Syr-line TMR48D

Digital Timer
Front Panel 48x48 (1/16 DIN)

› Large LED or LCD Screen (13.2 mm)

› Multi-function and single-function
› Basic & Advance configuration modes
› Multi-range (0.05 s – 9999 h)
› Multi-voltage (24-240 V AC/DC)
› 1 or 2 relay outputs (Changeover)
› Memory option in event of a break in supply
› Lock function
› Up or down timing
› DIN Sized (48x48 mm) Housing
› Compact body (63 mm long)
› Water & Dust-proof (IP66)
› 8-Pins & 11-Pins connections Standard Version Performance Version
(MDE1) (MDA2, MDF1, GDF1, GDS2)

Product Selection
Type Part Number Function Connections Output Supply Voltage Screen
MDE1 MDE1R0524U A, B, C, H, D, Di 8-Pins 1 x 5A 24 V AC/DC LCD
MDE1 MDE1R05MVA A, B, C, H, D, Di 8-Pins 1 x 5A 100-240 V AC/DC LCD
MDA2 MDA2R10MV2 A 8-Pins 2 x 10A 24-240 V AC/DC LED
MDF1 MDF1R10MV2 A, Ac, Ad, B, C, H, L, Li, D, Di 8-Pins 1 x 10A 24-240 V AC/DC LED
GDF1 GDF1R10MV2 A, Ac, Ad, B, C, H, L, Li, D, Di 11-Pins 1 x 10A 24-240 V AC/DC LED
GDS2 GDS2R10MV2 A, Ab, Ac, Ad, AMt, At, B, C, H, Ht, L, Li, T, W, D, Di 11-Pins 2 x 10A 24-240 V AC/DC LED

Function
A: ON-Delay Power Supply
E: Multifunction E MV2: 24-240 V AC/DC
F: Multifunction F Output Type MVA: 100-240 V AC/DC
S: Multifunction S R: Relay 24U: 24 V AC/DC

GD S 2 R 10 MV2
Type Output Quantity Output Power
MD: Digital 8-Pins 1: 1 Output 10: 10 A
GD: Digital 11-Pins 2: 2 Outputs 05: 5 A

Description:
The new Syr-line Digital Timers has higher precision and many programming features with the biggest screen ever seen in the timer relays’
market and the most intuitive programming for ease to use and fast configuration

For more information about the Syr-line TMR48D Digital Timer please visit www.crouzet.com.
Input Specifications
Description MDE1…24U MDE1…MVA GDF1 MDF1 MDA2 GDS2
100-240 V 24-240 V 24-240 V 24-240 V 24-240 V
Rated supply voltage Un 24 V AC/DC
AC/DC AC/DC AC/DC AC/DC AC/DC
Voltage supply tolerance -15 %, +10 %
AC supply voltage frequency 50 / 60 Hz +/- 5%
Galvanic isolation of supply / inputs No
Max power consumption @ Un 2.5 VA (VAC) 1 W (VDC)
Immunity to power micro cuts 10 ms

Timing Specifications
Description MDE1…24U MDE1…MVA GDF1 MDF1 MDA2 GDS2
IEC 1812-1: 0. 001 s to 9.999 s, 0.01 s to 99.99 s, 0.1 s to 999.9 s, 1 s to 9999 s , 1 s to 99 min 59
Specified time ranges (10)
s, 0.1 min to 999.9 min, 1 min to 9999min, 1 min to 99h 59 min , 0.1 h to 999.9 h, 1 h to 9999 h
Minimum control pulse duration IEC 1812-1: 1 ms or 20 ms selectable
Recovery time (after by de-energization) IEC 1812-1 : 120 ms Max
Repeatability -
IEC 1812 1: ≤ ± 0.03 % ± 20 ms (VDC) / 50 ms (VAC)
Setting Accuracy IEC 1812- 1: ≤ ± 0.03 % ± 20 ms (VDC) / 50 ms (VAC)
Temperature drift ≤ ± 0.03 % ± 20 ms (VDC) / 50 ms (VAC)
Voltage drift ≤ ± 0.03 % ± 20 ms (VDC) / 50 ms (VAC)

Output Specifications
Description MDE1…24U MDE1…MVA GDF1 MDF1 MDA2 GDS2

Contact arrangement 1 CO (SPDT) 1 CO (SPDT) 2 CO (SPDT)

