Personal Care

Formulary

For more details please contact:

AMERICAS Elementis Specialties
469 Old Trenton Road
East Windsor
New Jersey 08512
Tel: +1.609.443 2500
Fax: +1.609.443.2446

EUROPE Elementis GmbH

Stolberger Strasse 370
50933 Cologne
Germany

p u re i n c o s m e t i c s
Tel: +49.221.2923.2000
Fax: +49.221.2923.2011
 SOOTHING AFTER SHAVE BALM F-1003-01
A Water 74.50
Bentone® LT (Elementis Specialties) 0.60
B Glycerin 3.00
Disodium EDTA 0.10
Bisabolol (BASF) 0.10
Propylene Glycol 2.00
Spectrastat (INOLEX) 1.00
Panthenol 0.10
C FANCOL® POLYISO® 200-CG (Elementis Specialties) 8.00
MULTIPLE HYDRATION COMPLEX (Elementis Specialties) 2.00
PEG-40 Hydrogenated Castor Oil 0.60
Cetyl Alcohol 2.00
Meadowlactone ® (Elementis Specialties) 1.00
Fancol® CH 0.10
Emulsifying Wax 4.00

Procedure:
1. Combine phase “A” ingredients and begin heating to 80°C with propeller mixing. Mix for 15 minutes until
Bentone LT is completely hydrated.
2. Add phase “B” to phase “A” . Mix with moderate speed propeller mixing.
3. Heat phase “C” to 80°C and add to phase “A/B” with propeller mixing.
4. Begin cooling batch to room temperature.

Before using any of our products, please consult our Safety Data Sheets.

The information in this publication is, to the best of our knowledge, true and accurate, but since the conditions of use are beyond
our control, no warranty is given or to be implied in respect of such information. In every case, caution must be exercised to avoid
violation or infringement of statutory obligations and any rights belonging to a third party. We are, at all time, willing to study
customers’ specific outlets involving our products in order to enable their most effective use.

©Copyright 2013, Elementis Specialties, Inc.

All rights reserved.

Copying and/or downloading of this document or information therein for republication is not allowed unless prior written agreement
is obtained from Elementis Specialties, Inc.
®Registered trademark of Elementis Specialties, Inc.

12
p ure in c o sme ti cs
 11
Contents
SENSITIVE SKIN SHAVE CREAM F-1002-01 SKIN CARE
Daily UV Protecting Lotion 1
A Water 68.50
Tetrasodium EDTA 0.10 Hydrating Serum 1
B Glycerin 4.00 Soothing Eye Hydration Creme 2
Bentone® LT (Elementis Specialties) 0.50 Anti-Aging Night Cream 3
Aloe Barbadensis Leaf Juice 2.00 Anti-Aging Lip Balm 3
C Triethanolamine 0.50 Water In Oil Inorganic Suncream 4
Sodium Hydroxide, 50% solution 0.15 Moisturizing Body Cream 5
D Stearic Acid 10.00
Natural Hand & Foot Cream 5
Emcon SUN (Elementis Specialties) 4.00
Palmitic Acid (Alzo) 1.75
Fancol® VB (Elementis Specialties) 2.00 HAIR CARE
Meadowlactone ® (Elementis Specialties) 2.00 Curl Enhancing Repairing Cream 6
Tween 60 (Croda) 1.00 Shine Spray 6
Lipomulse 165 (Lipo Chemicals) 1.20
E Meadowquat® HG-70 (Elementis Specialties) 1.00
COLOR COSMETICS
Spectrastat E 1.00 CC Cream 7
Fragrance (Trilogy Fragrances) 0.30 BB Cream 8
Procedure: Oil Based Eye Shadow 9
1. Combine phase “A” ingredients and heat to 85°C with propeller mixing while cover to reduce water loss. Moisturizing Lipstick 9
2. Premix phase “B” ingredients and add to phase “A” with moderate speed propeller mixing.
Mascara 10
3. Add phase “C” to combined phase “A/B” and mix until clear and uniform.
Lip Gloss 10
4. Heat phase “D”° ingredients to 85°C and add to main batch with moderate speed propeller mixing. Hold tem-
perature at 85 C for 10 minutes while mixing.
5. Begin cooling batch
MENS CARE
6. At 50°C, add phase “E” ingredients to batch.
7. Continue mixing with propeller until batch reaches room temperature. Sensitive Skin Shave Cream 11
Soothing After Shave Balm 12
Viscosity: RV T-E @ 20rpm: 78,500cps pH: 7.14

MEADOWLACTONE® reduces
the coefficient of friction,
provides moisturization and
contributes a luxurious skin feel
for a smooth, comfortable shave.
 1

