforated type cable trays of the following sizes for
supporting 1.1 KV grade armoured/ unarmoured aluminum / copper conductor cables. The hot dip
galvanised type will be with 2-2.5mm thick GI CRCA sheet with expansion coupler plates duly hot dip
8 galvanized, with bolts, washer and nuts. Knock out holes for cable connections as per approved design. The -
tray should comply with the specification of NEC (National Electric Codes) and NEMA (National Electric
Manufacturers Association). The steel should be as per IS:226 and hot dip galvanizing as per IS :2629/BS
729/ASTM 123. The rate shall also include for suitable readymade radial bends/reducers, necessary GI
support , supporting down rods, anchor fasteners etc. including cutting, drilling holes, welding, painting etc.
as required.
8.1 300 x 40 x 40 x 2 mm thick cable tray RM 10 1,655.58 16,556
8.2 150 x 40 x 40 x 2 mm thick Cable tray RM 10 1,342.03 13,420
-

SUB HEAD-1 Total Amount 428,535

ENVIRONS Page 1
(Building Service Consultants)
 SUB HEAD-2 ( HT PANELS )
RING MAIN UNIT (01 NO. INCOMING LBS AND 02 NOS. OUTGOING VCB)
Design, manufacturing, testing at works, supplying, installation , testing and commissioning of non-extensible,totally
enclosed, metal clad,floor mounting , fully outdoor rated, Compact Ring Main Unit, including supervision during
installation testing & commissioning, comprising of 2 Nos. Ring switches and 1No. Vacuum Circuit Breaker Unit in one
1 housing suitable for installation in 11kV, 500 MVA, 3 phase, 3wire 50 cycle , effectively earthed system. Nos. 1 621,368.30 621,368

Fully compartmentalized, non extendable, dust/vermin/corrosion proof, powder coated,fully type tested, SCADA
compatible, battery and battery charger, relay and other control accessories), internal arc tested for rated fault current
rating for 1s as per IEC-62271-200 (on front, lateral side and rear), outdoor type,metal enclosed mounted upon
suitable size ISMC-100 channel, properly grouted and suitable for 11kV, 630A, 26.3kA for 3sec, 50Hz, AC with SF6
insulated compact switchgear enclosed in stainless steel tank (thickness as per type test design) having IP67 degree of
protection,outer structure made up of 2mm thick Aluzinc sheet,internal partitions of 1.5mm thick Aluzinc approved -
danger and arc flash signages and with all components as mentioned in BOQ, specifications and schedule, complete as
required.

Incomer Ring Switch-2 nos. -

630A, triple pole, single break having three distinct positions ON, OFF & Earth. -
Independent manual spring operated closing / opening mechanism with mechanical ON, OFF, & Cable EARTH
indicator. -
Operating handle for ON, OFF, & EARTH suitably interlocked to provide minimum three seconds delay between any
two operations (common for isolator and switch fuse unit) -
Fully interlocked cable test access . -
Set of 3-phase cable earthing contacts. -
Oil level indicator. -
Drain plug for draining oil -
Cable box suitable for 1 x 3C x 300 sq. mm XLPE cable with heat shrinkable / push on type termination. -
Ougoing VCB - 1 nos. -
Surge arrester (1 Nos.)
9kV,10kA, metal oxide varistor type surge arrestor suitable fo both lightning and switching surges,complete with its -
bushings and earthing terminations etc. as required.

11kV, 50Hz, 630A, 3P, 26.3kA for 3 sec rated and internal arc tested for rated fault current rating for 1s as per IEC-
62271-200 (on front, lateral side and rear) , VCB breaker with 24 volts DC closing including suitable power pack and
tripping coils, with a provision of secondary trip coil and 230 Volts AC spring charging motor, inbuilt antipumping relay,
inbuilt earth switch or earth truck as the case may be, potential free NO & NC contacts required in addition to 4 spare
NO and 4 spare NC contacts,LED indication (on, off , trip),emergency button, push buttons(on, off ), auto/manual
selector switch, termination facility for 11/11kV (UE) 3C x 300 sqmm aluminium armoured cable, VPIS (voltage
presence indication system), inbuilt earth switch of suitable rating connected on the cable side and mechanically -
interlocked with VCB, spring charge indication, solenoids, interlocks, 6 window annunciation as described in
specifications or schedules complete as required.

-
Numeric relay (1 Nos.)
Numeric relay module with LCD dislpay having following inbuilt protection functions :
Over voltage, frequency , phase sequence, instantaneous overcurrent,instantaneous earth fault,overcurrent, earth
fault, restricted earth fault protection of transformer, high winding temperature and high oil temperature, suitable to
record and store at least 100 events with date and time with last five fault records stored in nonvolatile memory and
with self supervision function, 4 spare digital binary inputs and 4 spare digital output contacts in addition to those
required as per the scheme, modbus communication protocol, breaker control (on/off) along with 3No. 11kV ,100/5A, -
15VA, CL-5P10 current transformers, complete as required.

PT fuse failure relay - 1 Nos.

Buchholz Relay - 1 nos.
Auxilliary relays for WTI & OTI - 01 no. -

-
Notes :
- Cubicle shall be type tested for internal arc for all compartment for 26.3KA for 1sec as per IEC 62271-200 -
-
Design, supply, installation, testing and commissioning of one no. metering cubicle with electronic trivector
meter (Outdoor type) complete with all accessories as required.
2 Nos. 1 197,669.03 197,669

SUB Total 819,037

SUB HEAD-3 ( COMPACT SUB-STATION )

supply, shifting, Installation, Testing & Commissioning of Outdoor type Compact Sub-station substation
1 1000kVA, 11KV/433V (Oil TYPE TRANSFORMER) - 1 2,836,120.89 2,836,121

Outdoor type package substation with facility for internal lighting, earthing, padlocks etc. Connection
between RMU & transformer will be by 3 nos. 1Cx300 sq.mm. Aluminum XLPE cable and connections from
1.1 transformer to LT ACB will be by Aluminum busbar connections. -
-
1.2 Package/Compact substation will have the following equipments:- - -
HT Switchgear: 3 Way Non Extensible Unit with 2Nos. 630A Isolators and 1No. 200A Circuit Breaker – QTY: 1 No.
3 Way, 11kV, indoor non extensible free standing metal clad SF6 insulated ring main unit type Ringmaster
comprising of two numbers 630A fault making/ load breaking switches and one number 200A tee-off circuit
breakers complete with all accessories as listed below:
• IDMT RELAY for Circuit Breakers – Self Powered, Merlin Gerin type VIP35
1.2.1
• The Ring Switches and Tee-Off Circuit Breaker are provided with Integrated Earthing Switches with Making -
Capacity.
• Live cable indicator for ring switches.
• SF6 Gas pressure indicator.
• Padlocking facility.
• Shunt trip coil
Transformer: rated
1 No. for 230V AC.
11KV/433V, 1000kVA three phase, DYn11, off circuit tap links of rating +5% to -5% @
2.5%, Oil Type Transformer with OCTC with Cu winding and standard fittings. Temperature rise 90 degree -
celsius above ambient of 40 deg. celsius, class ‘A’ insulation (Transformer, RMU, Switchgear make shall
preferably be same) – 1 No.
1.2.1 -
Transformer losses shall be standard with IS-1180 Level-2 tolerance
PSS shall be type tested for internal arc as per IEC 62271-202 of 20KA @ 1sec -
1.3 Transformer Accessories - -
Winding Temperature indicator - -
- -
1.4 LT BUSBARS- ALUMINIUM - -
Voltage Rating- 433V - -
Current Rating- 1600A - -
- -
1.5 LT PANEL - -
1.5.1 Incomer - -

ENVIRONS Page 2
(Building Service Consultants)
1.5.2 ACB, 1600A, 3Poles, 50KA, manual fixed microprocessor based over current, short circuit and earth fault release - -
1.5.3 On, OFF, TRIP lamps - Provided. - -
- -
Installation, Shifting, Testing & Commissioning of 1000KVA 11KV / 0.433KV, 3phase 50Hz Compact Sub-
1.6
station , as mentioned in above item etc. complete as required at site & approved by the consultant. set 1 41,252.67 41,253

Supplying and filling gravels etc as per local requirement for complet transformer,HT Panel,Meter board and
2 RMU area at site. LOT 1 25,782.92 25,783

SUB HEAD-3 Total Amount 2,903,156

ENVIRONS Page 3
(Building Service Consultants)
 SUB HEAD-4 ( CONTROL CABLE )
-

Supply and laying in Control Cable Tray/clamped to wall with suitable clamps saddles and fixing bolts/ in
ground including the cost of digging and back filling with sand and brick protection as required and including
testing and commissioning of the following 1100 volt grade armoured PVC/XLPE insulated and sheathed
1
aluminium conductor armoured cable complete as required. The costs shall include for all cables to be
provided with a 1D gap and shall be properly clamped with cable clamps and ties. Identification tags shall be
provided for all cables and route markers for cables in ground.

1.1 30cx2.5 sq mm Copper Cable RM 30 914.43 27,433

1.2 24cx2.5 sq mm Copper Cable RM 150 729.76 109,464
1.3 12cx2.5 sq mm Copper Cable RM 125 378.21 47,277
1.4 6cx2.5 sq mm Copper Cable RM 70 217.25 15,208
1.5 4cx2.5 sq mm Copper Cable RM 150 152.08 22,811
1.6 2cx2.5 sq mm Copper Cable RM 30 98.83 2,965
Cable Termination - -
Making cable end terminations including brass double compression 'crimping type copper lugs for 'cable
2 - -
sizes mentioned below of '(Glands form part of Panels / DB's)
2.1 30cx2.5 sq mm Copper Cable Nos. 3 1,171.40 3,514
2.2 24cx2.5 sq mm Copper Cable Nos. 10 983.55 9,836
2.3 12cx2.5 sq mm Copper Cable Nos. 10 675.45 6,755
2.4 6cx2.5 sq mm Copper Cable Nos. 10 452.28 4,523
2.5 4cx2.5 sq mm Copper Cable Nos. 10 441.75 4,417
2.6 2cx2.5 sq mm Copper Cable Nos. 4 431.43 1,726

3 Supply and laying of the following RCC Hume Class NP_2 pipe including excavation, refilling including - -
compaction of soil as required for cable/wires including the cost of sealing the ends as required complete

3.1 200 Dia RM 40 1,245.24 49,810

3.2 150 dia RM 10 1,031.32 10,313
4 Cable Trench excavation and back filling including the cost of digging and back filling with sand and brick - -
protection as required

4.1 1000mm x 600mm RM 50 1,163.28 58,164

SUB HEAD-4 Total Amount 374,214

SUB HEAD-5 (EARTHING)

Pipe Earth Electrode using 38 mm dia class B GI pipe complete as per IS 3043 with salt, charcoal, brick
masonary chamber with heavy duty RCC cover ( suitable to take fire tender load) tender truck movement) of
1 12 14,180.60 170,167
450mm x 450mm x 300mm chamber.(Earth strip to be left upto the Earthpit for Connection).

Nos
- -
Plate Earth Electrode using 58mm dia Class B GI plate of size 600 x 600 x 6 mm thick.with heavy duty RCC
cover ( suitable to take fire tender truck load) of 450mm x 450mm x 300mm chamber.(Earth strip to be left
2 RO 25,782.92
upto the Earthpit for Connection).
Nos
- -
Plate Earth Electrode using 38 mm dia Class B copper plate of size 600 x 600 x 6 mm thick.with heavy duty
RCC cover ( suitable to take fire tender truck load) of 450mm x 450mm x 300mm chamber.(Earth strip to be
3 2 21,915.48 43,831
left upto the Earthpit for Connection).
Nos
- -

Supply and laying, Testing and commissioning of copper/GI Strips/wire for interconnecting the earthing
stations ,panels,of the following sizes in built up trenches /surface/wall/ground complete with holes &
fixing,jointing / terminating accessories as per specifications & drawing as required. (Quantity shall be paid as
4 per the actual measurement as executed, however direct measurement shall not excced the quantity - -
indicated in drawing approved .

4.1 For Body Earthing - -

4.1.1 75 mm x 5 mm GI strip RM 100 256.75 25,675
4.1.2 50 mm x 6 mm GI strip RM 10 205.40 2,054
4.1.3 40 mm x 5 mm GI strip RM 10 156.03 1,560
4.1.4 25 mm x 5 mm GI strip RM 10 84.93 849
4.1.5 25 mm x 4 mm GI strip RM 10 67.15 672
4.1.6 25 mm x 3 mm GI strip 51.39 -
- -
4.2 For Neutral Earthing - -
4.2.1 75 mm x 6 mm Cu strip RM 10 3,593.55 35,936
4.2.2 50 mm x 6 mm CU. strip RM 60 2,216.94 133,016
4.2.3 40 mm x 5 mm CU. Strip RM 10 1,620.49 16,205
4.2.4 25 mm x 5 mm CU. Strip RM 10 947.01 9,470
4.2.5 25 mm x 4 mm CU. Strip RM 10 764.33 7,643
4.2.6 25 mm x 3 mm CU. Strip 584.60 -
SUB HEAD-5 Total Amount 447,078

ENVIRONS Page 4
(Building Service Consultants)
 SUB HEAD-6 ( SAFETY ITEMS )
SUPPLYING, INSTALLATION OF SAFTEY ITEMS
Supply and fixing in position the approved “Shock Treatment Charts” written in English and Local Language.
1 These charts shall be framed in teak wood frame and covered with glass. Nos 5 1,632.34 8,162

Supply and fixing in position the best quality Danger Boards of approved shape and size as specified by Local
2 Nos 5 343.65 1,718
Electricity Authorities written in English & Local Languages.

3 Supply and fixing in position the approved single line diagram in 1000 x 800 mm size lamination in the sub Nos 5 6,015.85 30,079
station.
4 Supply & fixing of tool kit with 1 pair 33 KV rubber hand gloves of approved make. Sets 2 2,577.38 5,155
5 Supply & fixing of first aid box of approved make as per specification. Nos 2 1,718.25 3,437
6 Supply and fixing in position 1100/415volt LT Grade rubber matting as per IS 15652 RM 50 1,890.08 94,504
7 Supply and fixing in position 11Kv HT Grade rubber matting as per IS 15652 RM 10 2,277.18 22,772
8 Supply & fixing of FIRE BUCKET STAND Nos 10 3,660.66 36,607

SUB HEAD-6 Total Amount 202,433

SUB HEAD-7( YARD FENCING )

1 Supply & installation of chain link fencing in 40x6 MS angle frame work all around the RMU Room & HT RM RO 4,469.04 4,469
Matering Room 40x40x6 mm steel angle vertical support of 2.5 Meter height with lockable gates including
providing concrete foundation for all vertical supports and kick wall of height 400 mm all around .
SUB HEAD-7 Total Amount 4,469

SUB HEAD-8 ( CABLE MARKER )

1 Supply & fixing of cable route marker of round type insulated “HT cable “ “LT cable joint” etc. as the case Nos. 10 387.10 3,871
may be by providing an angle support and cement concrete for foundation , curing etc. Markers shall be
project 300 mm above ground level . These markers shall be placed at a distance not excedding 50 Meter.
SUB HEAD-8 Total Amount 3,871

SUB HEAD-9( CEIG APPROVAL )

Preparation of drawings, getting approval, completion Report, Arranging for Inspection and attending to
defects report and preparation of as fitted drawings and obtaining Safety Certificate from CEIG / local
1 authorites(TNEB) for commissioning. Liaison with the Chief Electrical Inspectorate Lot 1 219,521.25 219,521
Note:-The necessary approval/inspection shall be considered in two phased manner (For core shell and final
completion.)

1.1 Obtain the power load sanction from Supply Authority for 11kV. Job 1 292,695.00 292,695

SUB HEAD-9 Total Amount 512,216

ENVIRONS Page 5
(Building Service Consultants)
Project Name: Proposed Hotel Building For Krishna Group@ Velachery
Title: Electrical BOQ - Low Side RRP
SL NO. DESCRIPTION UNIT QTY. RATE AMOUNT

SUB HEAD-1 ( POINT WIRING )

Supply, installation , Testing & commissioning of power points, 6A switch socket outlets using necessary
materials like 25 mm dia MS conduit & other conduit accessories , 2x2.5+1x1.5 sq.mm FRLS PVC insulated
wire ,6A switch , 16 G GI box and other pint wiring accessories & carrying out surface / concealed wiring. The
1 rate shall include earthing of all points . The quoted rates shall also include MS coated metal flexible & all Nos. 808 2,134 1,724,261.90
accessories , tools,labour etc. No separate payment will be made for wall chasing , cleaning of debris , rough
plastering the chased wall/floor . The rate shall include looping between points. All accessories shall be IS
approved.

Supply, installation , Testing & commissioning of power points, 2x6A switch socket outlets using necessary
materials like 25 mm dia MS conduit & other conduit accessories , 2x2.5+1x1.5 sq.mm FRLS PVC insulated
wire ,6A switch , 16 G GI box and other pint wiring accessories & carrying out surface / concealed wiring. The
2 rate shall include earthing of all points . The quoted rates shall also include MS coated metal flexible & all Nos. 52 1,756 91,320.84
accessories , tools,labour etc. No separate payment will be made for wall chasing , cleaning of debris , rough
plastering the chased wall/floor . The rate shall include looping between points. All accessories shall be IS
approved.

