Scribd
Upload
187 views4 pages

EGO1 Heated Oxygen Sensor Guide

The EGO1 is an exhaust gas oxygen sensor that produces an output voltage between 0-1V depending on the air-fuel ratio in the exhaust stream, indicating if the ratio is lean or rich. It uses a zirconium dioxide cell to precisely measure the stoichiometric ratio of 14.7:1, outputting 0.45V. Coupled with an air-fuel ratio meter, it can generate accurate readings between ratios of 17.0:1 to 12.5:1. It has an internal heater to provide stable readings over a wide range of temperatures quickly after engine start.

Uploaded by

Betzabé De Anda
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
187 views4 pages

EGO1 Heated Oxygen Sensor Guide

The EGO1 is an exhaust gas oxygen sensor that produces an output voltage between 0-1V depending on the air-fuel ratio in the exhaust stream, indicating if the ratio is lean or rich. It uses a zirconium dioxide cell to precisely measure the stoichiometric ratio of 14.7:1, outputting 0.45V. Coupled with an air-fuel ratio meter, it can generate accurate readings between ratios of 17.0:1 to 12.5:1. It has an internal heater to provide stable readings over a wide range of temperatures quickly after engine start.

Uploaded by

Betzabé De Anda
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Exhaust Gas Oxygen Sensor

EGO1 Description:
The EGO1 is a precision, heated, 4-wire exhaust gas oxygen sensor. It produces an output voltage that varies from 0 V to 1V as the residual oxygen level in the exhaust gas stream ranges from lean to rich. The operation of the sensor is based on a zirconium dioxide cell which provides a precise indication of the stoichiometric air/fuel ratio of 14.7:1. At the stoichiometric point, the EGO1 produces an output voltage of 0.45 V. The transfer function of the sensor is less abrupt than other oxygen sensors which makes it possible to make valid readings over a wide range of air/fuel ratio. The output characteristics of the EGO1 are predictable, repeatable and well characterized. Coupled with a precise air/fuel ratio meter such as the Split Second ARM1, the EGO1 generates accurate readings ranging from 17.0:1 to 12.5:1. Tables and graphs showing output voltage vs. air /fuel ratio are contained in this data sheet. Due to its internal heater and wide operating temperature range, the EGO1 provides valid readings quickly after engine start and over a wide range of engine operating conditions including idle.

Features:
Generates calibrated outputs for air/fuel ratios ranging from 17.0:1 to 12.5:1 0V to 1.0 V output range Signal ground lead allows precise output voltage measurements Internal heater for stable, predictable readings Consistent output over 800F to 1400F temperature range

8/1/2002

Typical Connections:

WHITE WHITE

IGNITION SWITCH

BATTERY

BLACK GRAY

SIGNAL INPUT SIGNAL COMMON

ARM1

EGO1

Wire Assignments:
LABEL SIGO + SIGO Heater Heater DESCRIPTION Signal output (0 < SIGO+ < 1V) Signal common +12V Battery negative (chassis ground) WIRE COLOR Black Gray White* White*

Note: One of the white wires is tied to +12V and the other to chassis ground. The two white wires are interchangeable.

8/1/2002

Output Characteristics:
1 0.9 0.8 0.7 0.6 (V) 0.5 0.4 0.3 0.2 0.1 0 10 12 14 Air/Fuel Ratio (X:1) 16 18 750 F 1200 F 1500 F

Typical Display Characteristics with ARM1 Air/fuel Ratio Meter:


LED 1 2 3 4 5 6 7 8 9 10 COLOR RED RED ORANGE ORANGE YELLOW YELLOW GREEN GREEN BLUE BLUE MIN (V) 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 MAX (V) 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 A/F RATIO * 17.0:1 16.0:1 15.5:1 15.0:1 14.7:1 14.6:1 14.5:1 14.2:1 13.2:1 12.5:1 1.16 1.09 1.05 1.02 1 0.99 0.99 0.97 0.90 0.85

* Typical values at 1,200F. The EGO1 will produce similar readings over a temperature range of 800F to 1400F.

8/1/2002

Electrical Characteristics:
PARAMETER Output Voltage Output Resistance Output Resistance Heater Current Heater Current CONDITIONS Signal Out to Signal Common Cold Operating Temperature Cold Operating Temperature MIN 0 TYP >1 10 2.4 0.8 MAX 1.0 UNITS V M k A A

Mechanical Characteristics:
2.4 1.2

dimensions in inches unless otherwise stated

18mm/1.5mm pitch

1949 E. Deere Ave. Santa Ana, CA 92705 TEL (949) 863-1359 FAX (949) 863-1363

8/1/2002

You might also like