Magnum Gate Valve

and Other Valves

LEADING
THROUGH
INNOVATION
www.womgroup.com
TABLE OF
CONTENTS
Patented Dual-Seal™ Technology..........................................................................4

Magnum Gate Valve

Magnum Gate Valve Unique Feature......................................................................... 5
Magnum Gate Valve Components............................................................................ 6
Magnum Gate Valve Specifications........................................................................... 7
Gate Valve Standard Trims........................................................................................... 8
Gate Valve Standard Trim Chart.................................................................................. 9

Model 200M Gate Valve

Model 200M Gate Valve Features and Benefits................................................................ 10
Model 200M Gate Valve Specifications.............................................................................. 11

Magnum Mud Gate Valve

Model 200M Gate Valve Features and Benefits................................................................ 12-13

Magnum Line Pressure Operated Surface Safety Gate Valves (LPOSSV)

Magnum LPOSSV Features and Benefits............................................................................. 14

Typical Magnum Gate Valve Applications............................................................15

Magnum Subsea Gate Valve and Actuator

Magnum Subsea Gate Valve Features and Benefits................................................. 16
Magnum Subsea Gate Valve with Fail-Safe Actuator............................................... 17

WOM’s Other Dependable Valves

Model WV 200 Gate Valve Features and Benefits..................................................... 18
Check Valve Features and Benefits............................................................................. 18
Model 600 Mud Valve Features and Benefits............................................................. 19
 Magnum Gate Valves

TM

Patented Dual-Seal Technology TM

WOM’s Magnum Gate Valve provides sealing reliability that is unmatched in the industry.
The patented design has been proven in hundreds of well control applications during drilling, testing,
production, in onshore, offshore and subsea.

The key to Magnum’s superior bi-directional sealing is the “Dual-Seal™” system. This unique “Thru-
Conduit” design provides both upstream and downstream sealing, creating pressure-energized
balance between the slab gate and the seat assemblies. The “Dual-Seal™”seats expand against the
gate when subject to line pressure to form a positive metal-to-metal seal.

The body cavity is exposed to line pressure only during valve opening and closing, ensuring better
lubricant retention, less exposure to line contaminants and longer service life with less maintenance.

Advantages of the Magnum Design

Gate in the CLOSED Position Gate in the CLOSED Position Gate in the OPEN Position
Primary Upstream Seal presses against If the Primary Upstream Seal fails, the Primary Upstream & Downstream Seals
the gate to provide a seal and avoid Secondary Downstream Seal takes over press against the gate to provide a seal
intrusion into the body cavity. to avoid intrusion into the thru-bore. and avoid intrusion into the body cavity
and thru-bore.
Zero Leak
The heart of this bidirectional valve is Longer Life
the MAGNUM “Sure Seal”. This simple Protection against line ladens will
gate/seat assembly eliminates gate lengthen a valve’s service life. WOM’s
guides, seat skirts and springs. Instead, extensive metallurgy expertise insures
line pressure expands the seat assembly material selection will be suitable even
against the gate forming a true for harsh CO2or H2S applications.
upstream seal.

4
4
Worldwide Oilfield Machine

Magnum Gate Valve

Magnum Gate Valve Unique Features:

• Available in sizes ranging from 1-13/16” to 9”
• Working pressure ratings of 2,000 to 20,000 psi
• Full Bore, Through-Conduit Seal
• Bi-Directional Sealing
- Primary (Upstream) Seal
- Secondary (Downstream) Seal
• Lower Torque
- Floating Gate with T-Slot
- Centralized stem threads
- Superior finish on gates and seats
- Balanced forces on gate and seats
• Longer Life of Gate and Seals
- Minimal exposure to contaminants
- Minimal lubricant loss
• Elastomer Assist Metal-to-Metal Seal or 
Non-Elastomeric Seals
• Differential Avoids Pressure Lock
• Extended Service Life with Minimum
Maintenance Requirements

Elastomeric &
Non-Elastomeric Seals
T-SLOT GATE BENEFITS

Low Torque
An independent stem nut allows the gate
to float, maintaining contact with the
seats without binding on the stem. Better
retention of lubricant in the body cavity
reduces build-up of contaminants which
can increase torque.