The rate shall include chasing in wall for installation of conduits, putting Jbs/Dbs in brick/brick wall etc. after
a) installation , doing proper plastering with cement and complete the job in accordance with direction of engineer - -
in charge.
b) Special notes for quoting Point wiring - -
c) I) Make of switch as per approved list. - -
ii) In calculation the cost of point wiring it must be noted that the max. nos. of points that may be considered for
d) one circuit shall be ten to fifteen points or less such that connected load is equal . - -

e) iii) The rate shall include looping between MCB/switch/socket/Exhaust fan/Light points etc. with 2x2.5 - -
+1x1.5sq.mm Wire.
iv) The rate shall be worked out considering the average ceiling height of 4 Meter. However , it is the
f) responsibility of the contractor to ensure that all building parameters, including height , possible length of - -
wiring requited in accordance with point wiring is assessed & include in the rate . No extra claims will be
entertained on this account.
1.1 Switch controlled Light points - -
a) 1 Light point controlled by 6A switch Nos. 770 1,213 933,970.97
b) 2 Light point controlled by 6A switch Nos. 250 1,792 447,904.99
c) 3 Light point controlled by 6A switch Nos. 20 2,371 47,423.19
d) 4 Light point controlled by 6A switch Nos. 15 2,950 44,247.45
e) 5 Light point controlled by 6A switch Nos. 12 3,529 42,352.44
f) 6 Light point controlled by 6A switch( Guest Room ) Nos. - 4,109 -
g) 7 Light point controlled by 6A switch( Guest Room ) Nos. - 4,688 -
h) 8 Light point controlled by 6A switch Nos. RO 5,268
i) 9 Light point controlled by 6A switch No RO 5,848
- -
1.2 MCB controlled Light points - -
a) 2 Light point controlled by MCB Nos. 67 1,912 128,072.15
b) 3 Light point controlled by MCB Nos. 16 2,780 44,486.39
c) 4 Light point controlled by MCB Nos. 32 3,736 119,557.18
d) 5 Light point controlled by MCB Nos. 8 5,191 41,525.27
e) 6 Light point controlled by MCB Nos. 12 6,166 73,986.43
f) 7 Light point controlled by MCB Nos. 12 7,140 85,684.96
g) 8 Light point controlled by MCB Nos. 32 8,115 259,689.32
h) 9 Light point controlled by MCB Nos. RO 9,090
i) 10 Light point controlled by MCB Nos. 3 10,065 30,195.14
j) 11 Light point controlled by MCB Nos. RO 11,040
k) 12 Light point controlled by MCB Nos. 8 12,015 96,118.41
- -
2.0 LIFT Shaft Lighting : Supply, Installation, testing & Commissioning - -
2.1 comprising of : - ( basement-2+ G+9 floors ) Passenger Elevator - -
a. With 1 X 40 LED Bulk Light Fixture - 12Nos - -
b. 6/16A 5 Pin switched socket outlet - 12 sets - -
c. Wiring for 12 light points controlled by a 6A switches. - -
d. Wiring for pit light using 2 Nos 6 A 2 way switches. - -
e. Wiring for 1sets of 5 A switched & socket outlets. - -
wire for lighting circuit : 3 runs of 2.5 sq.mm FRLS wire in MS Conduit. - -
wire for power circuit : 3 runs of 4.0 sq.mm FRLS wire in MS Conduit. - -
Conduit: 25 mm dia MS Conduit. Set 4 42,575 170,299.47
- -
Wiring for 6 pin 240 volt 16 amp single phase and neutral switch socket primary outlets (2 outlet wired on 1
circuit) with 4.0 sq. mm PVC insulated stranded copper conductor 1100 volt grade FRLS wires in 25mm dia MS
surface/concealed conduit including cost of providing saddles etc as required for surface conduiting and/or cost
of cutting and filling chases as required and including providing and fixing of a 6 pin 240 volt 16 amp socket
outlet with safety shutters and 16 amp 240 volt single pole grid plate mounted switch with moulded cover
3 plate in a recessed zinc chromate passivated MS box including earthing of the 3rd pin with 2.5 sq mm 1100 volt Nos 275 2,014 553,718.84
grade PVC insulated stranded copper conductor wire complete as required. 2x2.5+1x2.5sq. mm. Note- The
conduit size and no. of wires in the conduits will be as per IE standard.

ENVIRONS Page 6
(Building Services Consultants)
 - -
Wiring for 6 pin 240 volt 20 amp single phase and neutral switch socket primary outlets (1 outlet wired on 1
circuit) with 4.0 sq. mm PVC insulated stranded copper conductor 1100 volt grade FRLS wires in 25mm dia MS
surface/concealed conduit including cost of providing saddles etc as required for surface conduiting and/or cost
of cutting and filling chases as required and including providing and fixing of a 6 pin 240 volt 16 amp socket
outlet with safety shutters and 16 amp 240 volt single pole grid plate mounted switch with moulded cover
4 plate in a recessed zinc chromate passivated MS box including earthing of the 3rd pin with 2.5 sq mm 1100 volt Nos 120 2,919 350,330.35
grade PVC insulated stranded copper conductor wire complete as required. 2x4+1x4sq. mm. Note- The conduit
size and no. of wires in the conduits will be as per IE standard.( for Split AC)

- -
Supply and installation of surface conduit including cost of providing saddles etc for surface conduiting and/or
5.0 cost of cutting and filling chases for recessed conduiting. - -

5.1 20 mm MS RMT 1,000 108 107,740.48

5.2 25 mm MS RMT 1,000 122 121,642.48
- -
Supply and installation of concealed conduit including cost of providing saddles etc for surface conduiting
6 and/or cost of cutting and filling chases. - -

6.1 20 mm PVC RMT 1,000 58 58,214.62

6.2 25 mm PVC RMT 1,000 69 68,641.11
- -
Supply and installation of surface/concealed conduit including cost of providing saddles etc for surface
7 conduiting and/or cost of cutting and filling chases. - -

7.1 20 mm FRLS RMT 1,000 58 58,214.62

7.2 25 mm FRLS RMT 1,000 69 68,641.11
- -
Supply and installation of flush mounted Enhanced Category 6 T 568 A or B) outlet. The plastic shall be high
8 impact, flame-retardant, UL rate thermoplastic. Dust cover / blank shall be provided to protect unused - -
faceplate openings. Termination caps and plastic cover shall be provided to protect jack wiring.
Single outlet faceplate with RJ-45 jack with information outlet Nos. - 565 -
- -
Supply and installation of flush mounted Category 6 T 568 A or B outlet. The plastic shall be high impact, flame-
9 retardant UL rated thermoplastic. Dust cover / Blank shall be provided to protect unused face plate openings. - -
Termination cap and plastic cover shall be provided to protect jack wiring.
Single outlet face plate with RJ-11 jack Nos. - 348 -
- -
Supply, installation, testing and commissioning of 4 pair Category 6 UTP cable in existing conduit consisting of 23
10 AWG solid copper conductors and as per the specification. The cable should have flexible jacket and ripcord for RMT - -
easy stripability.
RO 31
Supply and fixing following signal outlets with grid plate in 1.6 mm thick GI box complete including cutting,
11 chases, fixing of GI boxes and making good. (Cover plate shall match the colour, size and make of wiring - -
accessories to be used in the project).
TV Signals outlet Nos. - 369 -
- -
12 Supply, laying, connecting and commissioning of RG-6 co-axial cable of MATV as per specification in existing RMT 98 27 2,639.64
conduit. - -
13 Supply, laying, connecting and commissioning of RG-11 co-axial cable of MATV as per specification in existing Nos. RO 36
MS conduit - -
14.0 Supply, erection, testing and commissioning of following tap off with boxes for CATV system. - -
14.1 Two way (T-2) Nos. RO 391
14.2 Three way (T-3) Nos. RO 456
14.3 Four way (T-4) Nos. RO 586
-
15.0 Supply, erection, testing and commissioning of spliter with boxes. -
15.1 Two way (S 2) Nos. RO 391
15.2 Three way (S 3) Nos. RO 456
15.3 Four way (S 4) Nos. RO 586
- -
16.0 Wiring for Industrial sockets / Outlets - -
Wiring for 415 volts three phase and neutral 16 amps polycarbonate splash proof (IP-66) industrial plug and
socket outlet with Junction Box 16 amps 4 Pole MCB in polycarbonate enclosure of approved size and design
16.1 with 4 x 4 sq.mm PVC insulated copper conductor 1100 volts grade stranded flexible FRLS wires in concealed or Nos. 2 19,897 39,794.47
surface mounted 32 mm dia MS conduit including providing and fixing of 5 pin industrial plug and socket and
fixing of 5 pin industrial plug and socket and earthing of earth pin of the socket outlet with 4 Sq. mm PVC
insulated copper conductor stranded flexible FRLS wire.
Wiring for 415 volts three phase and neutral 25 amps polycarbonate splash proof (IP-66) industrial plug and
socket outlet with Junction Box 25 amps 4 Pole MCB in polycarbonate enclosure of approved size and design
16.2 with 4 x 6 sq.mm PVC insulated copper conductor 1100 volts grade stranded flexible FRLS wires in concealed or Nos. 2 25,968 51,936.13
surface mounted 32 mm dia MS conduit including providing and fixing of 5 pin industrial plug and socket and
fixing of 5 pin industrial plug and socket and earthing of earth pin of the socket outlet with 4 Sq. mm PVC
insulated copper conductor stranded flexible FRLS wire.
-
SUB HEAD-1 Total Amount - 5,862,610
-
SUB HEAD-2 ( SUBMAINS ) -
Wiring for Submains with FRLS PVC insulated stranded copper conductor 1100 volt grade wires in MS surface
1 conduit/ and making suitable end connections complete as required and as below. -

1.1 5Rx 16 sqmm including 32 mm MS conduit RM 134 918 123,065.70

1.2 5Rx 6 sqmm including 32 mm MS conduit RM 100 434 43,356.86
1.3 3Rx10 sqmm including 32 mm MS conduit RM 65 453 29,424.45
1.4 3Rx6 sqmm including 32 mm MS conduit RM 2,710 349 946,979.16
1.5 3Rx4 sqmm including 32 mm MS conduit RM 50 270 13,511.00
1.6 3Rx2.5 sqmm including32 mm MS conduit RM 100 231 23,138.52
1.7 3Rx1.5 sqmm including 32 mm MS conduit RM 100 202 20,210.78
-
SUB HEAD-2 Total Amount - 1,199,686
-
SUB HEAD-3 ( LT CABLES ) -
Supply and laying of cable in Tray/clamped to wall with suitable clamps saddles and fixing bolts/ in ground and
including testing and commissioning of the following 1100 volt grade armoured XLPE insulated FRLS and
sheathed aluminium/ copper conductor armoured cable complete as required. The costs shall include for all
1 cables to be provided with a 1D gap and shall be properly clamped with cable clamps and ties. Identification -
tags shall be provided for all cables and route markers for cables in ground.

1.1 3.5cx400 Sq. mm. Al. Ar. XLPE FRLS Cable RM RO 1,997
1.2 3.5cx300 Sq. mm. Al. Ar. XLPE FRLS Cable RM 743 1,631 1,211,854.72
1.3 3.5cx240 Sq. mm. Al. Ar. XLPE FRLS Cable RM RO 1,276
1.4 3.5cx185 Sq. mm. Al. Ar. XLPE FRLS Cable RM RO 1,002
1.5 3.5cx150 Sq. mm. Al. Ar. XLPE FRLS Cable RM 20 792 15,830.90
1.6 3.5cx120 Sq. mm. Al. Ar. XLPE FRLS Cable RM 20 680
1.7 3.5cx95 Sq. mm. Al. Ar. XLPE FRLS Cable RM 20 547 10,930.45
1.8 3.5cx70 Sq. mm. Al. Ar. XLPE FRLS Cable RM 25 427 10,665.44
1.9 3.5cx50 Sq. mm. Al. Ar. XLPE FRLS Cable RM 190 317 60,256.47
1.10 3.5cx35 Sq. mm. Al. Ar. XLPE FRLS Cable RM 95 246 23,359.70
1.11 3.5cx25 Sq. mm. Al. Ar. XLPE FRLS Cable RM 110 199 21,886.96
1.12 3.5cx16 Sq. mm. Al. Ar. XLPE FRLS Cable RM 165 157 25,948.95
1.13 3.5cx10 Sq. mm. Al. Ar. XLPE FRLS Cable RM RO 133
1.14 3.5cx6 Sq. mm. Al. Ar. XLPE FRLS Cable RM RO 106
1.15 3cx4 Sq. mm. Al. Ar. XLPE FRLS Cable RM RO 96
1.16 3.5cx25 sq mm Al. Ar. XLPE FRLS Cable RM 140 199
1.17 4cx16 sq mm Al. Ar. XLPE FRLS Cable RM 80 157
1.18 3.5cx10 sq mm Copper. Ar. XLPE FRLS Cable RM 80 507
1.19 3.5cx6 sq mm Copper. Ar. XLPE FRLS Cable RM 140 336 47,075.64
1.2 4cx4 sq mm Copper. Ar. XLPE FRLS Cable RM RO 232
1.21 3cx4 Sq. mm. Copper. Ar. XLPE FRLS Cable RM 125 178 22,264.92
- -

ENVIRONS Page 7
(Building Services Consultants)
 Supplying and making terminal joints for the following size of 1.1 KV XLPE insulated FRLS aluminium/ copper
conductor conductor armoured cables including providing heavy duty Aluminium terminal crimping lugs,
2 solder, insulation tape, approved sealing epoxy compound, double compression brass compression cable - -
glands, effecting gland connections and effecting terminal connections to the equipment complete as required.

ENVIRONS Page 8
(Building Services Consultants)
2.1 3.5cx400 Sq. mm. Al. Ar. XLPE FRLS Cable RM RO 5,829
2.2 3.5cx300 Sq. mm. Al. Ar. XLPE FRLS Cable RM 44 4,223 185,800.20
Supplying and making terminal joints for the following size of 1.1 KV XLPE insulated FRLS aluminium/ copper
2.3 conductor conductor armoured cables including providing heavy duty Aluminium terminal crimping lugs, RM RO -
solder, insulation tape, approved sealing epo
2.4 3.5cx185 Sq. mm. Al. Ar. XLPE FRLS Cable RM RO 2,450
2.5 3.5cx150 Sq. mm. Al. Ar. XLPE FRLS Cable RM 2 2,266 4,532.05
2.6 3.5cx120 Sq. mm. Al. Ar. XLPE FRLS Cable RM 2 1,753
2.7 3.5cx95 Sq. mm. Al. Ar. XLPE FRLS Cable RM 2 1,346 2,691.77
2.8 3.5cx70 Sq. mm. Al. Ar. XLPE FRLS Cable RM 2 1,093 2,186.09
2.9 3.5cx50 Sq. mm. Al. Ar. XLPE FRLS Cable RM 20 862 17,238.48
2.10 3.5cx35 Sq. mm. Al. Ar. XLPE FRLS Cable RM 2 707 1,414.53
2.11 3.5cx25 Sq. mm. Al. Ar. XLPE FRLS Cable RM 4 682 2,728.27
2.12 3.5cx16 Sq. mm. Al. Ar. XLPE FRLS Cable RM 4 666 2,662.23
2.13 3.5cx10 Sq. mm. Al. Ar. XLPE FRLS Cable RM RO 654
2.14 3.5cx6 Sq. mm. Al. Ar. XLPE FRLS Cable RM RO 649
2.15 3cx4 Sq. mm. Al. Ar. XLPE FRLS Cable RM RO 643
2.16 3.5cx25 sq mm Al. Ar. XLPE FRLS Cable RM 16 682
2.17 4cx16 sq mm Al. Ar. XLPE FRLS Cable RM 12 473
2.18 3.5cx10 sq mm Copper. Ar. XLPE FRLS Cable RM 2 654
2.19 3.5cx6 sq mm Copper. Ar. XLPE FRLS Cable RM 8 649 5,192.40
2.20 4cx4 sq mm Copper. Ar. XLPE FRLS Cable RM 14 643
2.21 3cx4 Sq. mm. Copper. Ar. XLPE FRLS Cable RM 8 643 5,143.74

-
-
3 FIRE SURVIVAL CABLE & CABLE TRAY - -
Supply and laying of fire Survival armoured (1000V) cable with Class-2 annealed Aluminium conductor having
Mineral ceramic glass fire barrier tape covered by an extruded layer of Low Smoke Zero Halogen (LSZH) Cross-
linkable insulation as per EI-5 OF BS EN 50363 along with ATC drain wire, aluminium tape screening and LSZH
a outer sheath as per BS 7629-1 & BS 5839-1 (latest edition). Outer sheath should be Anti Rodent/Anti Termite. -
Should retain circuit integrity as per BS 8434-2. To be clamped directly to the robust ceiling complete with
termination and testing as per requirement. BRE Global certified.
-
i 3.5CX300 SQ. MM Al. Fire Survival Cable RM RO 3,086
ii 3.5CX240 SQ. MM Al. Fire Survival Cable RM 75 2,579 193,411.54
iii 3.5CX185 SQ. MM Al. Fire Survival Cable RM 100 2,084 208,356.19
iv 3.5CX95 SQ. MM Al. Fire Survival Cable RM 105 1,143 120,061.13
v 3.5CX70 SQ. MM Al. Fire Survival Cable RM RO 993
vi 3.5CX35 SQ. MM Al. Fire Survival Cable RM RO 615
vii 3.5CX25 SQ. MM Al. Fire Survival Cable RM RO 517
viii 3CX16 SQ. MM Al. Fire Survival Cable RM RO 397
ix 3CX10 SQ. MM Al. Fire Survival Cable RM RO 356
x 3CX6 SQ. MM AL. Fire Survival Cable RM 450 321 144,276.67
xi 4CX16 SQ. MM Al. Fire Survival Cable RM RO 477
- -
Supplying and making terminal joints for the following size of Fire Survival cables including providing heavy duty
b Aluminium terminal crimping lugs, solder, insulation tape, approved sealing epoxy compound, double -
compression brass compression cable glands, effecting gland connections and effecting terminal connections to
the equipment complete as required. -
i 3.5CX300 SQ. MM Al. Fire Survival Cable RM RO 4,405
ii 3.5CX240 SQ. MM Al. Fire Survival Cable RM 2 3,341 6,681.65
iii 3.5CX185 SQ. MM Al. Fire Survival Cable RM 2 2,633 5,265.38
iv 3.5CX95 SQ. MM Al. Fire Survival Cable RM 2 1,493 2,985.45
v 3.5CX70 SQ. MM Al. Fire Survival Cable RM 2 1,238 2,476.29
vi 3.5CX35 SQ. MM Al. Fire Survival Cable RM RO 845
vii 3.5CX25 SQ. MM Al. Fire Survival Cable RM RO 819
viii 3CX16 SQ. MM Al. Fire Survival Cable RM RO 579
ix 3CX10 SQ. MM Al. Fire Survival Cable RM 8 570 4,559.86
x 3CX6 SQ. MM AL. Fire Survival Cable RM 40 500 19,984.12
xi 4CX16 SQ. MM Al. Fire Survival Cable RM RO 527
-
SUB HEAD-3 Total Amount - 2,387,722
-

ENVIRONS Page 9
(Building Services Consultants)
SUB HEAD-4 (OCCUPANCY SENSOR) -
1 Occupancy Sensors -
1.1 Supply & installation of Occupancy sensor with programming & supervision complete as required. Nos. 50 1,846 92,317.95
(Make : Honeywell / Siemens) -
-
SUB HEAD-4 Total Amount - 92,318
-
SUB HEAD-5 ( CABLE TRAY ) -
Design, manufacture , supply and fixing of factory fabricated hot dip galvanized ladder type cable tays, with
radial bends, supports and fixing hardware etc with of the following sizes as per specification. The rate shall
1 also include for suitable ready-made radial bends/reducers, necessary GI supports , supporting down rods, -
anchor fasteners etc. including cutting, drilling holes, painting etc. as required.

