Cat ®
Cold Planers
Skid Steer Loaders
Compact Track Loaders
Compact Wheel Loaders
Cat® Cold Planers are designed for small paving jobs in
residential and commercial applications, and are primarily Independent left/right depth control
used to economically restore asphalt and concrete surfaces. n Independent left/right depth control allows maximum drum
They are ideal for milling imperfections prior to resurfacing, depths to be adjusted independently on each skid. Gauges
removing deteriorated pavement, removing traffic lane stripes are easily viewable from the cab. Independent depth
and jobs where the use of dedicated planers is limited. control is mechanical on the PC104 and PC105 models;
hydraulic independent depth control is standard on the
Features: PC305-PC412 models.
Direct drive system
n Direct drive system on the PC104 features a variable speed, Replaceable Skid Plates
uni-directional, gerotor-style hydraulic motor. Direct drive n Easilyreplaceable, wear-resistant skid shoes remain
system on the PC105, high flow, high flow XPS and XHP/XE parallel to the ground for optimum stability.
features a hydraulic radial piston motor to ensure maximum
cutting rate and drum torque for optimal production Cut Mark
performance and efficiency. n Indicatescontact point of drum with surface based on
depth of cut, so an assistant can communicate with the
Self-leveling design operator when to start and stop the cut.
n Self-levelingdesign automatically levels cold planer when
placed on the ground for consistent depth control without Drum Center Indicator
operator adjustments and excellent spoil retention. n Indicates center of the drum on the side of the planer.
Float, spring tilt and hydraulic tilt Bit Options
n Float enables planers to follow the contour of the surface. It is n Allpurpose conical bits are standard. Optional concrete
activated by turning a handle and is only available high flow, bits, heavy duty concrete bits, and heavy duty asphalt
high flow XPS and XHP/XE planers. Spring tilt and hydraulic tilt bits are also available. Tools to change out the bits are
enable planers to oscillate for angled cuts. Tilt is hydraulically included.
controlled on high flow models and spring controlled
on standard flow planers. Optional Integrated Water Tank
n Coupler frame-mounted water tank provides 42 gal (160 L)
Max Pro Pressure Gauge capacity. Can be combined with cab-mounted water tank
n Max Pro Pressure Gauge provides operator feedback to for additional capacity and run time. PC306 and PC406
adjust ground speed for maximum productivity in changing available with water tank installed. Water tank kit available
material loads. Gauge displays planer performance in real-time for all models except XD models.
conditions and is visible from the cab. Standard on all models.
Hydraulic side-shift
n Hydraulic side-shift permits close planing to curbs,
walls and other obstructions.
Cat Cold Planers
®
Compatibility
Model Machines
PC104 216B3, 226B3, 226D3, 232D3, 236D3, 239D3, 242D3, 246D3, 249D3, 257D3, 259D3, 262D3, 272D3, 272D3 XE, 279D3, 289D3, 299D3,
299D3 XE, 906M, 907M, 908M
PC105 216B3, 226B3, 226D3, 232D3, 236D3, 239D3, 242D3, 246D3, 249D3, 257D3, 259D3, 262D3, 272D3, 272D3 XE, 279D3, 289D3,
299D3, 299D3 XE, 906M, 907M, 908M
PC305* 226D3, 232D3, 236D3, 239D3, 242D3, 246D3, 249D3, 257D3, 259D3, 262D3, 272D3, 272D3 XE, 279D3, 289D3, 299D3, 299D3 XE,
906M, 907M, 908M
PC306* 226D3, 232D3, 236D3, 239D3, 242D3, 246D3, 249D3, 257D3, 259D3, 262D3, 272D3, 272D3 XE, 279D3, 289D3, 299D3, 299D3 XE,
906M, 907M, 908M
PC306 Water* 246D3, 262D3, 272D3, 272D3 XE, 279D3, 289D3, 299D3, 299D3 XE, 906M, 907M, 908M
PC306 XD^ 272D3, 272D3 XE, 279D3, 289D3, 299D3, 299D3 XE
PC310* 246D3, 262D3, 272D3, 272D3 XE, 279D3, 289D3, 299D3, 299D3 XE, 906M, 907M, 908M
PC310 XD^ 289D3, 299D3, 299D3 XE
PC406 272D3 XE, 299D3 XE
PC406 Water 272D3 XE, 299D3 XE
PC408 272D3 XE, 299D3 XE
PC412 272D3 XE, 299D3 XE
*Requires high flow or high flow XPS option on machine. Operates in high flow XPS on XE machines. Requires high flow option on compact wheel loaders.
^Requires high flow XPS option on machine. Operates in high flow XPS on XE machines. Water kit not available on XD models.
Current production machines listed. Machine model availability and attachment vary by region. Contact your local Cat dealer for exact compatibility and availability.