5
 Magnum Gate Valves

Magnum Gate Valve Components

Handwheel 1
2 Bearing Cap
Seal Ring 4
10 Packing Assembly
Grease Fitting 14 (Stem Packing)
16 Operating Stem
Stud 12

Bonnet 13 11 Nut
Bonnet
Gasket 15 21 Bleeder Plug
18 T- Nut
Gate 17

24 Seal Assembly

Grease Fitting 14
20 Body

Typical MAGNUM Gate Valve Bill of Material

Item Description Qty. Item Description Qty.

1 Handwheel 1 13 Bonnet 1

2 Bearing Cap 1 14 Grease Fitting 2

3 Alemite Fitting 2 15 Bonnet Gasket* 1

4 Seal Ring* 2 16 Operating Stem 1

5 Thrust Bearing* 2 17 Gate* 1

6 Seal Ring* 1 18 T-Nut 1

7 Stem Adapter 1 19 Seal Ring* 1

8 Stem Pin 1 20 Body 1

9 Packing Gland 1 21 Bleeder Plug 1

10 Packing Assembly* 1 22 Seal Ring* 1

11 Nut 8+ 23 Bolt with Nut 1

12 Stud 8+ 24 Seal Assembly* 1

*Recommended Spare Parts.
Note: One (1) set of spares are recommended per four (4) valves.

6
Worldwide Oilfield Machine

Magnum Gate Valve Specifications

7
 Magnum Gate Valves

Gate Valve Standard Trims

Standard Trim (AA) Super Trim (DD)
For general non-corrosive oil and gas service such For general sour oil and gas service with H2S and
as manifolds, Christmas trees, flowlines and other CO2. For applications where resistance to sulphide
applications. stress cracking is required due to H2S conditions.

Stainless Trim (BB) Stainless Super Trim (EE)
For general corrosive oil and gas service with For corrosive and sour oil and gas service where
limited CO2 and no H2S present. The applications resistance to both sulphide stress cracking and
require chrome stainless steel internal parts and weight loss corrosion are required due to H2S and
limited corrosion on internal body surfaces is CO2.
acceptable.
Full Stainless Super Trim (FF)
Full Stainless Trim (CC) For sour gas and oil when CO2 content exceeds
For general corrosive oil and gas service with the H2S content. Intended to provide resistance to
extreme CO2 and no H2S present. For applications the metal loss type of corrosion usually associated
where resistance to corrosion due to CO2 is with CO2 plus resistance to Hydrogen Sulfide
required. embrittlement.

Special Super Trim (HH)

For extremely high concentrations of H2S and CO2
applications.

8
 Worldwide Oilfield Machine

Gate Valve Standard Trim Chart

Material
Body Bonnet Gasket Gate Seats Stem Seat Retainer T-Nut Balance Rod
Class
Carbon Steel
AA 4130 4130 4140 HF 4140 HF 4130 17-4H 4130 4130
CAD Plated
BB 4130 4130 316/304 SS 410 HF 410 QPQ, 410 HF 17-4PH QPQ 410 410 410

CC 410 410 316/304 SS 410 HF 410 QPQ, 410 HF 17-4PH QPQ 410 410 410

DD-0.5* 4130 4130 316 SS 4140 HF 4140 HF 17-4 PH QPQ 17-4 PH 4130 410

DD-1.5 4130 4130 316 SS 4140 HF 4140 HF 4140 QPQ 410 4130 410

DD-360 4130 4130 316 SS 4140 HF 4140 HF 4140 QPQ 410 4130 410

DD-NL 4130 4130 316 SS 4140 HF 4140 HF 4140 QPQ 410 4130 410

EE-0.5* 4130 4130 316 SS 410 HF 410 HF 17-4 PH QPQ 17-4 PH 410 410

EE-1.5 4130 4130 316 SS 410 HF 410 HF 4140 QPQ 410 410 410

EE-360 4130 4130 316 SS 410 HF 410 HF Inconel 718 410 410 410

EE-NL 4130 4130 316 SS 410 HF 410 HF Inconel 718 410 410 410
(-200 to 2500F)
EE-NL 410
4130 4130 316 SS 410 HF 410 HF Inconel 725 410 410
(-200 to 3500F)