Note- (Up to 450 mm -consider as threaded type support & for above 450 mm -consider a GI support). The rate
shall include all accessories like , bends,elbows,tees,coupler plates,etc. -
1.1 1200 MM WIDE CABLE TRAY -
1.1.1 Runners 25 x 100 x 25 x 3 mm -
1.1.2 Rungs 20 x 40 x 20 x 3 mm 250 mm C/C -
1.1.3 3 No. Suspenders 40 x 40 x 5 mm GI angle 1500 mm C/C RM 20 2,853 57,067.70
- -
1.2 1000 MM WIDE CABLE TRAY - -
1.2.1 Runners 25 x 100 x 25 x 3 mm - -
1.2.2 Rungs 20 x 40 x 20 x 3 mm 250 mm C/C - -
1.2.3 3 No. Suspenders 40 x 40 x 5 mm GI angle 1500 mm C/C RM 50 2,645 132,242.75
- -
1.3 750MM WIDE CABLE TRAY - -
1.3.1 Runners 20 x 75 x 20 x 2.5 mm - -
1.3.2 Rungs 20 x 30 x 20 x 2.5 mm 250 mm C/C - -
1.3.3 3 No. Suspenders 32 x 32 x 4 mm GI angle 1800 mm C/C RM 100 1,557 155,702.38
- -
1.4 600MM WIDE CABLE TRAY - -
1.4.1 Runners 20 x 75 x 20 x 2.5 mm - -
1.4.2 Rungs 20 x 30 x 20 x 2.5 mm 250 mm C/C - -
1.4.3 3 No. Suspenders 32 x 32 x 4 mm GI angle 1800 mm C/C RM 100 1,414 141,365.94
- -
1.5 450 MM WIDE CABLE TRAY - -
1.5.1 Runners 20 x 75 x 20 x 2.5 mm - -
1.5.2 Rungs 20 x 30 x 20 x 2.5 mm 250 mm C/C - -
1.5.3 Suspenders 3 Nos. 25 x 25 x 4 mm GI angle 1250 mm C/C RM 100 1,251 125,117.98
Design, manufacture , supply and fixing of factory fabricatede perforated type cable trays of the following sizes
for supporting 1.1 KV grade armoured/ unarmoured aluminum / copper conductor cables. The hot dip
galvanised type will be with 2-2.5mm thick GI CRCA sheet with expansion coupler plates duly hot dip
galvanized, with bolts, washer and nuts. Knock out holes for cable connections as per approved design. The tray
2 should comply with the specification of NEC (National Electric Codes) and NEMA (National Electric - -
Manufacturers Association). The steel should be as per IS:226 and hot dip galvanizing as per IS :2629/BS
729/ASTM 123. The rate shall also include for suitable readymade radial bends/reducers, necessary GI support ,
supporting down rods, anchor fasteners etc. including cutting, drilling holes, welding, painting etc. as required.

2.1 300 MM WIDE CABLE TRAY RM 150 1,116 167,345.30

2.1 150 MM WIDE CABLE TRAY RM 926 749 693,546.34
- -
Supply and laying of the following NP2 RCC Hume pipe including excavation, refilling including compaction of
3 soil as required for cable/wires including the cost of sealing the ends as required complete -
-
3.1 150 mm dia RM 50 1,025 51,263.62
3.2 200mm dia RM 50 1,204 60,213.03
-
SUB HEAD-5 Total Amount - 1,583,865
-

ENVIRONS Page 10
(Building Services Consultants)
SUB HEAD-6 ( BUS DUCT & RISING MAIN ) -
Design, manufacture, supply, assembling, installation in correct assigned position, making proper connections,
testing and commissioning of following rating TPN Rising mains of aluminum sandwich bus ducts including all
bends, flexible, spacers, end flange units etc., as required with tap-off connection points , fire barriers including
necessary steel support and louvers for ventilation, fabricated including external 2 No. of 32x6 mm copper
earthing conductor through out the length of the rising mains (Phase sequence should be matched with the
1 incoming breaker provided at LT Panel). Thrust pad shall be provided for each rising main for necessary support -
to rising main and to prevent the bus bar expansion in downward direction. Also end cap(IP-54) to close the end
of rising main and to provide extra supports to bus bars at end shall be provided. Dimension to be furnished
with the offer. Rising Mains shall conform to IEC 61439-6

1.1 1000 Amps 36 KA TPN Aluminium Rising Mains IP-54 described as above RM 44 13,342 587,045.86
1.2 630 Amps 36 KA TPN Aluminium Rising Mains IP-54 described as above RM 56 10,755 602,276.25
1.5 Rising main reducer from 1000 Apms to 630 Amps Nos 2 11,033 22,065.95
- -
Design, manufacture, supply, assembling, installation in correct assigned position, making proper connections,
testing and commissioning of following rating of Tap off boxes made up of 16 gauge CRCA sheet steel mounted
on the rising mains including providing of following MCCB’s as required with all accessories and adequate space
2 shall be provided for cable terminations and adapter box for Ar. cable connection to Tap off box to be included.. - -
Tap off boxes shall be type tested as per IEC 61439-6 along with rising mains.

2.1 160 Amps TPN MCCB (25kA, Microprocessor based) Nos 2 30,286 60,571.00
2.2 125 Amps TPN MCCB (25kA, Thermal Magnatic based) Nos 30,683.45
2 15,342
2.2 100 Amps TPN MCCB (25kA, Thermal Magnatic based) Nos 257,805.60
18 14,323
- -
Design, manufacture, supply, assembling, installation in correct assigned position, making proper connections,
testing and commissioning of following rating End Feed Adopter Boxes fabricated out of 16 gauge CRCA sheet
steel in cubical formation, dust and vermin proof, coupled with rising mains. Boxes shall be treated with all anti
3 corrosive process before powder coating as per specifications and with all supports. External 2 No.32x6 copper - -
earthing terminals shall be provided. Boxes shall be suitable for connecting of rising mains at top and aluminum
cables at bottom.
3.1 1000 Amps 4P MP basd MCCB Nos 2 102,457 204,913.71
- -
Design, manufacture, supply, assembling, installation in correct assigned position, making proper connections,
testing and commissioning of following rating TPN Bus ducts of aluminum sandwich bus bar including all
bends,spacers, etc., as required, with suitable expansion joints and adopter box at ends. Including all necessary
4 supports, fabricated including 2 No. of 40x8 mm copper earthing conductor through out the length of the bus - -
ducts (Phase sequence should be matched with the incoming breaker provided at LT Panel). Dimension to be
furnished with the offer. Sandwich Bus duct shall conform to IEC 61439-6.
4.1 1600A TPN 36 KA sandwich bus duct IP-55 RM RO 42,920
-
4.6 Vertical bend – 1600A Nos RO 12,938
4.7 Horizontal bend – 1600A Nos RO 13,904
-
Design, manufacture, supply, assembling, installation in correct assigned position, making proper connections,
5 testing and commissioning of following rating TPN Bus ducts of aluminum sandwich bus bar including all , -
flexible, end flange units etc., as required,
5.1 End Flange units with Cu flexible – 1600A Nos. RO 52,699
5.2 End Flange units with Cu flexible – 1000A Nos. RO 32,047
-
6 Thermal Expansion Joint -
6.2 1600 A Nos. RO 47,330
6.3 3200 A Nos. RO 61,846
6.4 2500 A Nos. RO 56,972
6.2 2000 A Nos. RO 48,626
6.3 1600A Nos. RO 47,330
-
SUB HEAD-6 Total Amount - 1,765,362
-
SUB HEAD-7 ( DISTRIBUTION BOARD ) -
Supply, erection, testing and commissioning of the following sheet steel clad wall recess mounting dust and
vermin proof constructed from 16 SWG sheet steel IP 42 construction, finished with rust proof red oxide coating
and two coats of paint with hinged gasket-ted door and housing the following complete with suitably rated PVC
insulated copper bus bars with interconnections and neutral bar assembly, earthing terminals, and with -
complete supports as approved by Architects. Padlocking facility shall be provided on the door as per the details
provided below.NOTE- all UPS DBs MCBs shall be D curve ,please refer the SLD for the same.

1 8 way TPN -
1-63 amp TPN 10 kA MCB with thermal magnetic protective releases incoming with 3 nos. single phase banks
1.1 each comprising of 1-63 amp DP 30 mA ELCB Sub incoming and 24 nos 6/10/16/20 amps SP 10 kA MCBs with Nos 7 27,175 190,224.51
thermal magnetic protective releases out goings per phases.
2 18 way SPN - -
1 no. 40amp mcb and 1-40 amp DP 30 mA ELCB 10 kA MCB incoming with 18 nos 6/10/16 amps SP 10 kA MCBs
2.1 with thermal magnetic protective releases out goings Nos 4 8,359 33,434.30

3 16 Way SPN - -
1 no. 40amp mcb and 1-40 amp DP 30 mA ELCB 10 kA MCB incoming with 16 nos 6/10/16 amps SP 10 kA MCBs
3.1 with thermal magnetic protective releases out goings Nos 11 7,733 85,062.85

4 12 Way SPN - -
1 no. 40amp mcb and 1-40amp DP 30 mA ELCB 10 kA MCB incoming with 12 nos 6/10/16 amps SP 10 kA MCBs
4.1 with thermal magnetic protective releases out goings Nos 0 6,777 -

5 8 Way SPN - -
1 no. 40amp mcb and 1-40amp DP 30 mA ELCB 10 kA MCB incoming with 8 nos 6/10/16 amps SP 10 kA MCBs
5.1 with thermal magnetic protective releases out goings Nos 11 5,613 61,742.25

6 6 Way SPN - -
1 no. 40amp mcb and 1-40amp DP 30 mA ELCB 10 kA MCB incoming with 6 nos 6/10/16 amps SP 10 kA MCBs
6.1 with thermal magnetic protective releases out goings Nos 2 5,057 10,113.70

-
SUB HEAD-7 Total Amount - 380,578
-

ENVIRONS Page 11
(Building Services Consultants)
 -
SUB HEAD-8 ( LIGHT FIXTURE ) -
Supply , installation , testing & commissioning LED lamps, (Suitable for installation in T-5/T-8 fitting) including
1 supply & installation of base fitting with all acessories driver, holder etc. as required. -

1.1 1x40W LED FIXTUREWALL MOUNTED Nos. 120 991 118,862.08

1.2 1x18 W LED FIXTURE Nos. 520 918 477,116.57
1.3 2x16 W LED light Fixture Nos. 20 918 18,350.64
1.4 1x16 W LED light Fixture Nos. 30 798 23,928.81
1.4 1x15 W LED light Fixture Nos. 20 798 15,952.54
1.5 Mirror Light Model Nos 25 188 4,691.92
1.6 10W BHULK HEAD LIGHT Nos 75 886 66,468.93
- -
2 External Lighting Panel - -
1-63 amp TPN 10 kA MCB with thermal magnetic protective releases incoming with 3 single phase banks each
comprising of 1-63 amp DP 100 mA ELCB Sub incoming and 12 nos 16/20 amps DP 10 kA MCB with thermal
magnetic protective releases out goings per phases. The panel shall be with RYB, ON/OFF indications, Nos 1 59,766 59,766.43
Auto/manual with Timer based, ammeter, voltmeter and Kwhr, with all necessary requirements etc.

- -
Supply, laying, testing and commissioning of following size PVC insulated copper conductor 1100 V grade
3 armored cable including excavation of earth, sand/brick protection refilling, watering & ramming complete. - -

- -
3.1 3 C x 4 Sq. mm. (Red, Black & Green) Rmt 200 165 33,017.24
- -
3.2 3 C x 4 Sq. mm. (Yellow, Black & Green) Rmt 200 165 33,017.24
- -
3.3 3 C x 4 Sq. mm. (Blue, Black & Green) Rmt 200 165 33,017.24
- -
3.4 3 C x 6 Sq. mm. (Red, Black & Green) Rmt 200 230 46,050.37
- -
3.5 3 C x 6 Sq. mm. (Yellow, Black & Green) Rmt 200 230 46,050.37
- -
3.6 3 C x 6 Sq. mm. (Blue, Black & Green) Rmt 200 230 46,050.37
- -
Making end termination & jointing of following size PVC insulated copper conductor 1100 V grade armored
4 cable including cost of crimping lugs, sockets, insulation tapes, double compression glands etc. complete. - -

4.1 3C x 4 Sq. mm. Nos 40 643 25,718.70

4.2 3C x 6 Sq. mm. Nos 40 649 25,961.98
- -
Supply and laying RCC Hume pipe (NP-2 class) under road crossing, paved area etc. With connecting collars etc.
5 including excavation, refilling, ramming and making good as approved complete. - -

5.1 150 mm dia Rmt 100 1,260 125,986.86

5.2 100 mm dia Rmt 1,043 -
- -
Receiving, storing, handling, installation, testing and commissioning of the following lighting fixtures or
6 approved equivalent complete with all accessories. -
-
6.1 Flood lighting fixture with 70 watts Metal Halide lamp including ballast capacitor complete with all accessories Nos RO 261
6.2 as required.
Post top lantern with spherical cover Philips:SPC106 1xSON-1-70W E lamp or equivalent complete with all Nos RO 261
6.3 accessories as required.
Uplight, recessed in Ground with adjustability, suitable for 8 watt LED based lamp. Nos RO 217
6.4 Uplight, recessed in Ground with adjustable light distribution, suitable for 8 watt LED based lamp. Nos RO 217
6.5 Outdoor Type Bollard lights mounted on Ground with fixed light didtribution, suitable for 10 watts LED Based Nos RO 261
6.6 Lamp.
Outdoor Type Pathway Pole mounted with fixed light didtribution, suitable for 39 watts LED Based Lamp. Nos RO 261
6.7 Outdoor Type Bollard mounted with fixed light didtribution, suitable for 15 watts LED Based Lamp. Nos RO 261
Linear light(2.8 watt/mts LED) floor mounted recessed with fixed light distribution suitable for LED based Nos
6.8 lamp(For highlighting the wall at the entrance) RO 261
6.9 Installation, testing and commissioning of Gate lights as per Lightinging Designer. Nos RO 261
6.10 Installation, testing and commissioning of Spike lights as per lighting designer. Nos RO 174
6.11 Installation, testing and commissioning of Wall washer lights as per lighting designer. Nos RO 217
6.12 Installation, testing and commissioning of LED Strip Lights. Rmt RO 87
-
Wiring for the MCB controlled Primary Above light points with 2.5 sq.mm PVC insulated copper conductor Nos
7 1100 volts grade stranded flexible FRLS wires of approved make in concealed or surface mounted 25 mm dia 2.0 RO
mm thick PVC conduit but controlled by existing MCB provided in D.B. including earthing of fixtures with 2.5
sq.mm insulated copper wire.(For Pole Only) 6,191
Wiring for the MCB controlled Secondary light points with 1.5 sq.mm PVC insulated copper conductor 1100 Nos
8 volts grade stranded flexible FRLS wires of approved make in concealed or surface mounted 25 mm dia 2.0 mm RO
thick PVC conduit including earthing of fixtures with 1.5 sq.mm insulated copper wire(For Pole Only).
1,368
-
9.0 Poles -
Installation, testing and commissioning of 6 meter high MS decorative poles including foundation work (as per
9.1 lighting designer) without ladder bars including, Junction Box complete as per requirement with all accessories. Nos RO 5,648
Installation, testing and commissioning of 4.5 meter high Decorative MS pole including foundation work (3.6
9.2 meter above and 0.9 meter below ground with ladder bars including chatsworth kit, junction box complete as Nos RO 4,996
per requirement
Installation of MSwith all accessories.
cascade brackets along with all accessories as per suitable for fixing light fixture with 70 watt
9.3 Nos RO 565
MH lamp.
Providing, installation of 200 x 150 x 125 mm polycarbonate weather proof (IP-55) junction box and SP MCB’s
10.0 and terminal block. Supplying and laying cable through GI pipe upto junction box including excavation and back Nos RO 2,824
filling, wiring with 2 x 2.5 sq.mm PVC insulated 1100 volts grade copper conductor wires from junction box to
lighting fixture complete.
-
SUB HEAD-8 Total Amount - 1,200,008
-
SUB HEAD 9 (UPS) -
1 Supply, installation, Testing and commissioning of the following UPS SYSTEM as per specifications and complete -
in all respects.
Three phase In (415 Volts Input Range) and Three phase output, 10 kVA non modular type UPS in parallel
configuration , 90 minute battery backup- including UPS & battery racks, paralleling kits, suitable for Liner and
Non-linear load (N+1) operation. The UPS Unit shall be Double Conversion and comprise Rectifier, Inverter,
Neutral isolation transformer,Static by-pass switch, and provision for Manual by-pass. The input power factor
shall be in the range of 0.94 or above,and the Overall efficiency of the unit shall not be less than 94 %, while
-
delivering quality power (Total Harmonic Distortion Less Than 3 %) to 100 % non-linear loads. The Unit shall be
complete with Power Management Software and Advanced Battery Management System suitable for three
stage charging methodology, together with LCD Display for all UPS & Battery parameters.

1.1 15 KVA (Common Area Lighting) Nos. 1 355,196 355,196.04

1.2 20 KVA Nos. RO 385,919
1.3 30 KVA Nos. RO 501,132
1.4 40 KVA( power supply (BOH & FOH) Nos. RO 556,080
INCOMING -
1 Nos. 63A, 415V, 4P MCB 10 KA -
1 set of RYB & ON OFF TRIP indication lamp -
1 nos. cast resin current transformers of 63/5A ratio with 5 VA Burden & Class 1.0 with Multifunction meter -
-
BUSBAR -
Electrolytic high conductivity aluminium three phase and neutral busbars rated at 100 amps having a maximum
current density of 1 amp per sq mm suitable to with stand symmetrical at 415 V. The neutral busbar is to be of -
same size as phases.
-
OUTGOING -

2 Nos. 40 A DP MCB 10 KA (D CURVE MCB) -

13 Nos. 25 A DP MCB 10 KA (D CURVE MCB) No. 1 62,993 62,993.43

-
SUB HEAD-9 Total Amount - 418,189
-

ENVIRONS Page 12
(Building Services Consultants)
SUB HEAD 10 ( FIRE SEALENT ) -
Providing Fire stop mortar system Hilti CP 636 , with minimum 2 hours fire rating when tested in accordance
with UL 1479 standards, for horizontal openings in floors or slabs after passing service lines like Cable trays, Bus
Bars or Metal pipes. The mortar shall be a light weight cementitious product and shall carry test certificate in
accordance with IEC 60068-2-57:1999-11 (Environmental Testing) as per Part 2-57: Test for Vibration-Time-
history method and VERTEQII for seismic zone 4. Expanding firestop foam Hilti CP 620, with minimum 2 hours
fire rating when tested in accordance with UL 1479 standards, shall be used to seal areas that are highly dense
1 or are not accessible and cannot be sealed with fire stop mortar properly. The expanding foam shall expand Sq. M 5 14,336 71,682.18
minimum seven times its volume to fill the cavity at the time of dispensing the material and shall fully cure
within two minutes after dispensing. The expanding foam shall also be repenetratable. The products shall be
age tested as per Dafstb and DIBT standards. The products shall carry test certificate for mold resistance rating
of 0 as determined by ASTM G21-96. The products shall be UL listed & classified and shall bear the UL approval
logo on the packing. Firestop installation should be done by Hilti trained applicators and in accordance with Hilti
guidelines.
-
SUB HEAD-10Total Amount - 71,682
-
SUB HEAD 11 ( MISC. ITEMS ) -
Fixing test link boxes as per specification & drawing and grouted to wall at 1200 mm above ground level
1 complete with all fixing accessories , clamps, screws etc. Nos. 5 434 2,172.19

Supply, fabrication ,Eraction of steel items including 2 coats of zinc chromate followed by 2 coats of finishing
2 paint of channels, suspension supports,steel plate , anchor plate , anchor bolts, cross angles, brackets etc. KG 100 126 12,598.69
including grouting , welding . The payment shall be made for the actual quantities used.
Supply & installation of FRP supporting insulator with suitable size of brass coated bolts & nuts & suitable size of
3 grip bolts complete. Nos. 30 1,043 31,279.50

