Fevicol 701 IS
------------------------------------------------------------------------------------
PRODUCT DESCRIPTION:
Fevicol 701 IS is sprayable synthetic rubber based solvent containing contact adhesive. The adhesive
dries to a tough flexible film with good resistance to heat and aging. It demonstates fast initial strength
and good contact capability. When used as two way adhesive to open time for assembly is not a
constraint, but when considered for one way application the assembly should be done within short
time.
TYPICAL PROPERTIES
Sr.No. Properties Unit Typical Data
1 Appearance - Clear to Slight Hazy Yellow liquid
2 Viscosity at 30 oC ( By Brookfield viscometer) Poise 0.7-1
3 Density gm/ml 0.7-0.9
4 % Solids % 34–36
5 Diluent/Cleaner - Toluene
6 Drying time Seconds 10- 180
7 Tack retention time Minutes Max. 30
Peel Strength : (after curing 24hrs at ambient
8 temp.) Painted MS to Foam Cloth Kg/inch 1.8 - 2.5
9 Operating temp. Deg C -20 to 75
APPLICATION AREAS:
Fevicol 701 IS is a multipurpose adhesive and suitable for the automotive industry as a high
performance trim adhesive. It forms a strong permanent contact bond between the following materials :
Painted steel, Plywood, Chipboard, Polyurethane foam, Foam rubber, Felt, supported PVC sheet Fabrics,
Leather etc. It will not bond plastics like Teflon, Polythene & it should never be directly applied on
substrates affected by solvents like Thermocol.
APPLICATION PROCESS:
1. The substrates to be bonded must be clean, dry free from oil, grease etc. Trichloroethylene / Acetone
may be used for Cleaning.
2. Apply uniform coat of adhesive on both substrates to be bonded, using an air supported spray-gun
with 1.6 .2.0 mm nozzle orifice from a distance of 2-3 feet at 3.5 .5.0 Kg/cm2 air pressure.
3. Bring both the substrates together with perfect alignment and press firmly. Sufficient pressure is
mandatory to obtain satisfactory coalescence of the two adhesive films. The contact bond offers
sufficient initial strength for immediate handling. The bonded assembly need not be kept under
pressure. The bond cures further and attains peak strength in 3-4 days.
TDS Ref : 009DCXXX/X.X/01.05.2020 009FR012/1.1/01.05.2020
Pidilite Industries Limited,
Ramkrishna Mandir Road, Post Box No. 17411, Andheri (E) Mumbai 400059 INDIA
Tel +91-22-2835 7000 • Fax +91-22-2835 7008
website:www.pidilite.com • E-mail:
[email protected] • Toll Free No.: 1800-266-6066
Fevicol 701 IS
------------------------------------------------------------------------------------
Coverage: Approx 250-350 gms per square meter on non - porous substrates.
However coverage quantity may vary on porous substrates like wood, leather etc.
PACKAGING INFORMATION:
30 Lit.
STORAGE AND HANDLING:
Store the containers in well sealed condition away from heat and source of combustion or sparks.
Proper ventilation must be provided on the shop-floor. A detailed MSDS is available on request
SHELF-LIFE : This product will remain suitable for it.s intended purpose for up to 12 months when stored
under recommended conditions in the original sealed container.
DILUENT/CLEANER : Solvent Toluene may be used to clean the tools/spray gun used for the application.
DISCLAIMER:
The Product information and application details given by the company and its agents has been provided
in good faith and meant to serve only as a general guideline during usage. Users are advised to carry out
tests and take trials to ensure on the suitability of products meeting their requirement prior to full scale
usage of our products. Since the correct identification of the problems, quality of other materials used,
and on-site workmanship are factors beyond our control, there are no expresses or implied
guarantee/warranty as to the results obtained. The company does not assume any liability or any
consequential damage for unsatisfactory results, arising from the use of our products.
TDS Ref : 009DCXXX/X.X/01.05.2020 009FR012/1.1/01.05.2020
Pidilite Industries Limited,
Ramkrishna Mandir Road, Post Box No. 17411, Andheri (E) Mumbai 400059 INDIA
Tel +91-22-2835 7000 • Fax +91-22-2835 7008
website:www.pidilite.com • E-mail:
[email protected] • Toll Free No.: 1800-266-6066
