Scribd
Upload
325 views1 page

RC - 2

SABIT RC-2 is a cold applied, rapid curing cutback asphalt product made from bitumen and petroleum distillates. It is easy to apply without thinning or heating. Workers should wear protective equipment during application due to its low flash point and adequate ventilation is needed. SABIT RC-2 can be used for pavement construction and maintenance per MOT specifications. It is applied using spray equipment and the coverage rate depends on the surface porosity.

Uploaded by

miguel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
325 views1 page

RC - 2

SABIT RC-2 is a cold applied, rapid curing cutback asphalt product made from bitumen and petroleum distillates. It is easy to apply without thinning or heating. Workers should wear protective equipment during application due to its low flash point and adequate ventilation is needed. SABIT RC-2 can be used for pavement construction and maintenance per MOT specifications. It is applied using spray equipment and the coverage rate depends on the surface porosity.

Uploaded by

miguel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

SABIT RC - 2

(RAPID CURING CUT-BACK ASPHALT COMPLIES WITH MOT


Specification for Road and Bridge Construction Table 2 of section 4.04)
Introduction Health & safety
SABIT RC-2 is a cold applied rapid curing cutback product made from Workers should wear protective gloves and goggles during
the best ductile bitumen and quick drying petroleum distillates. It is application. SABIT RC-2 contains volatile solvent and have low
easy to apply and it doesn't need thinning or heating. flash point. Care must be taken to ensure that there is adequate
ventilation in the working place. Fires and naked flames should
Uses and Application be kept at a distance.
SABIT RC-2 is suitable for use in the construction & maintenance
of pavement as designated on MOT specification. SABIT RC- 2 is
Packing & Storage
applied to asphalt or granular surfaces using truck mounted SABIT RC-2 can be supplied in bulk, drums and cans. Store in dry
spray equipment. and shaded area in original packing. The container should be
kept covered while working in order to prevent the evaporation
Coverage of solvent
For prime coats the usage rate is 0.4-1.4 L/m2 and for tack coats,
0.2-0.4 L/m2 depending on the porosity of the prepared soil or
road surface/pavement respectively.

TECHNICAL DATA Ref F05-21 Issue 1 RC January 2020

PROPERTIES MIN MAX TEST METHODS

Saybolt Furol Viscosity at 60 °C, sec 100 200 AASHTO T72 & ASTMD 88

Flash Point (Tag Open Cup), °C 27 - AASHTO T72 & ASTM D 3143

Distillation
Distillate, vol % of total distillate to 360 °C
AASHTO T 78 & ASTMD 402
to 225 °C 40 -
to 260 °C 65 -
to 316 °C 87 -

Residue from distillation at 360 °C 67 -


% (volume by difference)

Tests on residue from distillation 80 120 AASHTO T 49 & ASTMD 5


Penetration at 25 °C, 0.1 mm
100 - AASHTO T 51 & ASTMD 113
Ductility at 25 °C, cm
Solubility in trichloroethylene, % 99.5 - AASHTO T 44 & ASTMD 2042

Note:
Saudi Bitumen Industries Co. Ltd.(SABIT) may modify the technical data sheet without prior notice.

90
Industrial City No3 ,P.O. Box: 260167, Riyadh 11342 +966 11 2652602 - 2651113 +966 11 2652524
[email protected] | [email protected] www.saudibitumen.com

You might also like