Scribd
Upload
207 views

Petronas Ambra Multi G 10W-30: Technical Data Sheet

PETRONAS Ambra MULTI G 10W-30 is a multi-purpose transmission oil developed for tractors, agricultural equipment, and construction machinery. It is suitable for use in gearboxes, rear transmissions, differentials, hydraulic systems, and power steering units. The oil meets specifications for API GL-4 and ISO VG 68, and is approved under CNH MAT 3525, NH 410B, and ZF TE-ML 03E, 05F, 17E, 21F. It has a viscosity index of 140, pour point below -40°C, and flash point of 210°C.

Uploaded by

Carlos Guerrero
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
207 views

Petronas Ambra Multi G 10W-30: Technical Data Sheet

PETRONAS Ambra MULTI G 10W-30 is a multi-purpose transmission oil developed for tractors, agricultural equipment, and construction machinery. It is suitable for use in gearboxes, rear transmissions, differentials, hydraulic systems, and power steering units. The oil meets specifications for API GL-4 and ISO VG 68, and is approved under CNH MAT 3525, NH 410B, and ZF TE-ML 03E, 05F, 17E, 21F. It has a viscosity index of 140, pour point below -40°C, and flash point of 210°C.

Uploaded by

Carlos Guerrero
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Technical Data Sheet

Revised: 2020/12/04 (version 1.0)

PETRONAS Ambra MULTI G


10W-30
Description and Applications

PETRONAS Ambra MULTI G is a multi-purpose transmission oil (U.T.T.O) developed in collaboration with NEW
HOLLAND for use on tractors, agricultural equipment and construction machinery.
Suitable for use in traditional tractor gearboxes, CVT, Power-Shift and Shuttle-Shift gearboxes, rear
transmissions with wet brakes, side final drives, wheel final drives, differentials, hydraulic hoists, drive pulley,
mechanical and hydrostatic drives, and power steering units.

Approvals, Specifications and Recommendations


Specifications:
• API GL-4
• ISO VG 68
Approvals:
• CNH MAT 3525
• NH 410B
• ZF TE-ML 03E, 05F, 17E, 21F
Note: Always consult your owner’s manual to check recommended viscosity grade and specifications for your specific vehicle

Typical Physical Data

Parameters Method Unit Typical Value


Appearance - - Bright & Clear
Colour ASTM D 1500 - L3
Density @ 15°C ASTM D 4052 g/cm3 0.875
Kinematic Viscosity @ 100°C ASTM D 445 mm2/s (cSt) 9.5
Viscosity Index ASTM D 2270 - 140
CCS Viscosity @ -25°C ASTM D 5293 mPa.s (cP) 6300
Pour Point ASTM D 97 °C <-40
Flash Point COC ASTM D 92 °C 210
Foam @ 24°C ASTM D 892 cc/s 0/0
All technical data is provided for reference only. These characteristics are typical of current production. Whilst future production will conform to PLI’s
specification, variations in these characteristics may occur.

Health, Safety and Environment


This product is unlikely to present any significant health and safety hazards when used in the recommended application. Avoid contact
with skin. Wash immediately with soap and water after skin contact. Do not discharge into drains, soil or water.
For further detail regarding storage, safe handling, and disposal of product, please refers to product SDS or contact us at: www.pli-
petronas.com

Important Note
The word PETRONAS, the PETRONAS logo and such other related trademarks and/or marks used herein are trademarks or registered
trademarks of PETRONAS Lubricants International Sdn. Bhd. (“PLISB”), or its subsidiaries or related Holding Corporation under license
unless indicated otherwise. The PLI Documents and the information contains herein is believed to be accurate as of the date of printing.
PLISB makes no express or implied representation or warranties as to its accuracy or completeness or information in or any transaction
performed. The PLI Documents information provided is based on standard tests under laboratory conditions and is given only as a guide.
Users are advised to ensure that they refer to the latest version of these PLI Documents. It is the responsibility of the users to evaluate and
use products safely, to assess suitability for the intended application and to comply with all applicable laws and regulations imposed by the
respective local authorities.
Safety Data Sheets are available for all our products and should be only be consulted for appropriate information regarding storage, safe
handling and disposal of the product. No responsibility shall be taken by either PLISB or its subsidiaries and related holding corporation for
any loss or injury or any direct, indirect, special, exemplary, consequential damages or any damages whatsoever, whether in action of
contract, negligence or other tortuous action, in connection or resulting from abnormal use of the materials and/or information, from any
failure to adhere to recommendations, or from hazards inherent in the nature of the materials and/or information. All products, services and
information supplied are under our standard conditions of sale. Please consult with any of our local representative in the event you require
any further information.
Code: 76176

www.pli-petronas.com

You might also like