-
SUB HEAD-11 Total Amount - 46,050
-
SUB HEAD-12 (EARTHING) -
-
Pipe Earth Electrode using 40mm dia class B GI pipe complete as per IS 3043 with salt, charcoal, brick masonary
1 chamber with heavy duty RCC cover ( suitable to take fire tender load) tender truck movement) of 450mm x Nos 32 14,336 458,765.93
450mm x 300mm chamber.(Earth strip to be left upto the Earthpit for Connection).
- -
Plate Earth Electrode using 19 mm dia Class B GI plate of size 600 x 600 x 6 mm thick.with heavy duty RCC
2 cover ( suitable to take fire tender truck load) of 450mm x 450mm x 300mm chamber.(Earth strip to be left upto Nos 1 22,156 22,156.31
the Earthpit for Connection)
- -
Plate Earth Electrode using 19 mm dia 5mm thick copper plate of size 600 x 600 x 6 mm thick.with heavy duty
3 RCC cover ( suitable to take fire tender truck load) of 450mm x 450mm x 300mm chamber.(Earth strip to be left Nos RO 22,156
upto the Earthpit for Connection)
Supply and laying, Testing and commissioning of copper/GI Strips/wire for interconnecting the earthing
stations ,panels,of the following sizes in built up trenches /surface/wall/ground complete with holes &
4 fixing,jointing / terminating accessories as per specifications & drawing as required. (Quantity shall be paid as - -
per the actual measurement as executed, however direct measurement shall not excced the quantity indicated
in drawing approved.
4.1 For Body Earthing - -
4.1.1 75 mm x 5 mm GI strip RM 60 281 16,886.25
4.1.2 50 mm x 6 mm GI strip RM 40 225 9,006.00
4.1.3 50 mm x 4 mm GI strip RM 280 149 41,751.50
4.1.4 25 mm x 5 mm GI strip RM 100 93 9,282.50
4.1.5 25 mm x 4 mm GI strip RM 50 75 3,752.50
4.1.6 25 mm x 3 mm GI strip RM 135 55 7,465.50
4.1.7 G.I.Wire 6 SWG RM 600 25 14,812.50
4.1.8 G.I.Wire 8 SWG RM 400 13 5,213.25

4.2 NETURAL EARTHING - -

- -
4.2.1 75 mm x 5 mm CU strip RM 50 3,034 151,680.00
4.2.2 50 mm x 6 mm CU strip RM 50 2,435 121,758.75
4.2.3 50 mm x 4 mm CU strip RM 30 1,637 49,118.25
4.2.4 25 mm x 5 mm CU strip RM 30 1,040 31,195.13
4.2.5 25 mm x 4 mm CU strip 30 840 25,210.88
4.2.6 25 mm x 3 mm CU strip RM 30 641 19,226.63

providing and fixing of mat coppr mat earthing as per the drawing (1.2mX1.2M).Necessary chemical to Lot RO
4.3 1,360
be provided for mat earthing to achieve the required earth value.
-
SUB HEAD-12 Total Amount - 987,282
Exclusion- -
1- Light fixtures of Rooms and common area and BOH area. -
2 BOH area electrical works . -
-
SUB HEAD-13 EARTHING INSTALLATION -
-
EARTHING INSTALLATION -
-
1 Rates shall also include the following : -
-
a. All fixing accessories such as brass saddles, brass screws rawl plugs etc. -
-
b. Jointing by rivetting and brazing after rivetting in case of copper and welding / bolting in case of GI earthing. -
-
c. Cutting chases holes and making good the same wherever required. -
-
d. Effecting adequate and proper interconnections. -
-
e. Use of copper thimbles. -
-
f. Earthing system shall comply to IS:3043-1987. -
-
g. All earthing pits shall be interconnected. -
-
h. All equipment motors, panels to be connected on either ends (double earthing) with suitable strip / wires. -
EARTHING INSTALLATION -
-
Supply, installation, Testing & Commissioning, fixing of following bare GI strips / wires including all necessary
1 -
fixing accessories and effecting connections as per specifications.
-
1.1 50 x 3 mm thick GI tape. -
Supply& Installation RM 50 113 5,647.69
- -
1.2 25 x 3 mm thick Cu. tape. - -
Supply& Installation RM 50 56 2,823.84
- -
Providing, laying, testing and commissioning of 600 x 600 x 3.15 mm thick tined copper electrode, with 2 Nos 25
x 3 mm copper strips from earth electrode to inspection chamber, 50 mm dia medium class GI pipe, CI funnel
with 20 gauge GI wire mesh, masonry chamber 450 x 450 mm with concrete base CI/ heavy duty chequered
2 - -
plate manhole cover with frame painted with bitumastic paint and packing with mixtures of charcoal and common
salt around plate electrode including digging of pit upto permanent moisture level and as per soil condition but
not less than 3 meters and back filling as required. 4 No for DG Set Neutral)
Supply& Installation No. 4 22,156 88,625.24
- -
Providing, laying, testing and commissioning of 600 x 600 x 6.3 mm thick GI electrode, with 2 NO. 50X 3 mm GI
strips from earth electrode to inspection chamber, 50 mm dia medium class GI pipe, CI funnel with 20 gauge GI
wire mesh, masonry chamber 450 x 450 mm with concrete base CI / heavy duty chequered plate manhole cover
3 - -
with fram painted with bitumastic paint and packing with mixtures of charcoal and common salt around plate
electrode including digging of pit upto permanent moisture level but not less than 3 meters and back filling as
required.( 4No For Body DG set )
Supply& Installation No. 4 14,336 57,345.74
- -
Supply, laying, testing and commissioning of GI pipe under road / paved area crossing etc. including excavation
4 - -
back filling ramming and making good.

ENVIRONS Page 13
(Building Services Consultants)
4.1 50 mm dia pipe. - -
Supply& Installation RM 35 499 17,454.06
- -
4.2 100 mm dia pipe. - -
Supply& Installation RM 50 928 46,412.50
- -
TOTAL CARRIED TO SUMMARY -

218,309

ENVIRONS Page 14
(Building Services Consultants)
Project Name: Proposed Hotel Building For Krishna Group@ Velachery
Name of Work:
Electrical Panels
BOQ
SL NO.

1
Name: Proposed Hotel Building For Krishna Group@ Velachery

DESCRIPTION

TYPICAL GUEST ROOM ( as per attached light & power layout )

1 Phase, 230v. Wiring of rooms as
shown in the drawing Complete with
the Following Details:-
Please refer Drawing No.
(a) All wiring from including DB to Room Switch board to Switch Sockets,
Lights, Airconditioning Points Laptop and battery Charger etc.
(b) wiring for 6A switch- Sockets & Supply, installation of the 6A switch -Sockets. 6 Nos.(Anchor Roma - with black
color jet black metallic plate (Allura))Client Supply after mock up room appoval
(c) wiring for 6/16A switch- Sockets & Supply, installation of the 6/16A -Sockets. 1 Nos. for Fridge (Anchor Roma -
with black color jet black metallic plate (Allura))Client Supply after mock up room appoval

(d) only Supply & installation for the Tv outlet

(e)only Supply & Installation RJ11 telephone Outlet.
(f) Installation of 3.3W LED downlight 6 Nos. (3.3 W WARM WHITE LED DOWN LIGHT), Installation of Bed side
Lamp with inbuilt switch 2 nos (BED SIDE LAMP & READING LIGHT WITH IN BUILT SWITCH ), Installation of 11w
Night lamp 1 nos. (NIGHT LIGHT 11W), installation of D shape mirror light 1 Nos, Installation of LED strip (LED
LIGHT) & Installation of Bracket Light (1.1W WARM WHITE LIGHT).

(g) Supply & Installation of 2x 2.5 sqmm+ 1x1.5 sqmm wiring for all lightpoint.
(h) Supply & Installation of Key Tag 20A (make: Cabtree sensor type) ( NOTE: Only all light point wiring shall be
operated from Key Tag or Main power switch all lighting
(i) Supply & Installation of 3 nos. one way switches with wiring for light points.
(j) Supply & Installation of Two way 2 Nos. switch with wiring for Main Room Lights near entrance door and right
side of Bed
(k) Supply & Installation of Two way switch with wiring for Toilet light near enterance door of toilet and Left side
of Bed
(l) Supply & Installation of door Bell with wiring of 2x 2.5 sqmm+ 1x1.5 sqmm
(m) Supply & Installation Hard wiring for KETTEL point and HAIR DRYER
(n) Installation of connectivity panel
(o) Supply & Installation of 32 mm PVC conduit from connectivity panel to TV
(p) Laying only of HDM / USB I cable from connectivity panel to TV
(q) DB with breaker and RCC 30mamp
NOTE:-
All light fixtures, shall be supplied by the clients. Only installation is considered in the tender
all switchboards shall be installed without conceal BOX only wall side room consider Concealed box.connectivity
panel shall be supplied by client.
Above line item may be change as per mock up rate should be same
TOTAL
 RRP

UNIT QTY Rate Amount

Nos 108 46061.9 4,974,685

4,974,685
Name
ProjectofName: Proposed Hotel Building For Krishna Group@ Velachery
Work:
Electrical RRP
Panels
BOQ
SL NO. DESCRIPTION UNIT QTY Rate Amount

Supply, installation, testing and commissioning of following M.V. cubicle type totally enclosed, free
standing type, dust, damp and vermin proof. Distribution Board/Panel complete with busbars, M.V.
danger notice plate, connection of incoming and outgoing cables with thimbles, with complete -
fixing accessories as required. The rates for the distribution boards apart from the Breakers and
instruments shall also include the following:

This schedule of Quantities shall be read in conjuction with the technical specification, General &
-
Special conditions as well as all tender drawings.

Main LT Panel shall be confirm to IEC-61439 and other panels shall be confirm to IEC- 60439 -

Panel manufacturer should be ISO 9001 certified having CPRI (Central power research institute)/
ERDA(Electrical research development authority) test report for Short circuit withstand of -
minimum 50KA rms for 1 second and Temperature rise test.
-
Supporting rigid steel framework. -
-
Cubicle type, 14 gauge CRCA sheet steel enclosed. -
-
Complete with interconnections and distribution bus bars. -
-
Proper bonding to earth. -
-
Painting/lettering on Breakers and distribution boards, the location they serve, providing on each
-
panel its circuit diagram.
-
Providing cable clamps / supports within distribution boards cable alley. -
-

TPN ACB’s / MCCB’s shall mean 3 pole ACB’s / MCCB’s with adequate size of neutral link .All 4
-
Pole ACBs should have 100% neutral rating

All ACBs should have Ics=Icu=Icw for 1 sec for the fault level specified in BOQ. Manufacturer shall
-
submit test certificate for "Combined Sequence" as per IS/IEC60947 standards

All ACBs except bus couplers should be provided with microprocessor based protection release
having inbuilt adjustable protections for O/L, S/C & Earth Faults with LED display for Current -
metering, % Loading and Last 5 trip data and RS-485 communication port.
Transformer and DG set ACBs shall be provided with RS 485 port for communication on
-
BMS/SCADA.

Door Interlock and Mechanical operation counter to be provided for all ACBs -

External Neutral CT shall be provided for all 3 Pole ACBs & MCCBs with microprocessor based
-
release (with inbuilt Earth Fault protection) to avoid nusiance tripping due to unbalanced loads.

All MCCBs should have Ics=100% of Icu -

MCCBs upto 200A should be Thermal Magnetic type having O/L & S/C protections. All MCCBs above
-
200A shall have microprocessor release with adjustable O/L, S/C & inbuilt E/F protections.

MCCBs above 63A ratings should be provided with Copper Spreader Links & Phase barriers -

3 Pole power contactors should be AC3 duty for motor switching and AC1 for other resistive /
-
Lighting loads. 4 Pole contactors should be AC1 duty unless otherwise specified
-
All MCB’s shall be of minimum 10 KA breaking capacity or as required. -
-
All motor feeders MCCBs / MPCBs shall be of motor duty.selected as per Type II coordination chart
-
of manufacturer
-
Distribution panels shall be Powder Coated with Siemens gray paint shade no. RAL-7032 of IS-
-
5.with 60-80 micron thickness.
-
Degree of protection for following type of distribution panel enclosure shall be as per IS:13947-
-
1993.
-
IP 52 for indoor panels. -
IP 55 for outdoor panels. -
-
All MCCB’s shall be provided with operating mechanism for door interlock. -
-
Current density of aluminium busbars shall be 1 A/sq mm and current density of copper shall be
-
1.6A/sq.mm
-
Tinned copper / GI earth bus as specified in the BOQ shall be provided through out the length of
-
each board.
-
All measuring instruments (Meters) shall be of digital electronic with LED of approved make and
-
compatible with BAS.
-
All hinged door shall be earthed through 2.5 sq mm tinned braided copper wire. -
-
All panels shall have provision of the following: -
-
Pad locking of Switch board doors. -
-
Pad locking of MCCB’s handles in “OFF” Position. -
-
2NO + 2NC potential free contacts, connectors, contactors with wiring etc are to be provided for
BAS including space required for various transducers in all incomers sections. Only transducers -
shall be supplied by BAS contractor.
-
All MCB’s used for protection of resistive and lightly inductive load shall be type “B” characteristic
and inductive (motor) load shall be of type “C” characteristic and discharge lamps and UPS etc. shall -
be of type D characteristic.
-
All incoming and outgoing air circuit breakers shall be placed on middle portion of the vertical in
-
single tier formation.
-

All PTs / control transformer shall be provided with center tap earth secondary. -

Multifunction meter parameter shall be – Voltage , current, Power factor, Frequency , active
Power, reactive power & apperant power, Maximum demand indicator , unbalance voltage , -
unbalance current , RS485 port , % loading harmonics.

All ATS shall be 4Pole. -

This BOQ to be read with respect to SLD , in the event of any discerepency in the BOQ SLD &
-
Technical Specification details to be considered.
All ACBs shall be microprocessor based with LED display % loading last 5 trip data & RS-485
-
communication port.
-

1 MAIN LT PANEL-1 INDOOR RATED (36 KA ,IP-42) All test certificates for IEC-61439 shall be
-
provied.
A BUS SECTION-1 -

DG INCOMING-1 -

1 No. 1250 A, 415V, 4P EDO ACB 50 KA with microprocessor based release having following
inbuilt adjustable protections for Over Load, Short Circuit with time delay, Instantaneous S/C and -
Earth Fault along with with AUX.+ trip cont. & RS 485 communication port LED display for Current
metering, % Loading and Last 5 trip data.
ON / OFF/ TRIP indicating lights with 2A MCB . - 1 Set. -
Phase indicating light shall be protected by 2A MCB. - 1 Set
-

1 set cast resin current transformers of 1250/5A ratio with 15 VA Burden & Class 1.0 with Digital
-
Multi Function Meter(MFM) with 485 communication port with HRC Fuse.
1No. Relay for line voltage monitor with in built under/over voltage protection, single phase
-
&unblace protection , measuring voltage 415 AC with contacts.
1 No. Surge protection Type 1+2 (63 A TP+NL MPCB) -

ENVIRONS
Page 20
(Building Services Consultants)
 B BUS SECTION-1 -

DG INCOMING-2 -

1 No. 800 A, 415V, 4P EDO ACB 50 KA with microprocessor based release having following inbuilt
adjustable protections for Over Load, Short Circuit with time delay, Instantaneous S/C and Earth -
Fault along with with AUX.+ trip cont. & RS 485 communication port LED display for Current
metering, % Loading and Last 5 trip data.

ON / OFF/ TRIP indicating lights with 2A MCB . - 1 Set. -

Phase indicating light shall be protected by 2A MCB. - 1 Set
-

1 set cast resin current transformers of 800/5A ratio with 15 VA Burden & Class 1.0 with Digital
-
Multi Function Meter(MFM) with 485 communication port with HRC Fuse.

1No. Relay for line voltage monitor with in built under/over voltage protection, single phase
-
&unblace protection , measuring voltage 415 AC with contacts.
1 No. Surge protection Type 1+2 (63 A TP+NL MPCB) -

TRANSFORMER INCOMING-1 -

1 No. 1600 A, 415V, 4P EDO ACB 50 KA with microprocessor based release having following
inbuilt adjustable protections for Over Load, Short Circuit with time delay, Instantaneous S/C and -
Earth Fault along with with AUX.+ trip cont. & RS 485 communication port LED display for Current
metering, % Loading and Last 5 trip data.

ON / OFF/ TRIP indicating lights with 2A MCB . - 1Set. -

Phase indicating light shall be protected by 2A MCB. - 1 Set
-

1 set cast resin current transformers of 1600/5A ratio with 15 VA Burden & Class 1.0 with Digital
-
Multi Function Meter(MFM) with 485 communication port with HRC Fuse.
1No. Relay for line voltage monitor with in built under/over voltage protection, single phase
-
&unblace protection , measuring voltage 415 AC with contacts.

1 No. Surge protection Type 1+2 (63 A TP+NL MPCB) -

1 No. Demand controller. -

BUSBAR -

Electrolytic high conductivity aluminium three phase and neutral busbars rated at 2000 amps
having a maximum current density of 1 amp per sq mm suitable to with stand symmetrical fault -
level of 36 kA at 415 V. The neutral busbar is to be of same size as phases.

OUTGOING -

2 Nos.1000 A, 50 KA TPN TPN EDO ACB with on , off, Trip indication &3 set cast resin current
transformers of 1000/5A ratio with 15 VA Burden & Class 1.0 with Digital Multi Function -
Meter(MFM) with 485 communication port with 2A MCB etc. .

2 Nos.800A, 36 KA TPN Microprocesser Relese MCCB WITH Adjustable O/L, S/C & Inbuilt E/F
Protections WITH ON , OFF, TRIP Indication and 2 set cast resin current transformers of 800/5A
-
ratio with 10 VA Burden & Class 1.0 with Digital Multi Function Meter(MFM) with 485
communication port and with 2A MCB etc.

1 Nos.800A, 36 KA TPN Microprocesser Relese MCCB WITH Adjustable O/L, S/C & Inbuilt E/F
Protections WITH ON , OFF, TRIP Indication and 2 set cast resin current transformers of 800/5A -
ratio with 10 VA Burden & Class 1.0.

3 Nos.250A, 36 KA TPN Microprocesser Relese MCCB WITH Adjustable O/L, S/C & Inbuilt E/F
Protections WITH ON , OFF, TRIP Indication and 3 set cast resin current transformers of 250/5A
-
ratio with 7.5 VA Burden & Class 1.0 with Digital Multi Function Meter(MFM) with 485
communication port and with 2A MCB etc.

1 No.200A, 36 KA TPN Thermal Magnetic Relese MCCB WITH Adjustable O/L, S/C & Inbuilt E/F
Protections WITH ON , OFF, TRIP Indication and 2 set cast resin current transformers of 200/5A
-
ratio with 7.5 VA Burden & Class 1.0 with Digital Multi Function Meter(MFM) with 485
communication port and with 2A MCB etc.

1 No.160A, 36 KA TPN Thermal Magnetic Relese MCCB WITH Adjustable O/L, S/C & Inbuilt E/F
Protections WITH ON , OFF, TRIP Indication and 2 set cast resin current transformers of 160/5A
-
ratio with 7.5 VA Burden & Class 1.0 with Digital Multi Function Meter(MFM) with 485
communication port and with 2A MCB etc.

1 No.125A, 36 KA TPN Thermal Magnetic Relese MCCB WITH Adjustable O/L, S/C & Inbuilt E/F
Protections WITH ON , OFF, TRIP Indication and 2 set cast resin current transformers of 125/5A
-
ratio with 7.5 VA Burden & Class 1.0 with Digital Multi Function Meter(MFM) with 485
communication port and with 2A MCB etc.