250 VAC / 10 A resistive / 250 VAC / 10 A resistive /

Maximum switching voltage 250 VAC / 30 VDC
125 VDC / 0.3 A resistive 125 VDC / 0.3 A resistive

NO/NC: 2x10 A @ 40 °C 250 V

NO: 5A 250 VAC / 5 A 30 VDC
NO / NC: 10 A 250 VAC / 10 A AC / 2x10 A @ 40 °C 30 VDC
Switching current rate (resistive) - NC: 3A 250 VAC / 3 A 30
30 VDC NO / NC: 2x8 A @ 60 °C 250 V
VDC
AC / 2x8A @ 60 °C 30 VDC

NO: 1250 VA / 150 W – NC:

Maximum switching power (resistive) 2500 VA / 300 W 2 x 2500 VA / 2 x 300 W
750 VA / 90 W

Electrical life at nominal switching current 1x105 cycles NO 1x105 cycles (10 A 250 VAC 1x105 cycles (10 A 250 VAC
rate (resistive) 7x104 cycles NC resistive) resistive)

Minimum switching contact 10 mA / 12 VDC

Maximum rate (at max switching power) 360 cycles /hour
Mechanical life 10 x 106 cycles
Dielectric strength between open contacts 1 kV / 1 min / 1 mA / 50 Hz

Page 2 of 14
Insulation Specifications
Description MDE1…24U MDE1…MVA GDF1 MDF1 MDA2 GDS2
Rated Insulation voltage IEC 60664-1: 300 V
Insulation coordination IEC 60664-1: Overvoltage category III; pollution degree 2
Rated impulse voltage IEC 60664-1: 4 kV (1.2/50 μs)
Clearance / Creepage distances IEC 60664-1: 3 mm / 3.2 mm
Dielectric strength EN-61812-1: 2.5 kV / 1 min / 1 mA / 50 Hz
Insulation Resistance NFC 93 050: > 500 MΩ / 250 VDC / 1min

General Specifications
Description MDE1…24U MDE1…MVA GDF1 MDF1 MDA2 GDS2
4 digits per 4 digits per 4 digits per 4 digits per
4 digits per 4 digits per
value value value value
value value
Display 7 segments 7 segments 7 segments 7 segments
7 segments 7 segments
LCD with LCD with LCD with LCD with
LCD LCD
backlight backlight backlight backlight
Memory backup EEPROM (rewrite 1,000,000 times min, 40 years data hold min)
Casing 48x48 mm (1/16 DIN)
Mounting position All positions
Mounting Front panel, by clip
Mounting
Mounting base-mounted on socket
Housing material UL94: enclosure plastic type V0
Degree of protection (Front Face) IEC 60529: IP66 with front panel seal
Degree of protection (Housing) IEC 60529: IP20
Operating temperature IEC 60068-2: -10 °C to +60 °C
Storage temperature IEC 60068-2: -30 °C to +70 °C
Humidity IEC 60068-2-30: 93 % without condensation
IEC 60068-2-6: ±0.15 mm 10 Hz - 60 Hz
Vibration resistance
2 g 60 Hz - 150 Hz
IEC60068-2-27: 15 gn – 11 ms, 3 x 6 axis (Output non-energized)
Shock resistance
5gn – 11 ms, 3 x 6 axis (Output energized)
Drop to concrete floor IEC 60068-2-32: Height: 0.75 m
Weight Approx. 105 g (150 g with packing)

