MAIN SPECIFICATIONS
Model (Pneumatic Tyres) BX-15 BX-18 BX-20 BX-25
Load capacity kg 1500 1500 1750 1750 2000 2000 2500 2500
Load centre mm 500 500 500 500 500 500 500 500
Wheelbase mm 1270 1450 1270 1450 1450 1595 1450 1595
Overall width mm 1120 1120 1120 1120 1165 1165 1165 1165
Turning radius mm 1750 1970 1780 1970 1960 2140 2000 2140
Length to fork face mm 2030 2220 2075 2220 2260 2445 2325 2445
Model (Pneumatic Tyres) BX-15 BX-18 BX-20 BX-25
Battery capacity* (std) V/Ah 48/485 48/485 48/565 48/565
Battery capacity* (high) V/Ah 48/545 48/545 48/700 48/700
Battery capacity* (lwb) V/Ah 48/700 48/700 48/865 48/865
Electric motor (driving) kW x unit 9.0 x 1 9.0 x 1 12.0 x 1 12.0 x 1
Electric motor (lifting) kW 11.0 11.0 13.5 13.5
lwb = long wheelbase * Larger battery capacities on request
Model (Cushion Tyres) BX-15 BX-18 BX-20 BX-25 BX-30
Load capacity kg 1500 1750 2000 2500 3000
Load centre mm 500 500 500 500 500
Wheelbase mm 1220 1220 1260 1260 1360
Overall width mm 970 970 1070 1070 1100
Turning radius mm 1800 1800 1845 1875 2060
Length to fork face mm 2045 2050 2155 2190 2365
Model (Cushion Tyres) BX-15 BX-18 BX-20 BX-25 BX-30
Battery capacity* (std) V/Ah 48/450 48/450 48/680 48/680 48/850
Battery capacity* (high) V/Ah 48/600 48/600 48/800 48/800 48/1000
Electric motor (driving) kW x unit 9.0 x 1 9.0 x 1 12.0 x 1 12.0 x 1 12.0 x 1
Electric motor (lifting) kW 11.0 11.0 13.5 13.5 13.5
* Larger battery capacities on request
Nissan Forklift Europe B.V.
http://www.Nissan-nfe.com CEN-BX-03.NFE/08-08-5000 Printed in the Netherlands
Nissan Motor Co., Ltd. reserves the right to make any changes without notice concerning colours, equipment or specifications detailed in this brochure, or to discontinue
individual models. The colours of vehicles delivered may differ slightly from those in this brochure. The specifications vary for different countries depending on local market
conditions. Please consult your local dealer to ensure that the vehicle delivered accords with your expectations. All values are determined based on the standard condition
and may vary, due to motor and system tolerances, condition of the truck and operational conditions. Some equipment shown on photos are optional.
BX Series
1.5 - 2.5 Tonne – Cushion Models
1.5 - 3.0 Tonne – Pneumatic Models
Lifting you hig
Since it began production of forklifts more than half a century ago, Nissan
has developed and produced comprehensive ranges of high performing and
innovative materials handling equipment for markets throughout the world.
Today, as part of the Renault-Nissan automotive alliance, the company benefits
from advantages that keep it at the forefront of forklift design - from leading
engine and electric technology, to operator safety, comfort and productivity.
In turn, Nissan Forklift users also benefit from numerous other concepts which
have made Nissan a true global brand - not least, quality, value and customer
support.
Strategically located production facilities
Nissan Forklift’s production facilities are strategically located in Europe, Japan and the USA, providing
the greatest flexibility in responding to the demands of different markets. The European production
facility for forklifts is situated in Pamplona, Spain, with high quality output confirmed through ISO
9001: 2000 certification ISO 14001, and 1996 certification for Environmental Management Systems.
Production of Nissan’s warehouse range is in Gothenburg, Sweden, where the facility also has ISO
9001: 2000 and 14001: 1996 certification.
Future vision
Nissan Forklift product designs are the result of extensive research – basic performance, durability,
safety, operational ease, environmental information and the valuable feedback from a wide
customer base. This painstaking attention to detail leads to materials handling equipment of
the highest technical standard and quality possible.
