T6

T6 Economical Industrial Weighing Indicator

weighing indicator
Introduction

T6
Compared to the weighing precision of typical weighing indicators,
the high precision and outstanding electromagnetic compatibility of
the T6 weighing terminal enable it to better fulfill measurement and
control applications in harsh industrial environments. Thanks to its
SMT design, the T6 weighing terminal consumes less power and is
more compact, allowing it to be panel mounted into a control
cabinet.
From an analog output to industrial Fieldbus to Ethernet, the T6
provides a wide variety of interface options. It can seamlessly
connect with many types of PC's, PLC's, and DCS's. Its digital
communication interface provides direct, high-speed control for a
variety of applications such as packaging, filling, dynamic
weighing and discharging.
The T6 can be transparently controlled by a PLC or a PC for remote
configuration and calibration. Its six-wire load cell interface
compensates for signal loss due to long cable runs (up to 300m).

Features
Compact / low cost
Multiple control modes
Many reliable data interfaces are supported
Quality assured with Transcell’s advanced
manufacturing technology

Control applications

RS-232 serial communication RS-485 serial bus communication

Continuous or demand output formats Baud rate: 1200 to 57600 bps (selectable)
Popular communication protocol is Communication response time < 5 ms
supported Indicator always used as a slave
Remote zero and tare functions are Supports MODBUS RTU slave
supported protocol
All interfaces feature ESD protection

Analog Output Set Point outputs

Fully isolated 4-20 mA output Four set point values (via keyboard)
16-bit D-to-A conversion (1/32767) Set point output thru internal relays
Fully adjustable via front keypad Set point is defined as the result of a
preset value compared to the
displayed weight

Batching system with discharge

Weighing
Supports fixed value feeding and discharging
Displayed graduations: 600 to
Two set points (via keyboard)
100,000 (selectable)
Manually select material type
Sampling rate: 10 to 80 Hz (selectable)
Internal relay control
Four or Six Order Dynamic Weight
Filtering
Remote or local zero, tare and calibration function

High/Low Alarm

Set high high/high/low/low low values

via keypad
Internal relays can control the output
warning signal
Supports Silo material filling

Contents subject to change without prior notice Version V3.17

www.transcell.com
T6
T6 Economical Industrial Weighing Indicator

weighing indicator
Multiple Material Batching with discharge

T6
Supports fully automatic or semi-automatic batching
of up to four types of material
Choose single or double speed control for each
kind of material
Automatically adjusts the feeding and discharging
material resolution
Manually set input/output control function

Specificati ons
Housing Rear cover: SS304 stainless steel / Filtering Built-in six-order dynamic filtering algorithm
Front housing: Aluminum Extrusion Excitation +4.5 VDC
Installation Panel installation Display 6-digit LED, yellow
Protection Level IP67 Keypad 4 function keys
Interface Drives up to 4 – 350Ω load cells, or Serial Interfaces RS-485 standard, RS-232 optional
equivalent parallel resistance>87Ω Power 86VAC~264VAC, 50~60HZ,300mA,
Display Division 1,000~10,000 24VDC/0.3A
AD Converting rate / Internal converting rate: 300 Operating Temperature -10℃ to 45℃，10% to 90%RH,non-condensing
Sampling rate times/sec, S ampling rate:10~80 Storage Temperature -10℃ to 45℃，10% to 90%RH,non-condensing
times/sec (option)

Product model matrix

Model Part NO. Description
T6-1000 105275110 Industrial weighing terminal, compact type, DC, RS-232 interface
T6-1200 107275250 Industrial weighing terminal, compact type, DC, RS-485 interface, analog output
T6-1800 107275140 Industrial weighing terminal, compact type, DC, RS-232 interface, analog output
T6-2000 105092610 Industrial weighing terminal, compact type, AC, RS-485 interface

Dimensions

内容如有更改，恕不另行通知 版本 V3.17
www.transcell.com