DAILY UV PROTECTING LOTION S-1000-01 LONG WEAR MASCARA KR10/22

A KF-6038 (Shin Etsu) 3.00
A Water 52.75
SPD-T5 (Shin Etsu) 20.00
BENTONE® LT (Elementis Specialties) 0.75
SPD-Z5 (Shin Etsu) 10.00
FANCOL® Abyshea (Elementis Specialties) 2.00
Rheoluxe® 8015 FANCORSIL® LIM-1 (Elementis Specialties) 3.00
disperses quickly B Luviskol VA64 (BASF) 8.00
Beeswax 1.00
in water with Triethanolamine 1.00
Finsolv TN (Innospec) 8.00 standard mixing. Preservative qs
B Deionized Water 52.00 It can be added C FANCOL® POLYISO® 275-CG (Elementis Specialties) 2.00
Sodium Chloride 0.50 at any point in
Sunchroma Black Iron Oxide (Sun Chemicals) 6.00
Euxyl K701 (Schulke & Mayr) 1.00 the emulsion
Copernicia (Carnauba) Wax (Koster Keunen) 5.00
Glycerin 3.00 process.
Beeswax (Azelis) 5.00
C Rheoluxe® 8015 (Elementis Specialties) 1.50
Cutina MD (BASF) 5.00
Procedure:
Snow White Pet USP (Calumet) 4.00
1. Heat phase A ingredients to 60°C with propeller mixing.
Euphorbia Cerifera (Candelilla) Wax (Koster Keunen) 3.00
2. Combine phase B ingredients and mix until uniform. Heat phase B to 60°C,
Stearic Acid 2.00
3. Very slowly, add phase B to phase A with moderate speed propeller mixing.
Tween 20 (Croda) 2.50
4. Cool to room temperature under slow sweep mixing.

Procedure:
Viscosity: RV T-E @ 20rpm: 28,000cps
1. Premix Red 6 Lake with FANCOR® Abyssinian Oil until pigment is completely wetted and dispersed with no
agglomerations.
HYDRATING SERUM F-1000-01 2. Heat Phase B to 85°C and mix until homogeneous.
A Deionized Water 75.00 3. At 85°C combine pigment premix Phase A and Phase B until thoroughly uniform.
Butylene Glycol 3.00 Cool to 65°C and fill into molds or appropriate packaging.
Sodium Chloride 0.50
B Multiple Hydration Complex (Elementis Specialties) 3.00 LIP GLOSS KR9/1
Dow Corning 245 Fluid (Dow Corning) 4.50
Dow Corning 200 Fluid 10cts (Dow Corning) 4.50 A BENTONE GEL® ABO V (Elementis Specialties) 3.50
®
Abil EM90 (Evonik) 2.00 MEADOWESTOLIDE (Elementis Specialties) 3.00
KF6017 (Shin Etsu) 1.00 Snow White Pet (Calumet) 12.90
Crodamol ISNP-LQ (Croda) 3.00 Colorona Red Brown (EMD) 7.50

Fancorsil A (Elementis Specialties) 2.00 Syncrowax HGLC (Croda) 2.00

C Euxyl K701 (Schulke & Mayr) 1.00 Iron Oxide Yellow 0.30

Rheoluxe® 8015 (Elementis Specialties) 1.50 Preservative qs

Cucumber Extract 0.50 B FANCOR® Abyssinian Oil (Elementis Specialties) 64.60
Procedure: Red 6 Lake (Sun Chemicals) 0.60

1. Combine phase A ingredients with propeller mixing. Heat to 70°C. Red 7 Lake (Sun Chemicals) 0.60
2. Combine phase B ingredients and heat to 70°C with propeller mixing.
3. Slowly, add phase A to phase B with moderate speed propeller mixing. Procedure:

4. Cool to 45°C and add phase C ingredients to batch. 1. Heat Phase A to 85°C and mix.
2. Add premixed Phase B and mix.
5. Cool to room temperature with mixing.
3. Cool to 55°C and fill.