Engine technology
For example, has been developed with both economical performance and concern for the envi-
ronment as major considerations. All Nissan Forklift LPG engines are equipped as standard with
Nissan’s unique closed loop three-way catalyst to reduce emissions by up to 98% and an engine
management system to provide maximum fuel economy. Nissan diesel engines are also ultra-clean
and ultra fuel efficient.
her
Full range concept
As one the world’s leading manufacturers, Nissan Forklift offers a full range for the vast
majority of industry’s materials handling requirements. This includes LPG and diesel forklifts
BX
from 1.5 – 7.0 tonnes capacity and three and four-wheel electric models from 1.25 to 3.0
tonnes. They are complemented by an extensive warehouse product range of:
• Reach trucks
• Order pickers
• Pallet transporters
• Pallet stackers
It’s a range that enables you to tailor the optimum solution totally to the needs of your
logistics operation.
Worldwide network
Nissan Forklift products are supplied through a network of more than 800 dedicated out-
lets covering 75 countries worldwide.
A competent, experienced salesforce is available to recommend the ideal balance of equip-
ment and the best way to acquire it - from direct sales to short-term hire or long-term rental.
Support 24/7
Nissan Forklift understands that customers need their materials handling equipment to
keep on running, especially in high-demand operations. Our expert-trained and well moti-
vated service network is rapidly available to provide assistance 24 hours a day, seven days
a week. Nissan Forklift will also advise and support fleet customers in creating maintenance
schedules, effective repair procedures and emergency parts stock to maximize productivity.
Specialist training can also be provided for customer service engineers and forklift operators.
Nissan Forklift trucks’ operational reliability is also enhanced by the ready availability and
efficient supply of parts. Extensive stock within the local network is supported with further
availability at pan-European level, with centres in the Netherlands, Spain and UK shipping over-
night for delivery to the Nissan Forklift dealer network or direct to the customer’s premises.
Multi-function LCD
The multi-function LCD display provides
a wealth of information at a glance for
quick operation status and maintenance
activities.
Tilt levelling (option)
Productivity can be improved at the sim-
ple touch of a button on the tilting lever.
It brings the forks completely horizontal,
enabling the operator to position the
forks to the load quick and easy.
Car-style levers
The automotive influence extends to
the use of automobile-style levers, with
simple actions that let the operator
focus on the job.
Operating ease
BX
When it came to the planning and design
of Nissan’s BX Series workspace, thought-
ful attention was given to the operators’ well
being. Despite the many activities that occur
throughout the operator’s shift, concentration
on his job is critical. For that reason, a stress-
free environment supported by the BX Series’
low noise levels is of absolute importance.
With its hydraulic powered steering the BX
Series is highly responsive to the operator’s
commands and making the truck a truly
manoeuvrable performer. This is even more
enhanced by the automatic deceleration which
is activated when engaging the opposite
travel direction, or when the driver lifts
his foot from the accelerator pedal. Further
driving ease is provided by the optional Steer-
ing Synchroniser. When the truck is returned
to the straight driving direction after turning,
the knob will return to its original position.
The Soft Landing System ensures that the
forks will smoothly decelerate just before
reaching the ground. Even if the operator
keeps the control lever completely down.
Ultra-low noise levels
The BX Series’ low noise levels are of
great influence to the driver’s well being.
Not only does this assist with (significantly)
reducing operator fatigue, it is also beneficial
for those in the surrounding environment.
dB(A)
-8,5 dB(A)
64 66 68 70 72 74 76
Nissan BX Series
Competitor A.
EN12053 – Operator’s ear, 1.5 Tonne, Economy mode
High traveling speed
A significantly high travelling speed is
what you can expect thanks to the AC
TECH control and a large motor inside
every BX.
Full load
Nissan BX Series 16
Competitor A. 12
No load
Nissan BX Series 18
Competitor A. 14.5
10 12 14 16 18 20
(km/h)
3+1 Performance modes
Three preset performance modes can
be chosen to adjust travelling and
lifting performance to suit different
requirements.
=^\]
=BdYZ
BBdYZ
A^[i^c\eZg[dgbVcXZ
EBdYZ
BBdYZ
:BdYZ
Adl
Adl IgVkZa^c\eZg[dgbVcXZ =^\]
Fuzzy logic acceleration
Nissan Forklifts’ unique feature enables
the truck to respond according to the
speed with which the pedal is depres-
sed, allowing more accurate and precise
control by the driver.
Fuzzy logic acceleration curves
BX fastest
acceleration
BX slowest
Acceleration (G)
acceleration
BX range
Competitor’s
acceleration
Pedal stroke
Perfect performance
BX
The BX Series provides uncompromising
speed and performance thanks to its robust
drive system that includes an AC-powered
drive motor, and a high efficiency controller.
