Solenoid valve 2/2 way N.C.

21A3KV15
÷
Direct acting 21A2KV55

PRESENTA
PRESENTATION:
Direct acting S.V. for interception of fluids compatible with the
construction materials.
Minimum operational pressure is not required.
The materials used and the tests carried out ensure maximum
reliability and duration.
USE: Automation
Heating
PIPES: G 1/8 - G 1/4

COILS: 8W -Ø 13 (1)
BDA - BDS - BSA 155°C (class F)
BDP 160°C (high temperature)
BDF 180°C (class H)
SDH 180°C (class H)
12W - Ø 13
UDA 155°C (class F)
14W - Ø 13
GDH 180°C (class H)
(1) Explosion-proof housing for coils with electrical
connections EN 175301-803 on request.
MOULDING AND BOBBIN ARE MADE BY 100% VIRGIN
HIGHLIGHTED
MATERIAL. ITEMS ARE EX STOCK
Gaskets Temperature Medium
Mineral oils (2°E),gasoline Max. allowable pressure (PS) 40 bar
V=FKM (fluoroelastomer) - 10°C +140°C Environment temperature:
gas oil, fuel oils (7°E)
with coil class F and high temperature - 10°C + 60°C
B=NBR (nitrile rubber) - 10°C + 90°C Air, inert gas, water with coil class H - 10°C + 80°C
E=EPDM
- 10°C +140°C Water, steam
(ethylene-propylene)
For seals other than FKM replace the letter “V” with the ones
corresponding to the other seals. E.I. 21A2KE20.
Ø Pressure
Pipe Max viscosity Kv Power
Code min M.O.P.D.
ISO 228/1
cSt °E mm l/min (watt) bar AC bar DC bar
21A3KV15 12 ~2 1,5 1,4 30 18
8
22 16
21A3KV20 37 ~5 2 2 12
35 30
14
8 14 9
21A3KV25 2,5 3,2 12
30 25
G 1/8 14
8 10 6
21A3KV30 53 ~7 3 4 12 18
25
14 20
8 5 2
21A3KV45 4,5 6,5 12 7
12
14 8
21A2KV15 12 ~2 1,5 1,4 30 18
8
0 22 16
21A2KV20 37 ~5 2 2 12
35 30
14
8 14 9
21A2KV25
21A2KV25 2,5 3,2 12
30 25
14
8 10 6
G 1/4
21A2KV30 3 4 12 18
25
14 20
53 ~7
8 5 2
21A2KV45 4,5 6,5 12 7
12
14 8
8 3 1
21A2KV55 5,5 9 12 7 2,5
14 10 5
Note Also available with brass body without lead.
The “ODE ” reserves the right to carry out technical and aesthetic modifications without prior notification.

30-06-2002 ODE 21A3KV15 ÷ 21A2KV55

 MATERIALS:
MATERIALS:
Body Brass - UNI EN 12165 CW617N
Armature tube Stainless steel AISI series 300
Fixed core Stainless steel AISI series 400
Plunger Stainless steel AISI series 400
Phase displacement ring Copper - Cu 99,9%
Spring Stainless steel AISI series 300
Seal Standard: V=FKM
On request: B=NBR E=EPDM
Orifice:
< 3 mm Insert slot Stainless steel AISI series 300
> 3 mm Brass - UNI EN 12165 CW617N
On request:
Connector Pg 9 or Pg 11
Connector conformity ISO 4400
FEATURES:
FEATURES:
Electrical conformity IEC 335
Protection degree IP 65 EN 60529 (DIN 40050)
with coil fitted by connector.
SPARE
SPARE PAR
PARTS:
TS:
1. Coil: KIT:
KIT:
See coils list
< 3 mm
2. Complete plunger: KT130KV30-A=2+3
For orifice < 3 mm > 3 mm
Code R450886/V KT130KV55-A=2+3
For orifice > 3 mm
Code R450898/V
3. Complete armature tube:
Code R450606

DIMENSIONS:

COIL POWER ABSORPTION DIMENSIONS

W Inrush Hold TYPE D E F
Pipe
Type VA ~ VA ~ mm mm mm
ISO 228/1
B 30
21A3KV G 1/8 8W 25 14,5 42 54
S 32
21A2KV G 1/4 12 W 35 25 U 36 48 60
14 W 43 27 G 52 55 67

21A3KV15 ÷ 21A2KV55 ODE 30-06-2002