Page 3 of 14
Standards Specifications
Description MDE1…24U MDE1…MVA GDF1 MDF1 MDA2 GDS2
2014/30/EU: EMC,
EU Directives
2014/35/EU: Low voltage
Approvals / Marking CE, cULus Listed Industrial Control Equipment
Security standard IEC 60664-1: Insulation coordination for equipment within low-voltage systems
2015/863/UE: RoHS
Conformity with environmental directives 1907/2006: Reach
2012/19/UE: WEEE
IEC 61812-1: Specified time relays for industrial use
Product standard
UL 508 (60947-4-1): Industrial Control Equipment (NRNT- Industrial Control Switches)
Immunity to electrostatic discharges Level III Air +/-8 KV / Contact +/-6 KV
Immunity to radiated, radio-frequency, IEC61000-4-3: Level III, 10 V/m (80 MHz to 1 GHz) 80% AM (1 kHz), 3 V/m (1.4 to 2 GHz)
electromagnetic field 80% AM (1 KHz), 1 V/m (2 to 2.7 GHz) 80% AM (1 KHz)
IEC 61000-4-4: Level IV, direct +/-4 kV (power supply) / capacitive coupling clamp +/-2 KV,
Immunity to rapid transient bursts
(command input and outputs)
Immunity to shock waves on power supply IEC 61000-4-5: Level III, line-to-earth +/-2 kV / line-to-line +/-1 kV
Immunity to radiofrequency in common
IEC 61000-4-6: Level III, 10 Vrms (0,15 to 80 MHz) 80% AM (1 kHz)
mode
IEC 61000-4-11:
Industrial Class II, 0 % residual voltage during 1 cycle AC power ports, 70 % residual voltage
during 25/30 cycles AC power ports, 0 % residual voltage, 250/300 cycles AC power ports.
Immunity to voltage dips and breaks
Residential: 0 % residual voltage during 10 cycle AC power ports, 40 % residual voltage
during 10 cycles AC power ports, 70 % residual voltage during 10 cycles AC power ports, 0 %
residual voltage, 250/300 cycles AC power ports
EN55022 / CISPR22 Class B
AC/DC main port emissions
EN 55011 / CISPR11 Class B, Group 1
EN55022 / CISPR22 Class B
Radiated emissions
EN 55011 / CISPR11 Class B, Group 1

Page 4 of 14
Accessories
Socket for DIN Rail or Panel Socket for DIN Rail or Panel
Socket with Screw Terminal
Mount Mount

Plug-In 8-Pins Plug-In 11-Pins Plug-In 8-Pins

25 622 130 25 622 080 25 622 203

Solder Plug Solder Plug Socket with Screw Terminal

Plug-In 8-Pins Plug-In 11-Pins Plug-In 11-Pins

25 622 301 25 622 076 79 694 002

Page 5 of 14
Diagrams

Wiring Diagrams
MDE1…24U MDE1…MVA

MDF1 GDF1

MDA2 GDS2

Page 6 of 14
Dimensions in(mm)
Side View Front View

Mounting Panel Cut-Out

Page 7 of 14
Function Diagrams
Basic Time Chart Detailed Time Chart
FUNCTION A: On-Delay (Delay on make)
U

