Scribd
Upload
35 views

Can Bus

The document describes a BUS cable for CAN bus installations. It provides details on the cable structure, materials, electrical properties, technical specifications, applicable standards, and intended applications for indoor fixed CAN bus installations up to 40m in length.

Uploaded by

Luis Aguilar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
35 views

Can Bus

The document describes a BUS cable for CAN bus installations. It provides details on the cable structure, materials, electrical properties, technical specifications, applicable standards, and intended applications for indoor fixed CAN bus installations up to 40m in length.

Uploaded by

Luis Aguilar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

BUS Cables

CAN Bus fixed installed


PVC

Type Fixed installation, indoor


Cable structure 2x2x0.34 mm² (stranded)
Inner conductor Ø: Copper, bare (AWG 22/7)
Core insulation: Foam-skin-PE
Core colours: wh/bn, gn/ye
Stranding element: Double core
Separator: Polyester foil over stranded bundle
Shielding 1: -
Total shielding: Cu braid, tinned
Outer sheath material: PVC
Cable external diameter: app. 8,5 mm ± 0,3 mm
Outer sheath colour: Violet similar to RAL 4001

Electrical data
Characteristic impedance: 120 Ohm ± 10 %
Conductor resistance, max.: 55,4 Ohm/km
Insulation resistance, min.: 5 GOhm x km
Loop resistance: 110,8 Ohm/km max.
Mutual capacitance: 40 nF/km nom.
Nominal voltage: 250 V
Test voltage: 1,5 kV

Technical data
Weight: app. 85 kg/km
bending radius, repeated: 130 mm
Operating temperature range min.: -40°C
Operating temperature range max.: +70°C
Caloric load, approx. value: 1,32 MJ/m
Copper weight: 46,00 kg/km

Norms
Applicable standards: CAN Bus acc. to ISO 11898-2
Flame-retardant acc. to IEC 60332-1-2
UL Style: CMX 75°C (shielded)
CSA standard: CSA FT1

Application
HELUKABEL® CAN Bus fixed installations and occasionally motion, for normal requirements. The two signal pairs are provided in the form twisted
pairs. As a result, the diameter is somewhat larger than that of 801573. In the event of diameter problems, please have a look at this type. For cable
lengths up to max. 40m (observe CAN specifications).

Part no. 803344, CAN BUS


Dimensions and specifications may be changed without prior notice.

190

You might also like