Viscosity: RV T-E @ 20rpm: 28,500cps

10
 9

OIL BASED EYE SHADOW C-2000-02 SOOTHING EYE HYDRATION CREME F-1001-01
®
A FANCOL ID-CG (Elementis Specialties) 43.80
BENTONE GEL® ISD V (Elementis Specialties) 10.00 A FANCOR® ABYSSINIAN OIL (Elementis Specialties) 4.00
Hydrogenated Coco Glycerides 10.00 MULTIPLE HYDRATION COMPLEX (Elementis Specialties) 2.00
Ozokerite 8.00 Sweet Almond Oil 4.00
Carnauba Wax 5.00 Botanisil CPM-10 (Botanigenics) 2.00
Beeswax 2.00 Botanisil PD 151 CS (Botanigenics) 2.00
Propylparaben 0.20 Abil EM90 (Evonik) 1.60
B Sun Prizma Concord Crush (Sun Chemical) 10.00 Botanisil DM90 (Botanigenics) 1.60
Timiron Pearl Flake (EMD) 5.00 Xiameter 245 Fluid (Dow Corning) 7.00
Nylon-12 1.00 Citrol PG32IS LQ (Croda) 2.00
C ®
Rheoluxe 880 (Elementis Specialties) 5.00 Crodamol ISNP (Croda) 1.50
B Deionized Water 59.80
Procedure: Glycerin 3.00
1. Combine Phase A and heat to 75-80°C. Butylene Glycol 2.00
2. Mix Phase A togther using a Silverson Homogeniser. Sodium Chloride 0.50
3. Add Phase B and continue to mix for 15 minutes. C Euxyl K701 (Schulke & Mayr) 1.00
4. Transfer product to a stirrer. Neutrazen (Lucas Meyer) 1.00
5. Add Phase C at 1000rpm. Chamomile PB (Bio-Botanica) 1.00
6. Increase speed to 2000rpm and mix for 10 minutes. Green Tea Extract (Bio-Botanica) 1.00
7. Pour off and allow to cool. Cucumber Extract (Bio-Botanica) 1.00
Rheoluxe® 8015 (Elementis Specialties) 2.00
MOISTURIZING CREAM LIPSTICK Procedure:
C-1000-01 1. Heat phase A and phase B to 70°C separately.
A Red 6 Lake CI 15850:2 (Sun Chemicals) 6.00 2. Very slowly, add phase B to phase A with moderate speed propeller mixing.
FANCOR® Abyssinian Oil (Elementis Specialties) 25.00 3. Cool to 40°C with slow mixing.
B EMCON® CO (Elementis Specialties) 22.85 4. Add phase C ingredients to batch. Mix until uniform.
Copernicia Cerifera (Carnauba) Wax (Koster Keunen) 4.00 5. Cool to room temperature.
Euphorbia Cerifera (Candelilla) Wax (Koster Keunen) 6.30
Beeswax (Strahl & Pitsch) 2.00 Viscosity: RV T-E @ 20rpm: 50,750cps

C12-15 Alkyl Benzoate (Innospec) 7.75

Multiwax 180-W (Sonneborn) 5.60
BENTONE GEL® TN V (Elementis Specialties) 10.00
Talc (US Cosmetics Corp) 5.00
Mica S-12 (Kobo) 2.00
MEADOWESTOLIDE (Elementis Specialties) 3.00 Rheoluxe® 8015 is a Polyether Polyol
Euxyl K701 (Schulke & Mayr) 0.50
associative thickener. It shows excellent
Procedure:
1. Premix Red 6 Lake with FANCOR® Abyssinian Oil until pigment is completely wetted and dispersed with no viscosity build in silicone based systems.
agglomerations.
2. Heat Phase B to 85°C and mix until homogeneous.
3. At 85°C combine pigment premix Phase A and Phase B until thoroughly uniform.
4. Cool to 65°C and fill into molds or appropriate packaging.
2
 3

