CMI INSTALLATION SYSTEM FOR:
EXTERNAL GENERAL AREA (FLOOR) CMI INSTALLATION SYSTEM FOR:
EXTERNAL FACADE
RC Slab
Thick Bed Mortar
CMI FloorScreed 085 + water Concrete Wall
Adhesive Bed Thick Bed Mortar
CMI TileFix 181 mix with CMI Cement/Sand ratio: 1:4 + PMP Cement
Mortar Admix 380 Additive 100gm (1 sachet to 1 bag 50kg
OPC) or alternatively
CMI Render
Grouting
CMI TileCrete 182 mix with
CMI Mortar Admix 380
(Dilution 1:1 with clean water) Adhesive Bed
CMI TileFix 181 mix with CMI
Mortar Admix 380
Homogenous Porcelain Tiles
Grouting
CMI TileCrete 182 mix with
CMI Mortar Admix 380
(Dilution 1:1 with clean water)
Ceramic Tiles / Stones
Notes: Ensure to leave a movement joint of at least 6mm at perimeter between wall and floor and
when different material meets. Notes: 1) Not to scale
2) Movement joint must be incorporated as per BS 5385: Part 1-4
CMI INSTALLATION SYSTEM FOR:
EXISTING TILES
CMI INSTALLATION SYSTEM FOR:
TIMBER
RC Slab Screeding
Ex-Mortar
Ex-Ceramic Tile / Stone
Timber
Adhesive Bed Primer
CMI TileFix 181 mix with Tile / Stone CMI Mortar Bond 330
CMI Mortar Bond 330
Adhesive Bed
Grouting
CMI TileFix 181 mix with CMI
CMI TileCrete 182 mix with
Mortar Bond 330
CMI Mortar Admix 380
(Dilution 1:1 with clean water)
Finishes Grouting
New Tile / Stone CMI TileCrete 182 mix with
CMI Mortar Admix 380
(Dilution 1:1 with clean water)
Notes: 1) Not to scale
Notes: 1) Not to scale 2) Movement joint must be incorporated as per BS 5385: Part 1-4
2) Movement joint must be incorporated as per BS 5385: Part 1-4
CMI INSTALLATION SYSTEM FOR:
SWIMMING POOL
CMI INSTALLATION SYSTEM FOR:
BATHROOM
Brick Wall
RC Slab
Movement joint by other to all internal Angle Fillet
corners of wall
RC Slab
Angle Fillet Waterproofing
Waterproofing: CMI ProofCoat 087 (2 Coats)
CMI ProofCoat 087 (2 Coats)
Slurry bond coat: Thick Bed Mortar
1 part OPC to 1 part CMI Mortar Bond 330 Floor: CMI FloorScreed 085 + Water
(v/v) (without dilution) Wall: Cement/Sand ratio: 1:4 + PMP
Thick Bed Mortar: Cement Additive 100gm (1 sachet to 1
Floor: CMI FloorScreed 085 + Water bag 50kg OPC)
Wall : Cement/Sand ratio: 1:4 + PMP Cement
Additive 100gm (1 sachet to 1 bag 50kg OPC)
Adhesive Bed
CMI TileFix 181 mix with
Adhesive Bed: CMI Mortar Admix 380
CMI TileFix 181 + CMI Mortar Admix 380
Grouting
Grouting: CMI TileCrete 182 mix with CMI
CMI TileCrete 182 + CMI Mortar Mortar Admix 380 (Dilution 1:1
Admix 380 (dilution 1:1 with clean water)
Up to 300 mm
with clean water)
Glass Mosaic Tiles Homogenous Porcelain Tiles
Fiberglass netting by others embedded into
waterproofing at floor wall junction extended 100mm Notes: 1) Movement joints shall be incorporated at
perimeter joint between floor & wall and where
other materials meet.
Note:
1) Provide roofing shade for external application of waterproofing and tiling works
2) Movement joint according toBILL
BS 5385:OF PartQUANTITY
1-4 (SAMPLE)
CMI INSTALLATION SYSTEM FOR:
CMI INSTALLATION SYSTEM FOR: INTERNAL GENERAL AREA
ALC BLOCK
Brick Wall
ALC Block
RC Slab
Primer
Thick Bed Mortar
CMI Mortar Bond 330
Floor: CMI FloorScreed 085 + Water
Wall: Cement/Sand ratio: 1:4 + PMP
CMI BlockFix 187 (ALC Thin Bed Adhesive) Cement Additive 100gm (1 sachet to
1 bag 50kg OPC)
Thick Bed Mortar
Floor: CMI FloorScreed 085 + Water
Adhesive Bed
Wall: Cement/Sand ratio: 1:4 + PMP Cement
CMI TileFix 181 mix with CMI
Additive 100gm (1 sachet to 1 bag 50kg OPC)
Mortar Admix 380
Adhesive Bed
CMI TileFix 181 mix with CMI Mortar Admix 380
(For Ceramic Glazed Tiles & Homogeneous Porcelain Tiles) Grouting
CMI TileCrete 182 mix with
Grouting
CMI Mortar Admix 380
CMI TileCrete 182 mix with CMI Mortar Admix
(Dilution 1:1 with clean water)
380 (Dilution 1:1 with clean water)
Ceramic Tile / Mosaic
Homogenous Porcelain Tiles
Notes: 1) Movement joints shall be incorporated at perimeter
Notes: 1) Not to scale joint between floor & wall and where other
2) Movement joint must be incorporated as per BS 5385: Part 1-4 materials meet.
CMI INSTALLATION SYSTEM FOR:
EXTERNAL GENERAL AREA (FLOOR) CMI INSTALLATION SYSTEM FOR:
EXTERNAL FACADE
RC Slab
Thick Bed Mortar
CMI FloorScreed 085 + water Concrete Wall
Adhesive Bed Thick Bed Mortar
CMI TileFix 181 mix with CMI Cement/Sand ratio: 1:4 + PMP Cement
Mortar Admix 380 Additive 100gm (1 sachet to 1 bag 50kg
OPC) or alternatively
CMI Render
Grouting
CMI TileCrete 182 mix with
CMI Mortar Admix 380
(Dilution 1:1 with clean water) Adhesive Bed
CMI TileFix 181 mix with CMI
Mortar Admix 380
Homogenous Porcelain Tiles
Grouting
CMI TileCrete 182 mix with
CMI Mortar Admix 380
(Dilution 1:1 with clean water)
Ceramic Tiles / Stones
Notes: Ensure to leave a movement joint of at least 6mm at perimeter between wall and floor and
when different material meets. Notes: 1) Not to scale
2) Movement joint must be incorporated as per BS 5385: Part 1-4
CMI INSTALLATION SYSTEM FOR:
EXISTING TILES
CMI INSTALLATION SYSTEM FOR:
TIMBER
RC Slab Screeding
Ex-Mortar
Ex-Ceramic Tile / Stone
Timber
Adhesive Bed Primer
CMI TileFix 181 mix with Tile / Stone CMI Mortar Bond 330
CMI Mortar Bond 330
Adhesive Bed
Grouting
CMI TileFix 181 mix with CMI
CMI TileCrete 182 mix with
Mortar Bond 330
CMI Mortar Admix 380
(Dilution 1:1 with clean water)
Finishes Grouting
New Tile / Stone CMI TileCrete 182 mix with
CMI Mortar Admix 380
(Dilution 1:1 with clean water)
Notes: 1) Not to scale
Notes: 1) Not to scale 2) Movement joint must be incorporated as per BS 5385: Part 1-4
2) Movement joint must be incorporated as per BS 5385: Part 1-4