FF-1.5 410 410 316 SS 410 HF 410 HF 4140 QPQ 410 410 410

FF-360 410 410 316 SS 410 HF 410 HF Inconel 718 410 410 410

FF-NL
410 410 316 SS 410 HF 410 HF Inconel 718 410 410 410
(-200 to 2500F)

FF-NL 410
410 410 316 SS 410 HF 410 HF Inconel 725 410 410
(-200 to 3500F)
4130 w/Inconel 4130 w/Inconel
HH-NL
625 inlay in all 625 inlay in all Inconel 825 Inconel 718 HF Inconel 718 HF Inconel 718 Inconel 718 Inconel 718 Inconel 718
(-200 to 2500F)
we�ed areas we�ed areas QPQ

4130 w/Inconel 4130 w/Inconel

HH-NL
625 inlay in all 625 inlay in all Inconel 825 Inconel 725 HF Inconel 725 HF Inconel 725 Inconel 725 Inconel 725 Inconel 725
(-200 to 2500F)
we�ed areas we�ed areas QPQ

Notes: Working Pressure Ra�ng Chart

• This PSIChart is based 2000 on API3000 6A 20th Edition 5000 & Nace 10000 MR 0175 Second 15000 Edition20000

• AllMPa 13,8
Sub-Sea valve Stems shall be Inconel.
20,7 34,5 69,0 103,5 138,0

• For -50°F Temperature, there is no change with the valve materials

• Materials shown are for reference purposes only and are subject to change.
• Special trims and materials are available, such as duplex stainless steel for bodies and bonnets, Inconel HF for gates
This Chart is based on API 6A 20th Edi�on & Nace MR 0175 Second Edi�on
All Sub-Sea valve Stems shall be Inconel.
and seats, and Inconel for stems.
• -50°F
For Abbreviations:
Temperature, thereSS-Stainless
is no change withSteel;
the valveQPQ-Quench
materials Polish Quench; HF-Stellite/ Colmonoy, W/HF-Hard Facing.
• -75°F (-59°C) available upon request.
* Trim DD-0.5 & EE-0.5 is only for use in Mud Valves, Pump Savers, Standpipe Manifolds, & Cement Manifolds

• Wire-line and fire safe valves available upon request.

⁽²⁾ For EE/FF (0.5 to NL) Trims:

• Use 410 Gates & Inconel Skirted Seats with #4 Colmonoy for (3-1/16"-15K, 20K), (4-1/16"-10K, 15K), (5 1/8"-10K), (6", 6-1/8, 6-3/8", 7 -1/16", 7-3/8"-10K)
High temperature (450°F) (232°C) valves available upon request.
Use Inconel Gates & Inconel Seats for (4-1/16"-20K): Select Inconel 718 for EE/FF (1.5,360,NL) (P+U) , Select Inconel 725 for EE/FF-NL (P+X)
• QPQ Seats have an option of Colmonoy Hard-Facing.
• Alternate material for Stems-Inconel 725
• Alternate material for HH Trims-Duplex SS

9
 Magnum Gate Valves

Model 200M Gate Valve

The field-proven and versatile Model 200M Gate Valve provides the reliability and interchangeability
necessary for a wide range of demanding flow control applications, including Manifolds and
Christmas trees.

Features and Benefits

• Available in sizes 1 13/16” - 7 1/16”
• Working pressure ratings from 2,000 psi-15,000 psi
• Forged body and bonnet for the highest mechanical integrity
• Bi-directional flow design offers versatility and increased
service life
• Full bore, Through-Conduit Seal
• Grease injection fitting located in bonnet, eliminating body
penetration
• Bearing cap grease fitting allows positive bearing lubrication
• Available in standard flange ends, butt weld ends and block
body configurations
• Can be equipped with pneumatic or hydraulic actuators
• The 200M Gate Valve has been API 6A fire tested to 450ºF
and can be fitted for HPHT service

Model 200M Gate Valve

10
Worldwide Oilfield Machine

Model 200M Gate Valve Specifications

11
 Magnum Gate Valves

Magnum Mud Gate Valve

Magnum Mud Gate Valves are specially designed for mud, cement, fracturing and water service to handle
high and fluctuating pressure and abrasives. WOM mud valves are forged bodied and through conduit.