Start NOT USED

U

A
Reset
R2 TIMED R1/R2

R2 TIMED R1/R2
R2 INST R2

T R2 INST R2

T T T t T

FUNCTION A + Memory Option

U

Start NOT USED

U

Reset
R2 TIMED R1/R2
R1/R2
R2 TIMED
R2 INST R2
R2
T R2 INST
T T t1 t2

FUNCTION Ab: Delayed Interval

U

U
Start

Ab
Reset

R1 / R2
R2 TIMED R1/R2
R2 TIMED

R2 INST R2
R2 INST R2
T1 T2
T1 T2 T1 t T1 t T1 T2

FUNCTION Ab + Memory Option

U U

S Start

Reset

R2 TIMED R1/R2
R2 TIMED R1/R2

R2 INST R2 R2
R2 INST
T1 T2
T1 T2 T1 t1 t2 T1 t T1 T2 T1 T2

FUNCTION Ac: On/Off Delay (Delay on U

make/break)
U Start

S Reset

Ac R2 TIMED R1 / R2 R2 TIMED R1 / R2

R2 INST R2 R2 INST R2

T1 T2
T1 t2 T2 t1 t1 T1 t1 T1

Page 8 of 14
 FUNCTION Ac + Memory Option
U
U

Start
S

Reset

R2 TIMED R1 / R2 R1 / R2
R2 TIMED

R2 INST R2
R2 INST R2

T1 T2
t2A+t2B=T2 T1 t2 t2A t2B t t T1 t T1 T2 T1

FUNCTION Ad: Delay on Start U

U Start

S Reset

Ad R2 TIMED R1 / R2 R2 TIMED R1 / R2

R2 INST R2 R2 INST R2

T T t1 t1 T

FUNCTION Ad + Memory Option U

U
Start

S Reset

R2 TIMED R1 / R2 R2 TIMED R1 / R2

R2 INST R2 R2 INST R2

T T t1 t2 T

T=t1+t2

FUNCTION At: Summation Time Relay

U

U
Start

S
Reset

At R2 TIMED R1 / R2 R2 TIMED R1 / R2

R2 INST R2 R2 INST R2

t1 t2 T=t1+t2 t1 t2 T t1 t2
T=t1+t2

FUNCTION At + Memory Option U

U
Start

S
Reset

R2 TIMED R1 / R2
R2 TIMED R1 / R2

R2 INST R2 R2 INST R2

T=t1+t2 t1 t2 T=t1+t2 t1 t2 t1 t2 t1 t2

Page 9 of 14
 FUNCTION AMt: On-Delay (Delay on U
make, Total memory: one delay)
Start NOT USED
U

Reset

AMt R2 TIMED R1 / R2

R2 TIMED R1 / R2

R2 INST R2
R2
R2 INST
T=t1+t 2 t1 t2
t1 t2 T

T=t1+t2

FUNCTION B: One-Shot
U

U
Start

B
Reset

R2 TIMED R1 / R2
R2 TIMED R1 / R2

R2 INST R2
R2 INST R2
T
T T t t T

FUNCTION B + Memory Option

U
U

Start
S
Reset

R2 TIMED R1 / R2 R1 / R2
R2 TIMED

R2
R2 R2 INST
R2 INST
T=t1+t2
T T t t1 t2 T T

FUNCTION C: Off-Delay (Delay on break)

U

U
Start

S
Reset

C R2 TIMED

R2 INST
R1 / R2

R2
R2 TIMED
R1 / R2

R2 INST R2
T
T t t T

FUNCTION C + Memory Option

U
U

Start
S
Reset

R2 TIMED R1 / R2 R2 TIMED R1 / R2

R2
R2 INST
R2 INST R2
T=t1+t2 T t t1 t2 t T
T

Page 10 of 14
 FUNCTION H: Interval
U

U
Start NOT USED

R2 TIMED R1 / R2

H
Reset

R2
R2 INST
R1 / R2
R2 TIMED
T
R2
R2 INST
T t T t T

FUNCTION H + Memory Option

U

U
Start NOT USED

R2 TIMED R1 / R2
Reset

R2 INST R2 R2 TIMED R1 / R2

T
R2 INST R2

T t T t1 t2

FUNCTION Ht: interval summation time relay

U

U
Start

S
Reset

Ht R2 TIMED R1 / R2
R2 TIMED R1 / R2

R2 INST R2
R2 INST R2
t1 t2
T=t1+t2 T=t1+t2 t1 t2 T t1 t2

FUNCTION Ht + Memory Option

U

U
Start

S
Reset

R2 TIMED R1 / R2
R2 TIMED R1 / R2

R2 INST R2
R2 INST R2

t1 t2
T=t1+t2 T=t1+t2 t1 t2 t1 t2 t1 t2

FUNCTION L: Recycler (OFF Start)

U

U
Start NOT USED

R2 TIMED R1 / R2

L
Reset

R2
R2 INST R2 TIMED
R1 / R2

T1 T2 T1 T2 R2
R2 INST
T1 T2 T1 T2 T1 T1 T2 T1 T1

Page 11 of 14
 FUNCTION L + Memory Option
U

U
Start NOT USED

R2 TIMED R1 / R2
Reset

R2
R2 INST R1 / R2
R2 TIMED

T1 T2 T1 T2 R2
R2 INST
T1 = t1 + t2 T1 T2 T1 T2 t1 t2 T2 T1 T1 t

FUNCTION Li: Recycler (ON Start)

U

U
Start NOT USED

R2 TIMED R1 / R2
Reset

Li R2 INST
R2

T1 T2 T1 T2
R2 TIMED
R1 / R2

R2
R2 INST
T1 T2 T1 T2 t T1 T2 T1 t T1

FUNCTION Li + Memory Option

U

U
Start NOT USED

R2 TIMED R1 / R2
Reset

R2 INST R2 R2 TIMED R1 / R2

T1 T2 T1 T2
R2
R2 INST
T1 = t1 + t2 T1 T2 T1 T2 t1 t2 T2 T1 t T1 t

FUNCTION T: On-Delay (Delay on make):

