IP Horn Speaker Datasheet-2022
IP Horn Speaker Datasheet-2022
IDESCR IPT! ON
The IP-A1SC15 is an IP paging horn speaker to deliver clear announcements via network with 124 dB output
capability powered by PoE + power source. Its rugged enclosure is IP6 6 rated for outdoor environments.
The IP-A1SC15 supports common network protocols for easy integrations with Video Management Systems and
other SIP-compatible VoIP systems and devices. It can be detected as a generic ONVIF device by using
ONVIF protocol. Group paging function is available with 10 Multicast ports for zone paging requirements.
Internal sound source file storage allows storing pre-recorded messages or tones which can be played back by
2 control inputs or Remote AP! (HTTPl.
■ SPECIFICATIONS
Power Source PoE+ (IEEE802.3at Class 4), PoE (IEEE802.3af Class 3)
Power Consumption 22 W (at PoE+ powered, rated output)
13 W (at PoE powered, rated output)
5 W (IEC62368-1l
Amplifier Rated Output 15 W (at PoE+ poweredl, 8 W (at PoE poweredl
Sensitivity 112 dB (1 W, 1 ml (500 Hz - 2.5 kHz, peak level)
Maximum 124 dB (at PoE+ powered, 15 W, 1 ml (500 Hz - 2.5 kHz, peak level)
Sound Pressure level 121 dB (at PoE powered, 8 W, 1 ml (500 Hz - 2.5 kHz, peak levell
Frequency Response 280 Hz - 12.5 kHz
Audio Codec PCMU (G.711ul, PCMA (G.711al, G.722
Broadcasting Mode SIP Broadcasting Mode: PCMU/PCMA/G.722
Multicast Broadcasting Mode: PCMU/PCMA/G.722, Max. 10 ports
VMS Broadcasting Mode: Audio Backchannel, PCMU
Internal Message Broadcasting Mode
Note: Each broadcast mode can be assigned an order of priority using the
Priority Settino function.
Internal Messages Max. 20 messages (Max. recording capacity: 80 MBl
Supported file formats
WAV file: 8/16/44.1/48 kHz sampling frequency, 8/16 bit, monaural/stereo
MP3 file: 32/44.1/48 kHz sampling frequency, 64 - 320 kbps, CBR/VBR, monaural/stereo
Repeat count: 1 - 10 times, Interval time: 0 - 30 sec
Triqqer: Control Input or Remote AP! (HTTP)
Network 1/F 100BASE-TX, MDI/MD 1-X, RJ-45
Network Protocol TCP/IP, UDP, HTTP, RTP, ARP, ICMP, RTSP, SIP (RFC3261l
Control Input 2 channels, no-voltage make contact inputs, open voltage: 5 V DC,
short-circuit current: 2 mA or less, removable terminal block (3 pinsl
Control Output 1 channel, open collector output, withstand voltage: 30 V DC,
control current: 10 mA or less, removable terminal block (3 pinsl
Indicator LAN LINK/ACT (qreenl, STATUS (oranael
Dust/Water Protection IP66
Operatinq Temperature -30 'C to +55 'C (-22 'F to +131 'Fl
Operatinq Humidity 90 %RH or less (no condensationl
Finish Horn flare and body: Aluminum, off-white (RAL 9010 equivalentl, paint
Reflector horn: ABS resin, off-white(RAL 9010 equivalent)
Rear cover: PC resin, off-white (RAL 9010 equivalentl, paint
Bracket, screws and bolts: Stainless steel
Dimensions 222 (W) X 211 (H) X 276 (D) mm (8.74" X 8.31" X 10.87")
Weiqht 1.4 kq (3.09 lbl
Accessory Rear cover ...1, Removable terminal pluq (3 pinsl ...2
Option Speaker mount bracket: SP-131, SP-201, SP-301
Pole band: YS-60B
Note: Take special care to avoid mounting this speaker directly to structures (such as ski lift towers)
that generate large amounts of vibration. Also, do not use this speaker in environments where it may be
exposed to oil or other chemicals, as mounting parts could rapidly deteriorate, possibly resulting in personal
in jury or other accidents due to the speaker falling.
■APPEARANCE
attachment ring
106 [4.17"]
CX)
.--, t0
-----j--f- - - -- -
t0
N
c..o
0
t0
4.5 [0.18"]
CX)
UNIT:mm SCALE:1/4 Note: Numerical values in parentheses are for reference only.