1 No.100A, 36 KA TPN Thermal Magnetic Relese MCCB WITH Adjustable O/L, S/C & Inbuilt E/F
Protections WITH ON , OFF, TRIP Indication and 2 set cast resin current transformers of 100/5A
ratio with 7.5 VA Burden & Class 1.0 with Digital Multi Function Meter(MFM) with 485 Set 1 1,749,081.90 1,749,081.90
communication port and with 2A MCB etc.

- -
2 (Ground floor Panel) INDOOR RATED (20 KA ,IP-42) - -
i INCOMING - -

2 Nos.160A, 20KA 4P Thermal magnetic Relese MCCB WITH Adjustable O/L, S/C &E/F protections . - -

2 No. 160 Amps 4P AC3 duty contactor with following accessories,

• ON/ OFF push button,
• Auto/ Manual Switch, - -
• Delay timer
• electrically/ mechanically interlocking
Metering & Indication - -
2No.multifunction meter for measuring following electrical parameters, 2 No. 160/5 amps 5VA CTs,
Cl -1 • Current WITH RS-485. - -

Phase indicating light shall be protected by 2 Amps SP MCB's. - 2 Set - -

ON / OFF/ TRIP indicating lights with control 2 Amps SP MCB's. - 2 Set - -
Numeric Relay as per Local regulation - 2 Set - -
Surge Protection-2Set - -

ENVIRONS
Page 21
(Building Services Consultants)
 - -
ii BUSBAR - -

Electrolytic high conductivity aluminium three phase and neutral busbars rated at 200 amps having
a maximum current density of 1 amp per sq mm suitable to with stand symmetrical fault level of 20 - -
kA at 415 V. The neutral busbar is to be of same size as phases.

iii OUTGOING - -
2No.100A, 20 KA TPN MCCB - -
3 No.63A, 20 KA TPN MCCB - -
1 No. MPCB suitable for 5.5kW motor with star delta starter & isolator near the fan. - -
1 No. MPCB suitable for 3.7KW motor with DOL starter & isolator near the fan. No. 1 227,174.38 227,174.38
- -
3 (First floor Panel) INDOOR RATED (20 KA ,IP-42) - -
i INCOMING - -
2 Nos.160A, 20KA 4P Thermal magnetic Relese MCCB WITH Adjustable O/L, S/C &E/F protections . - -

2 No. 160 Amps 4P AC3 duty contactor with following accessories,

• ON/ OFF push button,
• Auto/ Manual Switch, - -
• Delay timer
• electrically/ mechanically interlocking
Metering & Indication - -
2No.multifunction meter for measuring following electrical parameters, 2 No. 160/5 amps 5VA CTs,
Cl -1 • Current WITH RS-485. - -

Phase indicating light shall be protected by 2 Amps SP MCB's. - 2 Set - -

ON / OFF/ TRIP indicating lights with control 2 Amps SP MCB's. - 2 Set - -
Numeric Relay as per Local regulation - 2 Set - -
Surge Protection-2Set - -
- -
ii BUSBAR - -

Electrolytic high conductivity aluminium three phase and neutral busbars rated at 200 amps having
a maximum current density of 1 amp per sq mm suitable to with stand symmetrical fault level of 20 - -
kA at 415 V. The neutral busbar is to be of same size as phases.

iii OUTGOING - -
2No.100A, 20 KA TPN MCCB - -
3 No.63A, 20 KA TPN MCCB - -
1 No. MPCB suitable for 5.5kW motor with star delta starter & isolator near the fan. - -
1 No. MPCB suitable for 3.7KW motor with DOL starter & isolator near the fan. No. 1 227,174.38 227,174.38
- -
4 (2nd to 7th floor Panel) INDOOR RATED (15 KA ,IP-42) - -
i INCOMING - -
2 Nos.100A, 15 KA 4P Thermal magnetic Relese MCCB WITH Adjustable O/L, S/C &E/F protections . - -

2 No. 100 Amps 4P AC3 duty contactor with following accessories,

• ON/ OFF push button,
• Auto/ Manual Switch, - -
• Delay timer
• electrically/ mechanically interlocking
Metering & Indication - -
2No.multifunction meter for measuring following electrical parameters, 2 No. 100/5 amps 5VA CTs,
Cl -1 • Current WITH RS-485. - -

Phase indicating light shall be protected by 2 Amps SP MCB's. - 2 Set - -

ON / OFF/ TRIP indicating lights with control 2 Amps SP MCB's. - 2 Set - -
Numeric Relay as per Local regulation - 2 Set - -
Surge Protection-2Set - -
- -
ii BUSBAR - -

Electrolytic high conductivity aluminium three phase and neutral busbars rated at 125 amps having
a maximum current density of 1 amp per sq mm suitable to with stand symmetrical fault level of 15 - -
kA at 415 V. The neutral busbar is to be of same size as phases.

iii OUTGOING - -
19No.32A, 20 KA DP MCB - -
2 No. MPCB suitable for 1.1KW motor with DOL starter & isolator near the fan. No. 6 311,845.59 1,871,073.53
- -
5 (8th floor Panel) INDOOR RATED (15 KA ,IP-42) - -
i INCOMING - -
2 Nos.100A, 20KA 4P Thermal magnetic Relese MCCB WITH Adjustable O/L, S/C &E/F protections . - -

2 No. 100 Amps 4P AC3 duty contactor with following accessories,

• ON/ OFF push button,
• Auto/ Manual Switch, - -
• Delay timer
• electrically/ mechanically interlocking
Metering & Indication - -
2No.multifunction meter for measuring following electrical parameters, 2 No. 100/5 amps 5VA CTs,
Cl -1 • Current WITH RS-485. - -

Phase indicating light shall be protected by 2 Amps SP MCB's. - 2 Set - -

ON / OFF/ TRIP indicating lights with control 2 Amps SP MCB's. - 2 Set - -
Numeric Relay as per Local regulation - 2 Set - -
Surge Protection-2Set - -
- -
ii BUSBAR - -

Electrolytic high conductivity aluminium three phase and neutral busbars rated at 125 amps having
a maximum current density of 1 amp per sq mm suitable to with stand symmetrical fault level of 15 - -
kA at 415 V. The neutral busbar is to be of same size as phases.

iii OUTGOING - -
16No.32A, 20 KA DP MCB - -
2No.63A, 20 KA TPN MCB - -
2 No. MPCB suitable for 1.1KW motor with DOL starter & isolator near the fan. No. 1 194,250.14 194,250.14
(8th floor Panel) -described as above - -
- -
6 (9th floor Panel) INDOOR RATED (15 KA ,IP-42) - -
i INCOMING - -
2 Nos.125A, 15 KA 4P Thermal magnetic Relese MCCB WITH Adjustable O/L, S/C &E/F protections . - -

2 No. 125 Amps 4P AC3 duty contactor with following accessories,

• ON/ OFF push button,
• Auto/ Manual Switch, - -
• Delay timer
• electrically/ mechanically interlocking
Metering & Indication - -
2No.multifunction meter for measuring following electrical parameters, 2 No. 125/5 amps 5VA CTs,
Cl -1 • Current WITH RS-485. - -
Phase indicating light shall be protected by 2 Amps SP MCB's. - 2 Set - -
ON / OFF/ TRIP indicating lights with control 2 Amps SP MCB's. - 2 Set - -
Numeric Relay as per Local regulation - 2 Set - -
Surge Protection-2Set - -
- -
ii BUSBAR - -

Electrolytic high conductivity aluminium three phase and neutral busbars rated at 160 amps having
a maximum current density of 1 amp per sq mm suitable to with stand symmetrical fault level of 15 - -
kA at 415 V. The neutral busbar is to be of same size as phases.

iii OUTGOING - -
2No.100A, 20 KA TPN MCCB - -
3No.63A, 20 KA TPN MCB - -
1No.40A, 20 KA TPN MCB - -
1No.32A, 20 KA DP MCB No. 1 188,489.06 188,489.06
1 No. MPCB suitable for 1.1KW motor with DOL starter & isolator near the fan. - -
(9th floor Panel) -described as above - -
- -
7 LIFT PANEL-1 INDOOR RATED (10KA ,IP-42) - -
i INCOMING - -
2 Nos.100A, 10 KA 4P Microprocesser Relese MCCB WITH Adjustable O/L, S/C &E/F protections . - -
Metering & Indication - -
2No.multifunction meter for measuring following electrical parameters, 2 No.100/5 amps 7.5VA
CTs, Cl -1 • Current WITH RS-485. - -
Phase indicating light shall be protected by 2 Amps SP MCB's. - 2 Set - -
ON / OFF/ TRIP indicating lights with control 2 Amps SP MCB's. - 2 Set - -
Numeric Relay as per Local regulation - 2 Set - -
Surge Protection-2Set - -
- -
ii ATS - -
1 No. 100 A 4P automatic transfer switch. - -
ENVIRONS
Page 22
(Building Services Consultants)
 - -
iii BUSBAR - -

Electrolytic high conductivity aluminium three phase and neutral busbars rated at 125 amps having
a maximum current density of 1 amp per sq mm suitable to with stand symmetrical fault level of 10 - -
kA at 415 V. The neutral busbar is to be of same size as phases.

- -
iv OUTGOING - -
4 No.40A, 10 KA TPN MCCB - -
1 No.32A, 10 KA DP MCB No. 2 183,550.58 367,101.15
LIFT PANEL-1 -described as above - -
- -
8 BASEMENT-2 PANEL INDOOR RATED (10 KA ,IP-42) - -
i INCOMING - -
1 Nos.125 A, 10 KA 4P Thermal magnetic Relese MCCB WITH Adjustable O/L, S/C &E/F -
-
protections .
Metering & Indication - -
1No.multifunction meter for measuring following electrical parameters, 1 No. 125/5 amps 5 VA
CTs, Cl -1 • Current WITH RS-485. - -

Phase indicating light shall be protected by 2 Amps SP MCB's. - 1 Set - -

ON / OFF/ TRIP indicating lights with control 2 Amps SP MCB's. - 1 Set - -
Numeric Relay as per Local regulation - 1Set - -
Surge Protection-1Set - -
- -
ii BUSBAR - -

Electrolytic high conductivity aluminium three phase and neutral busbars rated at 160 amps having
a maximum current density of 1 amp per sq mm suitable to with stand symmetrical fault level of 10 - -
kA at 415 V. The neutral busbar is to be of same size as phases.

iii OUTGOING - -
1No.63A, 10 KA TPN MCB - -
6 No.40A, 10 KA TPN MCB - -
2 No.25A, 10 KA TPN MCB - -
2 No.16A, 10 KA TPN MCB - -
1 No. MPCB suitable for 5.5 KW motor with Star delta starter & isolator near the fan. - -
3 No. MPCB suitable for 3.7-2.5 KW motor with DOL starter & isolator near the fan. No. 1 105,356.38 105,356.38
BASEMENT-2 PANEL-described as above - -
- -
9 BASEMENT-1 PANEL INDOOR RATED (15 KA ,IP-42) - -
i INCOMING - -
1 Nos.200 A, 15 KA 4P Thermal magnetic Relese MCCB WITH Adjustable O/L, S/C &E/F
protections . - -
Metering & Indication - -
1No.multifunction meter for measuring following electrical parameters, 1 No. 200/5 amps 5 VA
CTs, Cl -1 • Current WITH RS-485. - -

Phase indicating light shall be protected by 2 Amps SP MCB's. - 1 Set - -

ON / OFF/ TRIP indicating lights with control 2 Amps SP MCB's. - 1 Set - -
Numeric Relay as per Local regulation - 1Set - -
Surge Protection-1Set - -
- -
ii BUSBAR - -

Electrolytic high conductivity aluminium three phase and neutral busbars rated at 250 amps having
a maximum current density of 1 amp per sq mm suitable to with stand symmetrical fault level of 15 - -
kA at 415 V. The neutral busbar is to be of same size as phases.

iii OUTGOING - -
2 No.63A, 10 KA TPN MCB - -
6 No.40A, 10 KA TPN MCB - -
1 No.25A, 10 KA TPN MCB - -
2 No. MPCB Suitable for 3.7-1.1 KW motor with DOL starter & isolator near the fan. No. 1 99,594.78 99,594.78
Basement -1 Panel described as above - -
- -
10 MAIN EXTERNAL FEEDER PILLAR (OUTDOOR RATED) - -
i INCOMING - -

1 No 25A, 10 KA 4P Thermal Magnetic Relese MCCB WITH Adjustable O/L, S/C & Protections WITH
ON , OFF, TRIP Indication and 1 set cast resin current transformers of 25/5A ratio with 5 VA - -
Burden & Class 1.0 with Digital Multi Function Meter(MFM) with 485 communication port .

1 set of RYB & ON OFF TRIP indication lamp - -

1 nos. cast resin current transformers of 25/5A ratio with 5 VA Burden & Class 1.0 with -
-
Multifunction meter
1 No. Surge protection Type 1+2 (63A TP+NL MPCB) - -
- -
ii BUSBAR - -

Electrolytic high conductivity aluminium three phase and neutral busbars rated at 63 amps having a
maximum current density of 1 amp per sq mm suitable to with stand symmetrical fault level of - -
10kA at 415 V. The neutral busbar is to be of same size as phases.

- -
iii OUTGOING - -
14 Nos. 16 a TPN MCB No. 1 97,948.59 97,948.59
- -
CAPACITOR BANKS : ( 430 KVAR )(INDOOR TYPE)(APFC) Capacitors Panels shall be certified as per
11 IEC-61439-1&2, IS 16636 AND IEC-61921 - -

Design, manufacture supplying, installation, testing & commissioning of APP type with the
following capacity capacitor banks described below shall be used to form required banks. Proper
angle iron frame shall be provided to house these units. Also provide bus bars & discharges resis­ - -
tance. Suitable for 3 phase 400/440 volts 50 c/s supply system as specified in the specifica­tions
include wiring between panel to banks. These Banks would be a part of the Automatic Power
Factor Correction Panel.

100 KVAR capacitor banks -2Sets - -

50KVAR capacitor banks - 2Sets - -
25 KVAR capacitor banks - 4 Sets - -
15 KVAR capacitor banks -2Sets - -

Design, manufacture supplying, installation, testing & commissioning of the following integrated,
cubicle type automatic switching "ON" & "OFF" capacitor control panel with dust and vermin proof
hinged lockable doors complete with interconnections cable glands lugs, bonding to earth and
- -
painting (suitable for 400/440 volts 3 phase control boards ) shall be provided with fuse switch
units with HRC fuses & stepped relay, contactors & push buttons, frequency meters & CT's
complete as required.

Automatic Power Factor Correction Panel for 430 KVAR Capacitor Bank shall consist of: - -

i INCOMER - -
One No. 800 A 4P EDO ACB with RYB indication - -
1000 Amps TPN Bus bar chamber of suit­able length with Al bus bars. - -
The current density of Al shall not be more than 1.0 Amps per Sq. mm cross sectional area of Bus
Bar. - -
ii INDICATING PANEL - -
1 Set RYB & On Off Trip indication lamp - -
Power factor meter. - -
1 nos. cast resin current transformers of 800/5A ratio with 15 VA Burden & Class 1.0with Ammeter
with selector switch. - -
1 No. 0-500 V Voltmeter with selector switch. - -
Proper ratio Power Factor CT's in the main MV panel. - -
iii OUTGOINGS - -
250 A SFU TP with Semiconductor Fuse Link -2Nos. - -
160 A SFU TP with Semiconductor Fuse Link -2Nos. - -
80 A SFU TP with Semiconductor Fuse Link- 4 Nos. - -
40 A SFU TP with Semiconductor Fuse Link-2 Nos. - -
Push button stations "RED" and "GREEN" push but­tons for manual operation of contactors–10 Sets - -
Toggle switches for changing automatic to manual operation of contactors-10 Sets - -
Terminal block for terminating outgoing connections. - -
All interconnections from bus bar to contactors and contactors to terminal blocks etc. - -
Wiring for APFCR connections shall be done between main MV. Panel to capacitor banks in M.S. -
-
conduit.
Automatic Power Factor Correction Panel for 430 KVAR Capacitor Bank as described above. - -
- -
iv Detuned Filter - -
- -

LV harmonics filters shall be used with harmonics detuned filter dutypower capacitors to mitigate
harmonics, improve power factor and avoide electrical resonance in LV electrical networks. - -

- -
The complete unit shall be impregnated under vacuum and over pressure in impregnation resin
- -
and shall be suitable for temperature class H operation.
- -
ENVIRONS
Page 23
(Building Services Consultants)
 The reactor shall be tested using a separate source voltage test of 3 kV (coil to core) for one minute -
-
as per IEC-60076/3
- -

The limit of linearity of inductance of the filter reactor shall be as follows 1.2•∑ In with L= 0.95 LN - -
- -
Fast response time of ‘ON’ capacitors 7-10 miliseconds. - -
- -

THE KVAR OF Capacitor Panel Bank Should be Increase to Take Care Of Drop Across 14% Reactor. - -

Fast real time thyristor switching module. Set 1 948,208.17 948,208.17

- -
D GAS FLOODING SYSTEM - -

Supply, fixing, testing and commissioning of automatic Linear pneumatic Tube Detection based
1 Novec 1230 System for Electrical Panels (Linear Pneumatic Heat Detection Tube Panel Protection - -
System), consisting of the Mentioned components.Make:FireTrex, Trace Fire, Safe fire

2kg capacity Novec 1230 , DLP Assembly with automatic valve, push in connector for tube, Novec
1.1 1230 , mounting bracket, End of Line adopter and low pressure switch for monitoring system Nos 2 - -
activation.

4kg capacity Novec 1230 , DLP Assembly with automatic valve, push in connector for tube, Novec
1.2 1230 , mounting bracket, End of Line adopter and low pressure switch for monitoring system Nos 7 - -
activation.