Using a four-digit Personal Identification
Number (PIN), you can choose from three
preset performance modes (economy/power/
high) and it is even possible to select the
performance settings yourself. Regardless of
which mode is chosen, the BX Series can be
fully optimised to achieve long operating hours
and low energy consumption.
For instance the BX Series’ hydraulic powered
steering only consumes energy at demand.
The AC TECH system continuously deter-
mines the exact required amount of energy,
and is dependent on the command given.
Additionally, if the truck is not operated within
preset length of time, the Auto Power Off
function switches off the power automatically.
Along with its 5-mode regenerative braking,
automatic deceleration and other energy
saving features the available working hours
from each battery charge are increased.
Single lever control
The optional exclusive Nissan Single Lever
Control enables simultaneous lifting and tilting
functions for greater productivity. (Double
control levers are available as standard.)
Rollback control
To prevent the truck from rolling down
a slope too fast, the Nissan BX Series
provides a unique Rollback Control
device, ensuring that the truck can
reverse only slowly and at a constant
speed.
Mast Lock System
This standard feature on all models
helps to prevent unsafe situations in-
volving the mast and forks by automati-
cally locking mast and fork movement
when the operator leaves the seat. At
the moment the operator sits down,
hydraulic functions are available to the
operator once again.
Tilt lock
Lift lock
Securing your safety
BX
An efficient, comfortable workplace doesn’t
mean caution should take a back seat. The
BX Series offers a large package of standard
features to help provide operational bounda-
ries for your drivers. Safety is ensured by the
special Nissan Forklift RRS (Risk Reduction
System) which incorporates an extensive
package of features:
• Excellent all round visibility
• Cushioned Stability Control
• Mast Lock System
• Lift Control
• Rollback Control
• Inhibitor Control
• Foot Parking Brake
• Warning buzzers
The BX Series optimum safety precautions
are enhanced by Nissan’s Lift Control. This
system limits the lift speed when a forklift is
travelling fast.
This and other special Nissan Forklift
features provide a safe forklift, that is still easy
to operate.
Cushioned Stability Control
Drive with confidence around every turn.
The maintenance-free rubber dampener used
in Nissan’s exclusive Cushioned Stability
Control system provides outstanding lateral
stability.
GjWWZgYVbeZcZg
egdk^YZhVYYZY
hiVW^a^inVcY
ZVh^Zg]VcYa^c\
(CSC cannot completely eliminate possibility of tipping over)
AC TECH
The new BX Series features a 100%
AC powered system for drive and
hydraulic pump motors, combined with
Nissan’s state-of-the-art AC TECH
controller.
Five Regenerative modes
Excess energy is used to charge the
battery in a variety of different opera-
tions. Five different generative modes
contribute to improve energy efficiency
and longer operating hours per battery
charge.
& Hl^iX]WVX`gZ\ZcZgVi^dc
' ;ddiWgV`ZgZ\ZcZgVi^dc
( 6XXZaZgVidg"d[[gZ\ZcZgVi^dc
) GdaaWVX`8dcigdagZ\ZcZgVi^dc
* A^[i^c\$adlZg^c\gZ\ZcZgVi^dc
High lifting speeds
The high capacity AC motor gives the
BX Series high lifting speeds, enhanc-
ing productivity and helping to get more
work done faster.
Designed to fit your needs 11
BX
For almost every type of operation, there is a
BX Series designed to fit your needs. With 13
models ranging from 1.5 to 3.0 tonne*, the
Nissan BX Series provides custom fit for a
variety of operations, including industry or
warehousing environments. All versions are
available in cushion* and pneumatic tyre
versions.
The cushion BX models are very compact
which make them ideally suited for indoor
operations such as block stacking and working
in surroundings where space is at a premium.
To keep your warehouse operations running
smoothly, cost effective maintenance is an
absolute requirement. On-board diagnostics
run via the BX Series’ Built-In-Test-Equipment
(BITE) module which is integrated into its AC
TECH controller. With clear communication
through the LCD panel readout and key-
pad, operators and service technicians can
intuitively identify with and respond to specific
truck parameters according to the needs of
their job.
Five unique profiles can be programmed to
precisely adjust the truck’s performance in
order to match operator experience and the
load or handling conditions.
Combined with its energy saving features,
reliable design and operator ease, the BX
Series offers a perfect balance - ideal for
owners, the operators and those in the
surrounding environment as well.
*3.0 tonne: cushion version only.
