www.juhuico.

com

-BFT
1.Hold button 1 and press button 2 four times ,then release both buttons,the 3.Press and retain pressed the button of the original remote control
Best position for duplication led of SKY emits a quick flash every 2 sec. that you want to copy until the remote's led will turn on with a fix light
and then emits a double flash every 2 sec.
2.Place the original remote control in front of the remote, at about 2-3 cm of
distance 4.Press and retain pressed once again the same button of the original
3.Press and retain pressed the button of the original remote control that you remote control.
want to copy until the remote's led will turn on with a fix light and then emits a 6.Now the LED will flash quickly, press the button of the remote where
double flash every 2 sec. you want to store the code just copied, until the LED will turn off.
4.Transmit now the seed code of the original remote control (by pressing the 5.Now activate the procedure to insert the new remote control
rear hide button or the buttons 1 and 2 simultaneously in the new models) on the receiver.
5. Now the LED will flash quickly, press the button of the remote where you
Auto-scan Type want to store the code just copied, until the LED will turn off. ACM TX2, TX2 COLOR, TX4
6.Now activate the procedure to insert the new remote control on ADYX TE4433H BLUE, 433-HG BRAVO
Multi-frequency the receiver.
AERF
COMPACT, HY-DOM, MERCURI B, MERCURI C, SABUTON, MARS,

Face to face copy -FAAC and GENIUS SATURN, ST3/N, TERRA, TMP-1, TMP-2, UNITECH
ATTENTION, PLEASE: Verify that the remote control to be copied is a ALLMATIC BROWN, BROWN RED, BRO.OVER, PASS, MINIPASS, TECH3
Up to 4 different remotes in 1 MASTER.
Pressing any button, the LED should issue a double flash rather than switch
APERIO GO, GO PRO, GO MINI

PROGRAMMING:
APERTO TX02-434-2,TX02-868-2 BLUE,4025 TX02-868-2,4022 TX02-434-2, 4020-
on immediately as a fixed light. (Sommer) TX03-434,TX-03-868-4,4013,TX03-434-4
1.Hold button 1 and press button 2 four times APRIMATI
-standard TR2/TR4, TM4, TXM
2.Place the original remote control in front of the remote, at about 2-3 cm of C
1.Hold button 1 and press button 2 four times ,then
distance ATA PTX4 BLUE, PTX4 PINK
release both buttons, the led of SKY emits a quick flash
3.Press and retain pressed the original remote control button that you want to AVIDSEN 104251, 104250, 104250 OLD, 104250 RED, 104257, 104350, 654250
every 2 sec.
copy until the LED SKY switches on a fixed light and then It stars to emit a
2.Place and press the original remote control in front of BALLAN FM400, FM400E,FM404B,4013
double flash every 2 seconds.
the remote , at about 2-3 cm of distance,until the led of TO. GO. WV, TWV, ROLLKEY, APPLE, LOT WCV, CUPIDO, TO.GO. QV, IO,
SKY starts flash quickly. 4.Predispose the FAAC/GENIUS remote control for the emission of the seed BENINCA
LOT2WCV,LOT1W,LOT2W,LOT4W,LOT1WM,LOT2WM, T2W,T4W,APPLE
3.While the LED of SKY is flashing, press the button of code (by pressing simultaneously the buttons 2 and 3)
5.While the FAAC/GENIUS LED is flashing, place it in front of the SKY, at about BESIDE BEZAP,HIT
the SKY where you want to store ,the remote'code just
2-3 cm of distance and press the button that you want to copy until the remote’s MITTO, MITTO M ( MITTO2M/MITTO4M), MITTO RCB (MITTO
copied, until the led will turn off. BFT RCB02/RCB04), MITTO A (MITTO 2A/MITTO 4A), MITTO B,
Note: led will change frequency of flashing (faster than before), as confirm of the TRC(TRC2/TRC4), GHIBLI, MURALE, KLEIO,TE01,TE02,TE04,RB4
To duplicate a second button, repeat the operation from correct copy of the code. MURALE
the point 1. -V2 CAME T431,T434,TOP432A,TOP434A,TOP432,TAM432SA,TOP432NA
1.Hold button 1 and press button 2 four times ,then release both buttons,the TRQ S449 (TRQ449100/TRQ449200/TRQ449300/TRQ449400), TRQ S449
led of SKY emits a quick flash every 2 sec. CARDIN GREEN (PRECODE), TXQ S449 (TXQ449200/TXQ449300/TXQ449400),
2.Place the original remote control in front of the remote, at about 2-3 cm of TXQ S449 GREEN, TRQ S486 (TRQ486200/TRQ486400), TXQ S486
distance (TXQ486200/TXQ486400), S437 TX, XRADO,S449,S476TX2,S476TX, S486
CASALI JA33 AMIGO, GENIUS/CASALI A252RC

AMC:Automatic matching code

Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device
can be used in portable exposure condition without restriction.