ANTI-AGING NIGHT CREAM BY-3129-88 LIGHT MOISTURIZING BB CREAM WITH SPF 30++ BY 3129-92
A BENTONE GEL® VS-5 PC V (Elementis Specialties) 5.60
A ANTI-AGING SKIN COMPLEX (Elementis Specialties) 5.00
THIXCIN® R (Elementis Specialties) 1.50
FANCOR® MEADOWFOAM SEED OIL (Elementis Specialties) 3.00
Abil EM90 (Evonik) 3.50
BENTONE GEL® MSO V (Elementis Specialties) 3.00
KF6017 (Shin Etsu) 2.00
AFRICAN HYDRATION COMPLEX (Elementis Specialties) 3.00
FANCOL® POLYISO® 275 CG (Elementis Specialties) 1.50
Tegosoft DEC (Evolik) 6.00
ANTI-AGING SKIN COMPLEX (Elementis Specialties) 3.00
Abil EM90 (Evolik) 3.00 ®
FANCOR ABYSSINIAN OIL (Elementis Specialties) 3.00
Beeswax (Strahl & Pitsch) 0.50
Beeswax (Strahl & Pitsch) 1.00
B Deionized Water 72.00
Wickenol 151 (Alzo Inc) 4.50
Sodium Chloride 0.50
Crodamol ISNP-LQ (Croda) 4.50
Germaben II (Ashland) 1.00
Finsolv TN (Innospec) 1.35
Glycerin 3.00
NANOX 200 (Elementis Specialties) 1.65
C Color qs
B Water 37.23
Fragrance qs
Glycerin 3.00
Procedure:
Tween 20 (Croda) 2.00
1. Heat phase A ingredients to 70-75°C with propeller mixing.
Butylene Glycol 3.00
2. Combine phase B ingredients and mix until uniform. Heat phase B to 70-75°C,
Sodium Chloride 1.00
3. Very slowly, add phase B to phase A with Silverson homogenization.. Mix for 10 minutes.
C TNP50T7 (Kobo) 10.00
4. Transfer to propeller mixing and cool to 40°C.
FAS70USI-E (Kobo) 6.00
5. Add phase C ingredients and cool to room temperature under slow sweep mixing.
FAS55ERSI-E (Kobo) 0.81
FAS50EYSI-E (Kobo) 3.26
Viscosity: RV T #7@ 10rpm: 65,000cps
FAS60EBSI-E (Kobo) 0.10
pH: 6.50
Preservative qs
ANTI-AGING LIP BALM KR 10/9
Procedure:
A ANTI-AGING SKIN COMPLEX™ (Elementis Specialties) 22.50 1. Premix Part A and Part B separately and heat to each 75°C.
Castor Seed Oil 46.90 2. Add Part B into Part A with higher share for 10-15 minutes.
Beeswax 9.00 3. Premix Part C and slowly add into Part A & B and cool down to 50oC-55oC.
Candelilla Wax (Koster Keunen) 6.30 4. Transfer to Silverson Homogenizer for 1-3 minus, until the pigments fully dispersed
Carnauba Wax (Koster Keunen) 5.30 5. Transfer to a propeller mixer and cool down to below 40°C.
FANCOL® POLYISO® 300-CG (Elementis Specialties) 10.00 6. Add Part D to the batch and mix well.
B Preservative qs
Viscosity: 18300 cps (RV Spindle #6, 20 rpm, 30s, 22oC)

Procedure:
1. Heat phase A to 80°C and mix until uniform.
2. Add phase B and mix. well
3. Poor into mold and allow to cool.

8
 7
CC CREAM MULTIFUNCTIONAL HYDRATOR C-1001-01 WATER IN OIL INORGANIC SUNCREAM KR 8/104
A Sodium Chloride 1.00
Glycerin 2.00 A BENTONE GEL® IHD V (Elementis Specialties) 8.00
®
B BENTONE GEL ABO V (Elementis Specialties) 6.45 Tegosoft OS (Evonik) 13.50
Imwittor 600 (Sasol) 3.00 FANCOL® IH (Elementis Specialties) 8.00
Ethylhexyl Methoxycinnamate 7.50 Tegosoft M (Evonik) 5.00
Tocopheryl Acetate 0.10 Abil EM90 (Evonik) 1.80
AFRICAN HYDRATION COMPLEX 3.00 Isolan GO 33 (Evonik) 1.75
(Elementis Specialties) B Nanox® 200 (Elementis Specialties) 13.50
Wickenol 151 (Alzo) 4.50 Titanium Dioxide (Evonik) 2.35
Crodamol ISNP-LQ (Croda) 4.50 C Deionized Water 41.60
®
C FANCOR ABYSSINIAN OIL (Elementis Specialties) 6.00 Sodium Chloride 0.75
Unipure Black LC989 (Sensient) 0.75 Magnesium Sulphate Heptahydrate 0.75
Unipure Red LC381 (Sensient) 1.40 Butylene Glycol 3.00
Unipure Yellow LC182 (Sensient) 2.35 Glycerin 3.00
Unipure White (Sensient) 2.50 Butylene Glycol 2.00
D Tyrostat (Lucas Meyer) 1.00 C Preservative qs
Exo-T (Lucas Meyer) 2.00
Euxyl K701 (Shulke & Mayr) 1.00 Procedure:
1. Heat combined phase A to 75°C.
Procedure:
1. Premix Part A and Part B separately and heat to each 80-85°C. 2. Transfer to a Silverson homogeniser and with mixing, gradually add phase B to phase A. Mix until fully dis-
persed.
2. Add Part A into Part B with dispermat for 10 minutes to form the emulsion.
3. Premix Part C and slowly add into Part A & B while cooling to 50oC-55oC. 3. In a separate container warm phase C to 75°C.
4. Transfer to Silverson Homogenizer for 1-3 minus, until the pigments fully dispersed.
4. Using high shear mixing (e.g. Silverson homogeniser), slowly add Phase C to Phase A + B.
5. Transfer to a propeller mixer and cool down to below 40°C.
6. Add Part D ingredients to the batch and mix well. 5. Continue to mix for several minutes.

