Scribd
Upload
200 views1 page

Nozzle Neck

The document provides details on nozzle neck thickness and reinforced pad size for a storage tank according to API 650 standards. It lists the nozzle type and size, required and provided thickness for the neck and pad, and the required and provided outside diameter for the pad.

Uploaded by

manish318
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
200 views1 page

Nozzle Neck

The document provides details on nozzle neck thickness and reinforced pad size for a storage tank according to API 650 standards. It lists the nozzle type and size, required and provided thickness for the neck and pad, and the required and provided outside diameter for the pad.

Uploaded by

manish318
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Doc. No.

Nozzle Neck and RF Pad Details


VCE-EDS-0465-ST-REP-001
Tank No: PJ042-AST001 Rev : 0
API 650, 13th Ed,March-2020,Errata 1, January 2021

Shell and Roof Nozzles neck thickness and Reinforced Pad size shall be as per Table 5-6(a) of API 650.

Thickness, mm Reinforcement Pad size in mm


NPS
Outside Outside
Nozzle (inch) or Thickness Thickness
Required Provided SCH diameter diameter
DN required Provided
required Provided
A DN200 12.7 12.7 SCH 80 485 485 6 8
B DN100 10.97 10.97 SCH 80 - - - -
C DN80 7.62 7.62 SCH 80 265 265 6 6
D/J DN750 8 8 N/A 1545 1545 6 6
E/F/G/H DN150 10.97 10.97 SCH 80 400 400 6 8

Notes:
1)Manhole D/J bolting flange and cover thickness shall be 12 mm as per table 5.3a of API 650.
2) Shell Manhole M1 Shall be provided as per Figure 5-7A—Shell Manhole of API 650.
3) Roof Manhole M2 Shall be provided as per Figure 5-16—Roof Manhole of API 650.

You might also like