GATE

JUNK RING

SEAT RETAINER

SKIRTED SEAT Skirted DUAL-SEAL

TM

Seat Assembly

Magnum Mud Gate Valve

Unlike other mud gate valves, the Magnum Mud Gate Valve with skirted seats, seals “Thru-Conduit” in both
“Full-Open” and “Full-Closed” positions. “Thru-Conduit” sealing eliminates the turbulence experienced in
the paddle gate mud valve design. Unlike the paddle gate mud valve, the Magnum Mud Gate Valve
with added seat skirts, prevents contaminants from entering the gate valve body cavity.

12
Worldwide Oilfield Machine

Magnum Mud Gate Valve

Features and Benefits
• Available is sizes 1 13/16”- 5”
• Working pressure ratings of 3,000-15,000 psi
• Features WOM’s patented Magnum Dual SealTM system
• Skirted seat assembly prevents contaminants from entering the valve body
cavity
• Hardfacing of components ensures better protection highly corrosive, erosive and
abrasive conditions
• Thru-Conduit seal eliminates the turbulence experienced in paddle gate mud valves
• Can be easily serviced in-line and all internal components can be inspected
and replaced
• Body cavity is exposed to line pressure only during valve opening and closing
• Better lubricant retention, less exposure to line contaminants and longer service life
than comparable valves
• Fewer replacement parts reduce spare parts inventory
• Available in standard flange ends, hammer union, hub, threaded, or butt weld ends
• Adaptable to all types of WOM actuators and pressure control equipement
• Meet and exceed API 6A and 6D Standards and ISO quality requirements

13
 Magnum Gate Valves

Magnum Line Pressure Operated

Surface Safety Gate Valve
WOM’s Line Pressure Operated Surface Safety Gate Valves
(LPOSSV) are ideal where control pressure is not available. The
system consists of a surface safety gate valve, high pressure
pilot, low pressure pilot and a velocity check valve.

Features and Benefits

• Available in sizes 1 13/16” – 7 1/16”
• Working pressure ratings of 2,000-20,000 psi
• Ideal for single point protection
• Self-operating system which uses line pressure as
control pressure to activate the actuator
• High and low pressure pilots sense line pressure
continuously. Abnormal pressure changes cause the pilots to
exhaust control pressure from the safety valve, closing the valve
• Centralized stem threads and T-nut combined with T-slot gate WOM
reduce the overall torque needed to cycle the valve Hydraulic
Actuator
• Colmonoy 4,5 & 75, Tungsten Carbide, Stellite and
other HF materials are available
• Compatible with elastomer-asist metal-to metal seals
or non-elastomeric seals

Low &
Veloci- High
ty Check Pressure
Valve Pilots

Magnum
Magnum LPOSSV Dual-Seal
Assembly

14
Worldwide Oilfield Machine

Typical Magnum Gate Valve

Applications

Wellheads Choke & Kill

Manifolds

Flowheads Cement
Manifolds

Standpipe Manifolds

15
 Magnum Gate Valves

Magnum Subsea Gate Valve

The Magnum Subsea Gate Valve and Actuator are designed for deepwater applications. The Magnum
Subsea Actuator design has been tested to a water depth of 13,200 and meets all specifications for
subsea wellhead and Christmas tree applications. In additional testing, the actuator has been cycled
5,000 times at full working pressure, providing reliability and safety in the most demanding subsea
operations.