1.3 Linear pneumatic heat Detection Tube with all necessary fittings & supports. Rmt 310 - -
Master Control Unit to monitor system pressure and have integration to Fire Alarm System/BMS
1.4 System. Nos 5 - -

1.5 Installation & Commissioning Job 5 - -

Exclusion- - -
1- Light fixtures of Rooms and common area and BOH area. - -
2 BOH area electrical works . - -
- -
- -

Total 6,075,452.44

ENVIRONS
Page 24
(Building Services Consultants)
Name
of
Project
Work: Name: Proposed Hotel Building For Krishna Group@ Velachery
Lightni RRP
ng
SL NO.
Protec DESCRIPTION UNIT QTY RATE AMOUNT
tion

E LIGHTNING PROTECTION SYSTEM

Providing & Fixing Parallel Connectors for (700mm air terminal) connecting two conductors in parallel manner.
1 Material- StSt, with clamping range- Rd / Rd 7-10 mm & Complied as per Standard EN 62561-1. nos. 8 1,257 10,053

Providing & Fixing Universal connector of Material- StSt, with clamping range- 8-10mm, with truss head screw
2 M10x35 mm & Complied as per Standard EN 62561-1., nos. 55 251 13,823

Providing & Fixing Air-termination rod having length- 3000 mm, of Material- AlMgSi, of Diameter Ø 16 / 10 mm, chamfered
on both ends, & Complied as per Standard EN 62561-2. nos. 9 2,809 25,285

Providing & Fixing Side Wall Clamp for air terminal, Material - StSt 304
Clamping range - 16/10 mm nos. 18 139 2,504
3
Providing & Fixing Air-termination rod clamps for connecting air-termination rods with one or two conductors.
Material of clamp Al, with clamping range of air-termination rod 16 mm and Clamping range of conductor Rd 2x 8-10 nos. 9 1,777 15,995
mm, & Complied as per Standard EN 62561-1.,

Providing & Fixing Roof Conductor of Diameter Ø- 8 mm, Cross-section- 50 mm2, of Material- AlMgSi & Complied as
per Standard EN 62561-2., meter 207 122 25,269

Providing & Fixing Roof conductor holder FB2 for flat roofs with concrete block-C35/45 with double conductor holder-
Rd 8 mm fixed, Dimension- 141 x 86 x 70 mm nos. 45 196 8,805
4

Providing & Fixing Conductor holder for Parapet wall/Side wall of Material- StSt, for Rd 8-10 mm & Fl 20 mm, Height-
20 mm & Complied as per Standard EN 62561-4. 207 69 14,307
nos.
With accessories Screw and Gitty, Material SS (M5 x 50mm)

Providing & Fixing Fixed earth-termination system for protective equipotential bonding and functional equipotential
bonding of the down.
Connection thread M10 / M12, material of plate- StSt,material of axis- Stat, having connection plate Ø 80 mm & nos. 18 2,100 37,807
Complied as per Standard EN 62561-1.
5
Providing & Fixing Clamp for holding fixed earthig terminal with Down Conductor (Rd/Rd 8-8/10-10) nos. 18 332 5,978
Providing & Fixing Clamp for connecting Fixed earthing terminal to round conductor.
nos. 18 139 2,504
Down Conductor 0 0
Providing & Fixing 10mm stainless steel round conductor, Material-stst, Cross Section- 78 mm2. Tested acc. to IEC
62561-2. meter 576 156 89,916
6
clamp for for holding metal column to 10mm SS conductor nos. 288 332 95,648
Providing & Fixing Fixed earth-termination system for protective equipotential bonding and functional equipotential
bonding of the down.
Connection thread M10 / M12, material of plate- StSt,material of axis- Stat, having connection plate Ø 80 mm & nos. 12 2,100 25,205
Complied as per Standard EN 62561-1.

7
Clamps to connect reinforcing steel mesh or reinforcement with round and flat conductors. of material- St/bare, having
clamping range- Rd / Rd 6-22 / 6-10 mm, Clamping range- Rd / Fl 6-22 / 40 mm & Complied as per Standard EN nos. 12 404 4,847
62561-1.

Clamp for connecting Fixed earthing terminal to round conductor. nos. 12 251 3,016

Total 380,963

ENVIRONS Page 25
(Building Services Consultants)
S.No.

a.

b.

c.

d.

e.

f.

g.

h.

1.1

1.2

2
 3

4
4.1

4.2

SUB HEAD-4 CABLES

10

11
11.1

11.4

12

12.1

12.4

13

13.1

13.2

13.3

13.4

13.5

13.6

13.7

13.8
14

14.1

14.2

14.3

14.4

14.5

14.6

14.7

15

15.1

15.2

15.3
S.No.

27

A
 28
a)
b)
c)
d)

29

a)
b)
c)

S.No.

E)
(a)
1
1.1
1.2
1.3
1.4
1.5
1.6
2

2.1
3.0
3.1
3.2
3.3
3.4
3.5

(b)
1
1.1
1.2

1.3
1.4
1.5
1.6
2

2.1
3.0
3.1
3.2
3.3

3.4

3.5

3.6
6

(a)

1.1
1.2

(b)

1.1
1.2
(c)

1.1
1.2
1.3
1.4

2.1
2.2
2.3
2.4
 3

3.1
3.1.1
3.1.2
3.1.3

3.2
3.2.1
3.2.2
3.2.3

3.3
3.3.1
3.3.2
3.3.3

4.1
4.2

1.1
1.2
1.3
1.4
6

1.1
1.2
1.3
7

7.1

7.1.1
7.1.2
7.1.3
 Description

DG
EARTHING INSTALLATION

Rates shall also include the following :

All fixing accessories such as brass saddles, brass screws rawl plugs etc.

Jointing by rivetting and brazing after rivetting in case of copper and welding / bolting in case of GI
earthing.

Cutting chases holes and making good the same wherever required.

Effecting adequate and proper interconnections.

Use of copper thimbles.

Earthing system shall comply to IS:3043-1987.

All earthing pits shall be interconnected.

EARTHING INSTALLATION

Supply, installation, Testing & Commissioning, fixing of following bare GI strips / wires including all
necessary fixing accessories and effecting connections as per specifications.

50 x 3 mm thick GI tape.
Supply& Installation

25 x 3 mm thick Cu. tape.

Supply& Installation

Providing, laying, testing and commissioning of 600 x 600 x 3.15 mm thick tined copper electrode,
with 2 Nos 25 x 3 mm copper strips from earth electrode to inspection chamber, 50 mm dia medium
class GI pipe, CI funnel with 20 gauge GI wire mesh, masonry chamber 450 x 450 mm with concrete
base CI/ heavy duty chequered plate manhole cover with frame painted with bitumastic paint and
packing with mixtures of charcoal and common salt around plate electrode including digging of pit
upto permanent moisture level and as per soil condition but not less than 3 meters and back filling as
required. 4 No for DG Set Neutral)
Supply& Installation
 Providing, laying, testing and commissioning of 600 x 600 x 6.3 mm thick GI electrode, with 2 NO.
50X 3 mm GI strips from earth electrode to inspection chamber, 50 mm dia medium class GI pipe, CI
funnel with 20 gauge GI wire mesh, masonry chamber 450 x 450 mm with concrete base CI / heavy
duty chequered plate manhole cover with fram painted with bitumastic paint and packing with
mixtures of charcoal and common salt around plate electrode including digging of pit upto permanent
moisture level but not less than 3 meters and back filling as required.( 4No For Body DG set )

Supply& Installation

Supply, laying, testing and commissioning of GI pipe under road / paved area crossing etc. including
excavation back filling ramming and making good.
50 mm dia pipe.
Supply& Installation

100 mm dia pipe.

Supply& Installation

TOTAL CARRIED TO SUMMARY

SUB HEAD-4 CABLES

The rate shall also include the following :

Providing and fixing junction boxes with covers including painting.

Effecting adequate and proper connections at terminations.

Providing all fixing accessories such as clamping devices nuts, bolts and screws.

Excavation laying of cable filling of sand, brick protection, back filling of earth, watering, ramming and
making good.

Wherever the cables are of aluminium and bus bars of copper bimetallic lugs shall be used.

All cable shall be laid with one diameter gap.

All cables shall be IS approved.

Fire retardent paint one meter on both side of wall penetration and at termination as per
specifications.

Burried LT cables to be laid atleast 750 mm below ground.

All cutouts / Sleeves shall be sealed with fire redardant sealent as per specification.

CABLES
Supplying, laying, testing & commissioning of following 1100 volt grade XLPE insulated PVC
sheathed aluminium conductor armoured cables as per specification in existing trenches, cable trays,
ducts over bed of sand, clamped includes anchor fastners wall with suitable clamps, saddles fixing
bolts including connecting testing and commissioning.
3.5 core 25 sq. mm.
Supply& Installation
3.5 core 300sq. mm.
Supply& Installation

Supply, fixing, testing & commissioning of Cable end termination of the following XLPE insulated PVC
sheathed aluminium conductor armoured cables of 1100 volt grade including supplying and fixing of
crimping aluminium lugs, double compression glands with earthing facility at both ends of cables etc.
complete as required.
3.5 core 25 sq. mm.
Supply& Installation
3.5 core 300sq. mm.
Supply& Installation

Supplying, laying, testing & commissioning of following 1100 volt grade XLPE insulated PVC
sheathed copper conductor armoured cable as per specification in existing trenches, cable trays
ducts over bed of sand, clamped includes anchor fastners to wall with suitable clamps, saddles fixing
bolts including connecting testing and commissioning.
4 core 6 sq.mm
Supply& Installation

4 core 4 sq. mm.

Supply& Installation

3 core 6 sq.mm
Supply& Installation

3 core 4 sq.mm
Supply& Installation

3 core 2.5 sq.mm control cable

Supply& Installation

7 core 2.5 sq.mm control cable

Supply& Installation

12 core 2.5 sq.mm control cable

Supply& Installation

Supply, Installation, testing & commissioning of Low resistance / amie braided cable including
termination for Temp scanner.
Supply& Installation
Supply, fixing, testing & commissioning of Cable end termination of the following XLPE insulated PVC
sheathed aluminium conductor armoured cables of 1100 volt grade including supplying and fixing of
crimping aluminium lugs, double compression glands with earthing facility at both ends of cables etc.
complete as required.
4 core 6 sq. mm Copper Cable
Supply& Installation

4 core 4 sq. mm Copper Cable

Supply& Installation

3 core 6 sq. mm Copper Cable

Supply& Installation

3 core 4 sq. mm Copper Cable

Supply& Installation

3 core 2.5 sq.mm Copper Cable

Supply& Installation

7 core 2.5 sq.mm Copper Cable

Supply& Installation

12 core 2.5 sq.mm Copper Cable

Supply& Installation

Design, manufacture , supply and fixing of factory fabricated hot dip galvanized ladder type cable
tays, with radial bends, supports and fixing hardware etc with of the following sizes as per
specification. The rate shall also include for suitable ready-made radial bends/reducers, necessary
GI supports , supporting down rods, anchor fasteners etc. including cutting, drilling holes, painting
etc. as required.
Note- (Up to 450 mm -consider as threaded type support & for above 450 mm -consider a GI
support). The rate shall include all accessories like , bends,elbows,tees,coupler plates,etc.
1200 MM WIDE CABLE TRAY
Runners 25 x 100 x 25 x 3 mm
Rungs 20 x 40 x 20 x 3 mm 250 mm C/C
3 No. Suspenders 40 x 40 x 5 mm GI angle 1500 mm C/C
Supply& Installation

900 MM WIDE CABLE TRAY

Runners 25 x 100 x 25 x 3 mm
Rungs 20 x 40 x 20 x 3 mm 250 mm C/C
3 No. Suspenders 40 x 40 x 5 mm GI angle 1500 mm C/C
Supply& Installation

450 MM WIDE CABLE TRAY

Runners 20 x 75 x 20 x 2.5 mm
Rungs 20 x 30 x 20 x 2.5 mm 250 mm C/C
Suspenders 3 Nos. 25 x 25 x 4 mm GI angle 1250 mm C/C
Supply& Installation

TOTAL CARRIED TO SUMMARY

Description

Plumbing

Design, manufacture & supplying the following front operated modular compartmentalised construction cubicle
type, front access, dead back, 2mm thick steel enclosed free standing, dust and vermin proof, switchboard with
IP42 protection with hinged and lockable doors duly powder coated complete lugs, bonding to earth and
painting, suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system, and suitable for a fault level of10KA )
symmetrical at 415 volts .
All switchboard shall have provision for entry of cables from the top as required.

All live accessible parts shall be shrouded and all equipment shall be finger touch proof.The Busbars insulation
shall be with heat shrinkable sleeves.SMS/DMS shrouds and busbars supports shall be used.Padlocking
facility shall be provided on all outgoing feeders doors and switch handles shall be lockable in OFF position.

All MCCB shall have rotary handles & extension terminal, phase barrier on both sides as required at site.
All metering panel shall be extendable type with cable alley.
All fault level braking capacity shall be Ics value ( ICS = 100% ICU )
All MCCB 100 amp and Above shall have variable settings.
INCOMING:
One 40 amps 10KA 4 Pole M.C.C.B. with over current and short circuit and earth fault with thermal magnetic
release with.
a) Square flush mounting 0-200 amp ammeter with 3 way and OFF selector switch.
b) 3 nos Cast resin current Transformers of 200/5 amp Class 1.0-5VA
c) Three phase indicating light ( LED type ) with MCB.
d) Square flush mounted voltmeter 0-500 volt with 3 way and OFF selector switch.
BUS BARS
Electrolytic high conductivity aluminium three phase and neutral busbars rated at 63 amps throughout having
interleaved design a maximum current density of 1 amp per sq mm suitable to with stand symmetrical fault
level of 10 KA at 415 volts. The neutral busbar is to be of 50% capacity.
OUTGOING FROM PLUMBING PANEL
a) 4 Nos -2 Amp.10 KA TP M.P.C.B.with thermal magnetic releasse having over current short circuit magnetic
protection.
b) 2 nos. 4 pole 32 A MCB
c) 2 nos DOL starters Motor of 1.5 HP with over load relay,contactors, time, push buttons, Auto/Manual
selector switch and phase indication light with MCB.
e) 8 Digital Panel type Amp. meters one for each motor with ASS. CTS etc.
f) 8 sets of On/Off - neon indicating lamp.
g)1 nos. 4 pole 16 A MCB
h) All interconnecting power & control wires/cables suitable size within the panel and from panel to motors
diesel engine, pressure switches, level switches, cable Tray, pipes etc. including brass glands termination
within fire pump house (Power cable size shall not be less than and 10 No 3 x 10 mm sq for all pumps motor,
including necessary RCC foundation for mounting of panel.
i) Panel to be made according to actual rating of pump with respect to selection chart.
j) Panel to be made according to Local Authority.
k) Energy metrer to be provided on the electrical panel in I/C.
OUTGOING FROM STP PANEL
a) 2 nos 32 A MCB with 10 KA for hydropneumatic.

Supplying and laying the XLPE insulated and sheathed armoured cables of 1.1 K.V. aluminum conductor
including supplying and making end termination with brass compression glands.
16 sq.mm x 3.5 core
4 sq.mm x 3.0 core
3c X 1.5sqmm
4c X 1.5sqmm

Supply and fixing of 14 SWG GI hot deep perforated cable trays with 25 mm wide vertical sides on both ends
as per approved design and MS painted angle supports spaced 1000 mm apart throughout the length as
specified, including the cost of MS threaded rod hangers, hooks, dash fasteners etc. for suspension from
ceiling as required
450 mm x 50 mm x 50 mm (with 40 x 40 x 6 mm MS angle supports and 10 mm dia MS rod hangers)
300 mm x 50 mm x 50 mm (with 40 x 40 x 6 mm MS angle supports and 10 mm dia MS rod hangers)
150 mm x 50 mm x 50 mm (with 40 x 40 x 6 mm MS angle supports and 10 mm dia MS rod hangers)
Total
Description

I. HVAC WORKS

VENTILATION SYSTEM
This schedule of Quantities shall be read in conjuction with the technical specification, General &
Special conditions as well as all tender drawings.
All Panel shall be confirm to IEC-60439

Supporting rigid steel framework.

Cubicle type, 14 gauge CRCA sheet steel enclosed.

Complete with interconnections and distribution bus bars.

Proper bonding to earth.

Painting/lettering on Breakers and distribution boards, the location they serve, providing on each
panel its circuit diagram.

Providing cable clamps / supports within distribution boards cable alley.

External Neutral CT shall be provided for all panels incommer MCCBs with microprocessor based
release (with inbuilt Earth Fault protection) to avoid nusiance tripping due to unbalanced loads.

All MCCBs should have Ics=100% of Icu

MCCBs upto 200A should be Thermal Magnetic type having O/L & S/C protections. All MCCBs above
200A shall have microprocessor release with adjustable O/L, S/C & inbuilt E/F protections.

MCCBs above 63A ratings should be provided with Copper Spreader Links & Phase barriers
3 Pole power contactors should be AC3 duty for motor switching and AC1 for other resistive /
Lighting loads. 4 Pole contactors should be AC1 duty unless otherwise specified

All MCB’s shall be of minimum 10 KA breaking capacity or as required.

All motor feeders MCCBs / MPCBs shall be of motor duty.selected as per Type II coordination chart of
manufacturer

Distribution panels shall be Powder Coated with Siemens gray paint shade no. RAL-7032 of IS-5.with
60-80 micron thickness.

Degree of protection for following type of distribution panel enclosure shall be as per IS:13947-1993.

IP 42 for indoor panels.

IP 55 for outdoor panels.

All MCCB’s shall be provided with operating mechanism for door interlock.

Current density of aluminium busbars shall be 1 A/sq mm and current density of copper shall be
1.6A/sq.mm

Tinned copper / GI earth bus as specified in the BOQ shall be provided through out the length of each
board.

All measuring instruments (Meters) shall be of digital electronic with LED of approved make and
compatible with BAS.

All hinged door shall be earthed through 2.5 sq mm tinned braided copper wire.

All panels shall have provision of the following:

Pad locking of Switch board doors.

Pad locking of MCCB’s handles in “OFF” Position.

2NO + 2NC potential free contacts, connectors, contactors with wiring etc are to be provided for BAS
including space required for various transducers in all incomers sections. Only transducers shall be
supplied by BAS contractor.
All MCB’s used for protection of resistive and lightly inductive load shall be type “B” characteristic
and inductive (motor) load shall be of type “C” characteristic and discharge lamps and UPS etc. shall
be of type D characteristic.

All incoming and outgoing air circuit breakers shall be placed on middle portion of the vertical in
single tier formation.

All PTs / control transformer shall be provided with center tap earth secondary.
Multifunction meter parameter shall be – Voltage , current, Power factor, Frequency , active Power,
reactive power & apperant power, Maximum demand indicator , unbalance voltage , unbalance
current , RS485 port , % loading harmonics.
DOL starter shall be consider upto 5 kw and above 5 kw star delta starter to be consider.

All outgoing shall be provided with Stop / Manual /Auto selector switch to facilitate remote
operation through BAS. All starters shall be provided with potential free Contact.

The panel shall include the following components and accessories.

a. MCCB with over-load relay and single phase preventer as per the ratings given below, suitable for
motor duty.

b. All panel shall be intrigated with PLC panel.

c. For on/off/remote and local operation, 3 pole single throw switch shall be provided in each fan
panel to facilitate override of the automatic operation.

Push button station shall be provided near the fan room for each fan( for all vane axiale fans
excluding Jet fans), please refer the specification for more detail.

DOL starter shall be consider upto 5 kw and above 5 kw star delta starter to be consider.

Note :- All starters shall be provided with suitable potential free contract for connections to the
Building Automation System.