Depth Gauge
Easy access to maintain
Float feature allows planer to
and replace conical bits
follow undulating road surfaces
Optional integrated water tank
housed inside coupler frame
Multiple bits available:
• All Purpose – Standard Individually adjustable and
• Concrete replaceable skid shoes
• Heavy Duty Concrete Cut mark indicator Drum center indicator
• Heavy Duty Asphalt shows contact point of locates center of drum
drum on ground surface
Low-profile
design improves
operator visibility
Water sprinkler
kits available
SSL quick
coupler allows
for simple tool
changes
Max-pro gauge provides operator feedback
to maximize productivity. Yellow, Green and
Red regions indicate planer operation status:
• Yellow – Operating below capacity, travel
speed can be increased
• Green – Ideal zone of operation for Direct drive translates all Self-leveling planer adjusts
maximum productivity torque straight to the ground to be flat on ground regardless
• Red – Risk of stalling, travel speed should of coupler orientation
be decreased
2 Cold Planers for SSL/CTL/CWL
Cat Cold Planers
®
Specifications
B C
PC306 with
PC104 PC105 PC305 PC306 PC306 XD
Water Tank
A Overall Width mm (in) 1728 (68) 1728 (68) 1858 (73) 1858 (73) 1858 (73) 1858 (73)
B Working Width mm (in) 350 (14) 450 (18) 450 (18) 600 (24) 600 (24) 600 (24)
C Overall Length mm (in) 1117 (44) 1182 (47) 1248 (49) 1248 (49) 1432 (56) 1576 (62)
D Overall Height mm (in) 941 (37) 928 (37) 930 (37) 930 (37) 930 (37) 1113 (44)
Weight kg (lb) 682 (1504) 739 (1629) 848 (1870) 956 (2108) 1218 (2685) 1410 (3109)
Max Cutting Depth mm (in) 150 (6) 150 (6) 170 (7) 170 (7) 170 (7) 250 (10)
Required Hydraulics Standard Flow Standard Flow High Flow High Flow High Flow High Flow XPS
Optimal Hydraulic Flow lpm 60-80 80-115 98-125 98-125 98-125 98-125
(gpm) (16-22) (21-30) (26-33) (26-33) (26-33) (26-33)
Optimal Hydraulic bar 210-230 210-230 230-280 230-280 230-280 230-280
Pressure (psi) (3050-3300) (3050-3300) (3300-4000) (3300-4000) (3300-4000) (3300-4000)
Drum Torque at N-m 1399 1902 3233 3233 3233 4664
Max Pressure (ft-lb) (1032) (1403) (2385) (2385) (2385) (3440)
Drum Speed at Max Flow rpm 181 191 149 14 149 119
Side Shift Travel mm (in) 650 (26) 650 (26) 750 (30) 750 (30) 750 (30) 650 (26)
Tilt Angle degrees ±8.5 ±8.5 ±8 ±8 ±8 ±5.5
Optional Drum mm (in) 400/150 (16/6) 75/200, 80/200, 80/200, 80/200, N/A
Widths/Depths 150/200, 150/200 150/200, 150/200,
200/200, 300/200 300/200, 300/200,
300/200, (3/8, 6/8, 12/8) 450/200, 450/200,
450/150 600/170 600/170
(3/8,6/8, 8/8, (3/8, 6/8, 12/8, (3/8, 6/8, 12/8,
12/8, 18/6) 18/8, 24/7) 18/8, 24/7)
Conical Bits 36 42 42 54 54 48
Cold Planers for SSL/CTL/CWL 3
Cat Cold Planers
®
Specifications
B C
B
C
PC406 with
PC310 PC310 XD PC406 PC408 PC412
Water Tank
A Overall Width mm (in) 1858 (73) 1858 (73) 1858 (73) 1858 (73) 1858 (73) 1858 (73)
B Working Width mm (in) 1000 (39) 1000 (39) 600 (24) 600 (24) 750 (30) 1200 (47)
C Overall Length mm (in) 1125 (44) 1498 (59) 1270 (50) 1453 (57) 1270 (50) 1140 (45)
D Overall Height mm (in) 935 (37) 1099 (43) 951 (37) 951 (37) 951 (37) 935 (37)
Weight kg (lb) 1040 (2293) 1741 (3838) 987 (2176) 1249 (2754) 1045 (2304) 1160 (2557)
Max Cutting Depth mm (in) 130 (5) 220 (9) 170 (7) 170 (7) 170 (7) 130 (5)
Required Hydraulics High Flow XPS High Flow XPS High Flow High Flow High Flow High Flow
XHP/XE XHP/XE XHP/XE XHP/XE
Optimal Hydraulic Flow lpm (gpm) 98-125 (26-33) 98-125 (26-33) 136-150 (36-40) 136-150 (36-40) 136-150 (36-40) 136-150 (36-40)
Optimal Hydraulic bar 230-280 230-280 250-280 250-280 250-280 250-280
Pressure (psi) (3300-4000) (3300-4000) (3630-4000) (3630-4000) (3630-4000) (3630-4000)
Drum Torque at N-m 3117 4985 4349 4349 4349 3854
Max Pressure (ft-lb) (2299) (3677) (3208) (3208) (3208) (2843)
Drum Speed at Max Flow rpm 155 111 133 133 133 148
Side Shift Travel mm (in) 587 (23) 650 (26) 650 (26) 650 (26) 650 (26) 515 (20)
Tilt Angle degrees ±6.5 ±5.5 ±6.5 ±6.5 ±6.5 ±6.5
Optional Drum mm (in) N/A N/A N/A N/A N/A N/A
Widths/Depths
Conical Bits 78 66 54 54 60 90
For more complete information on Cat products, dealer services, and industry solutions, visit us on the web AEHQ8291 (05-2020)
at www.cat.com (Global)
© 2020 Caterpillar
All rights reserved
Materials and specifications are subject to change without notice. Featured machines in photos may include
additional equipment. See your Cat dealer for available options.
CAT, CATERPILLAR, LET’S DO THE WORK, their respective logos, “Caterpillar Corporate Yellow,” the “Power
Edge” and Cat “Modern Hex” trade dress as well as corporate and product identity used herein, are
trademarks of Caterpillar and may not be used without permission.