U
sum of times
Start
U

Reset

T R2 TIMED
S
R1 / R2 R2 TIMED R1 / R2

R2 INST R2
R2 INST R2
T = t1 + t2 + t3 t1 t2 t3 t1 t1 t2 t3
T = t1 + t2 + t3 t1 t2 t3

FUNCTION T + Memory Option

U

U
Start

S
Reset

R2 TIMED R1 / R2 R2 TIMED R1 / R2

R2 INST R2 R2 INST R2

T = t1 + t2 + t3 t1 t2 t3 T = t1 + t2 + t3 t1 t2 t3 t1 t2A t2B t3
t2 = t2A + t2B

Page 12 of 14
 FUNCTION W: Timing after pulse of control
U
contact
Start
U

Reset

W S

R2 TIMED R1 / R2 R2 TIMED R1 / R2
R2 INST R2
R2 INST R2
T t T t T
T

FUNCTION W + Memory Option

U

U
Start

S
Reset

R2 TIMED R1 / R2
R2 TIMED R1 / R2

R2 INST R2 R2 INST R2
T
T1 = t1 + t2 T t t1 t2 T

FUNCTION D: Symmetrical flashing (OFF

U
start)
Start NOT USED
U

Reset

D R2 TIMED

R2 INST
R1 / R2

R2
R2 TIMED
R1 / R2

R2
T T T T R2 INST

T T T T T T T T T1

FUNCTION D + Memory Option

U

U
Start NOT USED

R2 TIMED R1 / R2
Reset

R2 INST R2 R2 TIMED R1 / R2

T T T T
R2
R2 INST
T = t1 + t2 T T T T t1 t2 T T T t

FUNCTION Di: Symmetrical flashing (ON

U
start)
Start NOT USED
U

Reset

Di R2 TIMED

R2 INST
R1 / R2

R2

T T T T
R2 TIMED

R2 INST
R1 / R2

R2

T T T T t T T T t T

Page 13 of 14
 FUNCTION Di + Memory Option
U

U
Start NOT USED

R2 TIMED R1 / R2
Reset

R2 INST R2 R2 TIMED R1 / R2

T T T T
R2 INST R2

T = t1 + t2 T T T T t1 t2 T T t T t

Keys Function
Set Time Check Configured Time and Function

Reset Time Programming Mode

Page 14 of 14
Programming Mode
Programming Main Menu
# Parameter Value

1 0000
Pass
If "Lock" function is on, pass needs to be entered

2
Basic Prog
Enter to Basic Programming Mode

3
Advanced Prog
Enter to Advanced Programming Mode

4
Test
Enter to Test Mode

Basic Prog Menu

# Parameter Value

A Ab Ac Ad AMt At B C
1 Function
Select the timing function
H Ht L Li D Di T W

2 -.---s --.--s ---.-s ----s --m--s

Time Range
Select the timing range
---.-m ----m --h--m ---.-h ----h

3 Count Up Down
Select the timing count up or down

4 Off On
Memory
Activate memory option (save timing after power off)

5
Output 2 Timed Instantaneous
Select if Out 2 works timed or instantaneous (MDA2, GDS2)

Advanced Prog Menu

# Parameter Value

1 PNP NPN
Input Type
Select input to work with a NPN or PNP signal

2
Time Change Now End
Select if a timing change will be applied during current cycle
(Now) or at the end of it (End)

3 9999 0000
Time Limit
Select upper time limit

Page 15 of 14
 4 100% 50%
Brightness
Select screen brightness

5 Off 5s 10s 30s 60s

Sleep After
Select the time needed to turn off the screen

6
Lock Off 1 2
Select security level 1 (lock configuration) or 2 (lock all)

6.1 0000
Pass
Set password for lock option

6.2
Done
Indication that the lock is on

7 Default Settings No Yes

Reset settings to default values

7.1 No Yes
Sure
Confirm if reset settings to default values

7.2
Done
Indication that settings have been reset

Test Mode Menu

# Parameter Value

1 Out 1 Off On
Turn on/off Relay Output 1

2
Out 2 Off On
Turn on/off Relay Output 2 (MDA2, GDS2)

3
Display Off On
Turn on/off all display segments

4
Memory Off Test
Test the memory of the timer

4.1
Good
Indication that the memory is working properly

4.2
Error
Indication that the memory is not working properly

All specifications in this document are subject to change without written notice. Actual product may differ from pictures provided in this document.

Page 16 of 14