Terrace Panel (Panel shall be with IP-55 rated ,15KA)

INCOMING
1 No. 800 A, 415V, 4P MCCB (15KA)
1 No. R Y B indication lamp with 2 A MCB
1 No. 800/5 class -1.0 , 15VA with multifunction meter.(Voltmeter / Ammeter / frequency Meter /
Power factor meter / active power /reactive power / apparent power / energy meter / voltage
unbalance /current unbalance , RS485 port / % loading /Harmonics/ Maximum demand indicator)

1- set of on/ off /trip indication lamp

1- set of Numeric Relay as per Local regulation
1 No. Surge Protection.
BUSBAR
Electrolytic high conductivity aluminium three phase and neutral busbar rated at 1000 amps having a
maximum current density of 1 amp per sq mm suitable to with stand symmetrical fault level of 15 kA
at 415 V. The neutral busbar is to be of same size as phases.
OUTGOING
1No. 160 A, TPN MCCB
1No. 63 A, TPN MCCB
11No. 100 A,4P RCBO(300 mA)
1No. 63 A, 4P RCBO(300 mA)
1No. 40A, 4P RCBO(300 mA)
Quote for Terrace panel , Panel as describe above
Terrace Emergency Panel (Panel shall be with IP-55 rated ,10KA)
INCOMING
1 No. 160 A, 415V, 4P MCCB (10KA)
1 No. R Y B indication lamp with 2 A MCB

1 No. 160/5 class -1.0 , 7.5VA with multifunction meter.(Voltmeter / Ammeter / frequency Meter /
Power factor meter / active power /reactive power / apparent power / energy meter / voltage
unbalance /current unbalance , RS485 port / % loading /Harmonics/ Maximum demand indicator)

1- set of on/ off /trip indication lamp

1- set of Numeric Relay as per Local regulation
1 No. Surge Protection.
BUSBAR
Electrolytic high conductivity aluminium three phase and neutral busbar rated at 200 amps having a
maximum current density of 1 amp per sq mm suitable to with stand symmetrical fault level of 10 kA
at 415 V. The neutral busbar is to be of same size as phases.
OUTGOING
4No. 40 A, TPN MCB
1No. 32 A, TPN MCB
2No. 25 A, TPN MCB
6 Nos. TP MPCB suitable for 2.5 to 1.1 KW motor with DOL stater with On Off Trip Indication Lamp
with 2A MCB.
2 Nos. TP MPCB suitable for 3.7 KW motor with VFD by pass DOL stater with On Off Trip Indication
Lamp with 2A MCB.
2Nos. TP MPCB suitable for 7.5 KW motor with Star delta stater with On Off Trip Indication Lamp
with 2A MCB.
Quote for Terrace Emergency panel , Panel as describe above

TOTAL CARRIED OVER TO SUMMARY

FIRE SURVIVAL CABLE & CABLE TRAY

Fire Survival armoured (1000V) cable with Class-2 annealed Aluminium conductor having Mineral
ceramic glass fire barrier tape covered by an extruded layer of Low Smoke Zero Halogen (LSZH)
Cross-linkable insulation as per EI-5 OF BS EN 50363 along with ATC drain wire, aluminium tape
screening and LSZH outer sheath as per BS 7629-1 & BS 5839-1 (latest edition). Outer sheath should
be Anti Rodent/Anti Termite. Should retain circuit integrity as per BS 8434-2. To be clamped directly
to the robust ceiling complete with termination and testing as per requirement. BRE Global certified

3CX6 SQ. MM copper Ar. Fire Survival Cable

3CX4SQ. MM copper.Ar. Fire Survival Cable
SUB HEAD-13 Total Amount (Rs.)

Supplying and making terminal joints for the following size of Fire Survival cables including providing
heavy duty copper/Aluminium terminal crimping lugs, solder, insulation tape, approved sealing
epoxy compound, double compression brass compression cable glands, effecting gland connections
and effecting terminal connections to the equipment complete as required.

3CX6 SQ. MM copper Ar. Fire Survival Cable

3CX4SQ. MM copper.Ar. Fire Survival Cable
CABLES

Supply and laying of cable in Tray/clamped to wall with suitable clamps saddles and fixing bolts/ in
ground and including testing and commissioning of the following 1100 volt grade armoured XLPE
insulated FRLS and sheathed copper(Cu)/AL conductor armoured cable complete as required. The
costs shall include for all cables to be provided with a 1D gap and shall be properly clamped with
cable clamps and ties. Identification tags shall be provided for all cables and route markers for cables
in ground.

3.5cx25SQ. MM . AL. AR.XLPE FRLS CABLE

3.5cx16SQ. MM . AL. AR.XLPE FRLS CABLE
3.5cx10SQ. MM . AL. AR.XLPE FRLS CABLE
3.5cx6SQ. MM . AL. AR.XLPE FRLS CABLE
Supplying and making terminal joints for the following size of 1.1 KV PVC insulated copper(Cu) /AL
conductor armoured FRLS cables including providing heavy duty copper terminal crimping lugs,
solder, insulation tape, approved sealing epoxy compound, double compression brass compression
cable glands, effecting gland connections and effecting terminal connections to the equipment
complete as required.
3.5cx25SQ. MM . AL. AR.XLPE FRLS CABLE
3.5cx16SQ. MM . AL. AR.XLPE FRLS CABLE
3.5cx10SQ. MM . AL. AR.XLPE FRLS CABLE
3.5cx6SQ. MM . AL. AR.XLPE FRLS CABLE
Design, manufacture , supply and fixing of factory fabricated hot dip galvanized ladder type cable
tays, with radial bends, supports and fixing hardware etc with of the following sizes as per
specification. The rate shall also include for suitable ready-made radial bends/reducers, necessary GI
support , supporting down rods, anchor fasteners etc. including cutting, drilling holes, painting etc. as
required.

750MM WIDE CABLE TRAY

Runners 20 x 75 x 20 x 2.5 mm
Rungs 20 x 30 x 20 x 2.5 mm 250 mm C/C
3 No. Suspenders 32 x 32 x 4 mm GI angle 1800 mm C/C

600MM WIDE CABLE TRAY

Runners 20 x 75 x 20 x 2.5 mm
Rungs 20 x 30 x 20 x 2.5 mm 250 mm C/C
3 No. Suspenders 32 x 32 x 4 mm GI angle 1800 mm C/C

450 MM WIDE CABLE TRAY

Runners 20 x 75 x 20 x 2.5 mm
Rungs 20 x 30 x 20 x 2.5 mm 250 mm C/C
Suspenders 3 Nos. 25 x 25 x 4 mm GI angle 1250 mm C/C

Design, manufacture , supply and fixing in position the perforated type cable trays of the following
sizes for supporting 1.1 KV grade armoured/ unarmoured aluminum / copper conductor cables. The
hot dip galvanised type will be with 2-2.5mm thick GI CRCA sheet with expansion coupler plates
duly hot dip galvanized, with bolts, washer and nuts. Knock out holes for cable connections as per
approved design. The tray should comply with the specification of NEC (National Electric Codes) and
NEMA (National Electric Manufacturers Association). The steel should be as per IS:226 and hot dip
galvanizing as per IS :2629/BS 729/ASTM 123. The rate shall also include for suitable readymade
radial bends/reducers, necessary GI support , supporting down rods, anchor fasteners etc. including
cutting, drilling holes, welding, painting etc. as required.

300 x 40 x 40 x 2 mm thick cable tray

150 x 40 x 40 x 2 mm thick Cable tray

EARTHING

Supply and laying, Testing and commissioning of copper/GI Strips/wire for interconnecting the earthing
stations ,panels,of the following sizes in built up trenches /surface/wall/ground complete with holes &
fixing,jointing / terminating accessories as per specifications & drawing as required. (Quantity shall be paid as
per the actual measurement as executed, however direct measurement shall not excced the quantity
indicated in drawing approved .

50 mm x 6 mm GI Strip
50 mm x 5 mm GI strip
50mm x 3 mm GI strip
8 SWG wire
CONTROL CABLES

Supply and laying in Control Cable Tray/clamped to wall with suitable clamps saddles and fixing bolts/ in
ground including the cost of digging and back filling with sand and brick protection as required and including
testing and commissioning of the following 1100 volt grade armoured XLPE insulated and sheathed aluminium
conductor armoured cable complete as required. The costs shall include for all cables to be provided with a
1D gap and shall be properly clamped with cable clamps and ties. Identification tags shall be provided for all
cables and route markers for cables in ground.

6cx2.5 sq mm Copper Cable

4cx2.5 sq mm Copper Cable
2cx2.5 sq mm Copper Cable
Cable Termination
Making cable end terminations including brass double compression 'crimping type copper lugs for 'cable sizes
mentioned below of '(Glands form part of Panels / DB's)
6cx2.5 sq mm Copper Cable
4cx2.5 sq mm Copper Cable
2cx2.5 sq mm Copper Cable
SUB total

Grand Total
 RRP
Unit Quantity Rate Amount

RM 50 150.16 7,508.21
- -
- -
RM 50 695.10 34,754.99
- -

- -

No. 4 25,979.36 103,917.43

- -
 - -

No. 4 13,684.78 54,739.12

- -
- -
- -
RM 35 486.38 17,023.34
- -
- -
RM 50 999.21 49,960.30
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
 - -

- -
RM RO 187.00
- -
RM 130 1,551.70 201,720.63
- -

- -

- -
No. RO 424.99
- -
No. 14 2,454.57 34,364.00
- -

- -

- -
RM 5 348.49 1,742.47
- -
- -
RM 5 249.33 1,246.65
- -
- -
RM 5 265.38 1,326.92
- -
- -
RM 5 193.61 968.04
- -
- -
RM 50 145.44 7,272.10
- -
- -
RM 50 274.83 13,741.44
- -
- -
RM 50 415.55 20,777.44
- -
- -
RM 100 477.88 47,788.12
 - -

- -

- -
No. 2 325.83 651.66
- -
- -
No. 2 304.11 608.21
- -
- -
No. 2 312.61 625.21
- -
- -
No. 2 287.11 574.21
- -
- -
No. 5 260.66 1,303.31
- -
- -
No. 5 390.99 1,954.97
- -
- -
No. 5 456.16 2,280.80
- -

- -

- -
- -
- -
- -
- -
RM 5 2,519.74 12,598.69
- -
- -
- -
- -
- -
RM 5 2,128.74 10,643.72
- -
- -
 - -
- -
- -
RM 5 1,206.04 6,030.18
- -
-
- 636,122.18
-
Unit Quantity Amount
Rate
-
-

-
-
-
-
-
-
-
-
-
-
-

-
-
-
-
-
-
-

-
 -
-
-
-
Set 1 184,201.47 184201.471168
- 0

-
0
Mtr. 100 161.61 16161.0724704
Mtr. 100 118.17 11816.6981504
Mtr. 50 132.94 6646.8927096
Mtr. 50 145.10 7255.1051144
- 0

-
0
Mtr. 100 1,946.28 194627.969536
Mtr. 100 1,650.86 165086.22416
Mtr. 50 1,238.15 61907.33406
- 647,703
Unit Quantity Rate Amount

-
-
-

-
-
-
-
-
-
-
-
-
-
-

-
-
-
-

-
-
-
-

-
-
-
-

-
-

-
-

-
-
-
-
-
-
-

-
-

-
-

-
-
-
-
-
-
-
-
-
-

-
-

-
-

-
-
-

-
-
-

-
-
-
-

-
-
-
-

-
-

-
-
-
-
-

-
-
-
-
-
-
 -
-
-
-
-

-
-
-
-
-
-
-
No. 1 316,903.22 316,903
- -
- -
- -
- -

- -
- -
- -
- -
- -

- -
- -
- -
- -
- -

- -

- -

- -
No. 1 304,848.52 304,849
- -
- -
- -

- -
RM RO 320.61
RM RO -
- -
- -

- -
Nos. RO 499.60
Nos. RO -
- -

- -
RM 100 198.97 19,897
RM 100 157.27 15,727
RM 40 132.94 5,318
RM 40 106.00 4,240

- -
Nos. 12 682.07 8,185
Nos. 10 665.56 6,656
Nos. 2 654.26 1,309
Nos. 40 649.05 25,962
 - -
- -
RM 20 1,557.02 31,140
- -
- -
- -
- -
RM 20 1,413.66 28,273
- -
- -
- -
- -
RM 30 1,251.18 37,535
- -
- -
- -
- -

- -
- -
RM 20 1,115.64 22,313
RM 20 748.97 14,979
- -
- -

- -
RM 50 225.91 11,295
RM 50 217.22 10,861
RM 50 150.16 7,508
RM 100 13.03 1,303
- -

- -
RM 50 316.38 15,819
RM 50 233.27 11,664
RM 50 154.89 7,744
- -

- -
Nos. 4 691.32 2,765
Nos. 4 567.60 2,270
Nos. 4 541.16 2,165
916,681

2,200,505.61
Project Name: Proposed Hotel Building For Krishna Group@ Velachery
Name of Work:-Kitchen Electrical BOQ
S. No.

3.1
3.2
3.3
3.4
3.5
3.6

5
 6

6.1
6.2

7.1
7.2

8.1
8.2

9
9.1
9.2

10

10.1
10.2
10.3
10.4
10.5
10.6
10.7
10.8
10.9
10.1

11
11.1
i

ii

iii

11.2
 i

ii

iii

11.3
i

ii

iii

11.4
 i

ii

iii

11.5
i

ii

iii
12

1.1
1.2
1.3
1.4

2.1
2.2
2.3
2.4

3.1
3.2
3.3
3.4

4.1
4.2
4.3
4.4

5.1

5.2

13

1.1

1.1

2.1

14
1

1.1

2.1

3.1
3.2
Project Name: Proposed Hotel Building For Krishna Group@ Velachery
Name of Work:-Kitchen Electrical BOQ
Description
SUB HEAD-(KITCHEN)
SUB HEAD-1 (POINT WIRING)

Note :The conduit size and no. of wires in the conduits will be as per MEA standard. The bidder has to quote with
switches and cover plates .The model of switch and cover plates shall be approved by Engineer in Charge.

Supply & Wiring of primary light point with FRLS PVC insulated 2 X 1.5sq.mm stranded copper conductor wires &
earthing with 1X 1.5 sq.mm FRLS PVC insulated Cu. Conductor 1100 Volt grade from DB. Via switch in uPVC conduit
including supply& fixing of conduit on wall (surface/concealed) / ceiling, chase cutting & filling, fixing of saddles,
Reinforced flexible drop, providing and fixing zinc chromate passivated GI box, modular 6/13/16 A switch, modular
plate and cover plate, deep tee, circuit wiring etc. complete in all respects including testing & commissioning as
required.

Supply & Wiring of Secondary light point ( from Switch to loop light point ) with FRLS PVC insulated 2 X 1.5sq.mm
stranded copper conductor wires & earthing with 1X 1.5 sq.mm FRLS PVC insulated Cu. Conductor 1100 Volt grade
in uPVC conduit including fixing of conduit on wall (surface/concealed)/ceiling, chase cutting & filling, fixing of
saddles, Reinforced flexible drop, deep tee, circuit wiring etc. complete in all respects including testing &
commissioning as required.

Wiring for the following Two way control light points with 3Cx1.5 sq.mm PVC insulated copper conductor wires in
concealed uPVC conduits in False ceiling / walls / Ceiling as directed including providing 3x1.5 sq.mm circuit wiring,
2 nos. 2 way 6/10/16 amps flush type switches, 5 sided GI boxes for housi­ng switches and earth­ing complete as
required.
One point in group controlled by 2 Nos. 2 way 6/10/16 amps switch
Two point in group controlled by 2 Nos. 2 way 6/10/16 amps switch
Three points in group controlled by 2 Nos. 2 way 6/10/16 amps switch
Four points in group controlled by 2 Nos. 2 way 6/10/16 amps switch
Seven points in group controlled by 2 Nos. 2 way 6/10/16 amps switch
Eight points in group controlled by 2 Nos. 2 way 6/10/16 amps switch

Supply & Wiring of primary light point for MCB controlled Points with FRLS PVC insulated 2 X 1.5sq.mm stranded
copper conductor wires & earthing with 1X 1.5 sq.mm FRLS PVC insulated Cu. Conductor from DB. in uPVC conduit
including supply&fixing of conduit on wall (surface/concealed) / ceiling, chase cutting & filling, fixing of saddles,
Reinforced flexible drop, deep tee, circuit wiring etc. complete in all respects including testing & commissioning as
required.

Supply & Wiring of Secondary light point for MCB controlled points ( from First light point to loop light point ) with
FRLS PVC insulated 2 X 1.5sq.mm stranded copper conductor wires & earthing with 1X 1.5 sq.mm FRLS PVC
insulated Cu. Conductor 1100 Volt gradein uPVC conduit including supply& fixing of conduit on wall
(surface/concealed)/ceiling, chase cutting & filling, fixing of saddles, Reinforced flexible drop, deep tee, circuit
wiring etc. complete in all respects including testing & commissioning as required.
Supply & Wiring for Weather proof socket outlet with FRLS PVC insulated 2 X2.5 sq.mm stranded copper
conductor wires & earthing with 1X 2.5 sq.mm FRLS PVC insulated Cu. Conductor 1100 Volt grade in uPVC conduit
including fixing of conduit on wall surface/concealed)/ceiling, chase cutting & filling, fixing of saddles, deep tee,
circuit wiring etc. and providing and fixing of 110 volt 10/16/20 amp socket outlet with safety shutters and
10/16/20 amp 240 volt single pole modular mounted switch with moulded cover plate in recessed zinc chromate
passivated GI box and including earthing of the 3rd pin complete as required.

Primary Point ( DB to first switch sockets -Normal Supply)

Same as item no. 6.0 above but Secondary point. i.e. Points to be looped with Primary point.(Normal Supply)

Supply & Wiring for Weather proof socket outlet with FRLS PVC insulated 2 X 2.5 sq.mm stranded copper
conductor wires & earthing with 1X 2.5 sq.mm FRLS PVC insulated Cu. Conductor 1100 Volt grade in uPVC conduit
including fixing of conduit on wall surface/concealed)/ceiling, chase cutting & filling, fixing of saddles, deep tee,
circuit wiring etc. and providing and fixing of 110 volt 10/16/20 amp socket outlet with safety shutters and
10/16/20 amp 240 volt single pole modular mounted switch with moulded cover plate in recessed zinc chromate
passivated GI box and including earthing of the 3rd pin complete as required.

Primary Point ( DB to first switch sockets -Normal Supply)

Same as item no. 7.0 above but Secondary point. i.e. Points to be looped with Primary point.(Normal Supply)

Supply & Wiring for Weather proof socket outlet with FRLS PVC insulated 2 X 4.0 sq.mm stranded copper
conductor wires & earthing with 1X 4.0 sq.mm FRLS PVC insulated Cu. Conductor 1100 Volt grade in uPVC conduit
including fixing of conduit on wall surface/concealed)/ceiling, chase cutting & filling, fixing of saddles, deep tee,
circuit wiring etc. and providing and fixing of 110 volt 10/16/20 amp socket outlet with safety shutters and
10/16/20 amp 240 volt single pole modular mounted switch with moulded cover plate in recessed zinc chromate
passivated GI box and including earthing of the 3rd pin complete as required.

Primary Point ( DB to first switch sockets -Normal Supply)

Same as item no. 8.0 above but Secondary point. i.e. Points to be looped with Primary point.(Normal Supply)

Supply and installation of surface/concealed conduit including cost of providing saddles etc for surface conduiting
and/or cost of cutting and filling chases.
25 mm MS conduit
32 mm MS conduit

Providing and fixing of following PVC insulated FRLS copper conductor 1100 volt grade stranded flexible FRLS wire
in MS conduit includingsupply& fixing of conduit on wall (surface/concelled)/ceiling, chase cutting & filling, fixing of
saddles, Reinforced flexible drop, deep tee, making connections complete as per requirement.

