Operation

The principle operation is unique.

A special solid formulation within a
non-pressurised canister, when

EXA
electrically activated, generates an

extinguishing characteristic. The

aerosol consists of suspension of
micron sized particles in a mixture of
naturally occurring gases comprising Condensed Aerosol
mainly of nitrogen. Fire Suppression Modules

DATASHEET
Pyrogen Manufacturing Sdn Bhd (494713 D)
No.17 Jalan Pemberita U1/49, Temasya Industrial Park,
40150 Shah Alam, Selangor, Malaysia
Tel: +(603) 5569 9988 | Fax: +(603) 5569 6999
Email: [email protected]

Pyrogen Technologies (AUST) Pty Ltd (ABN 66 114 157827)

18 Barry Avenue, Mortdale NSW 2223, Australia

P.O. Box 694 Hurstville, NSW 1481, Australia
Tel: +61-2- 9586 3200 | Fax: +61-2- 9586 3211
Email: [email protected] EXA modules is suitable for the
following applications:
Authorised Dealer:
 Power Substation
 Generator Room
 Raised Floor
 Server Farm
 Warehouse
 Control Room
 Telecommunication Cabin
 Computer Room
 Computer Server Rack
 Distribution Board
 Electrical Control Cabinet

www.pyrogenfire.com
 EXA Dimensions
Design Principle
Minimum clearances Large EXA (EXA 10 - 50)
B
Due to a potential hazard of high temperatures (100 ~ 150°C) of
Pyrogen aerosol at the end-plate nozzle, the minimum A
clearances from the discharge nozzle for each type of EXA
generator should be observed during installation.

CEILING SLAB
WALL

False
Ceiling Small EXA (EXA Z3 - 5)
d A B

Top of Equipment d
--

_ _ _ __ _ ____ _ __ ___ _ ___ _ _ _-----

--
_ __ _
----
----
-----
--
--
> 2m

Room protected
Equipment by Pyrogen can be
H-H = 20mm
Unit: mm | Note: A & B Refer to Table below
wall mounted or
ceiling mounted Parameter Mass of Mass of Max Nozzle Length of Diameter of Discharge
generator, g aerosol protected outlet generator, generator, time, s
generating volume m3 B (mm) A (mm)
compound, g
FLOOR SLAB EXA-Z3 360
GENERAL SERIES

MODEL CLEARANCE, d
EXA-Z3 200 mm
EXA-Z6 300 mm
EXA-1 400 mm
EXA-2 700 mm
EXA-5 700 mm
EXA-10 1000 mm
EXA-20...EXA-50 1500...2000 mm

Mounting Holes for Large EXA

Wiring Diagram For TFM Cards b a
Dimension,
d mm a b c d e
For Supervised Control System EXA-10R 80 0 355 10 80
EXA-10L 80 0 355 10 80
TFM #1 TFM #2 TFM #n EXA-20 80 0 355 10 80
IIU REV:
R
Dß
Y
TBL
IIU REV:
R
Dß
Y
TBL
IIU REV:
R
Dß TBL c
Y EXA-30 60 165 357 10 390
DIP DIP DIP
SWITCH SWITCH SWITCH
EXA-50 60 165 367 10 390
EXA-30E 70 122 268 10 313
+ - - + + - - + + - - + EXA-50E 70 122 268 10 313
e
1+ 2- 3 IGN 4 5- 6+ 1+ 2- 3 IGN 4 5- 6+ 1+ 2- 3 IGN 4 5- 6+

EOL
Test
Lamp
Test
Lamp
Test
Test
Lam p
Lamp Descriptions
County of Manufacture Malaysia
NOTE: Refer to the Fire Control Panel Igniter Resistance 2.0 - 4.0 Ω
Control Panel
Discharge Output for End of Line resistor value. Reliable Activation Current 1.0A@10ms
Terminals Temperature Range -50ºC to +65ºC
Min Design Concetration 100g/m3 (Class A surface
;
For Non-Supervised Control System 200g/m3
Service Life 5 to 10 years (Normal application)
TFM #1 TFM #2 TFM #n Material Mild Steel (Large EXAs);
IIU REV:
R
Dß
Y
TBL
IIU REV:
R
Dß
Y
TBL
IIU REV:
R
Dß
Y
TBL Stainless Steel (Small EXAs)
Finish Epoxy powder Coated (Large EXAs)
DIP DIP DIP
SWITCH SWITCH SWITCH

Handling and Transport:

+ - - + + - - + + - - + ation Code : 4.1 Class A — Combustible Solids
UN No. : 3178 Class B — Flammable Liquids
1+ 2- 3 IGN 4 5- 6+ 1+ 2- 3 IGN 4 5- 6+ 1+ 2- 3 IGN 4 5- 6+
Packing Group : III Class C — Flammable Gases
Test Test Test
Test
Hazchem Code : 1[T] Class E — Electrically Energised Fire
Lamp Lamp Lam p
Lamp
Limitations of use:
rapid oxidation in the absence of air, reactive metals, metal hydrides or metal amides, certain organic
peroxides and hydrazine, and pyrophoric materials. (Refer to AS/NZS 4487:1997 - item 1.7.4)
Control Panel
Discharge Output CAUTION:
Terminals
aerosol extinguishing agent discharge residue on sensitive equipment and other objects