Features and Benefits

• Available in sizes ranging from 2 1/16” through 7 3/8” and working pressures up to 15,000 psi
• Designed, built and tested to API 6A and 17D
• Magnum Subsea Valve design tested to a water depth of 13,200 feet
• Anti-explosive decompression seals and energized non-elastomeric lip seals
• Metal to metal seal-seat to gate
• Magnum “Dual-Seal” seat design seals upstream and downstream
• With Magnum “Dual-Seal” seat design seals “thru-conduit”, bonnet can be removed and
replaced while the valve is in working condition. This will minimize the maintenance time and
inventory cost for customers
• Gate and seat faces are hard faced with Colmonoy 4, 5 & 75 and polished to 1-2 RMS.
This is for wear resistance and low operating torque. Tungsten Carbide, Stellite and other HF
material are also available
• Cladding of “all wetted parts” is available
• “T” Slot stem and gate connection allows the gate to “Float” between seats without
misaligning the stem under pressure

The Magnum Subsea Gate

Valve is available as Dual
Block in sizes up to 7 1/16”
and in working pressure
up to 20,000 psi.

16
Worldwide Oilfield Machine

Magnum Subsea Gate Valve

with Fail-Safe Actuator

Single forged unitized top cap and cylinder for

simple in-line maintenance

Actuator body completely contains compressed

spring

Quick disconnect mechanism allows fast removal

without disturbing body/bonnet connection.
Provides immediate access to stem packing

Factory preset drift eliminates need for field adjustment

“T” slot stem and gate connection allow gate to

‘’float’’ between seats without misaligning the stem

Gate and seat faces are hard-faced and polished for

wear resistance and low operating torque

Full bore through-conduit flow in full open position

Magnum “Sure-Seal” mechanism is pressure-

energized for upstream/downstream sealing,
equalizing line pressure on both sides of the gate

17
 Magnum Gate Valves

WOM’s Other Dependable Valves

Model 500 Gate Valve
Features and Benefits
•Available in sizes 1-13/16” to 7-1/16”
•Working pressure ratings from 3,000 psi-15,000 psi
•Forged body and bonnet for the highest mechanical integrity
•Bi-directional sealing, seat to Body and Gate to Seat
•Grease injection fitting located in bonnet, eliminating body
penetration
•Bearing cap grease fitting allows positive bearing lubrication
•The unique Wedge Guide design protects the Seat seal from
damage and exposure to well pressure
•Body pocket Seat sealing area is protected from foreign
particles entering and damaging the area
• Seat Assembly is locked in place providing a perfect
downstream seal.
Model 500 Gate Valve • Stem metal-to-metal backseat with Bonnet to isolate stem
packing and allows stem packing to be replaced while valve is
under pressure

Check Valves
Designed for the prevention of back flow in high
pressure and/or high temperature mud lines, choke
& kill manifolds, Christmas trees injection and kill lines.

Features and Benefits Standard Type “R” Check Valve

• Available in sizes 1-13/16” through 4-1/16”

(Larger sizes available upon request)
• Available in working pressure ratings of 3,000-
20,000 psi
• Check Valves can be configured with flanged,
butt weld, hub type, or a combination of end
connections to suit customer’s specifications.

Lock-Open Type Check Valve

18
Worldwide Oilfield Machine

WOM’s Other Dependable Valves

Model 600 Mud Valve
The Model 600 Mud Valve was designed for corrosive CO2 injection and waterflood applications in the
enhanced oil recovery market. It is commonly used for applications such as high pressure mixing lines,
standpipe manifolds, wellheads, production manifolds and production gathering systems.

Features and Benefits

• Available in sizes 1-13/16” - 5-1/18”
• Available in working pressures from 5,000 psi and 7,500 psi
• Floating slab gate design
• Heavy duty roller bearings
• Seat assembly engineered with “lock shell” ensures accurate
seat alignment
• Available with threaded, welded and flanged end connections
• Rising stem design with visual position indicator lens
• Replaceable stem packing

Model 600 Mud Valve

19
WORLDWIDE LOCATIONS
Worldwide Oilfield Machine, Inc.
Headquarters/ U.S.A
11809 Canemont Street Worldwide Oilfield Machine, Inc
Houston, Texas 77035 USA 4707 SCR 1210
Phone: +1 (713) 729-9200 Midland, Texas 79706-305349
Fax: +1 (713) 729-7321 Phone: + (832) 908-4154

