Scribd
Upload
185 views1 page

Ac Marine CX 3 5 8

The AV6K is a 1.4 meter VHF marine antenna designed for marine radio use. It has a rugged fiberglass construction with polyurethane foam elements enclosed within to protect against weather. The antenna has an omnidirectional horizontal pattern, vertical polarization, and 50 ohm impedance. It is designed to withstand winds up to 125 mph and has an IP67 waterproof rating, making it suitable for marine applications.

Uploaded by

Jonson Kiran Dcosta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
185 views1 page

Ac Marine CX 3 5 8

The AV6K is a 1.4 meter VHF marine antenna designed for marine radio use. It has a rugged fiberglass construction with polyurethane foam elements enclosed within to protect against weather. The antenna has an omnidirectional horizontal pattern, vertical polarization, and 50 ohm impedance. It is designed to withstand winds up to 125 mph and has an IP67 waterproof rating, making it suitable for marine applications.

Uploaded by

Jonson Kiran Dcosta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

AV6K, AV6K-U

4.5 ft, 1.4 m - VHF Marine Antenna

Application

The AV6K is a rugged high quality dipole antenna designed for the
marine VHF radio telephone service. It is a high quality antenna with
a durable construction and a beautiful finish for installation on all
kinds of vessels

Electrical specifications

Frequency range 156-162 MHz, VSWR < 1.5:1


153-170 MHz, VSWR < 2:1
Nominal impedance 50 ohm
Power rating 200 W
Gain 2 dbi
Pattern Horizontal plane: Omni-directional
Vertical plane: Typical dipole
Polarization Vertical
Connector AV6K N female
AV6K-U UHF Female
DC-grounded Yes

Mechanical specifications

Design Centre-fed coaxial dipole. Radiating


elements completely enclosed in
polyurethane foam within a fiberglass tube.
Hot dip galvanized mounting hardware.
Height 1.4 m
Weight 1.3 kg, ex. clamps, 2.2 kg with clamps
Wind rating 55 m/s = 125 mph
Moment of flexure 3.0 kpm at 55 m/s
Finish Polyurethane lacquer, white
Temperature range -55 0C, +55 0C; -67 0F, +131 0F
Water Proofing IP67

Mounting
The AV6K may be mounted to two welded brackets or clamped onto
a mast or post. Clamps of type ATC are included. Connector is
protected by a plastic tube with stuffing nut.
Suitable cable: RG8, RG213 or similar.

AV6K.pub (12/15-1) www.comrod.com Page 1


AV6K-MAR-SD-0001

Specifications subject to change without notice. The information in this document does not form part of any quotation or contract

You might also like