2X1.5+1X1.5sqm 'CU' WIRE IN CONDUIT

2X2.5+1X2.5sqm 'CU' WIRE IN CONDUIT
2X4.0+1X4sq.mm Cu. WIRES IN CONDUIT
2X6.0+1X4sq.mm Cu. WIRES IN CONDUIT
4X6.0+2X6sq.mm Cu. WIRES IN CONDUIT
5X6sqmm'CU' WIRES IN CONDUIT
4X10+2X6 sq.mm Cu. WIRES IN CONDUIT
4X16+2X10SQMM Cu. WIRES IN CONDUIT
5X10sqmm'CU' WIRE IN 32mm∅ CONDUIT
5X16sqmm'CU' WIRE IN 32mm∅ CONDUIT

SUB HEAD-2 (DISTRIBUTION PANEL)

Supply, installation, testing and commissioning of following M.V. cubicle type totally enclosed, free standing type,
dust, damp and vermin proof. Distribution Board/Panel complete with busbars, M.V. danger notice plate,
connection of incoming and outgoing cables with thimbles, with complete fixing accessories as required. The rates
for the distribution boards apart from the Breakers and instruments shall also include the following:

This schedule of Quantities shall be read in conjuction with the technical specification, General & Special conditions
as well as all tender drawings.
Main LT Panel shall be confirm to IEC- 60439
Panel manufacturer should be ISO 9001 certified having CPRI (Central power research institute)/ ERDA(Electrical
research development authority) test report for Short circuit withstand of minimum 50KA rms for 1 second and
Temperature rise test.

Supporting rigid steel framework.

Cubicle type, 14 gauge CRCA sheet steel enclosed.

Complete with interconnections and distribution bus bars.

Proper bonding to earth.

Painting/lettering on Breakers and distribution boards, the location they serve, providing on each panel its circuit
diagram.

Providing cable clamps / supports within distribution boards cable alley.

TPN ACB’s / MCCB’s shall mean 3 pole ACB’s / MCCB’s with adequate size of neutral link .All 4 Pole ACBs should
have 100% neutral rating
All ACBs should have Ics=Icu=Icw for 1 sec for the fault level specified in BOQ. Manufacturer shall submit test
certificate for "Combined Sequence" as per IS/IEC60947 standards
All ACBs except bus couplers should be provided with microprocessor based protection release having inbuilt
adjustable protections for O/L, S/C & Earth Faults with LED display for Current metering, % Loading and Last 5 trip
data and RS-485 communication port.
Transformer and DG set ACBs shall be provided with RS 485 port for communication on BMS/SCADA.
Door Interlock and Mechanical operation counter to be provided for all ACBs
External Neutral CT shall be provided for all 3 Pole ACBs & MCCBs with microprocessor based release (with inbuilt
Earth Fault protection) to avoid nusiance tripping due to unbalanced loads.
All MCCBs should have Ics=100% of Icu
MCCBs upto 200A should be Thermal Magnetic type having O/L & S/C protections. All MCCBs above 200A shall
have microprocessor release with adjustable O/L, S/C & inbuilt E/F protections.
MCCBs above 63A ratings should be provided with Copper Spreader Links & Phase barriers
3 Pole power contactors should be AC3 duty for motor switching and AC1 for other resistive / Lighting loads. 4 Pole
contactors should be AC1 duty unless otherwise specified

All MCB’s shall be of minimum 10 KA breaking capacity or as required.

All motor feeders MCCBs / MPCBs shall be of motor duty.selected as per Type II coordination chart of
manufacturer

Distribution panels shall be Powder Coated with Siemens gray paint shade no. RAL-7032 of IS-5.with 60-80 micron
thickness.

Degree of protection for following type of distribution panel enclosure shall be as per IS:13947-1993.

IP 52 for indoor panels.

IP 55 for outdoor panels.

All MCCB’s shall be provided with operating mechanism for door interlock.

Current density of aluminium busbars shall be 1 A/sq mm and current density of copper shall be 1.6A/sq.mm

Tinned copper / GI earth bus as specified in the BOQ shall be provided through out the length of each board.

All measuring instruments (Meters) shall be of digital electronic with LED of approved make and compatible with
BAS.

All hinged door shall be earthed through 2.5 sq mm tinned braided copper wire.

All panels shall have provision of the following:

Pad locking of Switch board doors.

Pad locking of MCCB’s handles in “OFF” Position.

2NO + 2NC potential free contacts, connectors, contactors with wiring etc are to be provided for BAS including
space required for various transducers in all incomers sections. Only transducers shall be supplied by BAS
contractor.

All MCB’s used for protection of resistive and lightly inductive load shall be type “B” characteristic and inductive
(motor) load shall be of type “C” characteristic and discharge lamps and UPS etc. shall be of type D characteristic.

All incoming and outgoing air circuit breakers shall be placed on middle portion of the vertical in single tier
formation.

All PTs / control transformer shall be provided with center tap earth secondary.
Multifunction meter parameter shall be – Voltage , current, Power factor, Frequency , active Power, reactive power
& apperant power, Maximum demand indicator , unbalance voltage , unbalance current , RS485 port , % loading
harmonics.
All ATS shall be 4Pole.
This BOQ to be read with respect to SLD , in the event of any discerepency in the BOQ SLD & Technical
Specification details to be considered.

All ACBs shall be microprocessor based with LED display % loading last 5 trip data & RS-485 communication port.
KITCHEN PANEL#B2 INDOOR RATED (10 KA ,IP-55)
INCOMING
1 Nos.63A, 10 KA 4P Thermal magnetic Relese MCCB WITH Adjustable O/L, S/C &E/F protections .
Metering & Indication
1No.multifunction meter for measuring following electrical parameters, 1 No. 63/5 amps 5 VA CTs, Cl -1 • Current
WITH RS-485.

Phase indicating light shall be protected by 2 Amps SP MCB's. - 1 Set

ON / OFF/ TRIP indicating lights with control 2 Amps SP MCB's. - 1 Set
Numeric Relay as per Local regulation - 1Set
Surge Protection-1Set

BUSBAR
Electrolytic high conductivity aluminium three phase and neutral busbars rated at 100 amps having a maximum
current density of 1 amp per sq mm suitable to with stand symmetrical fault level of 15 kA at 415 V. The neutral
busbar is to be of same size as phases.
OUTGOING
2 No.32A,(30mA) 4P RCBO
3 No.20A, 10 KA DP MCB
6 No.20A, 10 KA SP MCB
KITCHEN PANEL#B2 -described as above

KITCHEN PANEL#B1 INDOOR RATED (15 KA ,IP-55)

INCOMING
1 Nos.250A, 15 KA 4P Thermal magnetic Relese MCCB WITH Adjustable O/L, S/C &E/F protections .
Metering & Indication
1No.multifunction meter for measuring following electrical parameters, 1 No. 250/5 amps 5 VA CTs, Cl -1 • Current
WITH RS-485.

Phase indicating light shall be protected by 2 Amps SP MCB's. - 1 Set

ON / OFF/ TRIP indicating lights with control 2 Amps SP MCB's. - 1 Set
Numeric Relay as per Local regulation - 1Set
Surge Protection-1Set

BUSBAR
Electrolytic high conductivity aluminium three phase and neutral busbars rated at 300 amps having a maximum
current density of 1 amp per sq mm suitable to with stand symmetrical fault level of 15 kA at 415 V. The neutral
busbar is to be of same size as phases.
OUTGOING
16 No.32A,(30mA) 4P RCBO
2 No.40A, 10 KA 4P MCB
KITCHEN PANEL#B1 -described as above

KITCHEN PANEL#GR.F INDOOR RATED (15 KA ,IP-55)

INCOMING
1 Nos.200A, 15 KA 4P Thermal magnetic Relese MCCB WITH Adjustable O/L, S/C &E/F protections .
Metering & Indication
1No.multifunction meter for measuring following electrical parameters, 1 No. 200/5 amps 5 VA CTs, Cl -1 • Current
WITH RS-485.

Phase indicating light shall be protected by 2 Amps SP MCB's. - 1 Set

ON / OFF/ TRIP indicating lights with control 2 Amps SP MCB's. - 1 Set
Numeric Relay as per Local regulation - 1Set
Surge Protection-1Set

BUSBAR
Electrolytic high conductivity aluminium three phase and neutral busbars rated at 300 amps having a maximum
current density of 1 amp per sq mm suitable to with stand symmetrical fault level of 15 kA at 415 V. The neutral
busbar is to be of same size as phases.
OUTGOING
12 No.32A,(30mA) 4P RCBO
1 No.63A, 10 KA 4P MCB
2 No.40A, 10 KA 4P MCB
KITCHEN PANEL#GR.F -described as above

KITCHEN PANEL#1ST.F INDOOR RATED (15 KA ,IP-55)

INCOMING
1 Nos.100A, 15 KA 4P Thermal magnetic Relese MCCB WITH Adjustable O/L, S/C &E/F protections .
Metering & Indication
1No.multifunction meter for measuring following electrical parameters, 1 No. 100/5 amps 5 VA CTs, Cl -1 • Current
WITH RS-485.

Phase indicating light shall be protected by 2 Amps SP MCB's. - 1 Set

ON / OFF/ TRIP indicating lights with control 2 Amps SP MCB's. - 1 Set
Numeric Relay as per Local regulation - 1Set
Surge Protection-1Set

BUSBAR
Electrolytic high conductivity aluminium three phase and neutral busbars rated at 100 amps having a maximum
current density of 1 amp per sq mm suitable to with stand symmetrical fault level of 15 kA at 415 V. The neutral
busbar is to be of same size as phases.
OUTGOING
6 No.32A,(30mA) 4P RCBO
3 No.20A, 10 KA DP MCB
4 No.20A, 10 KA SP MCB
2 No.15A, 10 KA SP MCB
KITCHEN PANEL#1ST.F -described as above

KITCHEN PANEL#9TH.F INDOOR RATED (15 KA ,IP-55)

INCOMING
1 Nos.100A, 15 KA 4P Thermal magnetic Relese MCCB WITH Adjustable O/L, S/C &E/F protections .
Metering & Indication
1No.multifunction meter for measuring following electrical parameters, 1 No. 100/5 amps 5 VA CTs, Cl -1 • Current
WITH RS-485.

Phase indicating light shall be protected by 2 Amps SP MCB's. - 1 Set

ON / OFF/ TRIP indicating lights with control 2 Amps SP MCB's. - 1 Set
Numeric Relay as per Local regulation - 1Set
Surge Protection-1Set

BUSBAR
Electrolytic high conductivity aluminium three phase and neutral busbars rated at 100 amps having a maximum
current density of 1 amp per sq mm suitable to with stand symmetrical fault level of 15 kA at 415 V. The neutral
busbar is to be of same size as phases.
OUTGOING
8 No.32A,(30mA) 4P RCBO
2 No.40A, 10 KA 4P MCB
KITCHEN PANEL#9TH.F -described as above
Cables, Terminations and Trays

Supply and laying of cable in Tray/clamped to wall with suitable clamps saddles and fixing bolts/ in ground and
including testing and commissioning of the following 1100 volt grade armoured XLPE insulated and sheathed
copper conductor armoured cable complete as required. The costs shall include for all cables to be provided with a
1D gap and shall be properly clamped with cable clamps and ties. Identification tags shall be provided for all cables
and route markers for cables in ground.
Power Cable
4CX 4Sqm
4CX 6Sqm
4CX 10Sqm
4CX 16Sqm

Cables, Terminations and Trays

Supplying and making terminal joints for the following size of 1.1 KV PVC insulated Copper conductor armoured
cables including providing heavy duty Copper terminal crimping lugs, solder, insulation tape, approved sealing
epoxy compound, double compression brass compression cable glands, effecting gland connections and effecting
terminal connections to the equipment complete as required.
4CX 4Sqm
4CX 6Sqm
4CX 10Sqm
4CX 16Sqm

Supply and laying of cable in Tray/clamped to wall with suitable clamps saddles and fixing bolts/ in ground and
including testing and commissioning of the following 1100 volt grade armoured XLPE insulated and sheathed
copper conductor armoured cable complete as required. The costs shall include for all cables to be provided with a
1D gap and shall be properly clamped with cable clamps and ties. Identification tags shall be provided for all cables
and route markers for cables in ground.
Earthing Cable
1CX 4Sqm - Armoured cable
1CX 6Sqm
1CX 10Sqm
1CX 16Sqm

Cables, Terminations and Trays

Supplying and making terminal joints for the following size of 1.1 KV PVC insulated Copper conductor armoured
cables including providing heavy duty Copper terminal crimping lugs, solder, insulation tape, approved sealing
epoxy compound, double compression brass compression cable glands, effecting gland connections and effecting
terminal connections to the equipment complete as required.
1CX 4Sqm - Armoured cable
1CX 6Sqm
1CX 10Sqm
1CX 16Sqm

Design, manufacture , supply and fixing of factory fabricated Perforated FRP cable tays, with radial bends, supports
and fixing hardware etc with of the following sizes as per specification. The rate shall also include for suitable
ready-made radial bends/reducers, necessary , support , supporting threaded rods, anchor fasteners etc. including
cutting, drilling holes, painting etc. as required.

300 MM WIDE CABLE TRAY

Runners 20 x 75 x 20 x 2.5 mm
Rungs 20 x 30 x 20 x 2.5 mm 250 mm C/C
Suspenders 32 x 32 x 4 mm GI angle 1800 mm C/C

150 MM WIDE CABLE TRAY

Runners 20 x 75 x 20 x 2.5 mm
Rungs 20 x 30 x 20 x 2.5 mm 250 mm C/C
Suspenders 32 x 32 x 4 mm GI angle 1800 mm C/C

SUB HEAD-3 KITCHEN DBS ( DISTRIBUTION BOARD )

Supply, erection, testing and commissioning of the following sheet steel clad wall recess mounting dust and vermin
proof constructed from 16 SWG sheet steel IP 42 construction, finished with rust proof red oxide coating and two
coats of paint with hinged gasket-ted door and housing the following complete with suitably rated PVC insulated
copper bus bars with interconnections and neutral bar assembly, earthing terminals, and with complete supports
as approved by Architects. Padlocking facility shall be provided on the door as per the details provided
below.NOTE- all UPS DBs MCBs shall be D curve ,please refer the SLD for the same.

8 way TPN
1-63 amp TPN 10 kA MCB with thermal magnetic protective releases incoming with 3 nos. single phase banks each
comprising of 1-63 amp DP 30 mA ELCB Sub incoming and 24 nos 6/10/16/20 amps SP 10 kA MCBs with thermal
magnetic protective releases out goings per phases.
1-40amp TPN 10 kA MCB with thermal magnetic protective releases incoming with 3 nos. single phase banks each
comprising of 1-63 amp DP 30 mA ELCB Sub incoming and 24 nos 6/10/16/20 amps SP 10 kA MCBs with thermal
magnetic protective releases out goings per phases.

6 way TPN
1-40 amp TPN 10 kA MCB with thermal magnetic protective releases incoming with 3 nos. single phase banks each
comprising of 1-63 amp DP 30 mA ELCB Sub incoming and 18 nos 6/10/16/20 amps SP 10 kA MCBs with thermal
magnetic protective releases out goings per phases.

SUB HEAD-4 (MCBs. ISOLATOR AND BOX)

Supply and fixing of the following sizes MCB DP isolators with Polymerized Box with wiring to IP65 in anticorosive
enclousers of suitable sizes. It shall be flushed / surface mounted, complete with making connections testing and
commissioning etc. Suitable rated earth connections complete as required.
20A DP MCB With box

Supply and fixing of the following sizes moulded plug (industrial type) socket with Polymerized Box plug top along
with wiring and suitable rating C series MCB confirming to IP65 in anticorosive enclousers of suitable sizes. It shall
be flushed / surface mounted, complete with making connections testing and commissioning etc. Suitable rated
earth connections complete as required.
5 pin 32A for 3 phase

Supply and fixing of the following sizes MCB 4P isolators with Polymerized Box with wiring to IP65 in anticorosive
enclousers of suitable sizes. It shall be flushed / surface mounted, complete with making connections testing and
commissioning etc. Suitable rated earth connections complete as required.
5 pin 20A 4P+E for 3 phase
5 pin 32A 4P+E for 3 phase

Sub Total
 RRP
Unit Kitchens qty. Rate Amount

Nos. 100.00 1,026.59 102,659.45

Nos. 250.00 586.49 146,622.63

- -

- -

Sets 1,709.42 -
Sets 2,450.79 -
Sets 3,193.12 -
Sets 3,935.44 -
Sets 6,277.62 -
Sets 7,010.50 -
- -

Nos. 20.00 1,946.47 38,929.37

- -

Nos. 70.00 1,038.87 72,721.05

 - -

- -

Nos. 25.00 3,074.12 76,852.93

Nos. 25.00 1,355.26 33,881.40

- -

Nos. 22.00 3,074.12 67,630.58

Nos. 22.00 1,355.26 29,815.63

- -

Nos. 18.00 3,528.39 63,510.97

Nos. 18.00 1,813.30 32,639.47
- -
- -
RMT 1,020 121.83 124,267.99
RMT 720 177.55 127,837.94
- -

- -

RM 850.00 180.39 153,328.08

RM 350.00 199.27 69,746.10
RM 350.00 283.33 99,165.07
RM 250.00 330.55 82,637.56
RM 500.00 528.88 264,440.18
RM RO 440.10
RM 300.00 717.77 215,329.86
RM 50.00 1,057.76 52,888.04
RM 50.00 821.65 41,082.67
RM RO 1,109.70
- -
- -

- -

- -
- -

- -

- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -

- -

- -

- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
 - -

- -

- -

- -
- -
- -
- -

- -

- -
- -

- -
- -
- -
- -
- -

- -

- -
- -
- -
- -
- -
- -

- -

- -
- -
- -
- -
Set 1 79,662.60 79,662.60
- -
- -
 - -
- -
- -

- -

- -
- -
- -
- -
- -
- -

- -

- -
- -
- -
Set 1 171,173.07 171,173.07
- -
- -
- -
- -
- -

- -

- -
- -
- -
- -
- -
- -

- -

- -
- -
- -
- -
Set 1 154,077.96 154,077.96
- -
- -
 - -
- -
- -

- -

- -
- -
- -
- -
- -
- -

- -

- -
- -
- -
- -
- -
Set 1 100,952.87 100,952.87
- -
- -
- -
- -
- -

- -

- -
- -
- -
- -
- -
- -

- -

- -
- -
- -
Set 1 113,129.40 113,129.40
- -
 - -
- -

- -

- -
Rmt RO 231.99
Rmt RO 337.12
Rmt 50.00 569.49 28,474.54
Rmt 50.00 817.88 40,893.78
- -
- -
- -

- -

Nos RO 643.16
Nos RO 648.82
Nos 1.00 619.55 619.55
Nos 1.00 713.99 713.99
- -

- -

- -
Rmt RO 35.89
Rmt RO 54.78
Rmt RO 121.83
Rmt RO 286.16
- -
- -
- -

- -

Nos RO 282.38
Nos RO 283.33
Nos 2.00 341.88 683.77
Nos 2.00 361.72 723.43
- -

- -

- -
- -
- -
- -
Rmt 20.00 1,115.64 22,312.71
- -
- -
- -
- -
Rmt 30.00 748.97 22,469.10
- -
- -

- -

- -

Nos 1.0 27,174.93 27,174.93

Nos 1.0 26,066.25 26,066.25

- -
- -

Nos 2.0 23,138.52 46,277.03

- -
- -
- -
 -
-
Nos. 38 3,872.16 147,142.07
- -

-
-
Nos. 23 8,216.53 188,980.28
- -

-
-
Nos. 7 21,721.87 152,053.10
Nos. 7 21,721.87 152,053.10
-
3,371,620