6. Transfer to propeller stirrer and commence cooling.

Viscosity: 13,000cps (RV Spindle T-E, 20 rpm, 30s, 22oC)
7. At 35°C, add phase D to the batch.

The presence of BENTONE GEL® IHD V,

rheological additive, in sunscreen systems add
body, yet allow easy and even distribution,
due to the thixotropic nature.

4
 5

MOISTURIZING BODY CREAM B-1000-01 CURL ENHANCING REPAIRING CREAM H-1000-01

A Deionized Water 76.50 A Water 64.40
Glycerin 3.00 Disodium EDTA 0.10
Rheoluxe® 812 (Elementis Specialties) 3.00 Glycerin 3.00 Rheoluxe® 812 is
B Dracorin CE (Symrise) 4.00 Panthenol 0.50 a polyurethane
FANCOL® VB (Elementis Specialties) 5.00 FANCORSIL® LIM-1 (Elementis Specialties) 3.00 based thickener
Multiple Hydration Complex (Elementis Specialties) 3.00 B Lipomulse 165 (Lipo Chemicals) 6.00 designed to
Caprylic/Capric Triglyceride 3.00 Mineral Oil (Penreco) 10.00 increase viscosity
FANCOL® CH (Elementis Specialties) 0.50 Cetearyl Alcohol 2.00 of oil in water
Cetearyl Alcohol 1.00 FANCOL® Abyshea (Elementis Specialties) 5.00 emulsions while
C Euxyl K701 (Schulke & Mayr) 1.00 C Meadowquat® HG-70 (Elementis Specialties) 3.00 maintaining
Euxyl K701 (Schulke & Mayr) 1.00 excellent skin
Procedure: Rheoluxe® 812 (Elementis Specialties) 2.00 feel.
1. Heat phase A ingredients to 80C with propeller mixing.
2. Combine phase B ingredients and heat to 80C with propeller mixing. Procedure:
3. Add phase B to phase A with moderate speed propeller mixing. 1. Combine phase A ingredients and heat to 80C with propeller mixing.
4. Cool to 45C and add phase C ingredients to batch. 2. Combine phase B ingredients and heat to 80C. Mix until uniform.
5. Cool to room temperature with mixing. 3. Add phase B to phase A with propeller mixing.
4. Begin cooling.
Viscosity: RV T-E @ 20rpm: 38,250cps pH: 4.48 5. At 40C, add phase C ingredients to batch one at a time.
6. Cool to room temperature with propeller mixing.
NATURAL HAND AND FOOT CREAM B-1002-01 Viscosity: RV T-E @ 20rpm: 35,8010cps
A Deionized Water 23.90
pH: 4.40
Glycerin 3.00
Bentone ® EW (2% Solution) (Elementis Specialties) 50.00 SHINE SPRAY H-1001-01
B Fancol® VB (Elementis Specialties) 4.00
A FANCOL® POLYISO®300 CG (Elementis Specialties) 55.00
AFRICAN HYDRATION COMPLEX (Elementis Specialties) 6.00
FANCOL® ID-CG (Elementis Specialties) 35.00
Cetearyl Alcohol (Croda) 3.00
Xiameter 245 Fluid (Dow Corning) 2.00
Thixcin® R (Elementis Specialties) 0.10
ANTI-AGING HAIR COMPLEX™ (Elementis Specialties) 5.00
C Simulgreen 18-2 (Seppic) 3.00
FANCOL® Abyshea (Elementis Specialties) 3.00
Fancol® CB (Elementis Specialties) 2.00
D Aloe Vera Juice (Bio-Botanica) 2.00
Procedure:
Licorice Extract (Bio-Botanica) 2.00
Euxyl K701 (Schulke & Mayr) 1.00 1. Combine ingredients, mixing well after each addition.
2. Mix until clear and uniform.
Procedure:
1. Heat phase A to 70°C with propeller mixing.
2. Combine phase B ingredients and heat to 70°C .
3. Heat phase C to 70C and mix until uniform.
4. Add phase C to phase B and mix well.
5. Add combined phase B/C to phase A with moderate sheer.
6. Begin cooling.
7. At 45°C, add phase D ingredients to batch.
8. Homogenize for 5 minutes.
9. Cool to room temperature with slow mixing.

Viscosity: RV T-E @ 20rpm: 81,500cps pH: 5.00

6