Worldwide Oilfield Machine Ltd. - UK

Worldwide Oilfield Machine, Inc.
7 St Machar Road Aberdeen
5800 Cunningham
AB24 2UU Scotland, UK
Houston, Texas 77041 USA
Phone: +44 (01224) 484400
Phone: +1 (713) 937-0795
Fax: +44 (01224) 489740
Fax: +1 (713) 937-8574
Worldwide Oilfield Machine Pvt. Ltd - India
Worldwide Oilfield Machine, Inc. Gat No. 778, at Post Velu
11625 Fairmont St. Pune Satara Rd.
Houston, Texas 77035 USA Tal. Bhor, Dist. Pune 412 205. India
Phone: +1 (713) 721-5200 Phone 1: +91-8308210300
Fax: +1 (713) 721-5205 Phone 2: +91-8308215300

Worldwide Oilfield Machine - Subsea Worldwide Oilfield Machine, M.E. - U.A.E

11400 Tanner Rd. Jebel Ali Free Zone (JAFZA) South,
Houston, TX 77041 Plot# S61302, Near Gate#12, P.O. Box: 32478
Phone: +1 (713) 937-8323
Dubai (UAE)
Fax: +1 (713) 937-8574
Phone: +971-4 81 63 600
Fax: +971-4 81 63 601
PT Worldwide Oilfield Machine - Indonesia Worldwide Oilfield Machine - Korea
#11-08 One Pacific Place #1012, 481-10, Byucksan Digital Vally-II,
Sudirman Central Business District Gasandong, GumchonGu,
Jl. Jenderal Sudirman Kav. 52-53, Jakarta 12190 Seoul, Korea 153-803
Phone: +65 6690 1792 Phone: +82 2 854 6806

WOM Brazil LTDA Worldwide Oilfield Machine Asia Pacific Pte. Ltd.
Rua Lady Esteves da Conceição 119 - Singapore
Macae, RJ, 27933-420, BRAZIL 17 Gul Way
Phone: +55 22 3081-3500 Singapore 629194
Phone: +65 6690 1700
Worldwide Oilfield Machine, Inc.- Turkmenistan Fax: +65 6560 3859
Yimpash Business Centre
Turkmenbashy Shayoly 54
Office #308 3rd Floor
Ashgabat –Turkmenistan 744000 WORLDWIDE SERVICE CENTERS
Phone 1: +99-365 820130
Phone 2: +99-365 309757 •CANADA •EGYPT
•MEXICO •OMAN
Magnum Technology Center •BRAZIL •KUWAIT
Plot # S61301, Jebel Ali Free zone (South)
Dubai (UAE)
•ARGENTINA •MYANMAR
Phone: +971-4 81 08 600 •TRINIDAD AND TOBAGO •CHINA
Fax: +971-4 81 08 601 •NORWAY •JAPAN
•FRANCE •KUALA LUMPUR
•ALGERIA •AUSTRALIA
WOM proudly celebrates 40 years of providing the oil & gas industry
with meticulously designed, well-engineered pressure and flow
control equipment. WOM looks forward to continuing to make a
positive impact on the process of safely extracting one of the world’s
most precious resources. We are honored to work with the businesses
that have trusted our commitment to excellence and appreciate
each member of our group that has contributed to our success.
 Disclaimer. This catalog is published for informational purposes only. All previous catalogs are not valid and should not be used as a reference in any form.
We are Worldwide Oilfield Machine (WOM) - a global company
pioneering Flow Control Solutions for the Surface & Subsea sectors
of the oil & gas industry. Headquartered in Houston, Texas, we have
manufacturing facilities, engineering centers, sales offices and
assembly/testing workshops all over the world.

Our strength is our robust infrastructure that allows us complete

control over quality, costs and delivery. With more than 20 patents
and noted accreditations, our very own R&D facilities and 24x7
service centers across the globe we have the required capabilities
& resources to deliver all your manufacturing needs for the industry.

www.womgroup.com

Rev.January 2020

facebook.com/womglobalgroup
instagram.com/womglobalgroup
twitter.com/womglobalgroup
linkedin.com/company/worldwideoilfieldmachine